# Definitions

Hooks
are options containing functions to be run before or after
a function. For example, =org-mode-hook= can contain a list of functions to be called after org-mode is turned on.
Commands
are interactive functions that the user can run with =M-x
command RET=. Most commands have an associated keybinding, indicated here. Users can bind command to his preferred keybinding.
Options
are variables that the user can set through the customize
interface. Calling =M-x customize-variable RET= then completing over availables options will open the custom interface, which makes it easy to set an option.

These are the main "internals" that the uesr may want to know about, and we list them here for further reference. E.g. You can safely create links to https://orgmode.org/worg/doc.html#org-agenda to refer to the documentation of the org-agenda command.

On top of these symbols, there are other non-interactive functions and /variables/. You can get more documentation about them with C-h f org- TAB and C-h v org- TAB respectively.

# Hooks

:PROPERTIES: :CUSTOM_ID: hooks :END:

## org-checkbox-statistics-hook nil

Hook that is run whenever Org thinks checkbox statistics should be updated.

This hook runs even if checkbox rule in org-list-automatic-rules' does not apply, so it can be used to implement alternative ways of collecting statistics information.

## org-todo-setup-filter-hook nil

Hook for functions that pre-filter todo specs.

Each function takes a todo spec and returns either nil or the spec transformed into canonical form.

## org-timer-continue-hook nil

Hook run after relative or countdown timer is continued.

## org-clock-in-hook nil

Hook run when starting the clock.

Hook called in task selection just before prompting the user.

## org-property-allowed-value-functions nil

Hook for functions supplying allowed values for a specific property.

The functions must take a single argument, the name of the property, and return a flat list of allowed values. If ":ETC" is one of the values, this means that these values are intended as defaults for completion, but that other values should be allowed too. The functions must return nil if they are not responsible for this property.

## org-after-todo-state-change-hook (funcall (function (closure (f...

Hook which is run after the state of a TODO item was changed.

The new state (a string with a TODO keyword, or nil) is available in the Lisp variable org-state'.

## org-capture-prepare-finalize-hook (funcall (function (closure (o...

Hook that is run before the finalization starts.

The capture buffer is current and still narrowed.

## org-timer-stop-hook nil

Hook run before relative or countdown timer is stopped.

## org-metaleft-hook nil

Hook for functions attaching themselves to M-left'.

## org-export-filter-bold-functions nil

List of functions applied to transcoded bold text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-before-parsing-hook nil

Hook run before parsing an export buffer.

This is run after include keywords and macros have been expanded and Babel code blocks executed, on a copy of the original buffer being exported. Visibility and narrowing are preserved. Point is at the beginning of the buffer. Every function in this hook will be called with one argument: the back-end currently used, as a symbol.

## org-feed-before-adding-hook (funcall (function (closure (t...

Hook that is run before adding new feed items to a file.

You might want to commit the file in its current state to version control, for example.

## org-export-filter-diary-sexp-functions nil

List of functions applied to a transcoded diary-sexp.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-after-todo-statistics-hook nil

Hook that is called after a TODO statistics cookie has been updated.

Each function is called with two arguments: the number of not-done entries and the number of done entries. For example, the following function, when added to this hook, will switch an entry to DONE when all children are done, and back to TODO when new entries are set to a TODO status. Note that this hook is only called when there is a statistics cookie in the headline! (defun org-summary-todo (n-done n-not-done) "Switch entry to DONE when all subentries are done, to TODO otherwise." (let (org-log-done org-log-states) ; turn off logging (org-todo (if (= n-not-done 0) "DONE" "TODO"))))

## org-export-filter-export-block-functions nil

List of functions applied to a transcoded export-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-babel-after-execute-hook nil

Hook for functions to be called after org-babel-execute-src-block'

## org-icalendar-after-save-hook nil

Hook run after an iCalendar file has been saved.

This hook is run with the name of the file as argument. A good way to use this is to tell a desktop calendar application to re-read the iCalendar file.

## org-metaright-hook nil

Hook for functions attaching themselves to M-right'.

See org-ctrl-c-ctrl-c-hook' for more information.

## org-cycle-hook (funcall (function (closure (f...

Hook that is run after org-cycle' has changed the buffer visibility.

The function(s) in this hook must accept a single argument which indicates the new state that was set by the most recent org-cycle' command. The argument is a symbol. After a global state change, it can have the values overview', contents', or all'. After a local state change, it can have the values folded', children', or subtree'.

## org-export-filter-subscript-functions nil

List of functions applied to a transcoded subscript.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-entity-functions nil

List of functions applied to a transcoded entity.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-after-sorting-entries-or-items-hook nil

Hook that is run after a bunch of entries or items have been sorted.

When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.

## org-timer-done-hook nil

Hook run after countdown timer reaches zero.

## org-shiftmetaup-hook nil

Hook for functions attaching themselves to M-S-up'.

See org-ctrl-c-ctrl-c-hook' for more information.

## org-tab-after-check-for-table-hook nil

Hook for functions to attach themselves to TAB.

See org-ctrl-c-ctrl-c-hook' for more information. This hook runs after it has been established that the cursor is not in a table, but before checking if the cursor is in a headline or if global cycling should be done. If any function in this hook returns t, not other actions like visibility cycling will be done.

## org-open-at-point-functions nil

Hook that is run when following a link at point.

Functions in this hook must return t if they identify and follow a link at point. If they don't find anything interesting at point, they must return nil.

## org-property-changed-functions nil

Hook called when the value of a property has changed.

Each hook function should accept two arguments, the name of the property and the new value.

## orgstruct-mode-hook nil

Hook run after entering or leaving orgstruct-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-mobile-pre-push-hook nil

Hook run before running org-mobile-push'.

This could be used to clean up org-mobile-directory', for example to remove files that used to be included in the agenda but no longer are. The presence of such files would not really be a problem, but after time they may accumulate.

List of functions applied to a transcoded link.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-shiftright-final-hook nil

Hook for functions attaching themselves to S-right'.

This one runs after all other options except shift-select have been excluded. See org-ctrl-c-ctrl-c-hook' for more information.

## org-capture-mode-hook nil

Hook run after entering or leaving org-capture-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-mobile-post-pull-hook nil

Hook run after running org-mobile-pull', only if new items were found.

If Emacs does not have direct write access to the WebDAV directory used by the mobile device, this hook should be used to copy the emptied capture file mobileorg.org' back to the WebDAV directory, for example using rsync' or scp'.

## org-table-follow-field-mode-hook nil

Hook run after entering or leaving org-table-follow-field-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-export-filter-underline-functions nil

List of functions applied to transcoded underline text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-target-functions nil

List of functions applied to a transcoded target.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-shiftdown-hook nil

Hook for functions attaching themselves to S-down'.

## org-ctrl-c-ctrl-c-final-hook nil

Hook for functions attaching themselves to C-c C-c'.

This can be used to add additional functionality to the C-c C-c key which executes context-dependent commands. This hook is run after any other test, while org-ctrl-c-ctrl-c-hook' is run before the first test. Each function will be called with no arguments. The function must check if the context is appropriate for it to act. If yes, it should do its thing and then return a non-nil value. If the context is wrong, just do nothing and return nil.

## org-archive-hook nil

Hook run after successfully archiving a subtree.

Hook functions are called with point on the subtree in the original file. At this stage, the subtree has been added to the archive location, but not yet deleted from the original file.

## org-shiftleft-hook nil

Hook for functions attaching themselves to S-left'.

## org-todo-get-default-hook nil

Hook for functions that get a default item for todo.

Each function takes arguments (NEW-MARK OLD-MARK) and returns either nil or a string to be used for the todo mark.

## org-export-filter-body-functions nil

List of functions applied to transcoded body.

Each filter is called with three arguments: a string which contains no Org syntax, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-clock-cancel-hook nil

Hook run when canceling the current clock.

Hook for functions finding a plain text link.

These functions must take a single argument, the link content. They will be called for links that look like [[link text][description]] when LINK TEXT does not have a protocol like "http:" and does not look like a filename (e.g. "./blue.png"). These functions will be called *before* Org attempts to resolve the link by doing text searches in the current buffer - so if you want a link "[[target]]" to still find "<>", your function should handle this as a special case. When the function does handle the link, it must return a non-nil value. If it decides that it is not responsible for this link, it must return nil to indicate that that Org can continue with other options like exact and fuzzy text search.

## org-export-filter-code-functions nil

List of functions applied to transcoded code text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-shiftmetaright-hook nil

Hook for functions attaching themselves to M-S-right'.

## org-export-filter-keyword-functions nil

List of functions applied to a transcoded keyword.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-paragraph-functions nil

List of functions applied to a transcoded paragraph.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-horizontal-rule-functions nil

List of functions applied to a transcoded horizontal-rule.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-property-drawer-functions nil

List of functions applied to a transcoded property-drawer.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-shiftup-final-hook nil

Hook for functions attaching themselves to S-up'.

This one runs after all other options except shift-select have been excluded. See org-ctrl-c-ctrl-c-hook' for more information.

## org-export-filter-inline-src-block-functions nil

List of functions applied to a transcoded inline-src-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-stack-mode-hook nil

Hook run after entering Org-Stack mode.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-shiftright-hook nil

Hook for functions attaching themselves to S-right'.

See org-ctrl-c-ctrl-c-hook' for more information.

Hook run in a temporary buffer before writing the agenda to an export file.

A useful function for this hook is org-agenda-add-entry-text'.

## org-export-filter-italic-functions nil

List of functions applied to transcoded italic text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-babel-pre-tangle-hook (funcall (function (closure (t...

Hook run at the beginning of org-babel-tangle'.

## org-export-filter-plain-text-functions nil

List of functions applied to plain text.

Each filter is called with three arguments: a string which contains no Org syntax, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-agenda-after-show-hook nil

Normal hook run after an item has been shown from the agenda.

Point is in the buffer where the item originated.

## org-timer-start-hook nil

Hook run after relative timer is started.

## org-shiftleft-final-hook nil

Hook for functions attaching themselves to S-left'.

This one runs after all other options except shift-select have been excluded. See org-ctrl-c-ctrl-c-hook' for more information.

## org-agenda-mode-hook nil

Hook run after org-agenda-mode' is turned on.

The buffer is still writable when this hook is called.

## org-occur-hook (funcall (function (closure (f...

Hook that is run after org-occur' has constructed a sparse tree.

This can be used to recenter the window to show as much of the structure as possible.

## org-agenda-cleanup-fancy-diary-hook nil

Hook run when the fancy diary buffer is cleaned up.

## org-export-filter-item-functions nil

List of functions applied to a transcoded item.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

List of functions applied to a transcoded inlinetask.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-mode-hook (funcall (function (closure (f...

Hook run after entering Org mode.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-clock-in-prepare-hook nil

Hook run when preparing the clock.

This hook is run before anything happens to the task that you want to clock in. For example, you can use this hook to add an effort property.

List of functions applied to a transcoded headline.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-timer-set-hook nil

Hook run after countdown timer is set.

## org-export-filter-table-cell-functions nil

List of functions applied to a transcoded table-cell.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-speed-command-hook (funcall (function (closure (o...

Hook for activating speed commands at strategic locations.

Hook functions are called in sequence until a valid handler is found. Each hook takes a single argument, a user-pressed command key which is also a self-insert-command' from the global map. Within the hook, examine the cursor position and the command key and return nil or a valid handler as appropriate. Handler could be one of an interactive command, a function, or a form. Set org-use-speed-commands' to non-nil value to enable this hook. The default setting is org-speed-command-activate'.

## org-metaup-hook nil

Hook for functions attaching themselves to M-up'.

See org-ctrl-c-ctrl-c-hook' for more information.

## org-ctrl-c-ctrl-c-hook nil

Hook for functions attaching themselves to C-c C-c'.

This can be used to add additional functionality to the C-c C-c key which executes context-dependent commands. This hook is run before any other test, while org-ctrl-c-ctrl-c-final-hook' is run after the last test. Each function will be called with no arguments. The function must check if the context is appropriate for it to act. If yes, it should do its thing and then return a non-nil value. If the context is wrong, just do nothing and return nil.

## orgtbl-mode-hook nil

Hook run after entering or leaving orgtbl-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-load-hook (funcall (function (closure (f...

Hook that is run after org.el has been loaded.

## org-todo-statistics-hook nil

Hook that is run whenever Org thinks TODO statistics should be updated.

This hook runs even if there is no statistics cookie present, in which case org-after-todo-statistics-hook' would not run.

## org-pre-cycle-hook (funcall (function (closure (f...

Hook that is run before visibility cycling is happening.

The function(s) in this hook must accept a single argument which indicates the new state that will be set right after running this hook. The argument is a symbol. Before a global state change, it can have the values overview', content', or all'. Before a local state change, it can have the values folded', children', or subtree'.

## org-export-filter-planning-functions nil

List of functions applied to a transcoded planning.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-options-functions nil

List of functions applied to the export options.

Each filter is called with two arguments: the export options, as a plist, and the back-end, as a symbol. It must return a property list containing export options.

## orgstruct-setup-hook (funcall (function (closure (o...

Hook run after orgstruct-mode-map is filled.

## org-capture-after-finalize-hook (funcall (function (closure (o...

Hook that is run right after a capture process is finalized.

Suitable for window cleanup.

## org-mobile-before-process-capture-hook nil

Hook that is run after content was moved to org-mobile-inbox-for-pull'.

The inbox file is visited by the current buffer, and the buffer is narrowed to the newly captured data.

List of functions applied to a transcoded statistics-cookie.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-dynamic-block-functions nil

List of functions applied to a transcoded dynamic-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-quote-block-functions nil

List of functions applied to a transcoded quote block.

Each filter is called with three arguments: the transcoded quote data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-mobile-post-push-hook nil

Hook run after running org-mobile-push'.

If Emacs does not have direct write access to the WebDAV directory used by the mobile device, this hook should be used to copy all files from the local staging directory org-mobile-directory' to the WebDAV directory, for example using rsync' or scp'.

## org-export-before-processing-hook nil

Hook run at the beginning of the export process.

This is run before include keywords and macros are expanded and Babel code blocks executed, on a copy of the original buffer being exported. Visibility and narrowing are preserved. Point is at the beginning of the buffer. Every function in this hook will be called with one argument: the back-end currently used, as a symbol.

## org-export-filter-clock-functions nil

List of functions applied to a transcoded clock.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-superscript-functions nil

List of functions applied to a transcoded superscript.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-verbatim-functions nil

List of functions applied to transcoded verbatim text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

List of functions applied to a transcoded radio-target.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-footnote-definition-functions nil

List of functions applied to a transcoded footnote-definition.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-cdlatex-mode-hook nil

Hook run after entering or leaving org-cdlatex-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-export-filter-center-block-functions nil

List of functions applied to a transcoded center block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-plain-list-functions nil

List of functions applied to a transcoded plain-list.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-strike-through-functions nil

List of functions applied to transcoded strike-through text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-parse-tree-functions nil

List of functions applied to the parsed tree.

Each filter is called with three arguments: the parse tree, as returned by org-element-parse-buffer', the back-end, as a symbol, and the communication channel, as a plist. It must return the modified parse tree to transcode.

## org-publish-after-publishing-hook nil

Hook run each time a file is published.

Every function in this hook will be called with two arguments: the name of the original file and the name of the file produced.

## org-clock-out-hook nil

Hook run when stopping the current clock.

Hook that is run after a link has been followed.

## org-metareturn-hook nil

Hook for functions attaching themselves to M-RET'.

## org-after-demote-entry-hook nil

Hook run after an entry has been demoted.

The cursor will be at the beginning of the entry. When a subtree is being demoted, the hook will be called for each node.

## org-shiftdown-final-hook nil

Hook for functions attaching themselves to S-down'.

This one runs after all other options except shift-select have been excluded. See org-ctrl-c-ctrl-c-hook' for more information.

## org-export-filter-table-row-functions nil

List of functions applied to a transcoded table-row.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-beamer-mode-hook nil

Hook run after entering or leaving org-beamer-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-after-promote-entry-hook nil

Hook run after an entry has been promoted.

The cursor will be at the beginning of the entry. When a subtree is being promoted, the hook will be called for each node.

## org-after-tags-change-hook nil

Hook that is run after the tags in a line have changed.

## org-after-refile-insert-hook nil

Hook run after org-refile' has inserted its stuff at the new location.

Note that this is still *before* the stuff will be removed from the *old* location.

## org-export-filter-drawer-functions nil

List of functions applied to a transcoded drawer.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-example-block-functions nil

List of functions applied to a transcoded example-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-capture-before-finalize-hook (funcall (function (closure (o...

Hook that is run right before a capture process is finalized.

The capture buffer is still current when this hook runs and it is widened to the entire buffer.

## org-execute-file-search-functions nil

List of functions to execute a file search triggered by a link.

Functions added to this hook must accept a single argument, the search string that was part of the file link, the part after the double colon. The function must first check if it would like to handle this search, for example by checking the major-mode' or the file extension. If it decides not to handle this search, it should just return nil to give other functions a chance. If it does handle the search, it must return a non-nil value to keep other functions from trying. Each function can access the current prefix argument through the variable current-prefix-arg'. Note that a single prefix is used to force opening a link in Emacs, so it may be good to only use a numeric or double prefix to guide the search function. In case this is needed, a function in this hook can also restore the window configuration before org-open-at-point' was called using: (set-window-configuration org-window-config-before-follow-link)

## org-export-filter-export-snippet-functions nil

List of functions applied to a transcoded export-snippet.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-timer-pause-hook nil

Hook run before relative or countdown timer is paused.

## org-agenda-bulk-custom-functions nil

Alist of characters and custom functions for bulk actions.

For example, this value makes those two functions available: \='((?R set-category) (?C bulk-cut)) With selected entries in an agenda buffer, B R' will call the custom function set-category' on the selected entries. Note that functions in this alist don't need to be quoted.

## org-export-filter-babel-call-functions nil

List of functions applied to a transcoded babel-call.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-reveal-start-hook nil

Hook run before revealing a location.

## org-export-filter-latex-fragment-functions nil

List of functions applied to a transcoded latex-fragment.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-latex-environment-functions nil

List of functions applied to a transcoded latex-environment.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-tab-after-check-for-cycling-hook nil

Hook for functions to attach themselves to TAB.

See org-ctrl-c-ctrl-c-hook' for more information. This hook runs after it has been established that not table field motion and not visibility should be done because of current context. This is probably the place where a package like yasnippets can hook in.

## org-log-buffer-setup-hook (funcall (function (closure (f...

Hook that is run after an Org log buffer is created.

## org-babel-tangle-body-hook (funcall (function (closure (t...

Hook run over the contents of each code block body.

## org-export-filter-timestamp-functions nil

List of functions applied to a transcoded timestamp.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-fixed-width-functions nil

List of functions applied to a transcoded fixed-width.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-insert-heading-hook (funcall (function (closure (f...

Hook being run after inserting a new heading.

Hook for functions attaching themselves to M-S-down'.

See org-ctrl-c-ctrl-c-hook' for more information.

## org-shiftup-hook nil

Hook for functions attaching themselves to S-up'.

See org-ctrl-c-ctrl-c-hook' for more information.

## org-shiftmetaleft-hook nil

Hook for functions attaching themselves to M-S-left'.

See org-ctrl-c-ctrl-c-hook' for more information.

## org-lint--report-mode-hook nil

Hook run after entering OrgLint mode.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

List of functions to be prepended to ORG-OPEN-LINK-FUNCTIONS when ORG-CTAGS is active.

## org-babel-post-tangle-hook (funcall (function (closure (t...

Hook run in code files tangled by org-babel-tangle'.

## org-tab-first-hook nil

Hook for functions to attach themselves to TAB.

See org-ctrl-c-ctrl-c-hook' for more information. This hook runs as the first action when TAB is pressed, even before org-cycle' messes around with the outline-regexp' to cater for inline tasks and plain list item folding. If any function in this hook returns t, any other actions that would have been caused by TAB (such as table field motion or visibility cycling) will not occur.

## org-agenda-finalize-hook nil

Hook run just before displaying an agenda buffer.

The buffer is still writable when the hook is called. You can modify some of the buffer substrings but you should be extra careful not to modify the text properties of the agenda headlines as the agenda display heavily relies on them.

## org-clock-goto-hook nil

Hook run when selecting the currently clocked-in entry.

## orgtbl-after-send-table-hook nil

Hook for functions attaching to C-c C-c', if the table is sent.

This can be used to add additional functionality after the table is sent to the receiver position, otherwise, if table is not sent, the functions are not run.

## org-export-filter-footnote-reference-functions nil

List of functions applied to a transcoded footnote-reference.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-line-break-functions nil

List of functions applied to a transcoded line-break.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-inline-babel-call-functions nil

List of functions applied to a transcoded inline-babel-call.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-font-lock-set-keywords-hook nil

Functions that can manipulate org-font-lock-extra-keywords'.

This is called after org-font-lock-extra-keywords' is defined, but before it is installed to be used by font lock. This can be useful if something needs to be inserted at a specific position in the font-lock sequence.

## org-mobile-pre-pull-hook nil

Hook run before executing org-mobile-pull'.

If Emacs does not have direct write access to the WebDAV directory used by the mobile device, this hook should be used to copy the capture file mobileorg.org' from the WebDAV location to the local staging directory org-mobile-directory'.

## org-font-lock-hook nil

Functions to be called for special font lock stuff.

## org-export-filter-final-output-functions nil

List of functions applied to the transcoded string.

Each filter is called with three arguments: the full transcoded string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string that will be used as the final export output.

## org-indent-mode-hook nil

Hook run after entering or leaving org-indent-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-export-filter-special-block-functions nil

List of functions applied to a transcoded special block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-table-functions nil

List of functions applied to a transcoded table.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-feed-after-adding-hook (funcall (function (closure (t...

Hook that is run after new items have been added to a file.

Depending on org-feed-save-after-adding', the buffer will already have been saved.

## org-trigger-hook nil

Hook for functions that are triggered by a state change.

Each function gets as its single argument a property list with at least the following elements: (:type type-of-change :position pos-at-entry-start :from old-state :to new-state) Depending on the type, more properties may be present. This mechanism is currently implemented for: TODO state changes ------------------ :type todo-state-change :from previous state (keyword as a string), or nil, or a symbol todo' or done', to indicate the general type of state. :to new state, like in :from

## org-blocker-hook nil

Hook for functions that are allowed to block a state change.

Functions in this hook should not modify the buffer. Each function gets as its single argument a property list, see org-trigger-hook' for more information about this list. If any of the functions in this hook returns nil, the state change is blocked.

## org-export-filter-src-block-functions nil

List of functions applied to a transcoded src-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-tab-before-tab-emulation-hook nil

Hook for functions to attach themselves to TAB.

See org-ctrl-c-ctrl-c-hook' for more information. This hook runs after every other options for TAB have been exhausted, but before indentation and insertion takes place.

## org-export-filter-node-property-functions nil

List of functions applied to a transcoded node-property.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-agenda-entry-text-cleanup-hook nil

Hook that is run after basic cleanup of entry text to be shown in agenda.

This cleanup is done in a temporary buffer, so the function may inspect and change the entire buffer. Some default stuff like drawers and scheduling/deadline dates will already have been removed when this is called, as will any matches for regular expressions listed in org-agenda-entry-text-exclude-regexps'.

## org-create-file-search-functions nil

List of functions to construct the right search string for a file link.

These functions are called in turn with point at the location to which the link should point. A function in the hook should first test if it would like to handle this file type, for example by checking the major-mode' or the file extension. If it decides not to handle this file, it should just return nil to give other functions a chance. If it does handle the file, it must return the search string to be used when following the link. The search string will be part of the file link, given after a double colon, and org-open-at-point' will automatically search for it. If special measures must be taken to make the search successful, another function should be added to the companion hook org-execute-file-search-functions', which see. A function in this hook may also use setq' to set the variable description' to provide a suggestion for the descriptive text to be used for this link when it gets inserted into an Org buffer with \[org-insert-link].

## org-src-mode-hook nil

Hook run after entering or leaving org-src-mode'.

No problems result if this variable is not bound. add-hook' automatically binds it. (This is true for all hook variables.)

## org-export-filter-section-functions nil

List of functions applied to a transcoded section.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

## org-export-filter-verse-block-functions nil

List of functions applied to a transcoded verse block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

Hook for functions attaching themselves to M-down'.

# Commands

See org-ctrl-c-ctrl-c-hook' for more information.

:PROPERTIES: :CUSTOM_ID: commands :END:

## org-agenda-previous-date-line (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-agenda-previous-date-line :END:

## org-table-previous-field

:PROPERTIES: :CUSTOM_ID: org-table-previous-field :END:

## org-time-stamp-inactive (&optional arg)

Go to the previous field in the table.
Before doing so, re-align the table if necessary.

:PROPERTIES: :CUSTOM_ID: org-time-stamp-inactive :END:

## org-edit-latex-environment

Insert an inactive time stamp.
An inactive time stamp is enclosed in square brackets instead of angle
brackets.  It is inactive in the sense that it does not trigger agenda entries,
does not link to the calendar and cannot be changed with the S-cursor keys.
So these are more for recording a certain time/date.

:PROPERTIES: :CUSTOM_ID: org-edit-latex-environment :END:

## org-table-move-column-left

Edit LaTeX environment at point.

The LaTeX environment is copied into a new buffer.  Major mode is
set to the one associated to "latex" in ‘org-src-lang-modes’,
or to ‘latex-mode’ if there is none.

When done, exit with ‘C-c '’.  The edited text will then replace
the LaTeX environment in the Org mode buffer.

:PROPERTIES: :CUSTOM_ID: org-table-move-column-left :END:

## org-switchb (&optional arg)

Move column to the left.

:PROPERTIES: :CUSTOM_ID: org-switchb :END:

## org-do-demote

Switch between Org buffers.

With ‘C-u’ prefix, restrict available buffers to files.

With ‘C-u C-u’ prefix, restrict available buffers to agenda files.

:PROPERTIES: :CUSTOM_ID: org-do-demote :END:

## org-attach-reveal (&optional if-exists)

Demote the current heading lower down the tree.
If the region is active in ‘transient-mark-mode’, demote all

:PROPERTIES: :CUSTOM_ID: org-attach-reveal :END:

## org-lint--show-source

Show the attachment directory of the current task.
This will attempt to use an external program to show the directory.

:PROPERTIES: :CUSTOM_ID: org-lint--show-source :END:

## org-toggle-archive-tag (&optional find-done)

Show source line that generated the report at point.

:PROPERTIES: :CUSTOM_ID: org-toggle-archive-tag :END:

## org-plot/collect-options (&optional params)

Toggle the archive tag for the current headline.
With prefix ARG, check all children of current headline and offer tagging
the children that do not contain any open TODO items.

:PROPERTIES: :CUSTOM_ID: org-plot/collect-options :END:

## org-babel-lob-ingest (&optional file)

Collect options from an org-plot ‘#+Plot:’ line.
Accepts an optional property list PARAMS, to which the options
will be added.  Returns the resulting property list.

:PROPERTIES: :CUSTOM_ID: org-babel-lob-ingest :END:

## org-columns-delete

Add all named source blocks defined in FILE to ‘org-babel-library-of-babel’.

:PROPERTIES: :CUSTOM_ID: org-columns-delete :END:

## org-beginning-of-item

Delete the column at point from columns view.

:PROPERTIES: :CUSTOM_ID: org-beginning-of-item :END:

## org-property-action

Go to the beginning of the current item.
Throw an error when not in a list.

:PROPERTIES: :CUSTOM_ID: org-property-action :END:

## org-eww-copy-for-org-mode

Do an action on properties.

:PROPERTIES: :CUSTOM_ID: org-eww-copy-for-org-mode :END:

## org-drag-line-backward (arg)

Copy current buffer content or active region with ‘org-mode’ style links.
‘org-make-link-string’, and insert the transformed test into the kill ring,
so that it can be yanked into an Org mode buffer with links working correctly.

Further lines starting with a star get quoted with a comma to keep
the structure of the Org file.

:PROPERTIES: :CUSTOM_ID: org-drag-line-backward :END:

Drag the line at point ARG lines backward.

## org-cdlatex-mode (&optional arg)

Keep only those lines that are descendants from the same top headline.
The top headline is that of the current line.

:PROPERTIES: :CUSTOM_ID: org-cdlatex-mode :END:

## org-babel-examplify-region (beg end &optional results-switches inline)

Toggle the minor ‘org-cdlatex-mode’.
This mode supports entering LaTeX environment and math in LaTeX fragments
in Org mode.
key             binding
---             -------

C-c		Prefix Command
'		org-cdlatex-math-modify
^ .. _		org-cdlatex-underscore-caret
cdlatex-math-symbol

C-c {		org-cdlatex-environment-indent

:PROPERTIES: :CUSTOM_ID: org-babel-examplify-region :END:

## org-agenda-undo

Comment out region using the inline ‘==’ or ‘: ’ org example quote.

:PROPERTIES: :CUSTOM_ID: org-agenda-undo :END:

## org-end-of-item

Undo a remote editing step in the agenda.
This undoes changes both in the agenda buffer and in the remote buffer
that have been changed along.

:PROPERTIES: :CUSTOM_ID: org-end-of-item :END:

## org-timer-set-timer (&optional opt)

Go to the end of the current item.
Throw an error when not in a list.

:PROPERTIES: :CUSTOM_ID: org-timer-set-timer :END:

## org-md-export-as-markdown (&optional async subtreep visible-only)

Prompt for a duration in minutes or hh:mm:ss and set a timer.

If ‘org-timer-default-timer’ is not "0", suggest this value as
the default duration for the timer.  If a timer is already set,
prompt the user if she wants to replace it.

Called with a numeric prefix argument, use this numeric value as
the duration of the timer in minutes.

Called with a ‘C-u’ prefix arguments, use ‘org-timer-default-timer’
without prompting the user for a duration.

With two ‘C-u’ prefix arguments, use ‘org-timer-default-timer’
without prompting the user for a duration and automatically
replace any running timer.

By default, the timer duration will be set to the number of
minutes in the Effort property, if any.  You can ignore this by
using three ‘C-u’ prefix arguments.

:PROPERTIES: :CUSTOM_ID: org-md-export-as-markdown :END:

## org-agenda-clockreport-mode

Export current buffer to a Markdown buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the ‘org-export-stack’ interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don’t export
contents of hidden elements.

Export is done in a buffer named "*Org MD Export*", which will
be displayed when ‘org-export-show-temporary-export-buffer’ is
non-nil.

:PROPERTIES: :CUSTOM_ID: org-agenda-clockreport-mode :END:

## org-shiftcontrolright

Toggle clocktable mode in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-shiftcontrolright :END:

• Access: <C-S-right>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Next keyword set>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Previous keyword set>
• In file: org.el
• Find modifications in git logs

## org-schedule (arg &optional time)

Switch to next TODO set.

:PROPERTIES: :CUSTOM_ID: org-schedule :END:

## org-agenda-set-effort

Insert the SCHEDULED: string with a timestamp to schedule a TODO item.
With one universal prefix argument, remove any scheduling date from the item.
With two universal prefix arguments, prompt for a delay cookie.
With argument TIME, scheduled at the corresponding date.  TIME can
either be an Org date like "2011-07-24" or a delta like "+2d".

:PROPERTIES: :CUSTOM_ID: org-agenda-set-effort :END:

## org-table-fedit-abort

Set the effort property for the current headline.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-abort :END:

Abort editing formulas, without installing the changes.

## org-babel-screen-test

Toggle inclusion of entries with a deadline in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-babel-screen-test :END:

## org-agenda-execute (arg)

Test if the default setup works.
The terminal should shortly flicker.

:PROPERTIES: :CUSTOM_ID: org-agenda-execute :END:

## org-convert-to-odd-levels

Execute another agenda command, keeping same window.
So this is just a shortcut for ‘C-c a’, available
in the agenda.

:PROPERTIES: :CUSTOM_ID: org-convert-to-odd-levels :END:

## org-table-convert

Convert an Org file with all levels allowed to one with odd levels.
This will leave level 1 alone, convert level 2 to level 3, level 3 to
level 5 etc.

:PROPERTIES: :CUSTOM_ID: org-table-convert :END:

## org-table-create-or-convert-from-region (arg)

Convert from ‘org-mode’ table to table.el and back.
Obviously, this only works within limits.  When an Org table is converted
to table.el, all horizontal separator lines get lost, because table.el uses
these as cell boundaries and has no notion of horizontal lines.  A table.el
table can be converted to an Org table only if it does not do row or column
spanning.  Multiline cells will become multiple cells.  Beware, Org mode
does not test if the table can be successfully converted - it blindly
applies a recipe that works for simple tables.

:PROPERTIES: :CUSTOM_ID: org-table-create-or-convert-from-region :END:

## org-plot/gnuplot-to-grid-data (table data-file params)

Convert region to table, or create an empty table.
If there is an active region, convert it to a table, using the function
‘org-table-convert-region’.  See the documentation of that function
to learn how the prefix argument is interpreted to determine the field
separator.
If there is no such region, create an empty table with ‘org-table-create’.

:PROPERTIES: :CUSTOM_ID: org-plot/gnuplot-to-grid-data :END:

## org-columns-set-tags-or-toggle (&optional _arg)

Export the data in TABLE to DATA-FILE for gnuplot.
This means in a format appropriate for grid plotting by gnuplot.
PARAMS specifies which columns of TABLE should be plotted as independent
and dependant variables.

:PROPERTIES: :CUSTOM_ID: org-columns-set-tags-or-toggle :END:

## org-table-delete-column

Toggle checkbox at point, or set tags for current headline.

:PROPERTIES: :CUSTOM_ID: org-table-delete-column :END:

## org-agenda-show-clocking-issues

Delete a column from the table.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-clocking-issues :END:

## org-babel-tangle (&optional arg target-file lang)

Add overlays, showing issues with clocking.

:PROPERTIES: :CUSTOM_ID: org-babel-tangle :END:

## org-babel-shell-initialize

Write code blocks to source-specific files.
Extract the bodies of all source code blocks from the current
file into their own source-specific files.
With one universal prefix argument, only tangle the block at point.
When two universal prefix arguments, only tangle blocks for the
tangle file of the block at point.
Optional argument TARGET-FILE can be used to specify a default
export file for all source blocks.  Optional argument LANG can be
used to limit the exported source code blocks by language.

:PROPERTIES: :CUSTOM_ID: org-babel-shell-initialize :END:

## org-agenda-archive-default-with-confirmation

Define execution functions associated to shell names.
This function has to be called whenever ‘org-babel-shell-names’
is modified outside the Customize interface.

:PROPERTIES: :CUSTOM_ID: org-agenda-archive-default-with-confirmation :END:

## org-agenda-remove-restriction-lock (&optional noupdate)

Archive the entry or subtree belonging to the current agenda entry.

:PROPERTIES: :CUSTOM_ID: org-agenda-remove-restriction-lock :END:

## org-icalendar-export-to-ics (&optional async subtreep visible-only body-only)

Remove the agenda restriction lock.

:PROPERTIES: :CUSTOM_ID: org-icalendar-export-to-ics :END:

## org-bibtex (filename)

Export current buffer to an iCalendar file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the ‘org-export-stack’ interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don’t export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "BEGIN:VCALENDAR" and "END:VCALENDAR".

Return ICS file name.

:PROPERTIES: :CUSTOM_ID: org-bibtex :END:

## org-table-blank-field

Export each headline in the current file to a bibtex entry.

:PROPERTIES: :CUSTOM_ID: org-table-blank-field :END:

## org-src-associate-babel-session (info)

Blank the current table field or active region.

:PROPERTIES: :CUSTOM_ID: org-src-associate-babel-session :END:

## org-ctrl-c-minus

Associate edit buffer with comint session.

:PROPERTIES: :CUSTOM_ID: org-ctrl-c-minus :END:

## org-update-checkbox-count (&optional all)

Insert separator line in table or modify bullet status of line.
Also turns a plain line or a region of lines into list items.
Calls ‘org-table-insert-hline’, ‘org-toggle-item’, or
‘org-cycle-list-bullet’, depending on context.

:PROPERTIES: :CUSTOM_ID: org-update-checkbox-count :END:

## org-agenda-redo (&optional all)

Update the checkbox statistics in the current section.

This will find all statistic cookies like [57%] and [6/12] and
update them with the current numbers.

With optional prefix argument ALL, do this for the whole buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-redo :END:

## org-agenda-show-tags

Rebuild possibly ALL agenda view(s) in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-tags :END:

Show the tags applicable to the current item.

## org-attach-sync

Manipulate the query by adding a search regexp with positive selection.
Positive selection means the regexp must match for selection of an entry.

:PROPERTIES: :CUSTOM_ID: org-attach-sync :END:

## org-babel-view-src-block-info

Synchronize the current tasks with its attachments.
This can be used after files have been added externally.

:PROPERTIES: :CUSTOM_ID: org-babel-view-src-block-info :END:

## org-table-current-column

Display information on the current source block.
This includes header arguments, language and name, and is largely
a window into the ‘org-babel-get-src-block-info’ function.

:PROPERTIES: :CUSTOM_ID: org-table-current-column :END:

## org-toggle-tags-groups

Find out which column we are in.

:PROPERTIES: :CUSTOM_ID: org-toggle-tags-groups :END:

## org-agenda-quit

Toggle support for group tags.
Support for group tags is controlled by the option
‘org-group-tags’, which is non-nil by default.

:PROPERTIES: :CUSTOM_ID: org-agenda-quit :END:

## org-timer-stop

Exit the agenda.

When ‘org-agenda-sticky’ is non-nil, bury the agenda buffer

When ‘org-agenda-restore-windows-after-quit’ is non-nil, restore
the pre-agenda window configuration.

When column view is active, exit column view instead of the
agenda.

:PROPERTIES: :CUSTOM_ID: org-timer-stop :END:

Stop the relative or countdown timer.

## org-clock-cancel

Insert a header argument selecting from lists of common args and values.

:PROPERTIES: :CUSTOM_ID: org-clock-cancel :END:

## org-agenda-log-mode (&optional special)

Cancel the running clock by removing the start timestamp.

:PROPERTIES: :CUSTOM_ID: org-agenda-log-mode :END:

## org-reset-checkbox-state-subtree

Toggle log mode in an agenda buffer.

With argument SPECIAL, show all possible log items, not only the ones
configured in ‘org-agenda-log-mode-items’.

With a ‘C-u C-u’ prefix, show *only* log items, nothing else.

:PROPERTIES: :CUSTOM_ID: org-reset-checkbox-state-subtree :END:

## org-property-next-allowed-value (&optional previous)

Reset all checkboxes in an entry subtree.

:PROPERTIES: :CUSTOM_ID: org-property-next-allowed-value :END:

Switch to the next allowed value for this property.

## org-table-insert-hline (&optional above)

Insert a radio table template appropriate for this major mode.

:PROPERTIES: :CUSTOM_ID: org-table-insert-hline :END:

## org-todo (&optional arg)

Insert a horizontal-line below the current line into the table.
With prefix ABOVE, insert above the current line.

:PROPERTIES: :CUSTOM_ID: org-todo :END:

## org-set-tags-to (data)

Change the TODO state of an item.

The state of an item is given by a keyword at the start of the heading,
like
*** TODO Write paper
*** DONE Call mom

The different keywords are specified in the variable ‘org-todo-keywords’.
By default the available states are "TODO" and "DONE".  So, for this
example: when the item starts with TODO, it is changed to DONE.
When it starts with DONE, the DONE is removed.  And when neither TODO nor

With ‘C-u’ prefix ARG, use completion to determine the new state.
With numeric prefix ARG, switch to that state.
With a ‘C-u C-u’ prefix, switch to the next set of TODO keywords (nextset).
With a ‘C-u C-u C-u’ prefix, circumvent any state blocking.
With a numeric prefix arg of 0, inhibit note taking for the change.
With a numeric prefix arg of -1, cancel repeater to allow marking as DONE.

When called through ELisp, arg is also interpreted in the following way:
‘none’        -> empty state
""            -> switch to empty state
‘done’        -> switch to DONE
‘nextset’     -> switch to the next set of keywords
‘previousset’ -> switch to the previous set of keywords
"WAITING"     -> switch to the specified keyword, but only if it
really is a member of ‘org-todo-keywords’.

:PROPERTIES: :CUSTOM_ID: org-set-tags-to :END:

## org-agenda-goto-date (span)

Set the tags of the current entry to DATA, replacing the current tags.
DATA may be a tags string like :aa:bb:cc:, or a list of tags.
If DATA is nil or the empty string, any tags will be removed.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-date :END:

## org-preview-latex-fragment (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-preview-latex-fragment :END:

Preview the LaTeX fragment at point, or all locally or globally.

If the cursor is on a LaTeX fragment, create the image and overlay
it over the source code, if there is none.  Remove it otherwise.
If there is no fragment at point, display all fragments in the
current section.

With prefix ARG, preview or clear image for all fragments in the
current subtree or in the whole buffer when used before the first
headline.  With a prefix ARG ‘C-u C-u’ preview or clear images
for all fragments in the buffer.

## org-table-move-row-down

:PROPERTIES: :CUSTOM_ID: org-table-move-row-down :END:

## org-archive-set-tag

Move table row down.

:PROPERTIES: :CUSTOM_ID: org-archive-set-tag :END:

## org-info (&optional node)

Set the ARCHIVE tag.

:PROPERTIES: :CUSTOM_ID: org-info :END:

## org-goto-right

Read documentation for Org in the info system.
With optional NODE, go directly to that node.

:PROPERTIES: :CUSTOM_ID: org-goto-right :END:

## org-sort-list (&optional with-case sorting-type getkey-func compare-func interactive?)

Finish ‘org-goto’ by going to the new location.

:PROPERTIES: :CUSTOM_ID: org-sort-list :END:

## org-agenda-clock-in (&optional arg)

Sort list items.
The cursor may be at any item of the list that should be sorted.
Sublists are not sorted.  Checkboxes, if any, are ignored.

Sorting can be alphabetically, numerically, by date/time as given
by a time stamp, by a property or by priority.

Comparing entries ignores case by default.  However, with an
optional argument WITH-CASE, the sorting considers case as well.

The command prompts for the sorting type unless it has been given
to the function through the SORTING-TYPE argument, which needs to
be a character, (?n ?N ?a ?A ?t ?T ?f ?F ?x ?X).  Here is the
detailed meaning of each character:

n   Numerically, by converting the beginning of the item to a number.
a   Alphabetically.  Only the first line of item is checked.
t   By date/time, either the first active time stamp in the entry, if
any, or by the first inactive one.  In a timer list, sort the timers.
x   By "checked" status of a check list.

Capital letters will reverse the sort order.

If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies
a function to be called with point at the beginning of the
record.  It must return a value that is compatible with COMPARE-FUNC,
the function used to compare entries.

Sorting is done against the visible part of the headlines, it

A non-nil value for INTERACTIVE? is used to signal that this
function is being called interactively.

:PROPERTIES: :CUSTOM_ID: org-agenda-clock-in :END:

## org-metaup (&optional _arg)

Start the clock on the currently selected item.

:PROPERTIES: :CUSTOM_ID: org-metaup :END:

## org-indent-line

Move subtree up or move table row up.
Calls ‘org-move-subtree-up’ or ‘org-table-move-row’ or
‘org-move-item-up’, depending on context.  See the individual commands

:PROPERTIES: :CUSTOM_ID: org-indent-line :END:

## org-agenda-show-the-flagging-note

Indent line depending on context.

Indentation is done according to the following rules:

have to start at column 0.

- On the very first line of an element, consider, in order, the
next rules until one matches:

1. If there’s a sibling element before, ignoring footnote
definitions and inline tasks, indent like its first line.

2. If element has a parent, indent like its contents.  More
precisely, if parent is an item, indent after the
description part, if any, or the bullet (see
‘org-list-description-max-indent’).  Else, indent like
parent’s first line.

3. Otherwise, indent relatively to current level, if
‘org-adapt-indentation’ is non-nil, or to left margin.

- On a blank line at the end of an element, indent according to
the type of the element.  More precisely

1. If element is a plain list, an item, or a footnote
definition, indent like the very last element within.

2. If element is a paragraph, indent like its last non blank
line.

3. Otherwise, indent like its very first line.

- In the code part of a source block, use language major mode
to indent current line if ‘org-src-tab-acts-natively’ is
non-nil.  If it is nil, do nothing.

- Otherwise, indent like the first non-blank line above.

The function doesn’t indent an item as it could break the whole
list structure.  Instead, use ‘’ or ‘’.

Also align node properties according to ‘org-property-format’.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-the-flagging-note :END:

## org-agenda-entry-text-show

Display the flagging note in the other window.
When called a second time in direct sequence, offer to remove the FLAGGING
tag and (if present) the flagging note.

:PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-show :END:

## org-date-from-calendar

Add entry context for all agenda lines.

:PROPERTIES: :CUSTOM_ID: org-date-from-calendar :END:

## org-insert-drawer (&optional arg drawer)

Insert time stamp corresponding to cursor date in *Calendar* buffer.
If there is already a time stamp at the cursor position, update it.

:PROPERTIES: :CUSTOM_ID: org-insert-drawer :END:

## org-ctags-find-tag (name)

Insert a drawer at point.

When optional argument ARG is non-nil, insert a property drawer.

Optional argument DRAWER, when non-nil, is a string representing
drawer’s name.  Otherwise, the user is prompted for a name.

If a region is active, insert the drawer around that region

Point is left between drawer’s boundaries.

:PROPERTIES: :CUSTOM_ID: org-ctags-find-tag :END:

## org-agenda-year-view (&optional year)

This function is intended to be used in ORG-OPEN-LINK-FUNCTIONS.
Look for a tag called ‘NAME’ in the current TAGS table.  If it is found,
visit the file and location where the tag is found.

:PROPERTIES: :CUSTOM_ID: org-agenda-year-view :END:

## org-babel-result-hide-all

Switch to yearly view for agenda.
With argument YEAR, switch to that year.  Years ranging from 70
years ago to 30 years in the future can also be written as
2-digit years.

:PROPERTIES: :CUSTOM_ID: org-babel-result-hide-all :END:

Fold all results in the current buffer.

## org-table-fedit-lisp-indent

Add a note to the current entry.
This is done in the same way as adding a state change note.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-lisp-indent :END:

## org-agenda-set-restriction-lock (&optional type)

Pretty-print and re-indent Lisp expressions in the Formula Editor.

:PROPERTIES: :CUSTOM_ID: org-agenda-set-restriction-lock :END:

## org-agenda-todo-yesterday (&optional arg)

Set restriction lock for agenda, to current subtree or file.
Restriction will be the file if TYPE is ‘file’, or if type is the
universal prefix '(4), or if the cursor is before the first headline
in the file.  Otherwise, restriction will be to the current subtree.

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-yesterday :END:

## org-agenda-date-later (arg &optional what)

Like ‘org-agenda-todo’ but the time of change will be 23:59 of yesterday.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-later :END:

## org-cycle-list-bullet (&optional which)

Change the date of this item to ARG day(s) later.

:PROPERTIES: :CUSTOM_ID: org-cycle-list-bullet :END:

## org-beamer-select-environment

Cycle through the different itemize/enumerate bullets.
This cycle the entire list level through the sequence:

‘-’  ->  ‘+’  ->  ‘*’  ->  ‘1.’  ->  ‘1)’

If WHICH is a valid string, use that as the new bullet.  If WHICH
is an integer, 0 means ‘-’, 1 means ‘+’ etc.  If WHICH is
‘previous’, cycle backwards.

:PROPERTIES: :CUSTOM_ID: org-beamer-select-environment :END:

## org-babel-lilypond-toggle-html-generation

Select the environment to be used by beamer for this entry.
While this uses (for convenience) a tag selection interface, the
result of this command will be that the BEAMER_env *property* of
the entry is set.

In addition to this, the command will also set a tag as a visual
aid, but the tag does not have any semantic meaning.

:PROPERTIES: :CUSTOM_ID: org-babel-lilypond-toggle-html-generation :END:

Toggle whether html will be generated by compilation.

## org-hide-block-toggle (&optional force)

:PROPERTIES: :CUSTOM_ID: org-hide-block-toggle :END:

## orgstruct-mode (&optional arg)

Toggle the visibility of the current block.
When optional argument FORCE is ‘off’, make block visible.  If it
is non-nil, hide it unconditionally.  Throw an error when not at
a block.  Return a non-nil value when toggling is successful.

:PROPERTIES: :CUSTOM_ID: orgstruct-mode :END:

## org-timer-show-remaining-time

Toggle the minor mode ‘orgstruct-mode’.
This mode is for using Org mode structure commands in other
modes.  The following keys behave as if Org mode were active, if
the cursor is on a headline, or on a plain list item (both as
defined by Org mode).

:PROPERTIES: :CUSTOM_ID: org-timer-show-remaining-time :END:

## org-bibtex-import-from-file (file)

Display the remaining time before the timer ends.

:PROPERTIES: :CUSTOM_ID: org-bibtex-import-from-file :END:

## org-toggle-custom-properties-visibility

Read bibtex entries from FILE and insert as Org headlines after point.

:PROPERTIES: :CUSTOM_ID: org-toggle-custom-properties-visibility :END:

## org-overview

Display or hide properties in ‘org-custom-properties’.

:PROPERTIES: :CUSTOM_ID: org-overview :END:

## org-agenda-date-earlier (arg &optional what)

Switch to overview mode, showing only top-level headlines.
This shows all headlines with a level equal or greater than the level
of the first headline in the buffer.  This is important, because if the
first headline is not level one, then (hide-sublevels 1) gives confusing
results.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-earlier :END:

## org-show-entry

Change the date of this item to ARG day(s) earlier.

:PROPERTIES: :CUSTOM_ID: org-show-entry :END:

## org-babel-execute-src-block-maybe

Show the body directly following this heading.
Show the heading too, if it is currently invisible.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-src-block-maybe :END:

## org-beamer-export-as-latex (&optional async subtreep visible-only body-only ext-plist)

Conditionally execute a source block.
Detect if this is context for a Babel src-block and if so
then run ‘org-babel-execute-src-block’.

:PROPERTIES: :CUSTOM_ID: org-beamer-export-as-latex :END:

## orgtbl-send-table (&optional maybe)

Export current buffer as a Beamer buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the ‘org-export-stack’ interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don’t export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org BEAMER Export*", which
will be displayed when ‘org-export-show-temporary-export-buffer’
is non-nil.

:PROPERTIES: :CUSTOM_ID: orgtbl-send-table :END:

## org-toggle-time-stamp-overlays

Send a transformed version of table at point to the receiver position.
With argument MAYBE, fail quietly if no transformation is defined
for this table.

:PROPERTIES: :CUSTOM_ID: org-toggle-time-stamp-overlays :END:

## org-agenda-priority-up

Toggle the use of custom time stamp formats.

:PROPERTIES: :CUSTOM_ID: org-agenda-priority-up :END:

## org-edit-src-code (&optional code edit-buffer-name)

Increase the priority of line at point, also in Org file.

:PROPERTIES: :CUSTOM_ID: org-edit-src-code :END:

Edit the source or example block at point.

The code is copied to a separate buffer and the appropriate mode
is turned on.  When done, exit with ‘C-c '’.  This will remove the
original code in the Org buffer, and replace it with the edited
version.  See ‘org-src-window-setup’ to configure the display of
windows containing the Org buffer and the code buffer.

When optional argument CODE is a string, edit it in a dedicated

When optional argument EDIT-BUFFER-NAME is non-nil, use it as the
name of the sub-editing buffer.

## org-show-children (&optional level)

:PROPERTIES: :CUSTOM_ID: org-show-children :END:

## org-ctrl-c-star

Prefix arg LEVEL is how many levels below the current level
should be shown.  Default is enough to cause the following

:PROPERTIES: :CUSTOM_ID: org-ctrl-c-star :END:

## org-self-insert-command (N)

Compute table, or change heading status of lines.
depending on context.

:PROPERTIES: :CUSTOM_ID: org-self-insert-command :END:

## org-agenda-goto-calendar

Like ‘self-insert-command’, use overwrite-mode for whitespace in tables.
If the cursor is in a table looking at whitespace, the whitespace is
overwritten, and the table is not marked as requiring realignment.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-calendar :END:

## org-backward-element

Open the Emacs calendar with the date at the cursor.

:PROPERTIES: :CUSTOM_ID: org-backward-element :END:

## org-mobile-apply (&optional beg end)

Move backward by one element.
Move to the previous element at the same level, when possible.

:PROPERTIES: :CUSTOM_ID: org-mobile-apply :END:

## org-speed-move-safe (cmd)

Apply all change requests in the current buffer.
If BEG and END are given, only do this in that region.

:PROPERTIES: :CUSTOM_ID: org-speed-move-safe :END:

## org-html-export-as-html (&optional async subtreep visible-only body-only ext-plist)

Execute CMD, but make sure that the cursor always ends up in a headline.

:PROPERTIES: :CUSTOM_ID: org-html-export-as-html :END:

## org-agenda-day-view (&optional day-of-month)

Export current buffer to an HTML buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the ‘org-export-stack’ interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don’t export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "" and "" tags.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org HTML Export*", which
will be displayed when ‘org-export-show-temporary-export-buffer’
is non-nil.

:PROPERTIES: :CUSTOM_ID: org-agenda-day-view :END:

## org-refile (&optional arg default-buffer rfloc msg)

Switch to daily view for agenda.
With argument DAY-OF-MONTH, switch to that day of the month.

:PROPERTIES: :CUSTOM_ID: org-refile :END:

## org-clock-display (&optional arg)

Move the entry or entries at point to another heading.

The list of target headings is compiled using the information in
‘org-refile-targets’, which see.

At the target location, the entry is filed as a subitem of the
target heading.  Depending on ‘org-reverse-note-order’, the new
subitem will either be the first or the last subitem.

If there is an active region, all entries in that region will be
refiled.  However, the region must fulfill the requirement that
the first heading sets the top-level of the moved text.

With a ‘C-u’ ARG, the command will only visit the target location
and not actually move anything.

With a prefix ‘C-u C-u’, go to the location where the last
refiling operation has put the subtree.

With a numeric prefix argument of ‘2’, refile to the running clock.

With a numeric prefix argument of ‘3’, emulate ‘org-refile-keep’
being set to t and copy to the target location, don’t move it.
Beware that keeping refiled entries may result in duplicated ID
properties.

RFLOC can be a refile location obtained in a different way.

MSG is a string to replace "Refile" in the default prompt with
another verb.  E.g. ‘org-copy’ sets this parameter to "Copy".

If you are using target caching (see ‘org-refile-use-cache’), you
have to clear the target cache in order to find new targets.
This can be done with a ‘0’ prefix (‘C-0 C-c C-w’) or a triple
prefix argument (‘C-u C-u C-u C-c C-w’).

:PROPERTIES: :CUSTOM_ID: org-clock-display :END:

## org-return (&optional indent)

Show subtree times in the entire buffer.

By default, show the total time for the range defined in
‘org-clock-display-default-range’.  With ‘C-u’ prefix, show
the total time for today instead.

With ‘C-u C-u’ prefix, use a custom range, entered at prompt.

With ‘C-u C-u C-u’ prefix, display the total time in the
echo area.

Use ‘M-x org-clock-remove-overlays’ to remove the subtree times.

:PROPERTIES: :CUSTOM_ID: org-return :END:

## org-feed-show-raw-feed (feed)

Goto next table row or insert a newline.

Calls ‘org-table-next-row’ or ‘newline’, depending on context.

When optional INDENT argument is non-nil, call

When ‘org-return-follows-link’ is non-nil and point is on
a timestamp or a link, call ‘org-open-at-point’.  However, it
will not happen if point is in a table or on a "dead"
object (e.g., within a comment).  In these case, you need to use
‘org-open-at-point’ directly.

:PROPERTIES: :CUSTOM_ID: org-feed-show-raw-feed :END:

## org-attach-open-in-emacs

Show the raw feed buffer of a feed.

:PROPERTIES: :CUSTOM_ID: org-attach-open-in-emacs :END:

## org-agenda-filter-remove-all

Open attachment, force opening in Emacs.
See ‘org-attach-open’.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-remove-all :END:

## org-babel-expand-src-block (&optional _arg info params)

Remove all filters from the current agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-babel-expand-src-block :END:

## org-ctags-all-tags-in-current-tags-table

Expand the current source code block.
Expand according to the source code block’s header
arguments and pop open the results in a preview buffer.

:PROPERTIES: :CUSTOM_ID: org-ctags-all-tags-in-current-tags-table :END:

## org-table-fedit-ref-right

Read all tags defined in the active TAGS file, into a list of strings.
Return the list.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-right :END:

## org-toggle-latex-fragment (&optional arg)

Shift the reference at point one field to the right.

:PROPERTIES: :CUSTOM_ID: org-toggle-latex-fragment :END:

## org-agenda-filter-by-effort (strip)

Preview the LaTeX fragment at point, or all locally or globally.

If the cursor is on a LaTeX fragment, create the image and overlay
it over the source code, if there is none.  Remove it otherwise.
If there is no fragment at point, display all fragments in the
current section.

With prefix ARG, preview or clear image for all fragments in the
current subtree or in the whole buffer when used before the first
headline.  With a prefix ARG ‘C-u C-u’ preview or clear images
for all fragments in the buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-effort :END:

## org-emphasize (&optional char)

Filter agenda entries by effort.
With no prefix argument, keep entries matching the effort condition.
With one prefix argument, filter out entries matching the condition.
With two prefix arguments, remove the effort filters.

:PROPERTIES: :CUSTOM_ID: org-emphasize :END:

## org-columns-edit-value (&optional key)

Insert or change an emphasis, i.e. a font like bold or italic.
If there is an active region, change that region to a new emphasis.
If there is no region, just insert the marker characters and position
the cursor between them.
CHAR should be the marker character.  If it is a space, it means to
remove the emphasis of the selected region.
If CHAR is not given (for example in an interactive call) it will be
prompted for.

:PROPERTIES: :CUSTOM_ID: org-columns-edit-value :END:

## org-kill-line (&optional _arg)

Edit the value of the property at point in column view.
Where possible, use the standard interface for changing this line.

:PROPERTIES: :CUSTOM_ID: org-kill-line :END:

## org-capture-kill

Kill line, to tags or end of line.

:PROPERTIES: :CUSTOM_ID: org-capture-kill :END:

## org-drag-line-forward (arg)

Abort the current capture process.

:PROPERTIES: :CUSTOM_ID: org-drag-line-forward :END:

## org-mobile-pull

Drag the line at point ARG lines forward.

:PROPERTIES: :CUSTOM_ID: org-mobile-pull :END:

## org-agenda-set-property

Pull the contents of ‘org-mobile-capture-file’ and integrate them.
Apply all flagged actions, flag entries to be flagged and then call an
agenda view showing the flagged items.

:PROPERTIES: :CUSTOM_ID: org-agenda-set-property :END:

## org-table-move-column-right

Set a property for the current headline.

:PROPERTIES: :CUSTOM_ID: org-table-move-column-right :END:

## org-agenda-redo-all (&optional exhaustive)

Move column to the right.

:PROPERTIES: :CUSTOM_ID: org-agenda-redo-all :END:

## org-toggle-checkbox (&optional toggle-presence)

Rebuild all agenda views in the current buffer.
With a prefix argument, do so in all agenda buffers.

:PROPERTIES: :CUSTOM_ID: org-toggle-checkbox :END:

## org-mobile-push

Toggle the checkbox in the current line.
With prefix arg TOGGLE-PRESENCE, add or remove checkboxes.  With
double prefix, set checkbox to [-].

When there is an active region, toggle status or presence of the
first checkbox there, and make every item inside have the same
status or presence, respectively.

If the cursor is in a headline, apply this to all checkbox items
in the text below the heading, taking as reference the first item
in subtree, ignoring drawers.

:PROPERTIES: :CUSTOM_ID: org-mobile-push :END:

## org-mark-subtree (&optional up)

Push the current state of Org affairs to the target directory.
This will create the index file, copy all agenda files there, and also
create all custom agenda views, for upload to the mobile phone.

:PROPERTIES: :CUSTOM_ID: org-mark-subtree :END:

## org-publish-all (&optional force async)

Mark the current subtree.
This puts point at the start of the current subtree, and mark at
the end.  If a numeric prefix UP is given, move up into the
hierarchy of headlines by UP levels before marking the subtree.

:PROPERTIES: :CUSTOM_ID: org-publish-all :END:

## org-set-property-and-value (use-last)

Publish all projects.
With prefix argument FORCE, remove all files in the timestamp
directory and force publishing all projects.  With a non-nil
optional argument ASYNC, publishing will be done asynchronously,
in another process.

:PROPERTIES: :CUSTOM_ID: org-set-property-and-value :END:

## org-timer-pause-or-continue (&optional stop)

Allow to set [PROPERTY]: [value] direction from prompt.
When use-default, don’t even ask, just use the last
"[PROPERTY]: [value]" string from the history.

:PROPERTIES: :CUSTOM_ID: org-timer-pause-or-continue :END:

## org-mode

Pause or continue the relative or countdown timer.
With prefix arg STOP, stop it entirely.

:PROPERTIES: :CUSTOM_ID: org-mode :END:

## org-babel-lilypond-tangle

Outline-based notes management and organizer, alias
"Carsten’s outline-mode for keeping track of everything."

Org mode develops organizational tasks around a NOTES file which
contains information about projects as plain text.  Org mode is
implemented on top of Outline mode, which is ideal to keep the content
of large files well structured.  It supports ToDo items, deadlines and
time stamps, which magically appear in the diary listing of the Emacs
calendar.  Tables are easily created with a built-in table editor.
Plain text URL-like links connect to websites, emails (VM), Usenet
messages (Gnus), BBDB entries, and any files related to the project.
For printing and sharing of notes, an Org file (or a part of it)
can be exported as a structured ASCII or HTML file.

The following commands are available:

key             binding
---             -------

C-a		org-beginning-of-line
C-c		Prefix Command
C-e		org-end-of-line
TAB		org-cycle
C-j		org-return-indent
C-k		org-kill-line
RET		org-return
C-y		org-yank
ESC		Prefix Command
|		org-force-self-insert
C-#		org-table-rotate-recalc-marks
C-'		org-cycle-agenda-files
C-,		org-cycle-agenda-files
org-decrease-number-at-point
org-increase-number-at-point
org-shiftcontroldown
org-shiftcontrolleft
org-shiftcontrolright
org-shiftcontrolup
org-force-cycle-archived
org-shiftmetaleft
org-shiftmetaright
org-shiftmetaup
org-metaleft
org-meta-return
org-metaright
org-metaup
org-shiftdown
org-shifttab
org-shiftleft
org-table-copy-down
org-shiftright
org-shifttab
org-shiftup
org-shifttab
org-mouse-down-mouse
Prefix Command
org-cycle

C-M-i		pcomplete
C-M-t		org-transpose-element
M-^		org-delete-indentation
M-a		org-backward-sentence
M-e		org-forward-sentence
M-h		org-mark-element
M-{		org-backward-element
M-}		org-forward-element

C-c C-a		org-attach
C-c C-c		org-ctrl-c-ctrl-c
C-c C-e		org-export-dispatch
C-c C-j		org-goto
C-c C-k		org-kill-note-or-show-branches
C-c RET		org-ctrl-c-ret
C-c C-o		org-open-at-point
C-c C-q		org-set-tags-command
C-c C-r		org-reveal
C-c C-s		org-schedule
C-c C-t		org-todo
C-c C-v		Prefix Command
C-c C-w		org-refile
C-c C-x		Prefix Command
C-c C-y		org-evaluate-time-range
C-c ESC		Prefix Command
C-c C-^		org-up-element
C-c C-_		org-down-element
C-c SPC		org-table-blank-field
C-c !		org-time-stamp-inactive
C-c "		Prefix Command
C-c org-archive-subtree C-c % org-mark-ring-push C-c & org-mark-ring-goto C-c ' org-edit-special C-c * org-ctrl-c-star C-c + org-table-sum C-c , org-priority C-c - org-ctrl-c-minus C-c . org-time-stamp C-c / org-sparse-tree C-c : org-toggle-fixed-width C-c ; org-toggle-comment C-c < org-date-from-calendar C-c = org-table-eval-formula C-c > org-goto-calendar C-c ? org-table-field-info C-c @ org-mark-subtree C-c [ org-agenda-file-to-front C-c \ org-match-sparse-tree C-c ] org-remove-file C-c ^ org-sort C-c  org-table-edit-field C-c { org-table-toggle-formula-debugger C-c | org-table-create-or-convert-from-region C-c } org-table-toggle-coordinate-overlays C-c ~ org-table-create-with-table.el C-c C-* org-list-make-subtree org-backward-paragraph org-comment-dwim org-delete-backward-char org-delete-char org-fill-paragraph org-forward-paragraph org-open-line org-backward-heading-same-level org-demote-subtree org-forward-heading-same-level org-ctrl-c-ret org-mark-subtree org-next-visible-heading org-previous-visible-heading org-promote-subtree org-kill-note-or-show-branches org-show-subtree org-self-insert-command org-show-children org-transpose-words C-c C-a outline-show-all (that binding is currently shadowed by another mode) C-c C-b outline-backward-same-level (that binding is currently shadowed by another mode) C-c C-c outline-hide-entry (that binding is currently shadowed by another mode) C-c C-d outline-hide-subtree (that binding is currently shadowed by another mode) C-c C-e outline-show-entry (that binding is currently shadowed by another mode) C-c C-f outline-forward-same-level (that binding is currently shadowed by another mode) C-c TAB outline-show-children C-c C-k outline-show-branches (that binding is currently shadowed by another mode) C-c C-l outline-hide-leaves (that binding is currently shadowed by another mode) C-c RET outline-insert-heading (that binding is currently shadowed by another mode) C-c C-n outline-next-visible-heading C-c C-o outline-hide-other (that binding is currently shadowed by another mode) C-c C-p outline-previous-visible-heading C-c C-q outline-hide-sublevels (that binding is currently shadowed by another mode) C-c C-s outline-show-subtree (that binding is currently shadowed by another mode) C-c C-t outline-hide-body (that binding is currently shadowed by another mode) C-c C-u outline-up-heading C-c C-v outline-move-subtree-down (that binding is currently shadowed by another mode) C-c C-^ outline-move-subtree-up (that binding is currently shadowed by another mode) C-c @ outline-mark-subtree (that binding is currently shadowed by another mode) C-c C-< outline-promote C-c C-> outline-demote C-M-i ispell-complete-word (that binding is currently shadowed by another mode) C-c " a orgtbl-ascii-plot C-c " g org-plot/gnuplot C-c C-M-l org-insert-all-links C-c M-b org-previous-block C-c M-f org-next-block C-c M-l org-insert-last-stored-link C-c M-w org-copy C-c C-v C-a org-babel-sha1-hash C-c C-v C-b org-babel-execute-buffer C-c C-v C-c org-babel-check-src-block C-c C-v C-d org-babel-demarcate-block C-c C-v C-e org-babel-execute-maybe C-c C-v C-f org-babel-tangle-file C-c C-v TAB org-babel-view-src-block-info C-c C-v C-j org-babel-insert-header-arg C-c C-v C-l org-babel-load-in-session C-c C-v C-n org-babel-next-src-block C-c C-v C-o org-babel-open-src-block-result C-c C-v C-p org-babel-previous-src-block C-c C-v C-r org-babel-goto-named-result C-c C-v C-s org-babel-execute-subtree C-c C-v C-t org-babel-tangle C-c C-v C-u org-babel-goto-src-block-head C-c C-v C-v org-babel-expand-src-block C-c C-v C-x org-babel-do-key-sequence-in-edit-buffer C-c C-v C-z org-babel-switch-to-session C-c C-v ESC Prefix Command C-c C-v I org-babel-view-src-block-info C-c C-v a org-babel-sha1-hash C-c C-v b org-babel-execute-buffer C-c C-v c org-babel-check-src-block C-c C-v d org-babel-demarcate-block C-c C-v e org-babel-execute-maybe C-c C-v f org-babel-tangle-file C-c C-v g org-babel-goto-named-src-block C-c C-v h org-babel-describe-bindings C-c C-v i org-babel-lob-ingest C-c C-v j org-babel-insert-header-arg C-c C-v k org-babel-remove-result-one-or-many C-c C-v l org-babel-load-in-session C-c C-v n org-babel-next-src-block C-c C-v o org-babel-open-src-block-result C-c C-v p org-babel-previous-src-block C-c C-v r org-babel-goto-named-result C-c C-v s org-babel-execute-subtree C-c C-v t org-babel-tangle C-c C-v u org-babel-goto-src-block-head C-c C-v v org-babel-expand-src-block C-c C-v x org-babel-do-key-sequence-in-edit-buffer C-c C-v z org-babel-switch-to-session-with-code C-c C-x C-a org-archive-subtree-default C-c C-x C-b org-toggle-checkbox C-c C-x C-c org-columns C-c C-x C-d org-clock-display C-c C-x C-f org-emphasize C-c C-x TAB org-clock-in C-c C-x C-j org-clock-goto C-c C-x C-l org-toggle-latex-fragment C-c C-x RET Prefix Command C-c C-x C-n org-next-link C-c C-x C-o org-clock-out C-c C-x C-p org-previous-link C-c C-x C-q org-clock-cancel C-c C-x C-r org-clock-report C-c C-x C-s org-archive-subtree C-c C-x C-t org-toggle-time-stamp-overlays C-c C-x C-u org-dblock-update C-c C-x C-v org-toggle-inline-images C-c C-x C-w org-cut-special C-c C-x C-x org-clock-in-last C-c C-x C-y org-paste-special C-c C-x C-z org-resolve-clocks C-c C-x ESC Prefix Command C-c C-x ! org-reload C-c C-x , org-timer-pause-or-continue C-c C-x - org-timer-item C-c C-x . org-timer C-c C-x 0 org-timer-start C-c C-x ; org-timer-set-timer C-c C-x < org-agenda-set-restriction-lock C-c C-x > org-agenda-remove-restriction-lock C-c C-x A org-archive-to-archive-sibling C-c C-x E org-inc-effort C-c C-x G org-feed-goto-inbox C-c C-x P org-set-property-and-value C-c C-x [ org-reftex-citation C-c C-x \ org-toggle-pretty-entities C-c C-x _ org-timer-stop C-c C-x a org-toggle-archive-tag C-c C-x b org-tree-to-indirect-buffer C-c C-x c org-clone-subtree-with-time-shift C-c C-x d org-insert-drawer C-c C-x e org-set-effort C-c C-x f org-footnote-action C-c C-x g org-feed-update-all C-c C-x i org-columns-insert-dblock C-c C-x o org-toggle-ordered-property C-c C-x p org-set-property C-c C-x q org-toggle-tags-groups C-c C-x v org-copy-visible C-c C-v C-M-h org-babel-mark-block C-c C-x C-M-v org-redisplay-inline-images C-c C-x M-w org-copy-special C-c C-x RET g org-mobile-pull C-c C-x RET p org-mobile-push In addition to any hooks its parent mode ‘outline-mode’ might have run, this mode runs the hook ‘org-mode-hook’, as the final or penultimate step during initialization. :PROPERTIES: :CUSTOM_ID: org-babel-lilypond-tangle :END: ## org-goto-local-auto-isearch ob-lilypond specific tangle, attempts to invoke =ly-execute-tangled-ly= if tangle is successful. Also passes specific arguments to =org-babel-tangle= :PROPERTIES: :CUSTOM_ID: org-goto-local-auto-isearch :END: ## org-backward-sentence (&optional _arg) Start isearch. :PROPERTIES: :CUSTOM_ID: org-backward-sentence :END: ## org-beamer-export-to-pdf (&optional async subtreep visible-only body-only ext-plist) Go to beginning of sentence, or beginning of table field. This will call ‘backward-sentence’ or ‘org-table-beginning-of-field’, depending on context. :PROPERTIES: :CUSTOM_ID: org-beamer-export-to-pdf :END: ## org-store-agenda-views (&rest parameters) Export current buffer as a Beamer presentation (PDF). If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{document}" and "\end{document}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return PDF file’s name. :PROPERTIES: :CUSTOM_ID: org-store-agenda-views :END: ## org-babel-load-file (file &optional compile) Store agenda views. :PROPERTIES: :CUSTOM_ID: org-babel-load-file :END: ## org-columns (&optional global columns-fmt-string) Load Emacs Lisp source code blocks in the Org FILE. This function exports the source code using ‘org-babel-tangle’ and then loads the resulting file using ‘load-file’. With prefix arg (noninteractively: 2nd arg) COMPILE the tangled Emacs Lisp file to byte-code before it is loaded. :PROPERTIES: :CUSTOM_ID: org-columns :END: ## org-check-before-date (d) Turn on column view on an Org mode file. Column view applies to the whole buffer if point is before the first headline. Otherwise, it applies to the first ancestor setting "COLUMNS" property. If there is none, it defaults to the current headline. With a ‘C-u’ prefix argument, turn on column view for the whole buffer unconditionally. When COLUMNS-FMT-STRING is non-nil, use it as the column format. :PROPERTIES: :CUSTOM_ID: org-check-before-date :END: ## org-agenda-drag-line-backward (arg) Check if there are deadlines or scheduled entries before date D. :PROPERTIES: :CUSTOM_ID: org-agenda-drag-line-backward :END: ## org-yank (&optional arg) Drag an agenda line backward by ARG lines. :PROPERTIES: :CUSTOM_ID: org-yank :END: ## org-agenda-toggle-time-grid Yank. If the kill is a subtree, treat it specially. This command will look at the current kill and check if is a single subtree, or a series of subtrees[1]. If it passes the test, and if the cursor is at the beginning of a line or after the stars of a currently empty headline, then the yank is handled specially. How exactly depends on the value of the following variables. ‘org-yank-folded-subtrees’ By default, this variable is non-nil, which results in subtree(s) being folded after insertion, except if doing so would swallow text after the yanked text. ‘org-yank-adjusted-subtrees’ When non-nil (the default value is nil), the subtree will be promoted or demoted in order to fit into the local outline tree structure, which means that the level will be adjusted so that it becomes the smaller one of the two *visible* surrounding headings. Any prefix to this command will cause ‘yank’ to be called directly with no special treatment. In particular, a simple ‘C-u’ prefix will just plainly yank the text as it is. [1] The test checks if the first non-white line is a heading and if there are no other headings with fewer stars. :PROPERTIES: :CUSTOM_ID: org-agenda-toggle-time-grid :END: ## org-agenda-todo-previousset Toggle time grid in an agenda buffer. :PROPERTIES: :CUSTOM_ID: org-agenda-todo-previousset :END: ## org-agenda-priority-down Switch TODO entry to previous sequence. :PROPERTIES: :CUSTOM_ID: org-agenda-priority-down :END: Decrease the priority of line at point, also in Org file. :PROPERTIES: :CUSTOM_ID: org-insert-link :END: ## org-display-outline-path (&optional file current separator just-return-string) Insert a link. At the prompt, enter the link. Completion can be used to insert any of the link protocol prefixes in use. The history can be used to select a link previously stored with ‘org-store-link’. When the empty string is entered (i.e. if you just press ‘RET’ at the prompt), the link defaults to the most recently stored link. As ‘SPC’ triggers completion in the minibuffer, you need to use ‘M-SPC’ or ‘C-q SPC’ to force the insertion of a space character. You will also be prompted for a description, and if one is given, it will be displayed in the buffer instead of the link. If there is already a link at point, this command will allow you to edit link and description parts. With a ‘C-u’ prefix, prompts for a file to link to. The file name can be selected using completion. The path to the file will be relative to the current directory if the file is in the current directory or a subdirectory. Otherwise, the link will be the absolute path as completed in the minibuffer (i.e. normally ~/path/to/file). You can configure this behavior using the option ‘org-link-file-path-type’. With a ‘C-u C-u’ prefix, enforce an absolute path even if the file is in the current directory or below. A ‘C-u C-u C-u’ prefix negates ‘org-keep-stored-link-after-insertion’. If ‘org-make-link-description-function’ is non-nil, this function will be called with the link target, and the result will be the default link description. If the LINK-LOCATION parameter is non-nil, this value will be used as the link location instead of reading one interactively. If the DEFAULT-DESCRIPTION parameter is non-nil, this value will be used as the default description. :PROPERTIES: :CUSTOM_ID: org-display-outline-path :END: ## org-timer-change-times-in-region (beg end delta) Display the current outline path in the echo area. If FILE is non-nil, prepend the output with the file name. If CURRENT is non-nil, append the current heading to the output. SEPARATOR is passed through to ‘org-format-outline-path’. It separates the different parts of the path and defaults to "/". If JUST-RETURN-STRING is non-nil, return a string, don’t display a message. :PROPERTIES: :CUSTOM_ID: org-timer-change-times-in-region :END: ## org-indent-block Change all h:mm:ss time in region by a DELTA. :PROPERTIES: :CUSTOM_ID: org-indent-block :END: ## org-latex-export-to-pdf (&optional async subtreep visible-only body-only ext-plist) Indent the block at point. :PROPERTIES: :CUSTOM_ID: org-latex-export-to-pdf :END: ## org-timestamp-up-day (&optional arg) Export current buffer to LaTeX then process through to PDF. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{document}" and "\end{document}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return PDF file’s name. :PROPERTIES: :CUSTOM_ID: org-timestamp-up-day :END: ## org-copy-special Increase the date in the time stamp by one day. With prefix ARG, change that many days. :PROPERTIES: :CUSTOM_ID: org-copy-special :END: ## org-paste-subtree (&optional level tree for-yank remove) Copy region in table or copy current subtree. Calls ‘org-table-copy-region’ or ‘org-copy-subtree’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-paste-subtree :END: ## org-agenda-holidays Paste the clipboard as a subtree, with modification of headline level. The entire subtree is promoted or demoted in order to match a new headline level. If the cursor is at the beginning of a headline, the same level as that headline is used to paste the tree. If not, the new level is derived from the *visible* headings before and after the insertion point, and taken to be the inferior headline level of the two. So if the previous visible heading is level 3 and the next is level 4 (or vice versa), level 4 will be used for insertion. This makes sure that the subtree remains an independent subtree and does not swallow low level entries. You can also force a different level, either by using a numeric prefix argument, or by inserting the heading marker by hand. For example, if the cursor is after "*****", then the tree will be shifted to level 5. If optional TREE is given, use this text instead of the kill ring. When FOR-YANK is set, this is called by ‘org-yank’. In this case, do not move back over whitespace before inserting, and move point to the end of the inserted text when done. When REMOVE is non-nil, remove the subtree from the clipboard. :PROPERTIES: :CUSTOM_ID: org-agenda-holidays :END: ## org-version (&optional here full message) Display the holidays for the 3 months around the cursor date. :PROPERTIES: :CUSTOM_ID: org-version :END: ## org-hide-block-toggle-maybe Show the Org version. Interactively, or when MESSAGE is non-nil, show it in echo area. With prefix argument, or when HERE is non-nil, insert it at point. In non-interactive uses, a reduced version string is output unless FULL is given. :PROPERTIES: :CUSTOM_ID: org-hide-block-toggle-maybe :END: ## org-publish-current-file (&optional force async) Toggle visibility of block at point. Unlike to ‘org-hide-block-toggle’, this function does not throw an error. Return a non-nil value when toggling is successful. :PROPERTIES: :CUSTOM_ID: org-publish-current-file :END: Publish the current file. With prefix argument FORCE, force publish the file. When optional argument ASYNC is non-nil, publishing will be done asynchronously, in another process. :PROPERTIES: :CUSTOM_ID: org-next-link :END: ## org-clock-goto (&optional select) Move forward to the next link. If the link is in hidden text, expose it. :PROPERTIES: :CUSTOM_ID: org-clock-goto :END: ## org-babel-do-key-sequence-in-edit-buffer (key) Go to the currently clocked-in entry, or to the most recently clocked one. With prefix arg SELECT, offer recently clocked tasks for selection. :PROPERTIES: :CUSTOM_ID: org-babel-do-key-sequence-in-edit-buffer :END: ## org-hide-block-all Read key sequence and execute the command in edit buffer. Enter a key sequence to be executed in the language major-mode edit buffer. For example, TAB will alter the contents of the Org code block according to the effect of TAB in the language major mode buffer. For languages that support interactive sessions, this can be used to send code from the Org buffer to the session for evaluation using the native major mode evaluation mechanisms. :PROPERTIES: :CUSTOM_ID: org-hide-block-all :END: ## org-promote-subtree Fold all blocks in the current buffer. :PROPERTIES: :CUSTOM_ID: org-promote-subtree :END: ## org-babel-execute-maybe Promote the entire subtree. See also ‘org-promote’. :PROPERTIES: :CUSTOM_ID: org-babel-execute-maybe :END: ## org-clock-in (&optional select start-time) :PROPERTIES: :CUSTOM_ID: org-clock-in :END: ## org-do-promote Start the clock on the current item. If necessary, clock-out of the currently active clock. With a ‘C-u’ prefix argument SELECT, offer a list of recently clocked tasks to clock into. When SELECT is ‘C-u C-u’, clock into the current task and mark it as the default task, a special task that will always be offered in the clocking selection, associated with the letter ‘d’. When SELECT is ‘C-u C-u C-u’, clock in by using the last clock-out time as the start time. See ‘org-clock-continuously’ to make this the default behavior. :PROPERTIES: :CUSTOM_ID: org-do-promote :END: ## org-agenda-drag-line-forward (arg &optional backward) Promote the current heading higher up the tree. If the region is active in ‘transient-mark-mode’, promote all headings in the region. :PROPERTIES: :CUSTOM_ID: org-agenda-drag-line-forward :END: ## org-inc-effort Drag an agenda line forward by ARG lines. When the optional argument ‘backward’ is non-nil, move backward. :PROPERTIES: :CUSTOM_ID: org-inc-effort :END: ## org-indent-to-column (column &optional minimum) Increment the value of the effort property in the current entry. :PROPERTIES: :CUSTOM_ID: org-indent-to-column :END: ## org-agenda-kill Indent from point with tabs and spaces until COLUMN is reached. Optional second argument MINIMUM says always do at least MINIMUM spaces even if that goes past COLUMN; by default, MINIMUM is zero. The return value is COLUMN. (fn COLUMN &optional MINIMUM) :PROPERTIES: :CUSTOM_ID: org-agenda-kill :END: ## org-protocol-create (&optional project-plist) Kill the entry or subtree belonging to the current agenda entry. :PROPERTIES: :CUSTOM_ID: org-protocol-create :END: ## org-odt-export-as-odf (latex-frag &optional odf-file) Create a new org-protocol project interactively. An org-protocol project is an entry in ‘org-protocol-project-alist’ which is used by ‘org-protocol-open-source’. Optionally use PROJECT-PLIST to initialize the defaults for this project. If PROJECT-PLIST is the cdr of an element in ‘org-publish-project-alist’, reuse :base-directory, :html-extension and :base-extension. :PROPERTIES: :CUSTOM_ID: org-odt-export-as-odf :END: ## org-footnote-new Export LATEX-FRAG as OpenDocument formula file ODF-FILE. Use ‘org-create-math-formula’ to convert LATEX-FRAG first to MathML. When invoked as an interactive command, use ‘org-latex-regexps’ to infer LATEX-FRAG from currently active region. If no LaTeX fragments are found, prompt for it. Push MathML source to kill ring depending on the value of ‘org-export-copy-to-kill-ring’. :PROPERTIES: :CUSTOM_ID: org-footnote-new :END: ## org-edit-src-save Insert a new footnote. This command prompts for a label. If this is a label referencing an existing label, only insert the label. If the footnote label is empty or new, let the user edit the definition of the footnote. :PROPERTIES: :CUSTOM_ID: org-edit-src-save :END: ## org-inlinetask-insert-task (&optional no-state) Save parent buffer with current state source-code buffer. :PROPERTIES: :CUSTOM_ID: org-inlinetask-insert-task :END: ## org-lint--ignore-checker Insert an inline task. If prefix arg NO-STATE is set, ignore ‘org-inlinetask-default-state’. :PROPERTIES: :CUSTOM_ID: org-lint--ignore-checker :END: ## org-table-import (file arg) Ignore all reports from checker that generated the report at point. Checker will also be ignored in all subsequent reports. :PROPERTIES: :CUSTOM_ID: org-table-import :END: ## org-babel-next-src-block (&optional arg) Import FILE as a table. The file is assumed to be tab-separated. Such files can be produced by most spreadsheet and database applications. If no tabs (at least one per line) are found, lines will be split on whitespace into fields. :PROPERTIES: :CUSTOM_ID: org-babel-next-src-block :END: ## org-submit-bug-report Jump to the next source block. With optional prefix argument ARG, jump forward ARG many source blocks. :PROPERTIES: :CUSTOM_ID: org-submit-bug-report :END: ## org-agenda-convert-date Submit a bug report on Org via mail. Don’t hesitate to report any problems or inaccurate documentation. If you don’t have setup sending mail from (X)Emacs, please copy the output buffer into your mail program, as it gives us important information about your Org version and configuration. :PROPERTIES: :CUSTOM_ID: org-agenda-convert-date :END: ## org-shiftmetaup (&optional _arg) :PROPERTIES: :CUSTOM_ID: org-shiftmetaup :END: ## org-babel-hash-at-point (&optional point) Drag the line at point up. In a table, kill the current row. On a clock timestamp, update the value of the timestamp like ‘S-’ but also adjust the previous clocked item in the clock history. Everywhere else, drag the line at point up. :PROPERTIES: :CUSTOM_ID: org-babel-hash-at-point :END: ## org-footnote-renumber-fn:N Return the value of the hash at POINT. The hash is also added as the last element of the kill ring. This can be called with ‘C-c C-c’. :PROPERTIES: :CUSTOM_ID: org-footnote-renumber-fn:N :END: ## org-babel-pop-to-session-maybe Order numbered footnotes into a sequence in the document. :PROPERTIES: :CUSTOM_ID: org-babel-pop-to-session-maybe :END: ## org-agenda-goto (&optional highlight) Conditionally pop to a session. Detect if this is context for a org-babel src-block and if so then run ‘org-babel-switch-to-session’. :PROPERTIES: :CUSTOM_ID: org-agenda-goto :END: ## org-mouse-show-overview Go to the entry at point in the corresponding Org file. :PROPERTIES: :CUSTOM_ID: org-mouse-show-overview :END: ## org-agenda-switch-to (&optional delete-other-windows) Change visibility of current org buffer to first-level headlines only. :PROPERTIES: :CUSTOM_ID: org-agenda-switch-to :END: ## org-babel-goto-named-src-block (name) Go to the Org mode file which contains the item at point. When optional argument DELETE-OTHER-WINDOWS is non-nil, the displayed Org file fills the frame. :PROPERTIES: :CUSTOM_ID: org-babel-goto-named-src-block :END: ## org-org-export-as-org (&optional async subtreep visible-only body-only ext-plist) Go to a named source-code block. :PROPERTIES: :CUSTOM_ID: org-org-export-as-org :END: ## org-export-stack-remove (&optional source) Export current buffer to an Org buffer. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting buffer should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, strip document keywords from output. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Export is done in a buffer named "*Org ORG Export*", which will be displayed when ‘org-export-show-temporary-export-buffer’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-export-stack-remove :END: ## org-table-fedit-ref-left Remove export results at point from stack. If optional argument SOURCE is non-nil, remove it instead. :PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-left :END: ## org-timer-start (&optional offset) Shift the reference at point one field to the left. :PROPERTIES: :CUSTOM_ID: org-timer-start :END: ## org-agenda-todo-nextset Set the starting time for the relative timer to now. When called with prefix argument OFFSET, prompt the user for an offset time, with the default taken from a timer stamp at point, if any. If OFFSET is a string or an integer, it is directly taken to be the offset without user interaction. When called with a double prefix arg, all timer strings in the active region will be shifted by a specific amount. You will be prompted for the amount, with the default to make the first timer string in the region 0:00:00. :PROPERTIES: :CUSTOM_ID: org-agenda-todo-nextset :END: ## org-edit-fixed-width-region Switch TODO entry to next sequence. :PROPERTIES: :CUSTOM_ID: org-edit-fixed-width-region :END: ## org-dblock-update (&optional arg) Edit the fixed-width ASCII drawing at point. This must be a region where each line starts with a colon followed by a space or a newline character. A new buffer is created and the fixed-width region is copied into it, and the buffer is switched into the major mode defined in ‘org-edit-fixed-width-region-mode’, which see. When done, exit with ‘C-c '’. The edited text will then replace the area in the Org mode buffer. :PROPERTIES: :CUSTOM_ID: org-dblock-update :END: ## org-capture-string (string &optional keys) User command for updating dynamic blocks. Update the dynamic block at point. With prefix ARG, update all dynamic blocks in the buffer. :PROPERTIES: :CUSTOM_ID: org-capture-string :END: ## org-clock-select-task (&optional prompt) Capture STRING with the template selected by KEYS. :PROPERTIES: :CUSTOM_ID: org-clock-select-task :END: ## org-rss-export-as-rss (&optional async subtreep visible-only) Select a task that was recently associated with clocking. :PROPERTIES: :CUSTOM_ID: org-rss-export-as-rss :END: ## org-babel-initiate-session (&optional arg info) Export current buffer to a RSS buffer. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting buffer should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. Export is done in a buffer named "*Org RSS Export*", which will be displayed when ‘org-export-show-temporary-export-buffer’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-babel-initiate-session :END: ## org-table-calc-current-TBLFM (&optional arg) Initiate session for current code block. If called with a prefix argument then resolve any variable references in the header arguments and assign these variables in the session. Copy the body of the code block to the kill ring. :PROPERTIES: :CUSTOM_ID: org-table-calc-current-TBLFM :END: ## org-table-fedit-ref-down Apply the #+TBLFM in the line at point to the table. :PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-down :END: ## org-clock-modify-effort-estimate (&optional value) Shift the reference at point one row/hline down. :PROPERTIES: :CUSTOM_ID: org-clock-modify-effort-estimate :END: ## org-agenda-next-line Add to or set the effort estimate of the item currently being clocked. VALUE can be a number of minutes, or a string with format hh:mm or mm. When the string starts with a + or a - sign, the current value of the effort property will be changed by that amount. If the effort value is expressed as an ‘org-effort-durations’ (e.g. "3h"), the modified value will be converted to a hh:mm duration. This command will update the "Effort" property of the currently clocked item, and the value displayed in the mode line. :PROPERTIES: :CUSTOM_ID: org-agenda-next-line :END: ## org-previous-item Move cursor to the next line, and show if follow mode is active. :PROPERTIES: :CUSTOM_ID: org-previous-item :END: ## org-ascii-export-as-ascii (&optional async subtreep visible-only body-only ext-plist) Move to the beginning of the previous item. Throw an error when not in a list. Also throw an error when at first item, unless ‘org-list-use-circular-motion’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-ascii-export-as-ascii :END: ## org-redisplay-inline-images Export current buffer to a text buffer. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting buffer should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, strip title and table of contents from output. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Export is done in a buffer named "*Org ASCII Export*", which will be displayed when ‘org-export-show-temporary-export-buffer’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-redisplay-inline-images :END: ## org-agenda-toggle-archive-tag Refresh the display of inline images. :PROPERTIES: :CUSTOM_ID: org-agenda-toggle-archive-tag :END: ## org-agenda-capture (&optional with-time) Toggle the archive tag for the current entry. :PROPERTIES: :CUSTOM_ID: org-agenda-capture :END: ## org-datetree-cleanup Call ‘org-capture’ with the date at point. With a ‘C-1’ prefix, use the HH:MM value at point (if any) or the current HH:MM time. :PROPERTIES: :CUSTOM_ID: org-datetree-cleanup :END: ## org-agenda-date-earlier-hours (arg) Make sure all entries in the current tree are under the correct date. It may be useful to restrict the buffer to the applicable portion before running this command, even though the command tries to be smart. :PROPERTIES: :CUSTOM_ID: org-agenda-date-earlier-hours :END: ## org-agenda-date-later-minutes (arg) Change the time of this item, in hour steps. :PROPERTIES: :CUSTOM_ID: org-agenda-date-later-minutes :END: ## org-table-rotate-recalc-marks (&optional newchar) Change the time of this item, in units of ‘org-time-stamp-rounding-minutes’. :PROPERTIES: :CUSTOM_ID: org-table-rotate-recalc-marks :END: ## org-drag-element-backward Rotate the recalculation mark in the first column. If in any row, the first field is not consistent with a mark, insert a new column for the markers. When there is an active region, change all the lines in the region, after prompting for the marking character. After each change, a message will be displayed indicating the meaning of the new mark. :PROPERTIES: :CUSTOM_ID: org-drag-element-backward :END: ## org-transpose-words Move backward element at point. :PROPERTIES: :CUSTOM_ID: org-transpose-words :END: ## org-next-block (arg &optional backward block-regexp) Transpose words for Org. This uses the ‘org-mode-transpose-word-syntax-table’ syntax table, which interprets characters in ‘org-emphasis-alist’ as word constituents. :PROPERTIES: :CUSTOM_ID: org-next-block :END: ## org-indent-indent-buffer Jump to the next block. With a prefix argument ARG, jump forward ARG many blocks. When BACKWARD is non-nil, jump to the previous block. When BLOCK-REGEXP is non-nil, use this regexp to find blocks. Match data is set according to this regexp when the function returns. Return point at beginning of the opening line of found block. Throw an error if no block is found. :PROPERTIES: :CUSTOM_ID: org-indent-indent-buffer :END: ## org-babel-execute-src-block (&optional arg info params) Add indentation properties to the accessible part of the buffer. :PROPERTIES: :CUSTOM_ID: org-babel-execute-src-block :END: ## org-find-entry-with-id (ident) Execute the current source code block. Insert the results of execution into the buffer. Source code execution and the collection and formatting of results can be controlled through a variety of header arguments. With prefix argument ARG, force re-execution even if an existing result cached in the buffer would otherwise have been returned. Optionally supply a value for INFO in the form returned by ‘org-babel-get-src-block-info’. Optionally supply a value for PARAMS which will be merged with the header arguments specified at the front of the source code block. :PROPERTIES: :CUSTOM_ID: org-find-entry-with-id :END: ## org-table-next-field Locate the entry that contains the ID property with exact value IDENT. IDENT can be a string, a symbol or a number, this function will search for the string representation of it. Return the position where this entry starts, or nil if there is no such entry. :PROPERTIES: :CUSTOM_ID: org-table-next-field :END: ## org-table-copy-down (n) Go to the next field in the current table, creating new lines as needed. Before doing so, re-align the table if necessary. :PROPERTIES: :CUSTOM_ID: org-table-copy-down :END: ## org-agenda-cycle-show (&optional n) Copy the value of the current field one row below. If the field at the cursor is empty, copy the content of the nearest non-empty field above. With argument N, use the Nth non-empty field. If the current field is not empty, it is copied down to the next row, and the cursor is moved with it. Therefore, repeating this command causes the column to be filled row-by-row. If the variable ‘org-table-copy-increment’ is non-nil and the field is an integer or a timestamp, it will be incremented while copying. By default, increment by the difference between the value in the current field and the one in the field above. To increment using a fixed integer, set ‘org-table-copy-increment’ to a number. In the case of a timestamp, increment by days. :PROPERTIES: :CUSTOM_ID: org-agenda-cycle-show :END: ## org-agenda-archive Show the current entry in another window, with default settings. Default settings are taken from ‘org-show-context-detail’. When use repeatedly in immediate succession, the remote entry will cycle through visibility children -> subtree -> folded When called with a numeric prefix arg, that arg will be passed through to ‘org-agenda-show-1’. For the interpretation of that argument, see the docstring of ‘org-agenda-show-1’. :PROPERTIES: :CUSTOM_ID: org-agenda-archive :END: ## org-babel-lob-execute-maybe Archive the entry or subtree belonging to the current agenda entry. :PROPERTIES: :CUSTOM_ID: org-babel-lob-execute-maybe :END: ## org-timestamp-down (&optional arg) Execute a Library of Babel source block, if appropriate. Detect if this is context for a Library Of Babel source block and if so then run the appropriate source block from the Library. :PROPERTIES: :CUSTOM_ID: org-timestamp-down :END: ## org-agenda-next-date-line (&optional arg) Decrease the date item at the cursor by one. If the cursor is on the year, change the year. If it is on the month, the day or the time, change that. With prefix ARG, change by that many units. :PROPERTIES: :CUSTOM_ID: org-agenda-next-date-line :END: ## org-agenda-show-and-scroll-up (&optional arg) Jump to the next line indicating a date in agenda buffer. :PROPERTIES: :CUSTOM_ID: org-agenda-show-and-scroll-up :END: ## org-mouse-move-tree (event) Display the Org file which contains the item at point. When called repeatedly, scroll the window that is displaying the buffer. With a ‘C-u’ prefix, use ‘org-show-entry’ instead of ‘outline-show-subtree’ to display the item, so that drawers and logbooks stay folded. :PROPERTIES: :CUSTOM_ID: org-mouse-move-tree :END: ## org-timestamp-up (&optional arg) :PROPERTIES: :CUSTOM_ID: org-timestamp-up :END: ## org-mouse-show-headlines Increase the date item at the cursor by one. If the cursor is on the year, change the year. If it is on the month, the day or the time, change that. With prefix ARG, change by that many units. :PROPERTIES: :CUSTOM_ID: org-mouse-show-headlines :END: ## org-publish (project &optional force async) Change the visibility of the current org buffer to only show headlines. :PROPERTIES: :CUSTOM_ID: org-publish :END: ## org-speedbar-set-agenda-restriction Publish PROJECT. PROJECT is either a project name, as a string, or a project alist (see ‘org-publish-project-alist’ variable). When optional argument FORCE is non-nil, force publishing all files in PROJECT. With a non-nil optional argument ASYNC, publishing will be done asynchronously, in another process. :PROPERTIES: :CUSTOM_ID: org-speedbar-set-agenda-restriction :END: ## org-mark-ring-push (&optional pos buffer) Restrict future agenda commands to the location at point in speedbar. To get rid of the restriction, use ‘C-c C-x >’. :PROPERTIES: :CUSTOM_ID: org-mark-ring-push :END: ## org-mouse-timestamp-today (&optional shift units) Put the current position or POS into the mark ring and rotate it. :PROPERTIES: :CUSTOM_ID: org-mouse-timestamp-today :END: ## org-shiftup (&optional arg) Change the timestamp into SHIFT UNITS in the future. For the acceptable UNITS, see ‘org-timestamp-change’. :PROPERTIES: :CUSTOM_ID: org-shiftup :END: ## org-archive-to-archive-sibling Increase item in timestamp or increase priority of current headline. Calls ‘org-timestamp-up’ or ‘org-priority-up’, or ‘org-previous-item’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-archive-to-archive-sibling :END: ## org-publish-project (project &optional force async) Archive the current heading by moving it under the archive sibling. The archive sibling is a sibling of the heading with the heading name ‘org-archive-sibling-heading’ and an ‘org-archive-tag’ tag. If this sibling does not exist, it will be created at the end of the subtree. Archiving time is retained in the ARCHIVE_TIME node property. :PROPERTIES: :CUSTOM_ID: org-publish-project :END: ## org-table-convert-region (beg0 end0 &optional separator) Publish PROJECT. PROJECT is either a project name, as a string, or a project alist (see ‘org-publish-project-alist’ variable). When optional argument FORCE is non-nil, force publishing all files in PROJECT. With a non-nil optional argument ASYNC, publishing will be done asynchronously, in another process. :PROPERTIES: :CUSTOM_ID: org-table-convert-region :END: ## org-goto-left Convert region to a table. The region goes from BEG0 to END0, but these borders will be moved slightly, to make sure a beginning of line in the first line is included. SEPARATOR specifies the field separator in the lines. It can have the following values: (4) Use the comma as a field separator (16) Use a TAB as field separator (64) Prompt for a regular expression as field separator integer When a number, use that many spaces, or a TAB, as field separator regexp When a regular expression, use it to match the separator nil When nil, the command tries to be smart and figure out the separator in the following way: - when each line contains a TAB, assume TAB-separated material - when each line contains a comma, assume CSV material - else, assume one or more SPACE characters as separator. :PROPERTIES: :CUSTOM_ID: org-goto-left :END: ## org-babel-goto-src-block-head Finish ‘org-goto’ by going to the new location. :PROPERTIES: :CUSTOM_ID: org-babel-goto-src-block-head :END: ## org-down-element Go to the beginning of the current code block. :PROPERTIES: :CUSTOM_ID: org-down-element :END: ## org-shiftmetaright Move to inner element. :PROPERTIES: :CUSTOM_ID: org-shiftmetaright :END: ## org-edit-export-block Demote subtree or insert table column. Calls ‘org-demote-subtree’, ‘org-indent-item-tree’, or ‘org-table-insert-column’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-edit-export-block :END: ## org-babel-remove-result (&optional info keep-keyword) Edit export block at point. A new buffer is created and the block is copied into it, and the buffer is switched into an appropriate major mode. See also ‘org-src-lang-modes’. When done, exit with ‘C-c '’. The edited text will then replace the area in the Org mode buffer. Throw an error when not at an export block. :PROPERTIES: :CUSTOM_ID: org-babel-remove-result :END: ## org-md-export-to-markdown (&optional async subtreep visible-only) Remove the result of the current source block. :PROPERTIES: :CUSTOM_ID: org-md-export-to-markdown :END: ## org-decrypt-entries Export current buffer to a Markdown file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-decrypt-entries :END: ## org-timer-item (&optional arg) Decrypt all entries in the current buffer. :PROPERTIES: :CUSTOM_ID: org-timer-item :END: ## org-clock-update-time-maybe Insert a description-type item with the current timer value. :PROPERTIES: :CUSTOM_ID: org-clock-update-time-maybe :END: ## org-reftex-citation If this is a CLOCK line, update it and return t. Otherwise, return nil. :PROPERTIES: :CUSTOM_ID: org-reftex-citation :END: ## org-speed-command-help Use reftex-citation to insert a citation into the buffer. This looks for a line like #+BIBLIOGRAPHY: foo plain option:-d and derives from it that foo.bib is the bibliography file relevant for this document. It then installs the necessary environment for RefTeX to work in this buffer and calls ‘reftex-citation’ to insert a citation into the buffer. Export of such citations to both LaTeX and HTML is handled by the contributed package ox-bibtex by Taru Karttunen. :PROPERTIES: :CUSTOM_ID: org-speed-command-help :END: ## org-clock-report (&optional arg) Show the available speed commands. :PROPERTIES: :CUSTOM_ID: org-clock-report :END: ## orgtbl-ret Create a table containing a report about clocked time. If the cursor is inside an existing clocktable block, then the table will be updated. If not, a new clocktable will be inserted. The scope of the new clock will be subtree when called from within a subtree, and file elsewhere. When called with a prefix argument, move to the first clock table in the buffer and update it. :PROPERTIES: :CUSTOM_ID: orgtbl-ret :END: Justification and field motion for ‘orgtbl-mode’. :PROPERTIES: :CUSTOM_ID: org-activate-plain-links :END: ## org-attach-set-inherit Do nothing and return nil. This function accepts any number of arguments, but ignores them. (fn &rest IGNORE) :PROPERTIES: :CUSTOM_ID: org-attach-set-inherit :END: ## org-clock-mark-default-task Set the ATTACH_DIR_INHERIT property of the current entry. The property defines the directory that is used for attachments of the entry and any children that do not explicitly define (by setting the ATTACH_DIR property) their own attachment directory. :PROPERTIES: :CUSTOM_ID: org-clock-mark-default-task :END: ## org-agenda-later (arg) Mark current task as default task. :PROPERTIES: :CUSTOM_ID: org-agenda-later :END: ## org-feed-update (feed &optional retrieve-only) Go forward in time by the current span. With prefix ARG, go forward that many times the current span. :PROPERTIES: :CUSTOM_ID: org-feed-update :END: ## org-agenda-date-prompt (arg) Get inbox items from FEED. FEED can be a string with an association in ‘org-feed-alist’, or it can be a list structured like an entry in ‘org-feed-alist’. :PROPERTIES: :CUSTOM_ID: org-agenda-date-prompt :END: ## org-agenda-view-mode-dispatch Change the date of this item. Date is prompted for, with default today. The prefix ARG is passed to the ‘org-time-stamp’ command and can therefore be used to request time specification in the time stamp. :PROPERTIES: :CUSTOM_ID: org-agenda-view-mode-dispatch :END: ## org-agenda-show-mouse (ev) Call one of the view mode commands. :PROPERTIES: :CUSTOM_ID: org-agenda-show-mouse :END: ## org-agenda-remove-filter (type) Display the Org file which contains the item at the mouse click. :PROPERTIES: :CUSTOM_ID: org-agenda-remove-filter :END: ## org-agenda-set-tags (&optional tag onoff) :PROPERTIES: :CUSTOM_ID: org-agenda-set-tags :END: ## org-clock-remove-overlays (&optional _beg _end noremove) Set tags for the current headline. :PROPERTIES: :CUSTOM_ID: org-clock-remove-overlays :END: ## org-set-property (property value) Remove the occur highlights from the buffer. If NOREMOVE is nil, remove this function from the ‘before-change-functions’ in the current buffer. :PROPERTIES: :CUSTOM_ID: org-set-property :END: In the current entry, set PROPERTY to VALUE. When called interactively, this will prompt for a property name, offering completion on existing and default properties. And then it will prompt for a value, offering completion either on allowed values (via an inherited xxx_ALL property) or on existing values in other instances of this property in the current file. Throw an error when trying to set a property with an invalid name. :PROPERTIES: :CUSTOM_ID: org-store-link :END: ## org-toggle-item (arg) Store an org-link to the current location. This link is added to ‘org-stored-links’ and can later be inserted into an Org buffer with ‘org-insert-link’ (‘C-c C-l’). For some link types, a ‘C-u’ prefix ARG is interpreted. A single ‘C-u’ negates ‘org-context-in-file-links’ for file links or ‘org-gnus-prefer-web-links’ for links to Usenet articles. A ‘C-u C-u’ prefix ARG forces skipping storing functions that are not part of Org core. A ‘C-u C-u C-u’ prefix ARG forces storing a link for each line in the active region. :PROPERTIES: :CUSTOM_ID: org-toggle-item :END: ## orgtbl-tab (arg) Convert headings or normal lines to items, items to normal lines. If there is no active region, only the current line is considered. If the first non blank line in the region is a headline, convert all headlines to items, shifting text accordingly. If it is an item, convert all items to normal lines. If it is normal text, change region into a list of items. With a prefix argument ARG, change the region in a single item. :PROPERTIES: :CUSTOM_ID: orgtbl-tab :END: ## org-table-insert-row (&optional arg) Justification and field motion for ‘orgtbl-mode’. :PROPERTIES: :CUSTOM_ID: org-table-insert-row :END: ## org-agenda-show-1 (&optional more) Insert a new row above the current line into the table. With prefix ARG, insert below the current line. :PROPERTIES: :CUSTOM_ID: org-agenda-show-1 :END: ## orgstruct-error Display the Org file which contains the item at point. The prefix arg selects the amount of information to display: 0 hide the subtree 1 just show the entry according to defaults. 2 show the children view 3 show the subtree view 4 show the entire subtree and any LOGBOOK drawers 5 show the entire subtree and any drawers With prefix argument FULL-ENTRY, make the entire entry visible if it was hidden in the outline. :PROPERTIES: :CUSTOM_ID: orgstruct-error :END: ## org-table-edit-formulas Error when there is no default binding for a structure key. :PROPERTIES: :CUSTOM_ID: org-table-edit-formulas :END: ## org-escape-code-in-region (beg end) Edit the formulas of the current table in a separate buffer. :PROPERTIES: :CUSTOM_ID: org-escape-code-in-region :END: ## org-timer (&optional restart no-insert) Escape lines between BEG and END. Escaping happens when a line starts with "*", "#+", ",*" or ",#+" by appending a comma to it. :PROPERTIES: :CUSTOM_ID: org-timer :END: ## org-element-cache-reset (&optional all) Insert a H:MM:SS string from the timer into the buffer. The first time this command is used, the timer is started. When used with a ‘C-u’ prefix, force restarting the timer. When used with a ‘C-u C-u’ prefix, change all the timer strings in the region by a fixed amount. This can be used to re-calibrate a timer that was not started at the correct moment. If NO-INSERT is non-nil, return the string instead of inserting it in the buffer. :PROPERTIES: :CUSTOM_ID: org-element-cache-reset :END: ## org-backward-paragraph Reset cache in current buffer. When optional argument ALL is non-nil, reset cache in all Org buffers. :PROPERTIES: :CUSTOM_ID: org-backward-paragraph :END: ## org-agenda-show (&optional full-entry) Move backward to start of previous paragraph or equivalent. The function moves point to the beginning of the current structural element, which can be a paragraph, a table, a list item, etc., or to the beginning of the previous visible one if point is already there. It also provides some special moves for convenience: - On an affiliated keyword, jump to the first one. - On a table or a property drawer, move to its beginning. - On a verse or source block, stop before blank lines. :PROPERTIES: :CUSTOM_ID: org-agenda-show :END: ## org-table-kill-row Display the Org file which contains the item at point. With prefix argument FULL-ENTRY, make the entire entry visible if it was hidden in the outline. :PROPERTIES: :CUSTOM_ID: org-table-kill-row :END: ## org-agenda-Quit Delete the current row or horizontal line from the table. :PROPERTIES: :CUSTOM_ID: org-agenda-Quit :END: ## org-icalendar-combine-agenda-files (&optional async) Exit the agenda, killing the agenda buffer. Like ‘org-agenda-quit’, but kill the buffer even when ‘org-agenda-sticky’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-icalendar-combine-agenda-files :END: ## org-agenda-archive-default Combine all agenda files into a single iCalendar file. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. The file is stored under the name chosen in ‘org-icalendar-combined-agenda-file’. :PROPERTIES: :CUSTOM_ID: org-agenda-archive-default :END: ## org-agenda-kill-all-agenda-buffers Archive the entry or subtree belonging to the current agenda entry. :PROPERTIES: :CUSTOM_ID: org-agenda-kill-all-agenda-buffers :END: ## org-agenda-bulk-action (&optional arg) Kill all buffers in ‘org-agenda-mode’. This is used when toggling sticky agendas. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-action :END: ## org-resolve-clocks (&optional only-dangling-p prompt-fn last-valid) Execute an remote-editing action on all marked entries. The prefix arg is passed through to the command if possible. :PROPERTIES: :CUSTOM_ID: org-resolve-clocks :END: ## org-babel-lilypond-toggle-midi-play Resolve all currently open Org clocks. If ‘only-dangling-p’ is non-nil, only ask to resolve dangling (i.e., not currently open and valid) clocks. :PROPERTIES: :CUSTOM_ID: org-babel-lilypond-toggle-midi-play :END: ## org-move-subtree-up (&optional arg) Toggle whether midi will be played following a successful compilation. :PROPERTIES: :CUSTOM_ID: org-move-subtree-up :END: ## org-reveal (&optional siblings) Move the current subtree up past ARG headlines of the same level. :PROPERTIES: :CUSTOM_ID: org-reveal :END: ## org-export-dispatch (&optional arg) Show current entry, hierarchy above it, and the following headline. This can be used to show a consistent set of context around locations exposed with ‘org-show-context’. With optional argument SIBLINGS, on each level of the hierarchy all siblings are shown. This repairs the tree structure to what it would look like when opened with hierarchical calls to ‘org-cycle’. With a C-u C-u prefix, go to the parent and show the entire tree. :PROPERTIES: :CUSTOM_ID: org-export-dispatch :END: ## org-table-overlay-coordinates Export dispatcher for Org mode. It provides an access to common export related tasks in a buffer. Its interface comes in two flavors: standard and expert. While both share the same set of bindings, only the former displays the valid keys associations in a dedicated buffer. Scrolling (resp. line-wise motion) in this buffer is done with SPC and DEL (resp. C-n and C-p) keys. Set variable ‘org-export-dispatch-use-expert-ui’ to switch to one flavor or the other. When ARG is ‘C-u’, repeat the last export action, with the same set of options used back then, on the current buffer. When ARG is ‘C-u C-u’, display the asynchronous export stack. :PROPERTIES: :CUSTOM_ID: org-table-overlay-coordinates :END: ## org-lint--jump-to-source Add overlays to the table at point, to show row/column coordinates. :PROPERTIES: :CUSTOM_ID: org-lint--jump-to-source :END: ## org-columns-next-allowed-value (&optional previous nth) Move to source line that generated the report at point. :PROPERTIES: :CUSTOM_ID: org-columns-next-allowed-value :END: ## org-smart-reschedule (quality) Switch to the next allowed value for this column. When PREVIOUS is set, go to the previous value. When NTH is an integer, select that value. :PROPERTIES: :CUSTOM_ID: org-smart-reschedule :END: ## org-table-end-of-field (&optional n) :PROPERTIES: :CUSTOM_ID: org-table-end-of-field :END: ## org-agenda-recenter (arg) Move to the end of the current table field. If already at or after the end, move to the end of the next table field. With numeric argument N, move N-1 fields forward first. :PROPERTIES: :CUSTOM_ID: org-agenda-recenter :END: ## org-attach-delete-all (&optional force) Display the Org file which contains the item at point and recenter. :PROPERTIES: :CUSTOM_ID: org-attach-delete-all :END: ## org-toggle-inline-images (&optional include-linked) Delete all attachments from the current task. This actually deletes the entire attachment directory. A safer way is to open the directory in dired and delete from there. :PROPERTIES: :CUSTOM_ID: org-toggle-inline-images :END: ## org-columns-insert-dblock Toggle the display of inline images. INCLUDE-LINKED is passed to ‘org-display-inline-images’. :PROPERTIES: :CUSTOM_ID: org-columns-insert-dblock :END: ## org-feed-goto-inbox (feed) Create a dynamic block capturing a column view table. :PROPERTIES: :CUSTOM_ID: org-feed-goto-inbox :END: ## org-decrease-number-at-point (&optional inc) Go to the inbox that captures the feed named FEED. :PROPERTIES: :CUSTOM_ID: org-decrease-number-at-point :END: ## org-edit-src-abort Decrement the number at point. With an optional prefix numeric argument INC, decrement using this numeric value. :PROPERTIES: :CUSTOM_ID: org-edit-src-abort :END: Abort editing of the src code and return to the Org buffer. :PROPERTIES: :CUSTOM_ID: org-id-store-link :END: ## org-tags-sparse-tree (&optional todo-only match) Store a link to the current entry, using its ID. :PROPERTIES: :CUSTOM_ID: org-tags-sparse-tree :END: ## org-agenda-bulk-toggle Create a sparse tree according to tags string MATCH. MATCH is a string with match syntax. It can contain a selection of tags ("+work+urgent-boss"), properties ("LEVEL>3"), and TODO keywords ("TODO=\"WAITING\"") or a combination of those. See the manual for details. If optional argument TODO-ONLY is non-nil, only select lines that are also TODO tasks. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-toggle :END: ## org-ctrl-c-ret Toggle the mark at point for bulk action. :PROPERTIES: :CUSTOM_ID: org-ctrl-c-ret :END: ## org-agenda-date-earlier-minutes (arg) Call ‘org-table-hline-and-move’ or ‘org-insert-heading’ dep. on context. :PROPERTIES: :CUSTOM_ID: org-agenda-date-earlier-minutes :END: ## org-agenda-bulk-mark-all Change the time of this item, in units of ‘org-time-stamp-rounding-minutes’. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark-all :END: ## org-cancel-repeater Mark all entries for future agenda bulk action. :PROPERTIES: :CUSTOM_ID: org-cancel-repeater :END: ## org-babel-lilypond-toggle-arrange-mode Cancel a repeater by setting its numeric value to zero. :PROPERTIES: :CUSTOM_ID: org-babel-lilypond-toggle-arrange-mode :END: ## org-footnote-goto-definition (label &optional location) Toggle whether in Arrange mode or Basic mode. :PROPERTIES: :CUSTOM_ID: org-footnote-goto-definition :END: ## org-agenda-filter-by-regexp (strip) Move point to the definition of the footnote LABEL. LOCATION, when non-nil specifies the buffer position of the definition. Throw an error if there is no definition or if it cannot be reached from current narrowed part of buffer. Return a non-nil value if point was successfully moved. :PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-regexp :END: ## org-agenda-fontify-priorities Filter agenda entries by a regular expression. Regexp filters are cumulative. With no prefix argument, keep entries matching the regexp. With one prefix argument, filter out entries matching the regexp. With two prefix arguments, remove the regexp filters. :PROPERTIES: :CUSTOM_ID: org-agenda-fontify-priorities :END: ## org-shiftright (&optional arg) Make highest priority lines bold, and lowest italic. :PROPERTIES: :CUSTOM_ID: org-shiftright :END: • Access: <S-right>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Next keyword>, <menu-bar> <Org> <Dates and Scheduling> <Change Date> <1 Day Later> • In file: org.el • Find modifications in git logs ## org-agenda-refile (&optional goto rfloc no-update) Cycle the thing at point or in the current line, depending on context. Depending on context, this does one of the following: - switch a timestamp at point one day into the future - on a headline, switch to the next TODO keyword. - on an item, switch entire list to the next bullet type - on a property line, switch to the next allowed value - on a clocktable definition line, move time block into the future :PROPERTIES: :CUSTOM_ID: org-agenda-refile :END: ## org-caldav-sync Refile the item at point. When called with ‘C-u C-u’, go to the location of the last refiled item. When called with ‘C-u C-u C-u’ prefix or when GOTO is 0, clear the refile cache. RFLOC can be a refile location obtained in a different way. When NO-UPDATE is non-nil, don’t redo the agenda buffer. :PROPERTIES: :CUSTOM_ID: org-caldav-sync :END: ## org-shiftmetaleft Sync Org with calendar. :PROPERTIES: :CUSTOM_ID: org-shiftmetaleft :END: ## org-habit-toggle-habits Promote subtree or delete table column. Calls ‘org-promote-subtree’, ‘org-outdent-item-tree’, or ‘org-table-delete-column’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-habit-toggle-habits :END: ## org-columns-move-left Toggle display of habits in an agenda buffer. :PROPERTIES: :CUSTOM_ID: org-columns-move-left :END: ## org-bibtex-read-buffer (buffer) Swap this column with the one to the left. :PROPERTIES: :CUSTOM_ID: org-bibtex-read-buffer :END: ## org-agenda-show-scroll-down Read all bibtex entries in BUFFER and save to ‘org-bibtex-entries’. Return the number of saved entries. :PROPERTIES: :CUSTOM_ID: org-agenda-show-scroll-down :END: ## org-clock-timestamps-up (&optional n) Scroll down the window showing the agenda. :PROPERTIES: :CUSTOM_ID: org-clock-timestamps-up :END: ## org-w3m-copy-for-org-mode Increase CLOCK timestamps at cursor. Optional argument N tells to change by that many units. :PROPERTIES: :CUSTOM_ID: org-w3m-copy-for-org-mode :END: ## org-next-visible-heading (arg) Copy current buffer content or active region with ‘org-mode’ style links. This will encode ‘link-title’ and ‘link-location’ with ‘org-make-link-string’, and insert the transformed test into the kill ring, so that it can be yanked into an Org buffer with links working correctly. :PROPERTIES: :CUSTOM_ID: org-next-visible-heading :END: ## org-encrypt-entry Move to the next visible heading. This function wraps ‘outline-next-visible-heading’ with ‘org-with-limited-levels’ in order to skip over inline tasks and respect customization of ‘org-odd-levels-only’. :PROPERTIES: :CUSTOM_ID: org-encrypt-entry :END: ## org-columns-previous-allowed-value Encrypt the content of the current headline. :PROPERTIES: :CUSTOM_ID: org-columns-previous-allowed-value :END: ## org-delete-directory (directory &optional recursive trash) Switch to the previous allowed value for this column. :PROPERTIES: :CUSTOM_ID: org-delete-directory :END: ## org-table-paste-rectangle Delete the directory named DIRECTORY. Does not follow symlinks. If RECURSIVE is non-nil, delete files in DIRECTORY as well, with no error if something else is simultaneously deleting them. TRASH non-nil means to trash the directory instead, provided ‘delete-by-moving-to-trash’ is non-nil. When called interactively, TRASH is nil if and only if a prefix argument is given, and a further prompt asks the user for RECURSIVE if DIRECTORY is nonempty. (fn DIRECTORY &optional RECURSIVE TRASH) :PROPERTIES: :CUSTOM_ID: org-table-paste-rectangle :END: ## org-babel-exp-src-block Paste a rectangular region into a table. The upper right corner ends up in the current field. All involved fields will be overwritten. If the rectangle does not fit into the present table, the table is enlarged as needed. The process ignores horizontal separator lines. :PROPERTIES: :CUSTOM_ID: org-babel-exp-src-block :END: ## org-indent-mode (&optional arg) Process source block for export. Depending on the ":export" header argument, replace the source code block like this: both ---- display the code and the results code ---- the default, display the code inside the block but do not process results - just like none only the block is run on export ensuring that its results are present in the Org mode buffer none ---- do not display either code or results upon export Assume point is at block opening line. :PROPERTIES: :CUSTOM_ID: org-indent-mode :END: ## org-cdlatex-underscore-caret (&optional _arg) When active, indent text according to outline structure. Internally this works by adding ‘line-prefix’ and ‘wrap-prefix’ properties, after each buffer modification, on the modified zone. The process is synchronous. Though, initial indentation of buffer, which can take a few seconds on large buffers, is done during idle time. :PROPERTIES: :CUSTOM_ID: org-cdlatex-underscore-caret :END: ## org-src-do-key-sequence-at-code-block (&optional key) Execute ‘cdlatex-sub-superscript’ in LaTeX fragments. Revert to the normal definition outside of these fragments. :PROPERTIES: :CUSTOM_ID: org-src-do-key-sequence-at-code-block :END: ## org-texinfo-export-to-texinfo (&optional async subtreep visible-only body-only ext-plist) Execute key sequence at code block in the source Org buffer. The command bound to KEY in the Org-babel key map is executed remotely with point temporarily at the start of the code block in the Org buffer. This command is not bound to a key by default, to avoid conflicts with language major mode bindings. To bind it to C-c @ in all language major modes, you could use (add-hook 'org-src-mode-hook (lambda () (define-key org-src-mode-map "\C-c@" 'org-src-do-key-sequence-at-code-block))) In that case, for example, C-c @ t issued in code edit buffers would tangle the current Org code block, C-c @ e would execute the block and C-c @ h would display the other available Org-babel commands. :PROPERTIES: :CUSTOM_ID: org-texinfo-export-to-texinfo :END: ## org-indent-item Export current buffer to a Texinfo file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{document}" and "\end{document}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-indent-item :END: ## org-table-recalculate-buffer-tables Indent a local list item, but not its children. If a region is active, all items inside will be moved. :PROPERTIES: :CUSTOM_ID: org-table-recalculate-buffer-tables :END: ## org-toggle-heading (&optional nstars) Recalculate all tables in the current buffer. :PROPERTIES: :CUSTOM_ID: org-toggle-heading :END: ## org-shiftmetadown (&optional _arg) Convert headings to normal text, or items or text to headings. If there is no active region, only convert the current line. With a ‘C-u’ prefix, convert the whole list at point into heading. In a region: - If the first non blank line is a headline, remove the stars from all headlines in the region. - If it is a normal line, turn each and every normal line (i.e., not an heading or an item) in the region into headings. If you want to convert only the first line of this region, use one universal prefix argument. - If it is a plain list item, turn all plain list items into headings. When converting a line into a heading, the number of stars is chosen such that the lines become children of the current entry. However, when a numeric prefix argument is given, its value determines the number of stars to add. :PROPERTIES: :CUSTOM_ID: org-shiftmetadown :END: ## org-content (&optional arg) Drag the line at point down. In a table, insert an empty row at the current line. On a clock timestamp, update the value of the timestamp like ‘S-’ but also adjust the previous clocked item in the clock history. Everywhere else, drag the line at point down. :PROPERTIES: :CUSTOM_ID: org-content :END: ## org-outdent-item Show all headlines in the buffer, like a table of contents. With numerical argument N, show content up to level N. :PROPERTIES: :CUSTOM_ID: org-outdent-item :END: ## org-latex-convert-region-to-latex Outdent a local list item, but not its children. If a region is active, all items inside will be moved. :PROPERTIES: :CUSTOM_ID: org-latex-convert-region-to-latex :END: ## org-bibtex-yank Assume the current region has Org syntax, and convert it to LaTeX. This can be used in any buffer. For example, you can write an itemized list in Org syntax in an LaTeX buffer and use this command to convert it. :PROPERTIES: :CUSTOM_ID: org-bibtex-yank :END: ## org-columns-move-right If kill ring holds a bibtex entry yank it as an Org headline. :PROPERTIES: :CUSTOM_ID: org-columns-move-right :END: ## org-latex-export-as-latex (&optional async subtreep visible-only body-only ext-plist) Swap this column with the one to the right. :PROPERTIES: :CUSTOM_ID: org-latex-export-as-latex :END: ## org-agenda-write (file &optional open nosettings agenda-bufname) Export current buffer as a LaTeX buffer. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting buffer should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{document}" and "\end{document}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Export is done in a buffer named "*Org LATEX Export*", which will be displayed when ‘org-export-show-temporary-export-buffer’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-agenda-write :END: ## org-move-item-down Write the current buffer (an agenda view) as a file. Depending on the extension of the file name, plain text (.txt), HTML (.html or .htm), PDF (.pdf) or Postscript (.ps) is produced. If the extension is .ics, translate visible agenda into iCalendar format. If the extension is .org, collect all subtrees corresponding to the agenda entries and add them in an .org file. With prefix argument OPEN, open the new file immediately. If NOSETTINGS is given, do not scope the settings of ‘org-agenda-exporter-settings’ into the export commands. This is used when the settings have already been scoped and we do not wish to overrule other, higher priority settings. If AGENDA-BUFFER-NAME is provided, use this as the buffer name for the agenda to write. :PROPERTIES: :CUSTOM_ID: org-move-item-down :END: ## org-bibtex-write Move the item at point down, i.e. swap with following item. Sub-items (items with larger indentation) are considered part of the item, so this really moves item trees. :PROPERTIES: :CUSTOM_ID: org-bibtex-write :END: ## org-cut-special Insert a heading built from the first element of ‘org-bibtex-entries’. :PROPERTIES: :CUSTOM_ID: org-cut-special :END: Cut region in table or cut current subtree. Calls ‘org-table-cut-region’ or ‘org-cut-subtree’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-occur-link-in-agenda-files :END: ## org-update-dblock Create a link and search for it in the agendas. The link is not stored in ‘org-stored-links’, it is just created for the search purpose. :PROPERTIES: :CUSTOM_ID: org-update-dblock :END: ## org-odt-export-to-odt (&optional async subtreep visible-only ext-plist) Update the dynamic block at point. This means to empty the block, parse for parameters and then call the correct writing function. :PROPERTIES: :CUSTOM_ID: org-odt-export-to-odt :END: ## org-table-fedit-line-down Export current buffer to a ODT file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-table-fedit-line-down :END: ## org-calendar-select Move cursor one line down in the window showing the table. :PROPERTIES: :CUSTOM_ID: org-calendar-select :END: ## org-bibtex-export-to-kill-ring Return to ‘org-read-date’ with the date currently selected. This is used by ‘org-read-date’ in a temporary keymap for the calendar buffer. :PROPERTIES: :CUSTOM_ID: org-bibtex-export-to-kill-ring :END: ## org-beamer-export-to-latex (&optional async subtreep visible-only body-only ext-plist) Export current headline to kill ring as bibtex entry. :PROPERTIES: :CUSTOM_ID: org-beamer-export-to-latex :END: ## org-search-view (&optional todo-only string edit-at) Export current buffer as a Beamer presentation (tex). If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{document}" and "\end{document}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-search-view :END: ## org-table-goto-column (n &optional on-delim force) Show all entries that contain a phrase or words or regular expressions. With optional prefix argument TODO-ONLY, only consider entries that are TODO entries. The argument STRING can be used to pass a default search string into this function. If EDIT-AT is non-nil, it means that the user should get a chance to edit this string, with cursor at position EDIT-AT. The search string can be viewed either as a phrase that should be found as is, or it can be broken into a number of snippets, each of which must match in a Boolean way to select an entry. The default depends on the variable ‘org-agenda-search-view-always-boolean’. Even if this is turned off (the default) you can always switch to Boolean search dynamically by preceding the first word with "+" or "-". The default is a direct search of the whole phrase, where each space in the search string can expand to an arbitrary amount of whitespace, including newlines. If using a Boolean search, the search string is split on whitespace and each snippet is searched separately, with logical AND to select an entry. Words prefixed with a minus must *not* occur in the entry. Words without a prefix or prefixed with a plus must occur in the entry. Matching is case-insensitive. Words are enclosed by word delimiters (i.e. they must match whole words, not parts of a word) if ‘org-agenda-search-view-force-full-words’ is set (default is nil). Boolean search snippets enclosed by curly braces are interpreted as regular expressions that must or (when preceded with "-") must not match in the entry. Snippets enclosed into double quotes will be taken as a whole, to include whitespace. - If the search string starts with an asterisk, search only in headlines. - If (possibly after the leading star) the search string starts with an exclamation mark, this also means to look at TODO entries only, an effect that can also be achieved with a prefix argument. - If (possibly after star and exclamation mark) the search string starts with a colon, this will mean that the (non-regexp) snippets of the Boolean search must match as full words. This command searches the agenda files, and in addition the files listed in ‘org-agenda-text-search-extra-files’. :PROPERTIES: :CUSTOM_ID: org-table-goto-column :END: ## org-evaluate-time-range (&optional to-buffer) Move the cursor to the Nth column in the current table line. With optional argument ON-DELIM, stop with point before the left delimiter of the field. If there are less than N fields, just go to after the last delimiter. However, when FORCE is non-nil, create new columns if necessary. :PROPERTIES: :CUSTOM_ID: org-evaluate-time-range :END: ## org-shiftcontrolup (&optional n) Evaluate a time range by computing the difference between start and end. Normally the result is just printed in the echo area, but with prefix arg TO-BUFFER, the result is inserted just after the date stamp into the buffer. If the time range is actually in a table, the result is inserted into the next column. For time difference computation, a year is assumed to be exactly 365 days in order to avoid rounding problems. :PROPERTIES: :CUSTOM_ID: org-shiftcontrolup :END: ## org-copy Change timestamps synchronously up in CLOCK log lines. Optional argument N tells to change by that many units. :PROPERTIES: :CUSTOM_ID: org-copy :END: ## org-agenda-manipulate-query-subtract-re Like ‘org-refile’, but copy. :PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-subtract-re :END: ## org-babel-goto-named-result (name) Manipulate the query by adding a search regexp with negative selection. Negative selection means regexp must not match for selection of an entry. :PROPERTIES: :CUSTOM_ID: org-babel-goto-named-result :END: ## org-check-deadlines (ndays) Go to a named result. :PROPERTIES: :CUSTOM_ID: org-check-deadlines :END: ## org-advertized-archive-subtree (&optional find-done) Check if there are any deadlines due or past due. A deadline is considered due if it happens within ‘org-deadline-warning-days’ days from today’s date. If the deadline appears in an entry marked DONE, it is not shown. A numeric prefix argument NDAYS can be used to test that many days. If the prefix is a raw ‘C-u’, all deadlines are shown. :PROPERTIES: :CUSTOM_ID: org-advertized-archive-subtree :END: ## org-texinfo-export-to-info (&optional async subtreep visible-only body-only ext-plist) Move the current subtree to the archive. The archive can be a certain top-level heading in the current file, or in a different file. The tree will be moved to that location, the subtree heading be marked DONE, and the current time will be added. When called with a single prefix argument FIND-DONE, find whole trees without any open TODO items and archive them (after getting confirmation from the user). When called with a double prefix argument, find whole trees with timestamps before today and archive them (after getting confirmation from the user). If the cursor is not at a headline when these commands are called, try all level 1 trees. If the cursor is on a headline, only try the direct children of this heading. :PROPERTIES: :CUSTOM_ID: org-texinfo-export-to-info :END: ## org-drag-element-forward Export current buffer to Texinfo then process through to INFO. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{document}" and "\end{document}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. When optional argument PUB-DIR is set, use it as the publishing directory. Return INFO file’s name. :PROPERTIES: :CUSTOM_ID: org-drag-element-forward :END: ## org-mouse-insert-checkbox Move forward element at point. :PROPERTIES: :CUSTOM_ID: org-mouse-insert-checkbox :END: ## org-cycle-level :PROPERTIES: :CUSTOM_ID: org-cycle-level :END: ## org-table-move-row-up Cycle the level of an empty headline through possible states. This goes first to child, then to parent, level, then up the hierarchy. After top level, it switches back to sibling level. :PROPERTIES: :CUSTOM_ID: org-table-move-row-up :END: ## org-mouse-show-context-menu (event prefix) Move table row up. :PROPERTIES: :CUSTOM_ID: org-mouse-show-context-menu :END: ## org-org-export-to-org (&optional async subtreep visible-only body-only ext-plist) Invoke the context menu. If the value of ‘org-mouse-context-menu-function’ is a function, then this function is called. Otherwise, the current major mode menu is used. :PROPERTIES: :CUSTOM_ID: org-org-export-to-org :END: ## org-delete-indentation (&optional arg) Export current buffer to an org file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, strip document keywords from output. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return output file name. :PROPERTIES: :CUSTOM_ID: org-delete-indentation :END: ## org-table-maybe-recalculate-line Join current line to previous and fix whitespace at join. If previous line is a headline add to headline title. Otherwise the function calls ‘delete-indentation’. With a non-nil optional argument, join it to the following one. :PROPERTIES: :CUSTOM_ID: org-table-maybe-recalculate-line :END: ## org-bibtex-check-all (&optional optional) Recompute the current line if marked for it, and if we haven’t just done it. :PROPERTIES: :CUSTOM_ID: org-bibtex-check-all :END: ## org-columns-compute (property) Check all headlines in the current file. With prefix argument OPTIONAL also prompt for optional fields. :PROPERTIES: :CUSTOM_ID: org-columns-compute :END: ## org-caldav-goto-uid Summarize the values of PROPERTY hierarchically. Also update existing values for PROPERTY according to the first column specification. :PROPERTIES: :CUSTOM_ID: org-caldav-goto-uid :END: ## org-babel-demarcate-block (&optional arg) Jump to UID unter point. :PROPERTIES: :CUSTOM_ID: org-babel-demarcate-block :END: ## org-insert-todo-heading (arg &optional force-heading) Wrap or split the code in the region or on the point. When called from inside of a code block the current block is split. When called from outside of a code block a new code block is created. In both cases if the region is demarcated and if the region is not active then the point is demarcated. :PROPERTIES: :CUSTOM_ID: org-insert-todo-heading :END: ## org-sort-entries (&optional with-case sorting-type getkey-func compare-func property interactive?) Insert a new heading with the same level and TODO state as current heading. If the heading has no TODO state, or if the state is DONE, use the first state (TODO by default). Also with one prefix arg, force first state. With two prefix args, force inserting at the end of the parent subtree. When called at a plain list item, insert a new item with an unchecked check box. :PROPERTIES: :CUSTOM_ID: org-sort-entries :END: ## orgtbl-self-insert-command (N) Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property, by priority order, or by a custom function. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, (?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F ?k ?K). Here is the precise meaning of each character: a Alphabetically, ignoring the TODO keyword and the priority, if any. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. d By deadline date/time. k By clocking time. n Numerically, by converting the beginning of the entry/item to a number. o By order of TODO keywords. p By priority according to the cookie. r By the value of a property. s By scheduled date/time. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return a value that is compatible with COMPARE-FUNC, the function used to compare entries. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well. Sorting is done against the visible part of the headlines, it ignores hidden links. When sorting is done, call ‘org-after-sorting-entries-or-items-hook’. A non-nil value for INTERACTIVE? is used to signal that this function is being called interactively. :PROPERTIES: :CUSTOM_ID: orgtbl-self-insert-command :END: ## org-table-sort-lines (&optional with-case sorting-type getkey-func compare-func interactive?) Like ‘self-insert-command’, use overwrite-mode for whitespace in tables. If the cursor is in a table looking at whitespace, the whitespace is overwritten, and the table is not marked as requiring realignment. :PROPERTIES: :CUSTOM_ID: org-table-sort-lines :END: ## org-agenda-clock-goto Sort table lines according to the column at point. The position of point indicates the column to be used for sorting, and the range of lines is the range between the nearest horizontal separator lines, or the entire table of no such lines exist. If point is before the first column, you will be prompted for the sorting column. If there is an active region, the mark specifies the first line and the sorting column, while point should be in the last line to be included into the sorting. The command then prompts for the sorting type which can be alphabetically, numerically, or by time (as given in a time stamp in the field, or as a HH:MM value). Sorting in reverse order is also possible. With prefix argument WITH-CASE, alphabetic sorting will be case-sensitive. If SORTING-TYPE is specified when this function is called from a Lisp program, no prompting will take place. SORTING-TYPE must be a character, any of (?a ?A ?n ?N ?t ?T ?f ?F) where the capital letters indicate that sorting should be done in reverse order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called to extract the key. It must return a value that is compatible with COMPARE-FUNC, the function used to compare entries. A non-nil value for INTERACTIVE? is used to signal that this function is being called interactively. :PROPERTIES: :CUSTOM_ID: org-agenda-clock-goto :END: ## org-agenda-backward-block Jump to the currently clocked in task within the agenda. If the currently clocked in task is not listed in the agenda buffer, display it in another window. :PROPERTIES: :CUSTOM_ID: org-agenda-backward-block :END: ## org-priority-down Move backward by one agenda block. :PROPERTIES: :CUSTOM_ID: org-priority-down :END: ## org-agenda-list (&optional arg start-day span with-hour) Decrease the priority of the current item. :PROPERTIES: :CUSTOM_ID: org-agenda-list :END: ## org-rss-export-to-rss (&optional async subtreep visible-only) Produce a daily/weekly view from all files in variable ‘org-agenda-files’. The view will be for the current day or week, but from the overview buffer you will be able to go to other days/weeks. With a numeric prefix argument in an interactive call, the agenda will span ARG days. Lisp programs should instead specify SPAN to change the number of days. SPAN defaults to ‘org-agenda-span’. START-DAY defaults to TODAY, or to the most recent match for the weekday given in ‘org-agenda-start-on-weekday’. When WITH-HOUR is non-nil, only include scheduled and deadline items if they have an hour specification like [h]h:mm. :PROPERTIES: :CUSTOM_ID: org-rss-export-to-rss :END: ## org-agenda-archive-to-archive-sibling Export current buffer to a RSS file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-agenda-archive-to-archive-sibling :END: ## org-icalendar-export-agenda-files (&optional async) Move the entry to the archive sibling. :PROPERTIES: :CUSTOM_ID: org-icalendar-export-agenda-files :END: ## org-toggle-pretty-entities Export all agenda files to iCalendar files. When optional argument ASYNC is non-nil, export happens in an external process. :PROPERTIES: :CUSTOM_ID: org-toggle-pretty-entities :END: ## org-set-tags (&optional arg just-align) Toggle the composition display of entities as UTF8 characters. :PROPERTIES: :CUSTOM_ID: org-set-tags :END: ## org-babel-sha1-hash (&optional info) Set the tags for the current headline. With prefix ARG, realign all tags in headings in the current buffer. When JUST-ALIGN is non-nil, only align tags. :PROPERTIES: :CUSTOM_ID: org-babel-sha1-hash :END: ## org-edit-src-continue (e) Generate an sha1 hash based on the value of info. :PROPERTIES: :CUSTOM_ID: org-edit-src-continue :END: ## org-edit-footnote-reference Unconditionally return to buffer editing area under point. Throw an error if there is no such buffer. :PROPERTIES: :CUSTOM_ID: org-edit-footnote-reference :END: ## org-shiftcontrolleft Edit definition of footnote reference at point. :PROPERTIES: :CUSTOM_ID: org-shiftcontrolleft :END: ## org-delete-char (N) Switch to previous TODO set. :PROPERTIES: :CUSTOM_ID: org-delete-char :END: ## org-babel-lilypond-toggle-png-generation Like ‘delete-char’, but insert whitespace at field end in tables. When deleting characters, in tables this function will insert whitespace in front of the next "|" separator, to keep the table aligned. The table will still be marked for re-alignment if the field did fill the entire column, because, in this case the deletion might narrow the column. :PROPERTIES: :CUSTOM_ID: org-babel-lilypond-toggle-png-generation :END: ## org-mark-element Toggle whether png image will be generated by compilation. :PROPERTIES: :CUSTOM_ID: org-mark-element :END: ## org-attach-attach (file &optional visit-dir method) Put point at beginning of this element, mark at end. Interactively, if this command is repeated or (in Transient Mark mode) if the mark is active, it marks the next element after the ones already marked. :PROPERTIES: :CUSTOM_ID: org-attach-attach :END: ## org-table-wrap-region (arg) Move/copy/link FILE into the attachment directory of the current task. If VISIT-DIR is non-nil, visit the directory with dired. METHOD may be ‘cp’, ‘mv’, ‘ln’, ‘lns’ or ‘url’ default taken from ‘org-attach-method’. :PROPERTIES: :CUSTOM_ID: org-table-wrap-region :END: ## org-demote-subtree Wrap several fields in a column like a paragraph. This is useful if you’d like to spread the contents of a field over several lines, in order to keep the table compact. If there is an active region, and both point and mark are in the same column, the text in the column is wrapped to minimum width for the given number of lines. Generally, this makes the table more compact. A prefix ARG may be used to change the number of desired lines. For example, ‘C-2 M-x org-table-wrap-region’ formats the selected text to two lines. If the region was longer than two lines, the remaining lines remain empty. A negative prefix argument reduces the current number of lines by that amount. The wrapped text is pasted back into the table. If you formatted it to more lines than it was before, fields further down in the table get overwritten - so you might need to make space in the table first. If there is no region, the current field is split at the cursor position and the text fragment to the right of the cursor is prepended to the field one line down. If there is no region, but you specify a prefix ARG, the current field gets blank, and the content is appended to the field above. :PROPERTIES: :CUSTOM_ID: org-demote-subtree :END: ## org-columns-menu (event) Demote the entire subtree. See ‘org-demote’ and ‘org-promote’. :PROPERTIES: :CUSTOM_ID: org-columns-menu :END: ## org-table-move-column (&optional left) Org Column Menu :PROPERTIES: :CUSTOM_ID: org-table-move-column :END: ## org-insert-heading (&optional arg invisible-ok top) Move the current column to the right. With arg LEFT, move to the left. :PROPERTIES: :CUSTOM_ID: org-insert-heading :END: ## org-shiftcontroldown (&optional n) Insert a new heading or an item with the same depth at point. If point is at the beginning of a heading, insert a new heading or a new headline above the current one. When at the beginning of a regular line of text, turn it into a heading. If point is in the middle of a line, split it and create a new headline with the text in the current line after point (see ‘org-M-RET-may-split-line’ on how to modify this behavior). As a special case, on a headline, splitting can only happen on the title itself. E.g., this excludes breaking stars or tags. With a ‘C-u’ prefix, set ‘org-insert-heading-respect-content’ to a non-nil value for the duration of the command. This forces the insertion of a heading after the current subtree, independently on the location of point. With a ‘C-u C-u’ prefix, insert the heading at the end of the tree above the current heading. For example, if point is within a 2nd-level heading, then it will insert a 2nd-level heading at the end of the 1st-level parent subtree. When INVISIBLE-OK is set, stop at invisible headlines when going back. This is important for non-interactive uses of the command. When optional argument TOP is non-nil, insert a level 1 heading, unconditionally. :PROPERTIES: :CUSTOM_ID: org-shiftcontroldown :END: ## org-agenda-to-appt (&optional refresh filter &rest args) Change timestamps synchronously down in CLOCK log lines. Optional argument N tells to change by that many units. :PROPERTIES: :CUSTOM_ID: org-agenda-to-appt :END: ## org-plot/gnuplot (&optional params) Activate appointments found in ‘org-agenda-files’. With a ‘C-u’ prefix, refresh the list of appointments. If FILTER is t, interactively prompt the user for a regular expression, and filter out entries that don’t match it. If FILTER is a string, use this string as a regular expression for filtering entries out. If FILTER is a function, filter out entries against which calling the function returns nil. This function takes one argument: an entry from ‘org-agenda-get-day-entries’. FILTER can also be an alist with the car of each cell being either ‘headline’ or ‘category’. For example: '((headline "IMPORTANT") (category "Work")) will only add headlines containing IMPORTANT or headlines belonging to the "Work" category. ARGS are symbols indicating what kind of entries to consider. By default ‘org-agenda-to-appt’ will use :deadline*, :scheduled* (i.e., deadlines and scheduled items with a hh:mm specification) and :timestamp entries. See the docstring of ‘org-diary’ for details and examples. If an entry has a APPT_WARNTIME property, its value will be used to override ‘appt-message-warning-time’. :PROPERTIES: :CUSTOM_ID: org-plot/gnuplot :END: ## org-goto-calendar (&optional arg) Plot table using gnuplot. Gnuplot options can be specified with PARAMS. If not given options will be taken from the +PLOT line directly before or after the table. :PROPERTIES: :CUSTOM_ID: org-goto-calendar :END: ## org-footnote-goto-previous-reference (label) Go to the Emacs calendar at the current date. If there is a time stamp in the current line, go to that date. A prefix ARG can be used to force the current date. :PROPERTIES: :CUSTOM_ID: org-footnote-goto-previous-reference :END: ## org-table-export (&optional file format) Find the first closest (to point) reference of footnote with label LABEL. :PROPERTIES: :CUSTOM_ID: org-table-export :END: ## org-global-cycle (&optional arg) Export table to a file, with configurable format. Such a file can be imported into usual spreadsheet programs. FILE can be the output file name. If not given, it will be taken from a TABLE_EXPORT_FILE property in the current entry or higher up in the hierarchy, or the user will be prompted for a file name. FORMAT can be an export format, of the same kind as it used when ‘orgtbl-mode’ sends a table in a different format. The command suggests a format depending on TABLE_EXPORT_FORMAT, whether it is set locally or up in the hierarchy, then on the extension of the given file name, and finally on the variable ‘org-table-export-default-format’. :PROPERTIES: :CUSTOM_ID: org-global-cycle :END: ## org-shiftleft (&optional arg) Cycle the global visibility. For details see ‘org-cycle’. With ‘C-u’ prefix ARG, switch to startup visibility. With a numeric prefix, show all headlines up to that level. :PROPERTIES: :CUSTOM_ID: org-shiftleft :END: • Access: <S-left>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Previous keyword>, <menu-bar> <Org> <Dates and Scheduling> <Change Date> <1 Day Earlier> • In file: org.el • Find modifications in git logs ## org-time-stamp (arg &optional inactive) Cycle the thing at point or in the current line, depending on context. Depending on context, this does one of the following: - switch a timestamp at point one day into the past - on a headline, switch to the previous TODO keyword. - on an item, switch entire list to the previous bullet type - on a property line, switch to the previous allowed value - on a clocktable definition line, move time block into the past :PROPERTIES: :CUSTOM_ID: org-time-stamp :END: ## org-ctags-create-tags (&optional directory-name) Prompt for a date/time and insert a time stamp. If the user specifies a time like HH:MM or if this command is called with at least one prefix argument, the time stamp contains the date and the time. Otherwise, only the date is included. All parts of a date not specified by the user are filled in from the timestamp at point, if any, or the current date/time otherwise. If there is already a timestamp at the cursor, it is replaced. With two universal prefix arguments, insert an active timestamp with the current time without prompting the user. When called from lisp, the timestamp is inactive if INACTIVE is non-nil. :PROPERTIES: :CUSTOM_ID: org-ctags-create-tags :END: ## org-columns--display-here-title (Re)create tags file in the directory of the active buffer. The file will contain tag definitions for all the files in the directory and its subdirectories which are recognized by ctags. This will include files ending in ‘.org’ as well as most other source files (.C, .H, .EL, .LISP, etc). All the resulting tags end up in one file, called TAGS, located in the directory. This function may take several seconds to finish if the directory or its subdirectories contain large numbers of taggable files. :PROPERTIES: :CUSTOM_ID: org-columns--display-here-title :END: ## org-babel-switch-to-session (&optional arg info) Overlay the newline before the current line with the table title. :PROPERTIES: :CUSTOM_ID: org-babel-switch-to-session :END: ## org-sparse-tree (&optional arg type) Switch to the session of the current code block. Uses ‘org-babel-initiate-session’ to start the session. If called with a prefix argument then this is passed on to ‘org-babel-initiate-session’. :PROPERTIES: :CUSTOM_ID: org-sparse-tree :END: ## org-capture (&optional goto keys) Create a sparse tree, prompt for the details. This command can create sparse trees. You first need to select the type of match used to create the tree: t Show all TODO entries. T Show entries with a specific TODO keyword. m Show entries selected by a tags/property match. p Enter a property name and its value (both with completion on existing names/values) and show entries with that property. r Show entries matching a regular expression (‘/’ can be used as well). b Show deadlines and scheduled items before a date. a Show deadlines and scheduled items after a date. d Show deadlines due within ‘org-deadline-warning-days’. D Show deadlines and scheduled items between a date range. :PROPERTIES: :CUSTOM_ID: org-capture :END: ## org-forward-paragraph Capture something. This will let you select a template from ‘org-capture-templates’, and then file the newly captured information. The text is immediately inserted at the target location, and an indirect buffer is shown where you can edit it. Pressing ‘C-c C-c’ brings you back to the previous state of Emacs, so that you can continue your work. When called interactively with a ‘C-u’ prefix argument GOTO, don’t capture anything, just go to the file/headline where the selected template stores its notes. With a ‘C-u C-u’ prefix argument, go to the last note stored. When called with a ‘C-0’ (zero) prefix, insert a template at point. When called with a ‘C-1’ (one) prefix, force prompting for a date when a datetree entry is made. ELisp programs can set KEYS to a string associated with a template in ‘org-capture-templates’. In this case, interactive selection will be bypassed. If ‘org-capture-use-agenda-date’ is non-nil, capturing from the agenda will use the date at point as the default date. Then, a ‘C-1’ prefix will tell the capture process to use the HH:MM time of the day at point (if any) or the current HH:MM time. :PROPERTIES: :CUSTOM_ID: org-forward-paragraph :END: ## org-protocol-create-for-org Move forward to beginning of next paragraph or equivalent. The function moves point to the beginning of the next visible structural element, which can be a paragraph, a table, a list item, etc. It also provides some special moves for convenience: - On an affiliated keyword, jump to the beginning of the relative element. - On an item or a footnote definition, move to the second element inside, if any. - On a table or a property drawer, jump after it. - On a verse or source block, stop after blank lines. :PROPERTIES: :CUSTOM_ID: org-protocol-create-for-org :END: Create a Org protocol project for the current file’s project. The visited file needs to be part of a publishing project in ‘org-publish-project-alist’ for this to work. The function delegates most of the work to ‘org-protocol-create’. :PROPERTIES: :CUSTOM_ID: org-agenda-open-link :END: ## org-edit-special (&optional arg) Open the link(s) in the current entry, if any. This looks for a link in the displayed line in the agenda. It also looks at the text of the entry itself. :PROPERTIES: :CUSTOM_ID: org-edit-special :END: ## org-display-inline-images (&optional include-linked refresh beg end) Call a special editor for the element at point. When at a table, call the formula editor with ‘org-table-edit-formulas’. When in a source code block, call ‘org-edit-src-code’. When in a fixed-width region, call ‘org-edit-fixed-width-region’. When in an export block, call ‘org-edit-export-block’. When in a LaTeX environment, call ‘org-edit-latex-environment’. When at an #+INCLUDE keyword, visit the included file. When at a footnote reference, call ‘org-edit-footnote-reference’ On a link, call ‘ffap’ to visit the link at point. Otherwise, return a user error. :PROPERTIES: :CUSTOM_ID: org-display-inline-images :END: ## org-capture-goto-last-stored Display inline images. An inline image is a link which follows either of these conventions: 1. Its path is a file with an extension matching return value from ‘image-file-name-regexp’ and it has no contents. 2. Its description consists in a single link of the previous type. When optional argument INCLUDE-LINKED is non-nil, also links with a text description part will be inlined. This can be nice for a quick look at those images, but it does not reflect what exported files will look like. When optional argument REFRESH is non-nil, refresh existing images between BEG and END. This will create new image displays only if necessary. BEG and END default to the buffer boundaries. :PROPERTIES: :CUSTOM_ID: org-capture-goto-last-stored :END: ## org-show-todo-tree (arg) Go to the location where the last capture note was stored. :PROPERTIES: :CUSTOM_ID: org-show-todo-tree :END: ## org-shiftdown (&optional arg) Make a compact tree which shows all headlines marked with TODO. The tree will show the lines where the regexp matches, and all higher headlines above the match. With a ‘C-u’ prefix, prompt for a regexp to match. With a numeric prefix N, construct a sparse tree for the Nth element of ‘org-todo-keywords-1’. :PROPERTIES: :CUSTOM_ID: org-shiftdown :END: • Access: <S-down>, <menu-bar> <Org> <TODO Lists> <Priority Down>, <menu-bar> <Org> <Dates and Scheduling> <Change Date> <1 ... Earlier> • In file: org.el • Find modifications in git logs ## org-agenda-entry-text-mode (&optional arg) Decrease item in timestamp or decrease priority of current headline. Calls ‘org-timestamp-down’ or ‘org-priority-down’, or ‘org-next-item’ depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-mode :END: ## org-find-file-at-mouse (ev) Toggle entry text mode in an agenda buffer. :PROPERTIES: :CUSTOM_ID: org-find-file-at-mouse :END: ## org-table-next-row Open file link or URL at mouse. :PROPERTIES: :CUSTOM_ID: org-table-next-row :END: ## org-goto (&optional alternative-interface) Go to the next row (same column) in the current table. Before doing so, re-align the table if necessary. :PROPERTIES: :CUSTOM_ID: org-goto :END: ## org-agenda-goto-mouse (ev) Look up a different location in the current file, keeping current visibility. When you want look-up or go to a different location in a document, the fastest way is often to fold the entire buffer and then dive into the tree. This method has the disadvantage, that the previous location will be folded, which may not be what you want. This command works around this by showing a copy of the current buffer in an indirect buffer, in overview mode. You can dive into the tree in that copy, use org-occur and incremental search to find a location. When pressing RET or ‘Q’, the command returns to the original buffer in which the visibility is still unchanged. After RET it will also jump to the location selected in the indirect buffer and expose the headline hierarchy above. With a prefix argument, use the alternative interface: e.g., if ‘org-goto-interface’ is ‘outline’ use ‘outline-path-completion’. :PROPERTIES: :CUSTOM_ID: org-agenda-goto-mouse :END: ## org-feed-update-all Go to the Org file which contains the item at the mouse click. :PROPERTIES: :CUSTOM_ID: org-feed-update-all :END: ## org-mouse-transform-to-outline Get inbox items from all feeds in ‘org-feed-alist’. :PROPERTIES: :CUSTOM_ID: org-mouse-transform-to-outline :END: ## org-insert-item (&optional checkbox) :PROPERTIES: :CUSTOM_ID: org-insert-item :END: ## org-id-update-id-locations (&optional files silent) Insert a new item at the current level. If cursor is before first character after bullet of the item, the new item will be created before the current one. If CHECKBOX is non-nil, add a checkbox next to the bullet. Return t when things worked, nil when we are not in an item, or item is invisible. :PROPERTIES: :CUSTOM_ID: org-id-update-id-locations :END: ## org-id-get-create (&optional force) Scan relevant files for IDs. Store the relation between files and corresponding IDs. This will scan all agenda files, all associated archives, and all files currently mentioned in ‘org-id-locations’. When FILES is given, scan these files instead. :PROPERTIES: :CUSTOM_ID: org-id-get-create :END: ## org-tags-view (&optional todo-only match) Create an ID for the current entry and return it. If the entry already has an ID, just return it. With optional argument FORCE, force the creation of a new ID. :PROPERTIES: :CUSTOM_ID: org-tags-view :END: ## org-agenda-diary-entry Show all headlines for all ‘org-agenda-files’ matching a TAGS criterion. The prefix arg TODO-ONLY limits the search to TODO entries. :PROPERTIES: :CUSTOM_ID: org-agenda-diary-entry :END: Make a diary entry, like the ‘i’ command from the calendar. All the standard commands work: block, weekly etc. When ‘org-agenda-diary-file’ points to a file, ‘org-agenda-diary-entry-in-org-file’ is called instead to create entries in that Org file. :PROPERTIES: :CUSTOM_ID: org-insert-link-global :END: ## org-bibtex-create (&optional arg nonew) Insert a link like Org mode does. This command can be called in any mode to insert a link in Org syntax. :PROPERTIES: :CUSTOM_ID: org-bibtex-create :END: ## org-table-create-with-table.el Create a new entry at the given level. With a prefix arg, query for optional fields as well. If nonew is t, add data to the headline of the entry at point. :PROPERTIES: :CUSTOM_ID: org-table-create-with-table.el :END: ## orgtbl-ascii-plot (&optional ask) Use the table.el package to insert a new table. If there is already a table at point, convert between Org tables and table.el tables. :PROPERTIES: :CUSTOM_ID: orgtbl-ascii-plot :END: ## org-copy-visible (beg end) Draw an ASCII bar plot in a column. With cursor in a column containing numerical values, this function will draw a plot in a new column. ASK, if given, is a numeric prefix to override the default 12 characters width of the plot. ASK may also be the ‘C-u’ prefix, which will prompt for the width. :PROPERTIES: :CUSTOM_ID: org-copy-visible :END: ## org-next-item Copy the visible parts of the region. :PROPERTIES: :CUSTOM_ID: org-next-item :END: ## org-toggle-ordered-property Move to the beginning of the next item. Throw an error when not in a list. Also throw an error when at last item, unless ‘org-list-use-circular-motion’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-toggle-ordered-property :END: ## org-babel-remove-result-one-or-many (x) Toggle the ORDERED property of the current entry. For better visibility, you can track the value of this property with a tag. See variable ‘org-track-ordered-property-with-tag’. :PROPERTIES: :CUSTOM_ID: org-babel-remove-result-one-or-many :END: ## org-agenda-toggle-diary Remove the result of the current source block. If called with a prefix argument, remove all result blocks in the buffer. :PROPERTIES: :CUSTOM_ID: org-agenda-toggle-diary :END: ## org-compute-property-at-point Toggle diary inclusion in an agenda buffer. :PROPERTIES: :CUSTOM_ID: org-compute-property-at-point :END: ## org-open-line (n) Compute the property at point. This looks for an enclosing column format, extracts the operator and then applies it to the property in the column format’s scope. :PROPERTIES: :CUSTOM_ID: org-open-line :END: ## org-insert-todo-heading-respect-content (&optional force-state) Insert a new row in tables, call ‘open-line’ elsewhere. If ‘org-special-ctrl-o’ is nil, just call ‘open-line’ everywhere. As a special case, when a document starts with a table, allow to call ‘open-line’ on the very first character. :PROPERTIES: :CUSTOM_ID: org-insert-todo-heading-respect-content :END: ## org-columns-todo (&optional _arg) Insert TODO heading with ‘org-insert-heading-respect-content’ set to t. :PROPERTIES: :CUSTOM_ID: org-columns-todo :END: ## org-plot/goto-nearest-table Change the TODO state during column view. :PROPERTIES: :CUSTOM_ID: org-plot/goto-nearest-table :END: ## org-clock-jump-to-current-clock (&optional effective-clock) Move the point forward to the beginning of nearest table. Return value is the point at the beginning of the table. :PROPERTIES: :CUSTOM_ID: org-clock-jump-to-current-clock :END: ## org-open-at-point (&rest rest) :PROPERTIES: :CUSTOM_ID: org-open-at-point :END: ## org-agenda-sunrise-sunset (arg) :around advice: ‘ad-Advice-org-open-at-point’ Open link, timestamp, footnote or tags at point. When point is on a link, follow it. Normally, files will be opened by an appropriate application. If the optional prefix argument ARG is non-nil, Emacs will visit the file. With a double prefix argument, try to open outside of Emacs, in the application the system uses for this file type. When point is on a timestamp, open the agenda at the day specified. When point is a footnote definition, move to the first reference found. If it is on a reference, move to the associated definition. When point is on a headline, display a list of every link in the entry, so it is possible to pick one, or all, of them. If point is on a tag, call ‘org-tags-view’ instead. When optional argument REFERENCE-BUFFER is non-nil, it should specify a buffer from where the link search should happen. This is used internally by ‘org-open-link-from-string’. On top of syntactically correct links, this function will also try to open links and time-stamps in comments, example blocks... i.e., whenever point is on something looking like a timestamp or a link. (fn &optional ARG REFERENCE-BUFFER) :PROPERTIES: :CUSTOM_ID: org-agenda-sunrise-sunset :END: ## org-remove-file (&optional file) Display sunrise and sunset for the cursor date. Latitude and longitude can be specified with the variables ‘calendar-latitude’ and ‘calendar-longitude’. When called with prefix argument, latitude and longitude will be prompted for. :PROPERTIES: :CUSTOM_ID: org-remove-file :END: ## org-table-fedit-line-up Remove current file from the list of files in variable ‘org-agenda-files’. These are the files which are being checked for agenda entries. Optional argument FILE means use this file instead of the current. :PROPERTIES: :CUSTOM_ID: org-table-fedit-line-up :END: ## org-agenda-bulk-mark-regexp (regexp) Move cursor one line up in the window showing the table. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark-regexp :END: ## org-mouse-move-tree-start (_event) Mark entries matching REGEXP for future agenda bulk action. :PROPERTIES: :CUSTOM_ID: org-mouse-move-tree-start :END: ## org-agenda-goto-today :PROPERTIES: :CUSTOM_ID: org-agenda-goto-today :END: ## org-table-fedit-ref-up Go to today. :PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-up :END: ## org-transpose-element Shift the reference at point one row/hline up. :PROPERTIES: :CUSTOM_ID: org-transpose-element :END: ## org-babel-tangle-jump-to-org Transpose current and previous elements, keeping blank lines between. Point is moved after both elements. :PROPERTIES: :CUSTOM_ID: org-babel-tangle-jump-to-org :END: ## org-narrow-to-subtree Jump from a tangled code file to the related Org mode file. :PROPERTIES: :CUSTOM_ID: org-narrow-to-subtree :END: ## org-agenda-prepare-buffers (files) Narrow buffer to the current subtree. :PROPERTIES: :CUSTOM_ID: org-agenda-prepare-buffers :END: Create buffers for all agenda files, protect archived trees and comments. :PROPERTIES: :CUSTOM_ID: org-toggle-link-display :END: ## org-babel-haskell-export-to-lhs (&optional arg) Toggle the literal or descriptive display of links. :PROPERTIES: :CUSTOM_ID: org-babel-haskell-export-to-lhs :END: ## org-agenda-do-date-earlier (arg) Export to a .lhs file with all haskell code blocks escaped. When called with a prefix argument the resulting .lhs file will be exported to a .tex file. This function will create two new files, base-name.lhs and base-name.tex where base-name is the name of the current Org file. Note that all standard Babel literate programming constructs (header arguments, no-web syntax etc...) are ignored. :PROPERTIES: :CUSTOM_ID: org-agenda-do-date-earlier :END: ## org-toggle-timestamp-type :PROPERTIES: :CUSTOM_ID: org-toggle-timestamp-type :END: ## org-table-toggle-formula-debugger Toggle the type ( or [inactive]) of a time stamp. :PROPERTIES: :CUSTOM_ID: org-table-toggle-formula-debugger :END: ## org-bibtex-read Toggle the formula debugger in tables. :PROPERTIES: :CUSTOM_ID: org-bibtex-read :END: ## org-match-sparse-tree (&optional todo-only match) Read a bibtex entry and save to ‘org-bibtex-entries’. This uses ‘bibtex-parse-entry’. :PROPERTIES: :CUSTOM_ID: org-match-sparse-tree :END: ## org-show-priority Create a sparse tree according to tags string MATCH. MATCH is a string with match syntax. It can contain a selection of tags ("+work+urgent-boss"), properties ("LEVEL>3"), and TODO keywords ("TODO=\"WAITING\"") or a combination of those. See the manual for details. If optional argument TODO-ONLY is non-nil, only select lines that are also TODO tasks. :PROPERTIES: :CUSTOM_ID: org-show-priority :END: ## org-agenda-previous-line Show the priority of the current item. This priority is composed of the main priority given with the [#A] cookies, and by additional input from the age of a schedules or deadline entry. :PROPERTIES: :CUSTOM_ID: org-agenda-previous-line :END: ## org-agenda-reset-view Move cursor to the previous line, and show if follow-mode is active. :PROPERTIES: :CUSTOM_ID: org-agenda-reset-view :END: ## org-table-sum (&optional beg end nlast) Switch to default view for agenda. :PROPERTIES: :CUSTOM_ID: org-table-sum :END: ## org-koma-letter-export-as-latex (&optional async subtreep visible-only body-only ext-plist) Sum numbers in region of current table column. The result will be displayed in the echo area, and will be available as kill to be inserted with . If there is an active region, it is interpreted as a rectangle and all numbers in that rectangle will be summed. If there is no active region and point is located in a table column, sum all numbers in that column. If at least one number looks like a time HH:MM or HH:MM:SS, all other numbers are assumed to be times as well (in decimal hours) and the numbers are added as such. If NLAST is a number, only the NLAST fields will actually be summed. :PROPERTIES: :CUSTOM_ID: org-koma-letter-export-as-latex :END: ## org-babel-lilypond-toggle-pdf-display Export current buffer as a KOMA Scrlttr2 letter. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting buffer should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{letter}" and "\end{letter}". EXT-PLIST, when provided, is a proeprty list with external parameters overriding Org default settings, but still inferior to file-local settings. Export is done in a buffer named "*Org KOMA-LETTER Export*". It will be displayed if ‘org-export-show-temporary-export-buffer’ is non-nil. :PROPERTIES: :CUSTOM_ID: org-babel-lilypond-toggle-pdf-display :END: ## org-babel-execute-subtree (&optional arg) Toggle whether pdf will be displayed following a successful compilation. :PROPERTIES: :CUSTOM_ID: org-babel-execute-subtree :END: ## org-attach-attach-cp Execute source code blocks in a subtree. Call ‘org-babel-execute-src-block’ on every source block in the current subtree. :PROPERTIES: :CUSTOM_ID: org-attach-attach-cp :END: ## org-export-stack-mode Attach a file by copying it. :PROPERTIES: :CUSTOM_ID: org-export-stack-mode :END: ## org-insert-heading-respect-content (&optional invisible-ok) Mode for displaying asynchronous export stack. Type ‘M-x org-export-stack’ to visualize the asynchronous export stack. In an Org Export Stack buffer, use ‘RET’ to view export output on current line, ‘d’ to remove it from the stack and ‘C’ to clear stack completely. Removing entries in a stack buffer does not affect files or buffers, only display. key binding --- ------- TAB forward-button RET org-export-stack-view C-n next-line C-p previous-line ESC Prefix Command SPC next-line - negative-argument 0 .. 9 digit-argument < beginning-of-buffer > end-of-buffer ? describe-mode C org-export-stack-clear S tabulated-list-sort d org-export-stack-remove g revert-buffer h describe-mode n next-line p previous-line q quit-window v org-export-stack-view DEL previous-line S-SPC scroll-down-command backward-button next-line mouse-face mouse-select-window Prefix Command previous-line C-M-i backward-button In addition to any hooks its parent mode ‘tabulated-list-mode’ might have run, this mode runs the hook ‘org-export-stack-mode-hook’, as the final or penultimate step during initialization. :PROPERTIES: :CUSTOM_ID: org-insert-heading-respect-content :END: ## org-agenda-list-stuck-projects (&rest ignore) Insert heading with ‘org-insert-heading-respect-content’ set to t. :PROPERTIES: :CUSTOM_ID: org-agenda-list-stuck-projects :END: ## org-cdlatex-math-modify (&optional _arg) Create agenda view for projects that are stuck. Stuck projects are project that have no next actions. For the definitions of what a project is and how to check if it stuck, customize the variable ‘org-stuck-projects’. :PROPERTIES: :CUSTOM_ID: org-cdlatex-math-modify :END: ## org-create-customize-menu Execute ‘cdlatex-math-modify’ in LaTeX fragments. Revert to the normal definition outside of these fragments. :PROPERTIES: :CUSTOM_ID: org-create-customize-menu :END: ## org-table-create (&optional size) Create a full customization menu for Org mode, insert it into the menu. :PROPERTIES: :CUSTOM_ID: org-table-create :END: ## org-html-convert-region-to-html Query for a size and insert a table skeleton. SIZE is a string Columns x Rows like for example "3x2". :PROPERTIES: :CUSTOM_ID: org-html-convert-region-to-html :END: ## org-attach-attach-ln Assume the current region has Org syntax, and convert it to HTML. This can be used in any buffer. For example, you can write an itemized list in Org syntax in an HTML buffer and use this command to convert it. :PROPERTIES: :CUSTOM_ID: org-attach-attach-ln :END: ## org-html-htmlize-generate-css Attach a file by creating a hard link to it. Beware that this does not work on systems that do not support hard links. On some systems, this apparently does copy the file instead. :PROPERTIES: :CUSTOM_ID: org-html-htmlize-generate-css :END: ## org-check-after-date (d) Create the CSS for all font definitions in the current Emacs session. Use this to create face definitions in your CSS style file that can then be used by code snippets transformed by htmlize. This command just produces a buffer that contains class definitions for all faces used in the current Emacs session. You can copy and paste the ones you need into your CSS file. If you then set ‘org-html-htmlize-output-type’ to ‘css’, calls to the function ‘org-html-htmlize-region-for-paste’ will produce code that uses these same face definitions. :PROPERTIES: :CUSTOM_ID: org-check-after-date :END: ## org-toggle-comment Check if there are deadlines or scheduled entries after date D. :PROPERTIES: :CUSTOM_ID: org-toggle-comment :END: ## org-attach-attach-mv Change the COMMENT state of an entry. :PROPERTIES: :CUSTOM_ID: org-attach-attach-mv :END: ## org-remove-inline-images Attach a file by moving (renaming) it. :PROPERTIES: :CUSTOM_ID: org-remove-inline-images :END: ## org-return-indent Remove inline display of images. :PROPERTIES: :CUSTOM_ID: org-return-indent :END: ## org-delete-property-globally (property) Goto next table row or insert a newline and indent. Calls ‘org-table-next-row’ or ‘newline-and-indent’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-delete-property-globally :END: ## org-table-fedit-scroll (N) Remove PROPERTY globally, from all entries. This function ignores narrowing, if any. :PROPERTIES: :CUSTOM_ID: org-table-fedit-scroll :END: ## org-unindent-buffer :PROPERTIES: :CUSTOM_ID: org-unindent-buffer :END: ## orgtbl-ctrl-c-ctrl-c (arg) Un-indent the visible part of the buffer. Relative indentation (between items, inside blocks, etc.) isn’t modified. :PROPERTIES: :CUSTOM_ID: orgtbl-ctrl-c-ctrl-c :END: ## org-insert-subheading (arg) If the cursor is inside a table, realign the table. If it is a table to be sent away to a receiver, do it. With prefix arg, also recompute table. :PROPERTIES: :CUSTOM_ID: org-insert-subheading :END: ## org-agenda-earlier (arg) Insert a new subheading and demote it. Works for outline headings and for plain lists alike. :PROPERTIES: :CUSTOM_ID: org-agenda-earlier :END: ## org-attach-delete-one (&optional file) Go backward in time by the current span. With prefix ARG, go backward that many times the current span. :PROPERTIES: :CUSTOM_ID: org-attach-delete-one :END: ## org-columns-content Delete a single attachment. :PROPERTIES: :CUSTOM_ID: org-columns-content :END: ## org-attach-attach-lns Switch to contents view while in columns view. :PROPERTIES: :CUSTOM_ID: org-attach-attach-lns :END: ## org-agenda-manipulate-query-add Attach a file by creating a symbolic link to it. Beware that this does not work on systems that do not support symbolic links. On some systems, this apparently does copy the file instead. :PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-add :END: ## org-beginning-of-line (&optional n) Manipulate the query by adding a search term with positive selection. Positive selection means the term must be matched for selection of an entry. :PROPERTIES: :CUSTOM_ID: org-beginning-of-line :END: ## org-agenda-deadline (arg &optional time) Go to the beginning of the current visible line. If this is a headline, and ‘org-special-ctrl-a/e’ is set, ignore tags on the first attempt, and only move to after the tags when the cursor is already beyond the end of the headline. With argument N not nil or 1, move forward N - 1 lines first. :PROPERTIES: :CUSTOM_ID: org-agenda-deadline :END: ## org-agenda-priority (&optional force-direction) Schedule the item at point. ARG is passed through to ‘org-deadline’. :PROPERTIES: :CUSTOM_ID: org-agenda-priority :END: ## org-ascii-export-to-ascii (&optional async subtreep visible-only body-only ext-plist) Set the priority of line at point, also in Org file. This changes the line at point, all other lines in the agenda referring to the same tree node, and the headline of the tree node in the Org file. Called with a universal prefix arg, show the priority instead of setting it. :PROPERTIES: :CUSTOM_ID: org-ascii-export-to-ascii :END: ## org-fill-paragraph (&optional justify region) Export current buffer to a text file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, strip title and table of contents from output. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-fill-paragraph :END: ## org-publish-current-project (&optional force async) Fill element at point, when applicable. This function only applies to comment blocks, comments, example blocks and paragraphs. Also, as a special case, re-align table when point is at one. For convenience, when point is at a plain list, an item or a footnote definition, try to fill the first paragraph within. If JUSTIFY is non-nil (interactively, with prefix argument), justify as well. If ‘sentence-end-double-space’ is non-nil, then period followed by one space does not end a sentence, so don’t break a line there. The variable ‘fill-column’ controls the width for filling. The REGION argument is non-nil if called interactively; in that case, if Transient Mark mode is enabled and the mark is active, fill each of the elements in the active region, instead of just filling the current element. :PROPERTIES: :CUSTOM_ID: org-publish-current-project :END: ## org-remove-occur-highlights (&optional _beg _end noremove) Publish the project associated with the current file. With a prefix argument, force publishing of all files in the project. :PROPERTIES: :CUSTOM_ID: org-remove-occur-highlights :END: ## org-agenda-next-item (n) Remove the occur highlights from the buffer. BEG and END are ignored. If NOREMOVE is nil, remove this function from the ‘before-change-functions’ in the current buffer. :PROPERTIES: :CUSTOM_ID: org-agenda-next-item :END: ## org-previous-visible-heading (arg) Move cursor to next agenda item. :PROPERTIES: :CUSTOM_ID: org-previous-visible-heading :END: ## org-babel-check-src-block Move to the previous visible heading. This function wraps ‘outline-previous-visible-heading’ with ‘org-with-limited-levels’ in order to skip over inline tasks and respect customization of ‘org-odd-levels-only’. :PROPERTIES: :CUSTOM_ID: org-babel-check-src-block :END: ## org-increase-number-at-point (&optional inc) Check for misspelled header arguments in the current code block. :PROPERTIES: :CUSTOM_ID: org-increase-number-at-point :END: ## org-end-of-line (&optional n) Increment the number at point. With an optional prefix numeric argument INC, increment using this numeric value. :PROPERTIES: :CUSTOM_ID: org-end-of-line :END: ## org-attach-set-directory Go to the end of the line, but before ellipsis, if any. If this is a headline, and ‘org-special-ctrl-a/e’ is set, ignore tags on the first attempt, and only move to after the tags when the cursor is already beyond the end of the headline. With argument N not nil or 1, move forward N - 1 lines first. :PROPERTIES: :CUSTOM_ID: org-attach-set-directory :END: ## org-table-fedit-scroll-down (N) Set the ATTACH_DIR property of the current entry. The property defines the directory that is used for attachments of the entry. :PROPERTIES: :CUSTOM_ID: org-table-fedit-scroll-down :END: ## orgtbl-error :PROPERTIES: :CUSTOM_ID: orgtbl-error :END: ## org-shifttab (&optional arg) Error when there is no default binding for a table key. :PROPERTIES: :CUSTOM_ID: org-shifttab :END: • Access: <backtab>, <S-tab>, <S-iso-lefttab>, <menu-bar> <Tbl> <Previous Field>, <menu-bar> <Org> <Show/Hide> <Cycle Global Visibility> • In file: org.el • Find modifications in git logs ## org-man-export-to-man (&optional async subtreep visible-only body-only ext-plist) Global visibility cycling or move to previous table field. Call ‘org-table-previous-field’ within a table. When ARG is nil, cycle globally through visibility states. When ARG is a numeric prefix, show contents of this level. :PROPERTIES: :CUSTOM_ID: org-man-export-to-man :END: ## org-capture-refile Export current buffer to a Man file. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only the body without any markers. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-capture-refile :END: ## org-decrypt-entry Finalize the current capture and then refile the entry. Refiling is done from the base buffer, because the indirect buffer is then already gone. Any prefix argument will be passed to the refile command. :PROPERTIES: :CUSTOM_ID: org-decrypt-entry :END: ## org-set-tags-command (&optional arg just-align) Decrypt the content of the current headline. :PROPERTIES: :CUSTOM_ID: org-set-tags-command :END: ## org-edit-agenda-file-list Call the set-tags command for the current entry. :PROPERTIES: :CUSTOM_ID: org-edit-agenda-file-list :END: ## org-babel-load-in-session (&optional _arg info) Edit the list of agenda files. Depending on setup, this either uses customize to edit the variable ‘org-agenda-files’, or it visits the file that is holding the list. In the latter case, the buffer is set up in a way that saving it automatically kills the buffer and restores the previous window configuration. :PROPERTIES: :CUSTOM_ID: org-babel-load-in-session :END: ## org-clock-menu Load the body of the current source-code block. Evaluate the header arguments for the source block before entering the session. After loading the body this pops open the session. :PROPERTIES: :CUSTOM_ID: org-clock-menu :END: ## org-columns-edit-attributes :PROPERTIES: :CUSTOM_ID: org-columns-edit-attributes :END: ## org-export-stack-clear Edit the attributes of the current column. :PROPERTIES: :CUSTOM_ID: org-export-stack-clear :END: ## org-revert-all-org-buffers Remove all entries from export stack. :PROPERTIES: :CUSTOM_ID: org-revert-all-org-buffers :END: ## org-table-move-row (&optional up) Revert all Org buffers. Prompt for confirmation when there are unsaved changes. Be sure you know what you are doing before letting this function overwrite your changes. This function is useful in a setup where one tracks org files with a version control system, to revert on one machine after pulling changes from another. I believe the procedure must be like this: 1. M-x org-save-all-org-buffers 2. Pull changes from the other machine, resolve conflicts 3. M-x org-revert-all-org-buffers :PROPERTIES: :CUSTOM_ID: org-table-move-row :END: ## org-id-copy Move the current table line down. With arg UP, move it up. :PROPERTIES: :CUSTOM_ID: org-id-copy :END: ## org-table-cut-region (beg end) Copy the ID of the entry at point to the kill ring. Create an ID if necessary. :PROPERTIES: :CUSTOM_ID: org-table-cut-region :END: ## org-calendar-goto-agenda Copy region in table to the clipboard and blank all relevant fields. If there is no active region, use just the field at point. :PROPERTIES: :CUSTOM_ID: org-calendar-goto-agenda :END: ## org-capture-finalize (&optional stay-with-capture) Compute the Org agenda for the calendar date displayed at the cursor. This is a command that has to be installed in ‘calendar-mode-map’. :PROPERTIES: :CUSTOM_ID: org-capture-finalize :END: ## org-ctags-open-file (name &optional title) Finalize the capture process. With prefix argument STAY-WITH-CAPTURE, jump to the location of the captured item after finalizing. :PROPERTIES: :CUSTOM_ID: org-ctags-open-file :END: ## org-refile-goto-last-stored Visit or create a file called ‘NAME.org’, and insert a new topic. The new topic will be titled NAME (or TITLE if supplied). :PROPERTIES: :CUSTOM_ID: org-refile-goto-last-stored :END: ## org-force-cycle-archived Go to the location where the last refile was stored. :PROPERTIES: :CUSTOM_ID: org-force-cycle-archived :END: ## org-table-field-info (_arg) Cycle subtree even if it is archived. :PROPERTIES: :CUSTOM_ID: org-table-field-info :END: ## org-setup-comments-handling Show info about the current field, and highlight any reference at point. :PROPERTIES: :CUSTOM_ID: org-setup-comments-handling :END: ## org-priority-up :PROPERTIES: :CUSTOM_ID: org-priority-up :END: ## org-copy-subtree (&optional n cut force-store-markers nosubtrees) Increase the priority of the current item. :PROPERTIES: :CUSTOM_ID: org-copy-subtree :END: ## org-caldav-delete-everything (prefix) Copy the current subtree it in the clipboard. With prefix arg N, copy this many sequential subtrees. This is a short-hand for marking the subtree and then copying it. If CUT is non-nil, actually cut the subtree. If FORCE-STORE-MARKERS is non-nil, store the relative locations of some markers in the region, even if CUT is non-nil. This is useful if the caller implements cut-and-paste as copy-then-paste-then-cut. :PROPERTIES: :CUSTOM_ID: org-caldav-delete-everything :END: ## org-forward-element Delete all events from Calendar and removes state file. Again: This deletes all events in your calendar. So only do this if you’re really sure. This has to be called with a prefix, just so you don’t do it by accident. :PROPERTIES: :CUSTOM_ID: org-forward-element :END: ## org-open-at-point-global Move forward by one element. Move to the next element at the same level, when possible. :PROPERTIES: :CUSTOM_ID: org-open-at-point-global :END: ## org-unescape-code-in-region (beg end) Follow a link or time-stamp like Org mode does. This command can be called in any mode to follow an external link or a time-stamp that has Org mode syntax. Its behavior is undefined when called on internal links (e.g., fuzzy links). Raise an error when there is nothing to follow. :PROPERTIES: :CUSTOM_ID: org-unescape-code-in-region :END: ## org-agenda-menu (event) Un-escape lines between BEG and END. Un-escaping happens by removing the first comma on lines starting with ",*", ",#+", ",,*" and ",,#+". :PROPERTIES: :CUSTOM_ID: org-agenda-menu :END: ## org-cycle-agenda-files Agenda menu :PROPERTIES: :CUSTOM_ID: org-cycle-agenda-files :END: ## org-move-item-up Cycle through the files in ‘org-agenda-files’. If the current buffer visits an agenda file, find the next one in the list. If the current buffer does not, find the first agenda file. :PROPERTIES: :CUSTOM_ID: org-move-item-up :END: ## org-babel-load-in-session-maybe Move the item at point up, i.e. swap with previous item. Sub-items (items with larger indentation) are considered part of the item, so this really moves item trees. :PROPERTIES: :CUSTOM_ID: org-babel-load-in-session-maybe :END: ## org-entities-create-table Conditionally load a source block in a session. Detect if this is context for a org-babel src-block and if so then run ‘org-babel-load-in-session’. :PROPERTIES: :CUSTOM_ID: org-entities-create-table :END: ## org-toggle-sticky-agenda (&optional arg) Create an Org mode table with all entities. :PROPERTIES: :CUSTOM_ID: org-toggle-sticky-agenda :END: ## org-insert-columns-dblock Toggle ‘org-agenda-sticky’. :PROPERTIES: :CUSTOM_ID: org-insert-columns-dblock :END: ## org-man-export-to-pdf (&optional async subtreep visible-only body-only ext-plist) Create a dynamic block capturing a column view table. :PROPERTIES: :CUSTOM_ID: org-man-export-to-pdf :END: ## org-calendar-select-mouse (ev) Export current buffer to Groff then process through to PDF. If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write between markers. EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return PDF file’s name. :PROPERTIES: :CUSTOM_ID: org-calendar-select-mouse :END: ## org-babel-previous-src-block (&optional arg) Return to ‘org-read-date’ with the date currently selected. This is used by ‘org-read-date’ in a temporary keymap for the calendar buffer. :PROPERTIES: :CUSTOM_ID: org-babel-previous-src-block :END: ## org-edit-headline (&optional heading) Jump to the previous source block. With optional prefix argument ARG, jump backward ARG many source blocks. :PROPERTIES: :CUSTOM_ID: org-edit-headline :END: ## org-indent-region (start end) Edit the current headline. Set it to HEADING when provided. :PROPERTIES: :CUSTOM_ID: org-indent-region :END: ## org-paste-special (arg) Indent each non-blank line in the region. Called from a program, START and END specify the region to indent. The function will not indent contents of example blocks, verse blocks and export blocks as leading white spaces are assumed to be significant there. :PROPERTIES: :CUSTOM_ID: org-paste-special :END: ## org-toggle-fixed-width Paste rectangular region into table, or past subtree relative to level. Calls ‘org-table-paste-rectangle’ or ‘org-paste-subtree’, depending on context. See the individual commands for more information. :PROPERTIES: :CUSTOM_ID: org-toggle-fixed-width :END: ## org-columns-show-value Toggle fixed-width markup. Add or remove fixed-width markup on current line, whenever it makes sense. Return an error otherwise. If a region is active and if it contains only fixed-width areas or blank lines, remove all fixed-width markup in it. If the region contains anything else, convert all non-fixed-width lines to fixed-width ones. Blank lines at the end of the region are ignored unless the region only contains such lines. :PROPERTIES: :CUSTOM_ID: org-columns-show-value :END: ## org-metaright (&optional _arg) Show the full value of the property. :PROPERTIES: :CUSTOM_ID: org-metaright :END: ## org-mouse-insert-heading Demote heading, list item at point or move table column right. In front of a drawer or a block keyword, indent it correctly. Calls ‘org-do-demote’, ‘org-indent-item’, ‘org-table-move-column’, ‘org-indent-drawer’ or ‘org-indent-block’ depending on context. With no specific context, calls the Emacs default ‘forward-word’. See the individual commands for more information. This function runs the hook ‘org-metaright-hook’ as a first step, and returns at first non-nil value. :PROPERTIES: :CUSTOM_ID: org-mouse-insert-heading :END: ## org-table-eval-formula (&optional arg equation suppress-align suppress-const suppress-store suppress-analysis) Insert a new heading, as ‘org-insert-heading’. If the point is at the :beginning (‘org-mouse-line-position’) of the line, insert the new heading before the current line. Otherwise, insert it after the current heading. :PROPERTIES: :CUSTOM_ID: org-table-eval-formula :END: ## org-babel-remove-inline-result (&optional datum) Replace the table field value at the cursor by the result of a calculation. In a table, this command replaces the value in the current field with the result of a formula. It also installs the formula as the "current" column formula, by storing it in a special line below the table. When called with a ‘C-u’ prefix the formula is installed as a field formula. When called with a ‘C-u C-u’ prefix, insert the active equation for the field back into the current field, so that it can be edited there. This is useful in order to use ‘C-c ?’ to check the referenced fields. When called, the command first prompts for a formula, which is read in the minibuffer. Previously entered formulas are available through the history list, and the last used formula is offered as a default. These stored formulas are adapted correctly when moving, inserting, or deleting columns with the corresponding commands. The formula can be any algebraic expression understood by the Calc package. For details, see the Org mode manual. This function can also be called from Lisp programs and offers additional arguments: EQUATION can be the formula to apply. If this argument is given, the user will not be prompted. SUPPRESS-ALIGN is used to speed-up recursive calls by by-passing unnecessary aligns. SUPPRESS-CONST suppresses the interpretation of constants in the formula, assuming that this has been done already outside the function. SUPPRESS-STORE means the formula should not be stored, either because it is already stored, or because it is a modified equation that should not overwrite the stored one. SUPPRESS-ANALYSIS prevents analyzing the table and checking location of point. :PROPERTIES: :CUSTOM_ID: org-babel-remove-inline-result :END: ## org-babel-tangle-clean Remove the result of the current inline-src-block or babel call. The result must be wrapped in a ‘results’ macro to be removed. Leading white space is trimmed. :PROPERTIES: :CUSTOM_ID: org-babel-tangle-clean :END: ## org-table-copy-region (beg end &optional cut) Remove comments inserted by ‘org-babel-tangle’. Call this function inside of a source-code file generated by ‘org-babel-tangle’ to remove all comments inserted automatically by ‘org-babel-tangle’. Warning, this comment removes any lines containing constructs which resemble Org file links or noweb references. :PROPERTIES: :CUSTOM_ID: org-table-copy-region :END: ## org-set-effort (&optional value increment) Copy rectangular region in table to clipboard. A special clipboard is used which can only be accessed with ‘org-table-paste-rectangle’. :PROPERTIES: :CUSTOM_ID: org-set-effort :END: ## org-edit-table.el Set the effort property of the current entry. With numerical prefix arg, use the nth allowed value, 0 stands for the 10th allowed value. When INCREMENT is non-nil, set the property to the next allowed value. :PROPERTIES: :CUSTOM_ID: org-edit-table.el :END: ## org-forward-heading-same-level (arg &optional invisible-ok) Edit "table.el" table at point. A new buffer is created and the table is copied into it. Then the table is recognized with ‘table-recognize’. When done editing, exit with ‘C-c '’. The edited text will then replace the area in the Org mode buffer. Throw an error when not at such a table. :PROPERTIES: :CUSTOM_ID: org-forward-heading-same-level :END: ## org-lint--report-mode Move forward to the ARG’th subheading at same level as this one. Stop at the first and last subheadings of a superior heading. Normally this only looks at visible headings, but when INVISIBLE-OK is non-nil it will also look at invisible ones. :PROPERTIES: :CUSTOM_ID: org-lint--report-mode :END: ## org-mode-restart Major mode used to display reports emitted during linting. key binding --- ------- TAB .. C-j org-lint--show-source RET org-lint--jump-to-source ESC Prefix Command SPC scroll-up-command - negative-argument 0 .. 9 digit-argument < beginning-of-buffer > end-of-buffer ? describe-mode S tabulated-list-sort g revert-buffer h org-lint--hide-checker i org-lint--ignore-checker n next-line p previous-line q quit-window DEL scroll-down-command S-SPC scroll-down-command backward-button mouse-face mouse-select-window Prefix Command C-M-i backward-button In addition to any hooks its parent mode ‘tabulated-list-mode’ might have run, this mode runs the hook ‘org-lint--report-mode-hook’, as the final or penultimate step during initialization. :PROPERTIES: :CUSTOM_ID: org-mode-restart :END: ## org-agenda (&optional arg org-keys restriction) :PROPERTIES: :CUSTOM_ID: org-agenda :END: ## org-save-all-org-buffers Dispatch agenda commands to collect entries to the agenda buffer. Prompts for a command to execute. Any prefix arg will be passed on to the selected command. The default selections are: a Call ‘org-agenda-list’ to display the agenda for current day or week. t Call ‘org-todo-list’ to display the global todo list. T Call ‘org-todo-list’ to display the global todo list, select only entries with a specific TODO keyword (the user gets a prompt). m Call ‘org-tags-view’ to display headlines with tags matching a condition (the user is prompted for the condition). M Like ‘m’, but select only TODO entries, no ordinary headlines. e Export views to associated files. s Search entries for keywords. S Search entries for keywords, only with TODO keywords. / Multi occur across all agenda files and also files listed in ‘org-agenda-text-search-extra-files’. < Restrict agenda commands to buffer, subtree, or region. Press several times to get the desired effect. > Remove a previous restriction. # List "stuck" projects. ! Configure what "stuck" means. C Configure custom agenda commands. More commands can be added by configuring the variable ‘org-agenda-custom-commands’. In particular, specific tags and TODO keyword searches can be pre-defined in this way. If the current buffer is in Org mode and visiting a file, you can also first press ‘<’ once to indicate that the agenda should be temporarily (until the next use of ‘C-c a’) restricted to the current file. Pressing ‘<’ twice means to restrict to the current subtree or region (if active). :PROPERTIES: :CUSTOM_ID: org-save-all-org-buffers :END: ## org-agenda-forward-block (&optional backward) Save all Org buffers without user confirmation. :PROPERTIES: :CUSTOM_ID: org-agenda-forward-block :END: ## org-export-stack-refresh Move forward by one agenda block. When optional argument BACKWARD is set, go backward :PROPERTIES: :CUSTOM_ID: org-export-stack-refresh :END: ## orgstruct++-mode (&optional arg) Refresh the export stack. :PROPERTIES: :CUSTOM_ID: orgstruct++-mode :END: ## org-mobile-create-sumo-agenda Toggle ‘orgstruct-mode’, the enhanced version of it. In addition to setting orgstruct-mode, this also exports all indentation and autofilling variables from Org mode into the buffer. It will also recognize item context in multiline items. :PROPERTIES: :CUSTOM_ID: org-mobile-create-sumo-agenda :END: ## org-mouse-down-mouse (event) Create a file that contains all custom agenda views. :PROPERTIES: :CUSTOM_ID: org-mouse-down-mouse :END: ## org-move-subtree-down (&optional arg) :PROPERTIES: :CUSTOM_ID: org-move-subtree-down :END: ## org-update-radio-target-regexp Move the current subtree down past ARG headlines of the same level. :PROPERTIES: :CUSTOM_ID: org-update-radio-target-regexp :END: ## org-backward-heading-same-level (arg &optional invisible-ok) Find all radio targets in this file and update the regular expression. Also refresh fontification if needed. :PROPERTIES: :CUSTOM_ID: org-backward-heading-same-level :END: ## org-capture-goto-target (&optional template-key) Move backward to the ARG’th subheading at same level as this one. Stop at the first and last subheadings of a superior heading. :PROPERTIES: :CUSTOM_ID: org-capture-goto-target :END: ## org-table-recalculate (&optional all noalign) Go to the target location of a capture template. The user is queried for the template. :PROPERTIES: :CUSTOM_ID: org-table-recalculate :END: ## org-ctags-get-filename-for-tag (tag) Recalculate the current table line by applying all stored formulas. With prefix arg ALL, do this for all lines in the table. When called with a ‘C-u C-u’ prefix, or if ALL is the symbol ‘iterate’, recompute the table until it no longer changes. If NOALIGN is not nil, do not re-align the table after the computations are done. This is typically used internally to save time, if it is known that the table will be realigned a little later anyway. :PROPERTIES: :CUSTOM_ID: org-ctags-get-filename-for-tag :END: ## org-table-align TAG is a string. Search the active TAGS file for a matching tag. If the tag is found, return a list containing the filename, line number, and buffer position where the tag is found. :PROPERTIES: :CUSTOM_ID: org-table-align :END: ## org-clock-timestamps-down (&optional n) Align the table at point by aligning all vertical bars. :PROPERTIES: :CUSTOM_ID: org-clock-timestamps-down :END: ## org-agenda-clock-cancel (&optional arg) Increase CLOCK timestamps at cursor. Optional argument N tells to change by that many units. :PROPERTIES: :CUSTOM_ID: org-agenda-clock-cancel :END: Cancel the currently running clock. :PROPERTIES: :CUSTOM_ID: org-open-link-from-string :END: ## org-change-tag-in-region (beg end tag off) Open a link in the string S, as if it was in Org mode. :PROPERTIES: :CUSTOM_ID: org-change-tag-in-region :END: ## org-export-insert-default-template (&optional backend subtreep) Add or remove TAG for each entry in the region. This works in the agenda, and also in an Org buffer. :PROPERTIES: :CUSTOM_ID: org-export-insert-default-template :END: ## org-delete-property (property) Insert all export keywords with default values at beginning of line. BACKEND is a symbol referring to the name of a registered export back-end, for which specific export options should be added to the template, or ‘default’ for default template. When it is nil, the user will be prompted for a category. If SUBTREEP is non-nil, export configuration will be set up locally for the subtree through node properties. :PROPERTIES: :CUSTOM_ID: org-delete-property :END: ## org-require-autoloaded-modules In the current entry, delete PROPERTY. :PROPERTIES: :CUSTOM_ID: org-require-autoloaded-modules :END: ## org-table-fedit-toggle-ref-type :PROPERTIES: :CUSTOM_ID: org-table-fedit-toggle-ref-type :END: ## org-agenda-todo (&optional arg) Convert all references in the buffer from B3 to @32 and back.

:PROPERTIES: :CUSTOM_ID: org-agenda-todo :END:

## org-table-hline-and-move (&optional same-column)

Cycle TODO state of line at point, also in Org file.
This changes the line at point, all other lines in the agenda referring to
the same tree node, and the headline of the tree node in the Org file.

:PROPERTIES: :CUSTOM_ID: org-table-hline-and-move :END:

## org-babel-switch-to-session-with-code (&optional arg _info)

Insert a hline and move to the row below that line.

:PROPERTIES: :CUSTOM_ID: org-babel-switch-to-session-with-code :END:

## org-table-insert-column

Switch to code buffer and display session.

:PROPERTIES: :CUSTOM_ID: org-table-insert-column :END:

## org-archive-subtree-default

Insert a new column into the table.

:PROPERTIES: :CUSTOM_ID: org-archive-subtree-default :END:

## org-id-goto (id)

Archive the current subtree with the default command.
This command is set with the variable ‘org-archive-default-command’.

:PROPERTIES: :CUSTOM_ID: org-id-goto :END:

## org-capture-import-remember-templates

Switch to the buffer containing the entry with id ID.
Move the cursor to that entry in that buffer.

:PROPERTIES: :CUSTOM_ID: org-capture-import-remember-templates :END:

## org-columns-new (&optional spec &rest attributes)

Set ‘org-capture-templates’ to be similar to ‘org-remember-templates’.

:PROPERTIES: :CUSTOM_ID: org-columns-new :END:

## org-edit-inline-src-code

Insert a new column, to the left of the current column.
Interactively fill attributes for new column.  When column format
specification SPEC is provided, edit it instead.

When optional argument attributes can be a list of columns
specifications attributes to create the new column
non-interactively.  See ‘org-columns-compile-format’ for
details.

:PROPERTIES: :CUSTOM_ID: org-edit-inline-src-code :END:

## org-list-send-list (&optional maybe)

Edit inline source code at point.

:PROPERTIES: :CUSTOM_ID: org-list-send-list :END:

Send a transformed version of this list to the receiver position.
With argument MAYBE, fail quietly if no transformation is defined
for this list.

## org-babel-mark-block

:PROPERTIES: :CUSTOM_ID: org-babel-mark-block :END:

## org-babel-describe-bindings

Mark current src block.

:PROPERTIES: :CUSTOM_ID: org-babel-describe-bindings :END:

## org-forward-sentence (&optional _arg)

Describe all keybindings behind ‘org-babel-key-prefix’.

:PROPERTIES: :CUSTOM_ID: org-forward-sentence :END:

## org-table-follow-field-mode (&optional arg)

Go to end of sentence, or end of table field.
This will call ‘forward-sentence’ or ‘org-table-end-of-field’,
depending on context.

:PROPERTIES: :CUSTOM_ID: org-table-follow-field-mode :END:

## org-mark-ring-goto (&optional n)

Minor mode to make the table field editor window follow the cursor.
When this mode is active, the field editor window will always show the
current field.  The mode exits automatically when the cursor leaves the
table (but see ‘org-table-exit-follow-field-mode-when-leaving-table’).

:PROPERTIES: :CUSTOM_ID: org-mark-ring-goto :END:

## org-table-iterate (&optional arg)

With prefix arg N, jump back that many stored positions.  When
called several times in succession, walk through the entire ring.
Org mode commands jumping to a different position in the current file,
or to another Org file, automatically push the old position onto the ring.

:PROPERTIES: :CUSTOM_ID: org-table-iterate :END:

## org-agenda-week-view (&optional iso-week)

Recalculate the table until it does not change anymore.
The maximum number of iterations is 10, but you can choose a different value
with the prefix ARG.

:PROPERTIES: :CUSTOM_ID: org-agenda-week-view :END:

Switch to weekly view for agenda.
With argument ISO-WEEK, switch to the corresponding ISO week.
If ISO-WEEK has more then 2 digits, only the last two encode
the week.  Any digits before this encode a year.  So 200712
means week 12 of year 2007.  Years ranging from 70 years ago
to 30 years in the future can also be written as 2-digit years.

## org-priority (&optional action _show)

With one universal prefix argument, remove any deadline from the item.
With two universal prefix arguments, prompt for a warning delay.
With argument TIME, set the deadline at the corresponding date.  TIME
can either be an Org date like "2011-07-24" or a delta like "+2d".

:PROPERTIES: :CUSTOM_ID: org-priority :END:

## org-agenda-file-to-front (&optional to-end)

Change the priority of an item.
ACTION can be ‘set’, ‘up’, ‘down’, or a character.

:PROPERTIES: :CUSTOM_ID: org-agenda-file-to-front :END:

## org-babel-expand-src-block-maybe

Move/add the current file to the top of the agenda file list.
If the file is not present in the list, it is added to the front.  If it is
present, it is moved there.  With optional argument TO-END, add/move to the
end of the list.

:PROPERTIES: :CUSTOM_ID: org-babel-expand-src-block-maybe :END:

## org-mouse-remove-match-and-spaces

Conditionally expand a source block.
Detect if this is context for a org-babel src-block and if so
then run ‘org-babel-expand-src-block’.

:PROPERTIES: :CUSTOM_ID: org-mouse-remove-match-and-spaces :END:

## org-comment-dwim (_arg)

Remove the match, make just one space around the point.

:PROPERTIES: :CUSTOM_ID: org-comment-dwim :END:

## org-beamer-mode (&optional arg)

Call ‘comment-dwim’ within a source edit buffer if needed.

:PROPERTIES: :CUSTOM_ID: org-beamer-mode :END:

## org-odt-export-as-odf-and-open

Support for editing Beamer oriented Org mode files.

:PROPERTIES: :CUSTOM_ID: org-odt-export-as-odf-and-open :END:

## org-archive-subtree (&optional find-done)

Export LaTeX fragment as OpenDocument formula and immediately open it.
Use ‘org-odt-export-as-odf’ to read LaTeX fragment and OpenDocument
formula file.

:PROPERTIES: :CUSTOM_ID: org-archive-subtree :END:

## org-capture-mode (&optional arg)

Move the current subtree to the archive.
The archive can be a certain top-level heading in the current
file, or in a different file.  The tree will be moved to that
location, the subtree heading be marked DONE, and the current

When called with a single prefix argument FIND-DONE, find whole
trees without any open TODO items and archive them (after getting
confirmation from the user).  When called with a double prefix
argument, find whole trees with timestamps before today and
archive them (after getting confirmation from the user).  If the
cursor is not at a headline when these commands are called, try
all level 1 trees.  If the cursor is on a headline, only try the

:PROPERTIES: :CUSTOM_ID: org-capture-mode :END:

## org-table-edit-field (arg)

Minor mode for special key bindings in a capture buffer.

Turning on this mode runs the normal hook ‘org-capture-mode-hook’.

:PROPERTIES: :CUSTOM_ID: org-table-edit-field :END:

Edit table field in a different window.
This is mainly useful for fields that contain hidden parts.

When called with a ‘C-u’ prefix, just make the full field
visible so that it can be edited in place.

When called with a ‘C-u C-u’ prefix, toggle ‘org-table-follow-field-mode’.

## org-babel-exp-process-buffer

Go to the end of current headline (ignoring tags).

:PROPERTIES: :CUSTOM_ID: org-babel-exp-process-buffer :END:

## org-entities-help

Execute all Babel blocks in current buffer.

:PROPERTIES: :CUSTOM_ID: org-entities-help :END:

## org-first-sibling-p

Create a Help buffer with all available entities.

:PROPERTIES: :CUSTOM_ID: org-first-sibling-p :END:

Is this heading the first child of its parents?

## org-open-at-mouse (ev)

Do nothing and return nil.
This function accepts any number of arguments, but ignores them.

(fn &rest IGNORE)

:PROPERTIES: :CUSTOM_ID: org-open-at-mouse :END:

## org-check-dates-range (start-date end-date)

Open file link or URL at mouse.
See the docstring of ‘org-open-file’ for details.

:PROPERTIES: :CUSTOM_ID: org-check-dates-range :END:

Check for deadlines/scheduled entries between START-DATE and END-DATE.

## org-kill-note-or-show-branches

Insert a radio list template appropriate for this major mode.

:PROPERTIES: :CUSTOM_ID: org-kill-note-or-show-branches :END:

## org-outdent-item-tree

Abort storing current note, or call ‘outline-show-branches’.

:PROPERTIES: :CUSTOM_ID: org-outdent-item-tree :END:

## org-agenda-set-restriction-lock-from-agenda (arg)

Outdent a local list item including its children.
If a region is active, all items inside will be moved.

:PROPERTIES: :CUSTOM_ID: org-agenda-set-restriction-lock-from-agenda :END:

## org-attach-open (&optional in-emacs)

Set the restriction lock to the agenda item at point from within the agenda.
When called with a ‘C-u’ prefix, restrict to
the file which contains the item.
Argument ARG is the prefix argument.

:PROPERTIES: :CUSTOM_ID: org-attach-open :END:

## org-agenda-append-agenda

Open an attachment of the current task.
If there are more than one attachment, you will be prompted for the file name.
This command will open the file using the settings in ‘org-file-apps’
and in the system-specific variants of this variable.
If IN-EMACS is non-nil, force opening in Emacs.

:PROPERTIES: :CUSTOM_ID: org-agenda-append-agenda :END:

## org-table-beginning-of-field (&optional n)

Append another agenda view to the current one.
This function allows interactive building of block agendas.
Agenda views are separated by ‘org-agenda-block-separator’.

:PROPERTIES: :CUSTOM_ID: org-table-beginning-of-field :END:

## org-mobile-move-capture

Move to the beginning of the current table field.
If already at or before the beginning, move to the beginning of the
previous field.
With numeric argument N, move N-1 fields backward first.

:PROPERTIES: :CUSTOM_ID: org-mobile-move-capture :END:

## org-lint (&optional arg)

Move the contents of the capture file to the inbox file.
Return a marker to the location where the new content has been added.
If nothing new has been added, return nil.

:PROPERTIES: :CUSTOM_ID: org-lint :END:

## org-latex-export-to-latex (&optional async subtreep visible-only body-only ext-plist)

Check current Org buffer for syntax mistakes.

By default, run all checkers.  With a ‘C-u’ prefix ARG, select one
category of checkers only.  With a ‘C-u C-u’ prefix, run one precise
checker by its name.

ARG can also be a list of checker names, as symbols, to run.

:PROPERTIES: :CUSTOM_ID: org-latex-export-to-latex :END:

## org-agenda-fortnight-view (&optional iso-week)

Export current buffer to a LaTeX file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the ‘org-export-stack’ interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don’t export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

:PROPERTIES: :CUSTOM_ID: org-agenda-fortnight-view :END:

## org-todo-yesterday (&optional arg)

Switch to fortnightly view for agenda.
With argument ISO-WEEK, switch to the corresponding ISO week.
If ISO-WEEK has more then 2 digits, only the last two encode
the week.  Any digits before this encode a year.  So 200712
means week 12 of year 2007.  Years ranging from 70 years ago
to 30 years in the future can also be written as 2-digit years.

:PROPERTIES: :CUSTOM_ID: org-todo-yesterday :END:

## org-sort (&optional with-case)

Like ‘org-todo’ but the time of change will be 23:59 of yesterday.

:PROPERTIES: :CUSTOM_ID: org-sort :END:

## orgtbl-create-or-convert-from-region (_arg)

Call ‘org-sort-entries’, ‘org-table-sort-lines’ or ‘org-sort-list’.
Optional argument WITH-CASE means sort case-sensitively.

:PROPERTIES: :CUSTOM_ID: orgtbl-create-or-convert-from-region :END:

## org-up-element

Create table or convert region to table, if no conflicting binding.
This installs the table binding ‘C-c |’, but only if there is no
conflicting binding to this key outside orgtbl-mode.

:PROPERTIES: :CUSTOM_ID: org-up-element :END:

## org-footnote-action (&optional special)

Move to upper element.

:PROPERTIES: :CUSTOM_ID: org-footnote-action :END:

## org-texinfo-convert-region-to-texinfo

Do the right thing for footnotes.

When at a definition, jump to the references if they exist, offer
to create them otherwise.

When neither at definition or reference, create a new footnote,
interactively if possible.

With prefix arg SPECIAL, or when no footnote can be created,

:PROPERTIES: :CUSTOM_ID: org-texinfo-convert-region-to-texinfo :END:

## org-agenda-tree-to-indirect-buffer (arg)

Assume the current region has Org syntax, and convert it to Texinfo.
This can be used in any buffer.  For example, you can write an
itemized list in Org syntax in an Texinfo buffer and use this
command to convert it.

:PROPERTIES: :CUSTOM_ID: org-agenda-tree-to-indirect-buffer :END:

## org-edit-src-exit

Show the subtree corresponding to the current entry in an indirect buffer.
This calls the command ‘org-tree-to-indirect-buffer’ from the original buffer.

With a numerical prefix ARG, go up to this level and then take that tree.
With a negative numeric ARG, go up by this number of levels.

With a ‘C-u’ prefix, make a separate frame for this tree, i.e. don’t use
the dedicated frame.

:PROPERTIES: :CUSTOM_ID: org-edit-src-exit :END:

## org-bibtex-create-in-current-entry (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-bibtex-create-in-current-entry :END:

## org-agenda-bulk-remove-overlays (&optional beg end)

Add bibliographical data to the current entry.
With a prefix arg, query for optional fields.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-remove-overlays :END:

Remove the mark overlays between BEG and END in the agenda buffer.
BEG and END default to the buffer limits.

This only removes the overlays, it does not remove the markers
from the list in ‘org-agenda-bulk-marked-entries’.

## org-metaleft (&optional _arg)

:PROPERTIES: :CUSTOM_ID: org-metaleft :END:

## org-attach-new (file)

Promote heading, list item at point or move table column left.

Calls ‘org-do-promote’, ‘org-outdent-item’ or ‘org-table-move-column’,
depending on context.  With no specific context, calls the Emacs
default ‘backward-word’.  See the individual commands for more
information.

This function runs the hook ‘org-metaleft-hook’ as a first step,
and returns at first non-nil value.

:PROPERTIES: :CUSTOM_ID: org-attach-new :END:

Create a new attachment FILE for the current task.
The attachment is created as an Emacs buffer.

## org-agenda-filter-by-category (strip)

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-category :END:

## org-indent-drawer

Filter lines in the agenda buffer that have a specific category.
The category is that of the current line.
Without prefix argument, keep only the lines of that category.
With a prefix argument, exclude the lines of that category.

:PROPERTIES: :CUSTOM_ID: org-indent-drawer :END:

## org-agenda-filter-by-tag (arg &optional char exclude)

Indent the drawer at point.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-tag :END:

## org-babel-execute-buffer (&optional arg)

Keep only those lines in the agenda buffer that have a specific tag.

The tag is selected with its fast selection letter, as configured.

With a ‘C-u’ prefix, exclude the agenda search.

With a ‘C-u C-u’ prefix, filter the literal tag, i.e. don’t
filter on all its group members.

A lisp caller can specify CHAR.  EXCLUDE means that the new tag
should be used to exclude the search - the interactive user can
also press ‘-’ or ‘+’ to switch between filtering and excluding.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-buffer :END:

## org-table-toggle-coordinate-overlays

Execute source code blocks in a buffer.
Call ‘org-babel-execute-src-block’ on every source block in
the current buffer.

:PROPERTIES: :CUSTOM_ID: org-table-toggle-coordinate-overlays :END:

## org-agenda-follow-mode

Toggle the display of Row/Column numbers in tables.

:PROPERTIES: :CUSTOM_ID: org-agenda-follow-mode :END:

## org-html-export-to-html (&optional async subtreep visible-only body-only ext-plist)

Toggle follow mode in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-html-export-to-html :END:

Export current buffer to a HTML file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the ‘org-export-stack’ interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don’t export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "" and "" tags.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return output file’s name.

## org-agenda-clock-out

Move subtree down or move table row down.
Calls ‘org-move-subtree-down’ or ‘org-table-move-row’ or
‘org-move-item-down’, depending on context.  See the individual

:PROPERTIES: :CUSTOM_ID: org-agenda-clock-out :END:

## org-get-tags-at (&optional pos local)

Stop the currently running clock.

:PROPERTIES: :CUSTOM_ID: org-get-tags-at :END:

## org-agenda-do-date-later (arg)

Get a list of all headline tags applicable at POS.
POS defaults to point.  If tags are inherited, the list contains
the targets in the same sequence as the headlines appear, i.e.
the tags of the current headline come last.
When LOCAL is non-nil, only return tags from the current headline,
ignore inherited ones.

:PROPERTIES: :CUSTOM_ID: org-agenda-do-date-later :END:

## org-cdlatex-environment-indent (&optional environment item)

Demote the inline task at point.
If the task has an end part, also demote it.

:PROPERTIES: :CUSTOM_ID: org-cdlatex-environment-indent :END:

Execute ‘cdlatex-environment’ and indent the inserted environment.

ENVIRONMENT and ITEM are passed to ‘cdlatex-environment’.

The inserted environment is indented to current indentation
unless point is at the beginning of the line, in which the
environment remains unintended.

With prefix arg UNCOMPILED, load the uncompiled versions.

## org-agenda-exit

Insert a new heading with same level as current, after current subtree.

:PROPERTIES: :CUSTOM_ID: org-agenda-exit :END:

## org-babel-pop-to-session (&optional arg info)

Exit the agenda, killing Org buffers loaded by the agenda.
Like ‘org-agenda-Quit’, but kill any buffers that were created by
the agenda.  Org buffers visited directly by the user will not be
touched.  Also, exit the agenda even if it is in column view.

:PROPERTIES: :CUSTOM_ID: org-babel-pop-to-session :END:

## org-align-all-tags

Switch to the session of the current code block.
Uses ‘org-babel-initiate-session’ to start the session.  If called
with a prefix argument then this is passed on to
‘org-babel-initiate-session’.

:PROPERTIES: :CUSTOM_ID: org-align-all-tags :END:

## org-insert-all-links (arg &optional pre post)

Align the tags in all headings.

## org-clone-subtree-with-time-shift (n &optional shift)

When ‘ARG’ is a number, insert the last N link(s).
‘PRE’ and ‘POST’ are optional arguments to define a string to
prepend or to append.

:PROPERTIES: :CUSTOM_ID: org-clone-subtree-with-time-shift :END:

## org-narrow-to-block

Clone the task (subtree) at point N times.
The clones will be inserted as siblings.

In interactive use, the user will be prompted for the number of
clones to be produced.  If the entry has a timestamp, the user
will also be prompted for a time shift, which may be a repeater
as used in time stamps, for example ‘+3d’.  To disable this,
you can call the function with a universal prefix argument.

When a valid repeater is given and the entry contains any time
stamps, the clones will become a sequence in time, with time
stamps in the subtree shifted for each clone produced.  If SHIFT
is nil or the empty string, time stamps will be left alone.  The
ID property of the original subtree is removed.

In each clone, all the CLOCK entries will be removed.  This
prevents Org from considering that the clocked times overlap.

If the original subtree did contain time stamps with a repeater,
the following will happen:
- the repeater will be removed in each clone
- an additional clone will be produced, with the current, unshifted
date(s) in the entry.
- the original entry will be placed *after* all the clones, with
repeater intact.
- the start days in the repeater in the original entry will be shifted
to past the last clone.
In this way you can spell out a number of instances of a repeating task,
and still retain the repeater to cover future instances of the task.

As described above, N+1 clones are produced when the original
subtree has a repeater.  Setting N to 0, then, can be used to
remove the repeater from a subtree and create a shifted clone
with the original repeater.

:PROPERTIES: :CUSTOM_ID: org-narrow-to-block :END:

## org-columns-get-format (&optional fmt-string)

Narrow buffer to the current block.

:PROPERTIES: :CUSTOM_ID: org-columns-get-format :END:

## org-agenda-mode

Return columns format specifications.
When optional argument FMT-STRING is non-nil, use it as the
current specifications.  This function also sets
‘org-columns-current-fmt-compiled’ and
‘org-columns-current-fmt’.

:PROPERTIES: :CUSTOM_ID: org-agenda-mode :END:

## org-cycle (&optional arg)

Mode for time-sorted view on action items in Org files.

The following commands are available:

key             binding
---             -------

C-c		Prefix Command
TAB		org-agenda-goto
C-k		org-agenda-kill
RET		org-agenda-switch-to
C-n		org-agenda-next-line
C-p		org-agenda-previous-line
C-x		Prefix Command
ESC		Prefix Command
C-_		org-agenda-undo
SPC		org-agenda-show-and-scroll-up
$org-agenda-archive % org-agenda-bulk-mark-regexp * org-agenda-bulk-mark-all + org-agenda-priority-up , org-agenda-priority - org-agenda-priority-down . org-agenda-goto-today / org-agenda-filter-by-tag 0 .. 9 digit-argument : org-agenda-set-tags ; org-timer-set-timer < org-agenda-filter-by-category = org-agenda-filter-by-regexp > org-agenda-date-prompt ? org-agenda-show-the-flagging-note A org-agenda-append-agenda B org-agenda-bulk-action C org-agenda-convert-date D org-agenda-toggle-diary E org-agenda-entry-text-mode F org-agenda-follow-mode G org-agenda-toggle-time-grid H org-agenda-holidays I org-agenda-clock-in J org-agenda-clock-goto K org-habit-toggle-habits L org-agenda-recenter M org-agenda-phases-of-moon N org-agenda-next-item O org-agenda-clock-out P org-agenda-previous-item Q org-agenda-Quit R org-agenda-clockreport-mode S org-agenda-sunrise-sunset T org-agenda-show-tags U org-agenda-bulk-unmark-all X org-agenda-clock-cancel [ org-agenda-manipulate-query-add ] org-agenda-manipulate-query-subtract ^ org-agenda-filter-by-top-headline _ org-agenda-filter-by-effort a org-agenda-archive-default-with-confirmation b org-agenda-earlier c org-agenda-goto-calendar d org-agenda-day-view e org-agenda-set-effort f org-agenda-later g org-agenda-redo-all h org-agenda-holidays i org-agenda-diary-entry j org-agenda-goto-date k org-agenda-capture l org-agenda-log-mode m org-agenda-bulk-mark n org-agenda-next-line o delete-other-windows p org-agenda-previous-line q org-agenda-quit r org-agenda-redo s org-save-all-org-buffers t org-agenda-todo u org-agenda-bulk-unmark v org-agenda-view-mode-dispatch w org-agenda-week-view x org-agenda-exit y org-agenda-year-view z org-agenda-add-note { org-agenda-manipulate-query-add-re | org-agenda-filter-remove-all } org-agenda-manipulate-query-subtract-re ~ org-agenda-limit-interactively DEL org-agenda-show-scroll-down C-/ org-agenda-undo org-agenda-todo-previousset org-agenda-todo-nextset org-agenda-drag-line-forward org-agenda-drag-line-backward org-agenda-priority-down org-agenda-do-date-earlier org-agenda-do-date-later org-agenda-priority-up org-agenda-show-scroll-down org-agenda-next-line org-agenda-goto-mouse org-agenda-show-mouse Prefix Command org-agenda-goto org-agenda-undo org-agenda-previous-line org-agenda-backward-block org-agenda-forward-block M-* org-agenda-bulk-toggle-all M-m org-agenda-bulk-toggle C-c C-a org-attach C-c C-d org-agenda-deadline C-c C-n org-agenda-next-date-line C-c C-o org-agenda-open-link C-c C-p org-agenda-previous-date-line C-c C-q org-agenda-set-tags C-c C-s org-agenda-schedule C-c C-t org-agenda-todo C-c C-w org-agenda-refile C-c C-x Prefix Command C-c C-z org-agenda-add-note C-c$		org-agenda-archive
C-c ,		org-agenda-priority

C-x C-s		org-save-all-org-buffers
C-x C-w		org-agenda-write
C-x u		org-agenda-undo

C-c C-x C-a	org-agenda-archive-default
C-c C-x C-c	org-agenda-columns
C-c C-x C-e	org-clock-modify-effort-estimate
C-c C-x TAB	org-agenda-clock-in
C-c C-x C-j	org-clock-goto
C-c C-x RET	Prefix Command
C-c C-x C-o	org-agenda-clock-out
C-c C-x C-s	org-agenda-archive
C-c C-x C-x	org-agenda-clock-cancel
C-c C-x <	org-agenda-set-restriction-lock-from-agenda
C-c C-x >	org-agenda-remove-restriction-lock
C-c C-x A	org-agenda-archive-to-archive-sibling
C-c C-x a	org-agenda-toggle-archive-tag
C-c C-x b	org-agenda-tree-to-indirect-buffer
C-c C-x e	org-agenda-set-effort
C-c C-x p	org-agenda-set-property
C-c C-x 	org-agenda-priority-down
C-c C-x 	org-agenda-do-date-earlier
C-c C-x 			org-agenda-do-date-later
C-c C-x 			org-agenda-priority-up

C-c C-x RET g	org-mobile-pull
C-c C-x RET p	org-mobile-push

:PROPERTIES: :CUSTOM_ID: org-cycle :END:

## org-dblock-write:amazon (params)

TAB-action and visibility cycling for Org mode.

This is the command invoked in Org mode by the ‘TAB’ key.  Its main
purpose is outline visibility cycling, but it also invokes other actions
in special contexts.

When this function is called with a ‘C-u’ prefix, rotate the entire
buffer through 3 states (global cycling)
1. OVERVIEW: Show only top-level headlines.
2. CONTENTS: Show all headlines of all levels, but no body text.
3. SHOW ALL: Show everything.

With a ‘C-u C-u’ prefix argument, switch to the startup visibility,
determined by the variable ‘org-startup-folded’, and by any VISIBILITY
properties in the buffer.

With a ‘C-u C-u C-u’ prefix argument, show the entire buffer, including
any drawers.

When inside a table, re-align the table and move to the next field.

When point is at the beginning of a headline, rotate the subtree started
by this line through 3 different states (local cycling)
1. FOLDED:   Only the main headline is shown.
2. CHILDREN: The main headline and the direct children are shown.
From this state, you can move to one of the children
and zoom in further.
3. SUBTREE:  Show the entire subtree, including body text.
If there is no subtree, switch directly from CHILDREN to FOLDED.

When point is at the beginning of an empty headline and the variable
‘org-cycle-level-after-item/entry-creation’ is set, cycle the level
of the headline by demoting and promoting it to likely levels.  This
speeds up creation document structure by pressing ‘TAB’ once or several
times right after creating a new headline.

When there is a numeric prefix, go up to a heading with level ARG, do
is negative, go up that many levels.

When point is not at the beginning of a headline, execute the global
binding for ‘TAB’, which is re-indenting the line.  See the option
‘org-cycle-emulate-tab’ for details.

As a special case, if point is at the beginning of the buffer and there is
no headline in line 1, this function will act as if called with prefix arg
(‘C-u TAB’, same as ‘S-TAB’) also when called without prefix arg, but only
if the variable ‘org-cycle-global-at-bob’ is t.

:PROPERTIES: :CUSTOM_ID: org-dblock-write:amazon :END:

## org-set-visibility-according-to-property (&optional no-cleanup)

Dynamic block for inserting the cover of a book.

:PROPERTIES: :CUSTOM_ID: org-set-visibility-according-to-property :END:

## org-ctags-visit-buffer-or-file (name &optional create)

Switch subtree visibilities according to :VISIBILITY: property.

:PROPERTIES: :CUSTOM_ID: org-ctags-visit-buffer-or-file :END:

## org-table-fedit-toggle-coordinates

This function is intended to be used in ORG-OPEN-LINK-FUNCTIONS.
Visit buffer named ‘NAME.org’.  If there is no such buffer, visit the file
with the same name if it exists.  If the file does not exist, then behavior
depends on the value of CREATE.

If CREATE is nil (default), then return nil.  Do not create a new file.
If CREATE is t, create the new file and visit it.
If CREATE is the symbol ‘ask’, then ask the user if they wish to create
the new file.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-toggle-coordinates :END:

## org-ctags-find-tag-interactive

Toggle the display of coordinates in the referenced table.

:PROPERTIES: :CUSTOM_ID: org-ctags-find-tag-interactive :END:

## org-src-mode (&optional arg)

Prompt for the name of a tag, with autocompletion, then visit the named tag.
Uses ‘ido-mode’ if available.
If the user enters a string that does not match an existing tag, create
a new topic.

:PROPERTIES: :CUSTOM_ID: org-src-mode :END:

## org-agenda-schedule (arg &optional time)

Minor mode for language major mode buffers generated by Org.

This minor mode is turned on in two situations:
- when editing a source code snippet with ‘C-c '’
- when formatting a source code snippet for export with htmlize.

key             binding
---             -------

C-c		Prefix Command
C-x		Prefix Command

C-x C-s		org-edit-src-save

C-c C-k		org-edit-src-abort
C-c '		org-edit-src-exit

:PROPERTIES: :CUSTOM_ID: org-agenda-schedule :END:

## org-table-show-reference (&optional local)

Schedule the item at point.
ARG is passed through to ‘org-schedule’.

:PROPERTIES: :CUSTOM_ID: org-table-show-reference :END:

Show the location/value of the expression at point. When LOCAL is non-nil, show references for the table at point. :PROPERTIES: :CUSTOM_ID: org-ctrl-c-ctrl-c :END: ## org-babel-processing-view-sketch Set tags in headline, or update according to changed information at point. This command does many different things, depending on context: - If a function in ‘org-ctrl-c-ctrl-c-hook’ recognizes this location, this is what we do. - If the cursor is on a statistics cookie, update it. - If the cursor is in a headline, prompt for tags and insert them into the current line, aligned to ‘org-tags-column’. When called with prefix arg, realign all tags in the current buffer. - If the cursor is in one of the special #+KEYWORD lines, this triggers scanning the buffer for these lines and updating the information. - If the cursor is inside a table, realign the table. This command works even if the automatic table editor has been turned off. - If the cursor is on a #+TBLFM line, re-apply the formulas to the entire table. - If the cursor is at a footnote reference or definition, jump to the corresponding definition or references, respectively. - If the cursor is a the beginning of a dynamic block, update it. - If the current buffer is a capture buffer, close note and file it. - If the cursor is on a <<>>, update radio targets and corresponding links in this buffer. - If the cursor is on a numbered item in a plain list, renumber the ordered list. - If the cursor is on a checkbox, toggle it. - If the cursor is on a code block, evaluate it. The variable ‘org-confirm-babel-evaluate’ can be used to control prompting before code block evaluation, by default every code block evaluation requires confirmation. Code block evaluation can be inhibited by setting ‘org-babel-no-eval-on-ctrl-c-ctrl-c’. :PROPERTIES: :CUSTOM_ID: org-babel-processing-view-sketch :END: ## org-clock-out (&optional switch-to-state fail-quietly at-time) Show the sketch of the Processing block under point in an external viewer. :PROPERTIES: :CUSTOM_ID: org-clock-out :END: ## org-columns-redo Stop the currently running clock. Throw an error if there is no running clock and FAIL-QUIETLY is nil. With a universal prefix, prompt for a state to switch the clocked out task to, overriding the existing value of ‘org-clock-out-switch-to-state’. :PROPERTIES: :CUSTOM_ID: org-columns-redo :END: ## org-agenda-archives-mode (&optional with-files) Construct the column display again. :PROPERTIES: :CUSTOM_ID: org-agenda-archives-mode :END: ## org-beginning-of-item-list Toggle inclusion of items in trees marked with :ARCHIVE:. When called with a prefix argument, include all archive files as well. :PROPERTIES: :CUSTOM_ID: org-beginning-of-item-list :END: ## orgtbl-mode (&optional arg) Go to the beginning item of the current list or sublist. Throw an error when not in a list. :PROPERTIES: :CUSTOM_ID: orgtbl-mode :END: ## org-columns-quit The ‘org-mode’ table editor as a minor mode for use in other modes. :PROPERTIES: :CUSTOM_ID: org-columns-quit :END: ## org-force-self-insert (N) Remove the column overlays and in this way exit column editing. :PROPERTIES: :CUSTOM_ID: org-force-self-insert :END: ## org-clock-in-last (&optional arg) Needed to enforce self-insert under remapping. :PROPERTIES: :CUSTOM_ID: org-clock-in-last :END: ## org-footnote-normalize Clock in the last closed clocked item. When already clocking in, send an warning. With a universal prefix argument, select the task you want to clock in from the last clocked in tasks. With two universal prefix arguments, start clocking using the last clock-out time, if any. With three universal prefix arguments, interactively prompt for a todo state to switch to, overriding the existing value ‘org-clock-in-switch-to-state’. :PROPERTIES: :CUSTOM_ID: org-footnote-normalize :END: ## org-export-stack Turn every footnote in buffer into a numbered one. :PROPERTIES: :CUSTOM_ID: org-export-stack :END: ## org-md-convert-region-to-md Menu for asynchronous export results and running processes. :PROPERTIES: :CUSTOM_ID: org-md-convert-region-to-md :END: ## org-customize Assume the current region has Org syntax, and convert it to Markdown. This can be used in any buffer. For example, you can write an itemized list in Org syntax in a Markdown buffer and use this command to convert it. :PROPERTIES: :CUSTOM_ID: org-customize :END: ## org-babel-tangle-file (file &optional target-file lang) Call the customize function with org as argument. :PROPERTIES: :CUSTOM_ID: org-babel-tangle-file :END: ## org-goto-ret (&optional _arg) Extract the bodies of source code blocks in FILE. Source code blocks are extracted with ‘org-babel-tangle’. Optional argument TARGET-FILE can be used to specify a default export file for all source blocks. Optional argument LANG can be used to limit the exported source code blocks by language. Return a list whose CAR is the tangled file name. :PROPERTIES: :CUSTOM_ID: org-goto-ret :END: ## org-create-math-formula (latex-frag &optional mathml-file) Finish ‘org-goto’ by going to the new location. :PROPERTIES: :CUSTOM_ID: org-create-math-formula :END: ## org-previous-block (arg &optional block-regexp) Convert LATEX-FRAG to MathML and store it in MATHML-FILE. Use ‘org-latex-to-mathml-convert-command’. If the conversion is sucessful, return the portion between " " elements otherwise return nil. When MATHML-FILE is specified, write the results in to that file. When invoked as an interactive command, prompt for LATEX-FRAG, with initial value set to the current active region and echo the results for user inspection. :PROPERTIES: :CUSTOM_ID: org-previous-block :END: ## org-timestamp-down-day (&optional arg) Jump to the previous block. With a prefix argument ARG, jump backward ARG many source blocks. When BLOCK-REGEXP is non-nil, use this regexp to find blocks. :PROPERTIES: :CUSTOM_ID: org-timestamp-down-day :END: ## org-agenda-bulk-unmark-all Decrease the date in the time stamp by one day. With prefix ARG, change that many days. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-unmark-all :END: ## org-show-subtree Remove all marks in the agenda buffer. This will remove the markers and the overlays. :PROPERTIES: :CUSTOM_ID: org-show-subtree :END: ## org-babel-lilypond-toggle-pdf-generation Show everything after this heading at deeper levels. :PROPERTIES: :CUSTOM_ID: org-babel-lilypond-toggle-pdf-generation :END: ## org-columns-remove-overlays Toggle whether pdf will be generated by compilation. :PROPERTIES: :CUSTOM_ID: org-columns-remove-overlays :END: ## org-agenda-phases-of-moon Remove all currently active column overlays. :PROPERTIES: :CUSTOM_ID: org-agenda-phases-of-moon :END: ## org-property-previous-allowed-value (&optional _previous) Display the phases of the moon for the 3 months around the cursor date. :PROPERTIES: :CUSTOM_ID: org-property-previous-allowed-value :END: ## org-todo-list (&optional arg) Switch to the next allowed value for this property. :PROPERTIES: :CUSTOM_ID: org-todo-list :END: ## org-odt-convert (&optional in-file out-fmt open) Show all (not done) TODO entries from all agenda file in a single list. The prefix arg can be used to select a specific TODO keyword and limit the list to these. When using ‘C-u’, you will be prompted for a keyword. A numeric prefix directly selects the Nth keyword in ‘org-todo-keywords-1’. :PROPERTIES: :CUSTOM_ID: org-odt-convert :END: ## orgtbl-toggle-comment Convert IN-FILE to format OUT-FMT using a command line converter. IN-FILE is the file to be converted. If unspecified, it defaults to variable ‘buffer-file-name’. OUT-FMT is the desired output format. Use ‘org-odt-convert-process’ as the converter. If OPEN is non-nil then the newly converted file is opened using ‘org-open-file’. :PROPERTIES: :CUSTOM_ID: orgtbl-toggle-comment :END: ## org-duration-set-regexps Comment or uncomment the orgtbl at point. :PROPERTIES: :CUSTOM_ID: org-duration-set-regexps :END: Set duration related regexps. :PROPERTIES: :CUSTOM_ID: org-previous-link :END: ## org-babel-hide-result-toggle (&optional force) Move backward to the previous link. If the link is in hidden text, expose it. :PROPERTIES: :CUSTOM_ID: org-babel-hide-result-toggle :END: ## org-attach Toggle the visibility of the current result. :PROPERTIES: :CUSTOM_ID: org-attach :END: ## org-agenda-columns The dispatcher for attachment commands. Shows a list of commands and prompts for another key to execute a command. :PROPERTIES: :CUSTOM_ID: org-agenda-columns :END: ## org-occur (regexp &optional keep-previous callback) Turn on or update column view in the agenda. :PROPERTIES: :CUSTOM_ID: org-occur :END: ## org-table-iterate-buffer-tables Make a compact tree which shows all matches of REGEXP. The tree will show the lines where the regexp matches, and any other context defined in ‘org-show-context-detail’, which see. When optional argument KEEP-PREVIOUS is non-nil, highlighting and exposing done by a previous call to ‘org-occur’ will be kept, to allow stacking of calls to this command. Optional argument CALLBACK can be a function of no argument. In this case, it is called with point at the end of the match, match data being set accordingly. Current match is shown only if the return value is non-nil. The function must neither move point nor alter narrowing. :PROPERTIES: :CUSTOM_ID: org-table-iterate-buffer-tables :END: ## org-attach-reveal-in-emacs Iterate all tables in the buffer, to converge inter-table dependencies. :PROPERTIES: :CUSTOM_ID: org-attach-reveal-in-emacs :END: ## org-update-all-dblocks Show the attachment directory of the current task in dired. :PROPERTIES: :CUSTOM_ID: org-update-all-dblocks :END: ## org-babel-examplize-region (beg end &optional results-switches inline) Update all dynamic blocks in the buffer. This function can be used in a hook. :PROPERTIES: :CUSTOM_ID: org-babel-examplize-region :END: ## org-indent-item-tree Comment out region using the inline ‘==’ or ‘: ’ org example quote. :PROPERTIES: :CUSTOM_ID: org-indent-item-tree :END: ## org-delete-backward-char (N) Indent a local list item including its children. If a region is active, all items inside will be moved. :PROPERTIES: :CUSTOM_ID: org-delete-backward-char :END: ## org-agenda-archive-with (cmd &optional confirm) Like ‘delete-backward-char’, insert whitespace at field end in tables. When deleting backwards, in tables this function will insert whitespace in front of the next "|" separator, to keep the table aligned. The table will still be marked for re-alignment if the field did fill the entire column, because, in this case the deletion might narrow the column. :PROPERTIES: :CUSTOM_ID: org-agenda-archive-with :END: ## org-element-update-syntax Move the entry to the archive sibling. :PROPERTIES: :CUSTOM_ID: org-element-update-syntax :END: ## org-agenda-add-note (&optional arg) Update parser internals. :PROPERTIES: :CUSTOM_ID: org-agenda-add-note :END: ## org-agenda-bulk-mark (&optional arg) Add a time-stamped note to the entry at point. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark :END: ## org-insert-todo-subheading (arg) Mark the entry at point for future bulk action. :PROPERTIES: :CUSTOM_ID: org-insert-todo-subheading :END: ## org-koma-letter-export-to-pdf (&optional async subtreep visible-only body-only ext-plist) Insert a new subheading with TODO keyword or checkbox and demote it. Works for outline headings and for plain lists alike. :PROPERTIES: :CUSTOM_ID: org-koma-letter-export-to-pdf :END: ## org-bibtex-search (string) Export current buffer as a KOMA Scrlttr2 letter (pdf). If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{letter}" and "\end{letter}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. Return PDF file’s name. :PROPERTIES: :CUSTOM_ID: org-bibtex-search :END: ## org-columns-widen (arg) Search for bibliographical entries in agenda files. This function relies ‘org-search-view’ to locate results. :PROPERTIES: :CUSTOM_ID: org-columns-widen :END: ## org-agenda-manipulate-query-subtract Make the column wider by ARG characters. :PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-subtract :END: ## org-meta-return (&optional arg) Manipulate the query by adding a search term with negative selection. Negative selection means term must not be matched for selection of an entry. :PROPERTIES: :CUSTOM_ID: org-meta-return :END: ## org-agenda-bulk-toggle-all Insert a new heading or wrap a region in a table. Calls ‘org-insert-heading’, ‘org-insert-item’ or ‘org-table-wrap-region’, depending on context. When called with an argument, unconditionally call ‘org-insert-heading’. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-toggle-all :END: ## org-agenda-bulk-unmark (&optional arg) Toggle all marks for bulk action. :PROPERTIES: :CUSTOM_ID: org-agenda-bulk-unmark :END: ## org-cut-subtree (&optional n) Unmark the entry at point for future bulk action. :PROPERTIES: :CUSTOM_ID: org-cut-subtree :END: ## org-goto-quit Cut the current subtree into the clipboard. With prefix arg N, cut this many sequential subtrees. This is a short-hand for marking the subtree and then cutting it. :PROPERTIES: :CUSTOM_ID: org-goto-quit :END: ## org-attach-url (url) Finish ‘org-goto’ without cursor motion. :PROPERTIES: :CUSTOM_ID: org-attach-url :END: ## org-agenda-month-view (&optional month) :PROPERTIES: :CUSTOM_ID: org-agenda-month-view :END: ## org-agenda-limit-interactively (remove) Switch to monthly view for agenda. With argument MONTH, switch to that month. If MONTH has more then 2 digits, only the last two encode the month. Any digits before this encode a year. So 200712 means December year 2007. Years ranging from 70 years ago to 30 years in the future can also be written as 2-digit years. :PROPERTIES: :CUSTOM_ID: org-agenda-limit-interactively :END: ## org-babel-hide-result-toggle-maybe In agenda, interactively limit entries to various maximums. :PROPERTIES: :CUSTOM_ID: org-babel-hide-result-toggle-maybe :END: ## org-narrow-to-element Toggle visibility of result at point. :PROPERTIES: :CUSTOM_ID: org-narrow-to-element :END: ## org-inlinetask-promote Narrow buffer to current element. :PROPERTIES: :CUSTOM_ID: org-inlinetask-promote :END: ## org-agenda-date-later-hours (arg) Promote the inline task at point. If the task has an end part, promote it. Also, prevents level from going below ‘org-inlinetask-min-level’. :PROPERTIES: :CUSTOM_ID: org-agenda-date-later-hours :END: ## org-decompose-region (start end) Change the time of this item, in hour steps. :PROPERTIES: :CUSTOM_ID: org-decompose-region :END: ## org-export-stack-view (&optional in-emacs) Decompose text in the current region. When called from a program, expects two arguments, positions (integers or markers) specifying the region. :PROPERTIES: :CUSTOM_ID: org-export-stack-view :END: ## org-columns-narrow (arg) View export results at point in stack. With an optional prefix argument IN-EMACS, force viewing files within Emacs. :PROPERTIES: :CUSTOM_ID: org-columns-narrow :END: ## org-table-transpose-table-at-point Make the column narrower by ARG characters. :PROPERTIES: :CUSTOM_ID: org-table-transpose-table-at-point :END: ## org-columns-edit-allowed Transpose Org table at point and eliminate hlines. So a table like | 1 | 2 | 4 | 5 | |---+---+---+---| | a | b | c | d | | e | f | g | h | will be transposed as | 1 | a | e | | 2 | b | f | | 4 | c | g | | 5 | d | h | Note that horizontal lines disappear. :PROPERTIES: :CUSTOM_ID: org-columns-edit-allowed :END: ## org-table-fedit-finish (&optional arg) Edit the list of allowed values for the current property. :PROPERTIES: :CUSTOM_ID: org-table-fedit-finish :END: ## org-occur-in-agenda-files (regexp &optional _nlines) Parse the buffer for formula definitions and install them. With prefix ARG, apply the new formulas to the table. :PROPERTIES: :CUSTOM_ID: org-occur-in-agenda-files :END: ## org-convert-to-oddeven-levels Call ‘multi-occur’ with buffers for all agenda files. :PROPERTIES: :CUSTOM_ID: org-convert-to-oddeven-levels :END: ## org-show-block-all Convert an Org file with only odd levels to one with odd/even levels. This promotes level 3 to level 2, level 5 to level 3 etc. If the file contains a section with an even level, conversion would destroy the structure of the file. An error is signaled in this case. :PROPERTIES: :CUSTOM_ID: org-show-block-all :END: ## org-ctags-append-topic (name &optional narrowp) Unfold all blocks in the current buffer. :PROPERTIES: :CUSTOM_ID: org-ctags-append-topic :END: ## org-koma-letter-export-to-latex (&optional async subtreep visible-only body-only ext-plist) This function is intended to be used in ORG-OPEN-LINK-FUNCTIONS. Append a new toplevel heading to the end of the current buffer. The heading contains NAME surrounded by <>, thus making the heading a destination for the tag ‘NAME’. :PROPERTIES: :CUSTOM_ID: org-koma-letter-export-to-latex :END: ## org-archive-subtree-default-with-confirmation Export current buffer as a KOMA Scrlttr2 letter (tex). If narrowing is active in the current buffer, only export its narrowed part. If a region is active, export that region. A non-nil optional argument ASYNC means the process should happen asynchronously. The resulting file should be accessible through the ‘org-export-stack’ interface. When optional argument SUBTREEP is non-nil, export the sub-tree at point, extracting information from the headline properties first. When optional argument VISIBLE-ONLY is non-nil, don’t export contents of hidden elements. When optional argument BODY-ONLY is non-nil, only write code between "\begin{letter}" and "\end{letter}". EXT-PLIST, when provided, is a property list with external parameters overriding Org default settings, but still inferior to file-local settings. When optional argument PUB-DIR is set, use it as the publishing directory. Return output file’s name. :PROPERTIES: :CUSTOM_ID: org-archive-subtree-default-with-confirmation :END: ## org-encrypt-entries Archive the current subtree with the default command. This command is set with the variable ‘org-archive-default-command’. :PROPERTIES: :CUSTOM_ID: org-encrypt-entries :END: ## org-tree-to-indirect-buffer (&optional arg) Encrypt all top-level entries in the current buffer. :PROPERTIES: :CUSTOM_ID: org-tree-to-indirect-buffer :END: ## org-agenda-previous-item (n) Create indirect buffer and narrow it to current subtree. With a numerical prefix ARG, go up to this level and then take that tree. If ARG is negative, go up that many levels. If ‘org-indirect-buffer-display’ is not ‘new-frame’, the command removes the indirect buffer previously made with this command, to avoid proliferation of indirect buffers. However, when you call the command with a ‘C-u’ prefix, or when ‘org-indirect-buffer-display’ is ‘new-frame’, the last buffer is kept so that you can work with several indirect buffers at the same time. If ‘org-indirect-buffer-display’ is ‘dedicated-frame’, the ‘C-u’ prefix also requests that a new frame be made for the new buffer, so that the dedicated frame is not changed. :PROPERTIES: :CUSTOM_ID: org-agenda-previous-item :END: ## org-babel-detangle (&optional source-code-file) Move cursor to next agenda item. :PROPERTIES: :CUSTOM_ID: org-babel-detangle :END: ## org-end-of-item-list Propagate changes in source file back original to Org file. This requires that code blocks were tangled with link comments which enable the original code blocks to be found. :PROPERTIES: :CUSTOM_ID: org-end-of-item-list :END: ## org-agenda-dim-blocked-tasks (&optional invisible) Go to the end of the current list or sublist. Throw an error when not in a list. :PROPERTIES: :CUSTOM_ID: org-agenda-dim-blocked-tasks :END: ## org-babel-open-src-block-result (&optional re-run) Dim currently blocked TODOs in the agenda display. When INVISIBLE is non-nil, hide currently blocked TODO instead of dimming them. :PROPERTIES: :CUSTOM_ID: org-babel-open-src-block-result :END: ## org-list-repair If ‘point’ is on a src block then open the results of the source code block, otherwise return nil. With optional prefix argument RE-RUN the source-code block is evaluated even if results already exist. :PROPERTIES: :CUSTOM_ID: org-list-repair :END: ## org-at-date-range-p (&optional inactive-ok) Fix indentation, bullets and checkboxes in the list at point. :PROPERTIES: :CUSTOM_ID: org-at-date-range-p :END: ## org-bibtex-check (&optional optional) Non-nil if point is inside a date range. When optional argument INACTIVE-OK is non-nil, also consider inactive time ranges. When this function returns a non-nil value, match data is set according to ‘org-tr-regexp-both’ or ‘org-tr-regexp’, depending on INACTIVE-OK. :PROPERTIES: :CUSTOM_ID: org-bibtex-check :END: ## org-lint--hide-checker Check the current headline for required fields. With prefix argument OPTIONAL also prompt for optional fields. :PROPERTIES: :CUSTOM_ID: org-lint--hide-checker :END: ## org-list-make-subtree Hide all reports from checker that generated the report at point. :PROPERTIES: :CUSTOM_ID: org-list-make-subtree :END: ## org-update-statistics-cookies (all) Convert the plain list at point into a subtree. :PROPERTIES: :CUSTOM_ID: org-update-statistics-cookies :END: # Options Update the statistics cookie, either from TODO or from checkboxes. This should be called with the cursor in a line with a statistics cookie. When called with a C-u prefix, update all statistics cookies in the buffer. :PROPERTIES: :CUSTOM_ID: options :END: ## org-odt-styles-file (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-odt-styles-file :END: Default styles file for use with ODT export. Valid values are one of: 1. nil 2. path to a styles.xml file 3. path to a *.odt or a *.ott file 4. list of the form (ODT-OR-OTT-FILE (FILE-MEMBER-1 FILE-MEMBER-2 ...)) In case of option 1, an in-built styles.xml is used. See org-odt-styles-dir' for more information. In case of option 3, the specified file is unzipped and the styles.xml embedded therein is used. In case of option 4, the specified ODT-OR-OTT-FILE is unzipped and FILE-MEMBER-1, FILE-MEMBER-2 etc are copied in to the generated odt file. Use relative path for specifying the FILE-MEMBERS. styles.xml must be specified as one of the FILE-MEMBERS. Use options 1, 2 or 3 only if styles.xml alone suffices for achieving the desired formatting. Use option 4, if the styles.xml references additional files like header and footer images for achieving the desired formatting. Use "#+ODT_STYLES_FILE: ..." directive to set this variable on a per-file basis. For example, #+ODT_STYLES_FILE: "/path/to/styles.xml" or #+ODT_STYLES_FILE: ("/path/to/file.ott" ("styles.xml" "image/hdr.png")). ## org-read-date-popup-calendar (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-read-date-popup-calendar :END: Non-nil means pop up a calendar when prompting for a date. In the calendar, the date can be selected with mouse-1. However, the minibuffer will also be active, and you can simply enter the date as well. When nil, only the minibuffer will be available. ## org-export-with-properties (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-properties :END: Non-nil means export contents of properties drawers. When t, all properties are exported. This may also be a list of properties to export, as strings. This option can also be set with the OPTIONS keyword, e.g. "prop:t". ## org-agenda-max-entries nil :PROPERTIES: :CUSTOM_ID: org-agenda-max-entries :END: Maximum number of entries to display in an agenda. This can be nil (no limit) or an integer or an alist of agenda types with an associated number of entries to display in this type. ## org-log-note-clock-out (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-log-note-clock-out :END: Non-nil means record a note when clocking out of an item. This can also be configured on a per-file basis by adding one of the following lines anywhere in the buffer: #+STARTUP: lognoteclock-out #+STARTUP: nolognoteclock-out :PROPERTIES: :CUSTOM_ID: org-link-abbrev-alist :END: Alist of link abbreviations. The car of each element is a string, to be replaced at the start of a link. The cdrs are replacement values, like ("linkkey" . REPLACE). Abbreviated links in Org buffers can have an optional tag after a double colon, e.g., [[linkkey:tag][description]] The linkkey' must be a single word, starting with a letter, followed by letters, numbers, -' or _'. If REPLACE is a string, the tag will simply be appended to create the link. If the string contains "%s", the tag will be inserted there. If the string contains "%h", it will cause a url-encoded version of the tag to be inserted at that point (see the function url-hexify-string'). If the string contains the specifier "%(my-function)", then the custom function my-function' will be invoked: this function takes the tag as its only argument and must return a string. REPLACE may also be a function that will be called with the tag as the only argument to create the link, which should be returned as a string. See the manual for examples. ## org-html-format-drawer-function (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-format-drawer-function :END: Function called to format a drawer in HTML code. The function must accept two parameters: NAME the drawer name, like "LOGBOOK" CONTENTS the contents of the drawer. The function should return the string to be exported. For example, the variable could be set to the following function in order to mimic default behavior: The default value simply returns the value of CONTENTS. ## org-latex-hyperref-template (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-hyperref-template :END: Template for hyperref package options. This format string may contain these elements: %a for AUTHOR keyword %t for TITLE keyword %s for SUBTITLE keyword %k for KEYWORDS line %d for DESCRIPTION line %c for CREATOR line %l for Language keyword %L for capitalized language keyword %D for DATE keyword If you need to use a "%" character, you need to escape it like that: "%%". As a special case, a nil value prevents template from being inserted. Setting :latex-hyperref-template in publishing projects will take precedence over this variable. ## org-src-block-faces (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-src-block-faces :END: Alist of faces to be used for source-block. Each element is a cell of the format ("language" FACE) Where FACE is either a defined face or an anonymous face. For instance, the following value would color the background of emacs-lisp source blocks and python source blocks in purple and green, respectability. \='(("emacs-lisp" (:background "#EEE2FF")) ("python" (:background "#e5ffb8"))) :PROPERTIES: :CUSTOM_ID: org-context-in-file-links :END: Non-nil means file links from org-store-link' contain context. \ A search string will be added to the file name with :: as separator and used to find the context when the link is activated by the command org-open-at-point'. When this option is t, the entire active region will be placed in the search string of the file link. If set to a positive integer, only the first n lines of context will be stored. Using a prefix arg to the command org-store-link' (\[universal-argument] \[org-store-link]') negates this setting for the duration of the command. ## org-indent-mode-turns-on-hiding-stars (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-indent-mode-turns-on-hiding-stars :END: Non-nil means setting the variable org-indent-mode' will turn on org-hide-leading-stars'. ## org-mobile-directory (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-mobile-directory :END: The WebDAV directory where the interaction with the mobile takes place. ## org-export-select-tags (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-select-tags :END: Tags that select a tree for export. If any such tag is found in a buffer, all trees that do not carry one of these tags will be ignored during export. Inside trees that are selected like this, you can still deselect a subtree by tagging it with one of the org-export-exclude-tags'. This option can also be set with the SELECT_TAGS keyword. ## org-clocktable-defaults (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clocktable-defaults :END: Default properties for clock tables. ## org-koma-letter-use-place t :PROPERTIES: :CUSTOM_ID: org-koma-letter-use-place :END: Non-nil prints the letter's place next to the date. This option can also be set with the OPTIONS keyword, e.g.: "place:nil". ## org-koma-letter-signature "" :PROPERTIES: :CUSTOM_ID: org-koma-letter-signature :END: Signature, as a string. This option can also be set with the SIGNATURE keyword. Moreover, when: (1) Either org-koma-letter-prefer-special-headings' is non-nil or there is no CLOSING keyword or the CLOSING keyword is empty; (2) org-koma-letter-headline-is-opening-maybe' is non-nil; (3) the letter contains a headline with the special tag "closing"; then the signature will be set as the content of the closing special heading. Note if the content is empty the signature will not be set. ## org-icalendar-store-UID (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-icalendar-store-UID :END: Non-nil means store any created UIDs in properties. The iCalendar standard requires that all entries have a unique identifier. Org will create these identifiers as needed. When this variable is non-nil, the created UIDs will be stored in the ID property of the entry. Then the next time this entry is exported, it will be exported with the same UID, superseding the previous form of it. This is essential for synchronization services. This variable is not turned on by default because we want to avoid creating a property drawer in every entry if people are only playing with this feature, or if they are only using it locally. ## org-bbdb-anniversary-format-alist (funcall (function (closure (d... :PROPERTIES: :CUSTOM_ID: org-bbdb-anniversary-format-alist :END: How different types of anniversaries should be formatted. An alist of elements (STRING . FORMAT) where STRING is the name of an anniversary class and format is either: 1) A format string with the following substitutions (in order): - the name of the record containing this anniversary - the number of years - an ordinal suffix (st, nd, rd, th) for the year 2) A function to be called with three arguments: NAME YEARS SUFFIX (string int string) returning a string for the diary or nil. 3) An Emacs Lisp form that should evaluate to a string (or nil) in the scope of variables NAME, YEARS and SUFFIX (among others). ## org-list-use-circular-motion (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-list-use-circular-motion :END: Non-nil means commands implying motion in lists should be cyclic. \ In that case, the item following the last item is the first one, and the item preceding the first item is the last one. This affects the behavior of \[org-move-item-up]', \[org-move-item-down]', \[org-next-item]', \[org-previous-item]'. ## org-html-mathjax-options (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-mathjax-options :END: Options for MathJax setup. Alist of the following elements. All values are strings. path The path to MathJax. scale Scaling with HTML-CSS, MathML and SVG output engines. align How to align display math: left, center, or right. font The font to use with HTML-CSS and SVG output. As of MathJax 2.5 the following values are understood: "TeX", "STIX-Web", "Asana-Math", "Neo-Euler", "Gyre-Pagella", "Gyre-Termes", and "Latin-Modern". linebreaks Let MathJax perform automatic linebreaks. Valid values are "true" and "false". indent If align is not center, how far from the left/right side? Valid values are "left" and "right" multlinewidth The width of the multline environment. autonumber How to number equations. Valid values are "None", "all" and "AMS Math". tagindent The amount tags are indented. tagside Which side to show tags/labels on. Valid values are "left" and "right" You can also customize this for each buffer, using something like #+HTML_MATHJAX: align: left indent: 5em tagside: left font: Neo-Euler For further information about MathJax options, see the MathJax documentation: http://docs.mathjax.org/ ## org-stuck-projects (quote ("+LEVEL=2/-DONE" ("TOD... :PROPERTIES: :CUSTOM_ID: org-stuck-projects :END: How to identify stuck projects. This is a list of four items: 1. A tags/todo/property matcher string that is used to identify a project. See the manual for a description of tag and property searches. The entire tree below a headline matched by this is considered one project. 2. A list of TODO keywords identifying non-stuck projects. If the project subtree contains any headline with one of these todo keywords, the project is considered to be not stuck. If you specify "*" as a keyword, any TODO keyword will mark the project unstuck. 3. A list of tags identifying non-stuck projects. If the project subtree contains any headline with one of these tags, the project is considered to be not stuck. If you specify "*" as a tag, any tag will mark the project unstuck. Note that this is about the explicit presence of a tag somewhere in the subtree, inherited tags do not count here. If inherited tags make a project not stuck, use "-TAG" in the tags part of the matcher under (1.) above. 4. An arbitrary regular expression matching non-stuck projects. If the project turns out to be not stuck, search continues also in the subtree to see if any of the subtasks have project status. See also the variable org-tags-match-list-sublevels' which applies to projects matched by this search as well. After defining this variable, you may use \[org-agenda-list-stuck-projects]' (bound to C-c a #') to produce the list. ## org-latex-default-table-mode (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-default-table-mode :END: Default mode for tables. Value can be a symbol among: table' Regular LaTeX table. math' In this mode, every cell is considered as being in math mode and the complete table will be wrapped within a math environment. It is particularly useful to write matrices. inline-math' This mode is almost the same as math', but the math environment will be inlined. verbatim' The table is exported as it appears in the Org buffer, within a verbatim environment. This value can be overridden locally with, i.e. ":mode math" in LaTeX attributes. When modifying this variable, it may be useful to change org-latex-default-table-environment' accordingly. ## org-clock-rounding-minutes (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-rounding-minutes :END: Rounding minutes when clocking in or out. The default value is 0 so that no rounding is done. When set to a non-integer value, use the car of org-time-stamp-rounding-minutes', like for setting a time-stamp. E.g. if org-clock-rounding-minutes' is set to 5, time is 14:47 and you clock in: then the clock starts at 14:45. If you clock out within the next 5 minutes, the clock line will be removed; if you clock out 8 minutes after your clocked in, the clock out time will be 14:50. ## org-babel-load-languages (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-babel-load-languages :END: Languages which can be evaluated in Org buffers. This list can be used to load support for any of the languages below, note that each language will depend on a different set of system executables and/or Emacs modes. When a language is "loaded", then code blocks in that language can be evaluated with org-babel-execute-src-block' bound by default to C-c C-c (note the org-babel-no-eval-on-ctrl-c-ctrl-c' variable can be set to remove code block evaluation from the C-c C-c keybinding. By default only Emacs Lisp (which has no requirements) is loaded. ## org-agenda-time-grid (quote ((daily today require-t... :PROPERTIES: :CUSTOM_ID: org-agenda-time-grid :END: The settings for time grid for agenda display. This is a list of three items. The first item is again a list. It contains symbols specifying conditions when the grid should be displayed: daily if the agenda shows a single day weekly if the agenda shows an entire week today show grid on current date, independent of daily/weekly display require-timed show grid only if at least one item has a time specification remove-match skip grid times already present in an entry The second item is a string which will be placed behind the grid time. The third item is a list of integers, indicating the times that should have a grid line. ## org-export-with-entities (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-entities :END: Non-nil means interpret entities when exporting. For example, HTML export converts \alpha to α and \AA to Å. For a list of supported names, see the constant org-entities' and the user option org-entities-user'. This option can also be set with the OPTIONS keyword, e.g. "e:nil". ## org-texinfo-info-process (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-texinfo-info-process :END: Commands to process a Texinfo file to an INFO file. This is a list of strings, each of them will be given to the shell as a command. %f in the command will be replaced by the relative file name, %F by the absolute file name, %b by the file base name (i.e. without directory and extension parts), %o by the base directory of the file and %O by the absolute file name of the output file. ## org-bibtex-type-property-name (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-bibtex-type-property-name :END: Property in which to store bibtex entry type (e.g., article). ## org-table-auto-blank-field (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-auto-blank-field :END: Non-nil means automatically blank table field when starting to type into it. This only happens when typing immediately after a field motion command (TAB, S-TAB or RET). Only relevant when org-enable-table-editor' is equal to optimized'. ## org-timer-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-timer-format :END: The format to insert the time of the timer. This format must contain one instance of "%s" which will be replaced by the value of the timer. ## org-agenda-skip-scheduled-if-done nil :PROPERTIES: :CUSTOM_ID: org-agenda-skip-scheduled-if-done :END: Non-nil means don't show scheduled items in agenda when they are done. This is relevant for the daily/weekly agenda, not for the TODO list. It applies only to the actual date of the scheduling. Warnings about an item with a past scheduling dates are always turned off when the item is DONE. ## org-tags-column (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-tags-column :END: The column to which tags should be indented in a headline. If this number is positive, it specifies the column. If it is negative, it means that the tags should be flushright to that column. For example, -80 works well for a normal 80 character screen. When 0, place tags directly after headline text, with only one space in between. ## org-agenda-timegrid-use-ampm nil :PROPERTIES: :CUSTOM_ID: org-agenda-timegrid-use-ampm :END: When set, show AM/PM style timestamps on the timegrid. ## org-babel-results-keyword (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-results-keyword :END: Keyword used to name results generated by code blocks. It should be "RESULTS". However any capitalization may be used. ## org-odt-convert-process (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-odt-convert-process :END: Use this converter to convert from "odt" format to other formats. During customization, the list of converter names are populated from org-odt-convert-processes'. ## org-beamer-subtitle-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-beamer-subtitle-format :END: Format string used for transcoded subtitle. The format string should have at most one "%s"-expression, which is replaced with the subtitle. ## org-ascii-format-inlinetask-function (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-ascii-format-inlinetask-function :END: Function called to format an inlinetask in ASCII. The function must accept nine parameters: TODO the todo keyword, as a string TODO-TYPE the todo type, a symbol among todo', done' and nil. PRIORITY the inlinetask priority, as a string NAME the inlinetask name, as a string. TAGS the inlinetask tags, as a list of strings. CONTENTS the contents of the inlinetask, as a string. WIDTH the width of the inlinetask, as a number. INLINETASK the inlinetask itself. INFO the info channel. The function should return either the string to be exported or nil to ignore the inline task. ## org-display-custom-times (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-display-custom-times :END: Non-nil means overlay custom formats over all time stamps. The formats are defined through the variable org-time-stamp-custom-formats'. To turn this on on a per-file basis, insert anywhere in the file: #+STARTUP: customtime ## org-table-tab-jumps-over-hlines (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-tab-jumps-over-hlines :END: Non-nil means tab in the last column of a table with jump over a hline. If a horizontal separator line is following the current line, org-table-next-field' can either create a new row before that line, or jump over the line. When this option is nil, a new line will be created before this line. ## org-log-states-order-reversed (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-log-states-order-reversed :END: Non-nil means the latest state note will be directly after heading. When nil, the state change notes will be ordered according to time. This option can also be set with on a per-file-basis with #+STARTUP: logstatesreversed #+STARTUP: nologstatesreversed ## org-babel-python-mode (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-python-mode :END: Preferred python mode for use in running python interactively. This will typically be either python' or python-mode'. ## org-clock-out-switch-to-state (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-out-switch-to-state :END: Set task to a special todo state after clocking out. The value should be the state to which the entry should be switched. If the value is a function, it must take one parameter (the current TODO state of the item) and return the state to switch it to. ## org-agenda-show-outline-path t :PROPERTIES: :CUSTOM_ID: org-agenda-show-outline-path :END: Non-nil means show outline path in echo area after line motion. ## org-html-postamble (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-postamble :END: Non-nil means insert a postamble in HTML export. When set to auto', check against the org-export-with-author/email/creator/date' variables to set the content of the postamble. When set to a string, use this string as the postamble. When t, insert a string as defined by the formatting string in org-html-postamble-format'. When set to a function, apply this function and insert the returned string. The function takes the property list of export options as its only argument. Setting :html-postamble in publishing projects will take precedence over this variable. :PROPERTIES: :CUSTOM_ID: org-gnus-prefer-web-links :END: If non-nil, org-store-link' creates web links to Google groups or Gmane. \When nil, Gnus will be used for such links. Using a prefix argument to the command \[org-store-link]' (org-store-link') negates this setting for the duration of the command. ## org-export-async-init-file (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-async-init-file :END: File used to initialize external export process. Value must be either nil or an absolute file name. When nil, the external process is launched like a regular Emacs session, loading user's initialization file and any site specific configuration. If a file is provided, it, and only it, is loaded at start-up. Therefore, using a specific configuration makes the process to load faster and the export more portable. ## org-use-property-inheritance (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-use-property-inheritance :END: Non-nil means properties apply also for sublevels. This setting is chiefly used during property searches. Turning it on can cause significant overhead when doing a search, which is why it is not on by default. When nil, only the properties directly given in the current entry count. When t, every property is inherited. The value may also be a list of properties that should have inheritance, or a regular expression matching properties that should be inherited. However, note that some special properties use inheritance under special circumstances (not in searches). Examples are CATEGORY, ARCHIVE, COLUMNS, and the properties ending in "_ALL" when they are used as descriptor for valid values of a property. Note for programmers: When querying an entry with org-entry-get', you can control if inheritance should be used. By default, org-entry-get' looks only at the local properties. You can request inheritance by setting the inherit argument to t (to force inheritance) or to selective' (to respect the setting in this variable). ## org-tag-alist (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-tag-alist :END: Default tags available in Org files. The value of this variable is an alist. Associations either: (TAG) (TAG . SELECT) (SPECIAL) where TAG is a tag as a string, SELECT is character, used to select that tag through the fast tag selection interface, and SPECIAL is one of the following keywords: :startgroup', :startgrouptag', :grouptags', :engroup', :endgrouptag' or :newline'. These keywords are used to define a hierarchy of tags. See manual for details. When this variable is nil, Org mode bases tag input on what is already in the buffer. The value can be overridden locally by using a TAGS keyword, e.g., #+TAGS: tag1 tag2 See also org-tag-persistent-alist' to sidestep this behavior. ## org-odt-prettify-xml (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-odt-prettify-xml :END: Specify whether or not the xml output should be prettified. When this option is turned on, indent-region' is run on all component xml buffers before they are saved. Turn this off for regular use. Turn this on if you need to examine the xml visually. ## org-agenda-prefix-format (quote ((agenda . " %i %-12:c%... :PROPERTIES: :CUSTOM_ID: org-agenda-prefix-format :END: Format specifications for the prefix of items in the agenda views. An alist with five entries, each for the different agenda types. The keys of the sublists are agenda', timeline', todo', search' and tags'. The values are format strings. This format works similar to a printf format, with the following meaning: %c the category of the item, "Diary" for entries from the diary, or as given by the CATEGORY keyword or derived from the file name %e the effort required by the item %l the level of the item (insert X space(s) if item is of level X) %i the icon category of the item, see org-agenda-category-icon-alist' %T the last tag of the item (ignore inherited tags, which come first) %t the HH:MM time-of-day specification if one applies to the entry %s Scheduling/Deadline information, a short string %b show breadcrumbs, i.e., the names of the higher levels %(expression) Eval EXPRESSION and replace the control string by the result All specifiers work basically like the standard %s' of printf, but may contain two additional characters: a question mark just after the %' and a whitespace/punctuation character just before the final letter. If the first character after %' is a question mark, the entire field will only be included if the corresponding value applies to the current entry. This is useful for fields which should have fixed width when present, but zero width when absent. For example, "%?-12t" will result in a 12 character time field if a time of the day is specified, but will completely disappear in entries which do not contain a time. If there is punctuation or whitespace character just before the final format letter, this character will be appended to the field value if the value is not empty. For example, the format "%-12:c" leads to "Diary: " if the category is "Diary". If the category is empty, no additional colon is inserted. The default value for the agenda sublist is " %-12:c%?-12t% s", which means: - Indent the line with two space characters - Give the category a 12 chars wide field, padded with whitespace on the right (because of -'). Append a colon if there is a category (because of :'). - If there is a time-of-day, put it into a 12 chars wide field. If no time, don't put in an empty field, just skip it (because of '?'). - Finally, put the scheduling information. See also the variables org-agenda-remove-times-when-in-prefix' and org-agenda-remove-tags'. Custom commands can set this variable in the options section. ## org-agenda-search-view-max-outline-level 0 :PROPERTIES: :CUSTOM_ID: org-agenda-search-view-max-outline-level :END: Maximum outline level to display in search view. E.g. when this is set to 1, the search view will only show headlines of level 1. When set to 0, the default value, don't limit agenda view by outline level. ## org-agenda-show-all-dates t :PROPERTIES: :CUSTOM_ID: org-agenda-show-all-dates :END: Non-nil means org-agenda' shows every day in the selected range. When nil, only the days which actually have entries are shown. ## org-id-uuid-program (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-id-uuid-program :END: The uuidgen program. ## org-refile-active-region-within-subtree (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-refile-active-region-within-subtree :END: Non-nil means also refile active region within a subtree. By default org-refile' doesn't allow refiling regions if they don't contain a set of subtrees, but it might be convenient to do so sometimes: in that case, the first line of the region is converted to a headline before refiling. ## org-export-with-title (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-title :END: Non-nil means print title into the exported file. This option can also be set with the OPTIONS keyword, e.g. "title:nil". ## org-export-creator-string (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-creator-string :END: Information about the creator of the document. This option can also be set on with the CREATOR keyword. ## org-texinfo-node-description-column (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-texinfo-node-description-column :END: Column at which to start the description in the node listings. If a node title is greater than this length, the description will be placed after the end of the title. ## org-agenda-skip-timestamp-if-deadline-is-shown nil :PROPERTIES: :CUSTOM_ID: org-agenda-skip-timestamp-if-deadline-is-shown :END: Non-nil means skip timestamp line if same entry shows because of deadline. In the agenda of today, an entry can show up multiple times because it has both a plain timestamp and has a nearby deadline. When this variable is t, then only the deadline is shown and the fact that the entry has a timestamp for or including today is not shown. When this variable is nil, the entry will be shown several times. ## org-allow-promoting-top-level-subtree (funcall (function (closure (b... :PROPERTIES: :CUSTOM_ID: org-allow-promoting-top-level-subtree :END: When non-nil, allow promoting a top level subtree. The leading star of the top level headline will be replaced by a #. ## org-archive-reversed-order (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-archive-reversed-order :END: Non-nil means make the tree first child under the archive heading, not last. :PROPERTIES: :CUSTOM_ID: org-keep-stored-link-after-insertion :END: Non-nil means keep link in list for entire session. \ The command org-store-link' adds a link pointing to the current location to an internal list. These links accumulate during a session. The command org-insert-link' can be used to insert links into any Org file (offering completion for all stored links). When this option is nil, every link which has been inserted once using \[org-insert-link]' will be removed from the list, to make completing the unused links more efficient. ## org-scheduled-delay-days (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-scheduled-delay-days :END: Number of days before a scheduled item becomes active. This variable governs the display in sparse trees and in the agenda. The default value (i.e. 0) means: don't delay scheduled item. When negative, it means use this number (the absolute value of it) even if a scheduled item has a different individual delay time specified. Custom commands can set this variable in the options section. ## org-crypt-tag-matcher (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-crypt-tag-matcher :END: The tag matcher used to find headings whose contents should be encrypted. See the "Match syntax" section of the org manual for more details. ## org-edit-timestamp-down-means-later (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-edit-timestamp-down-means-later :END: Non-nil means S-down will increase the time in a time stamp. When nil, S-up will increase. ## org-ascii-inlinetask-width (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-ascii-inlinetask-width :END: Width of inline tasks, in number of characters. This number ignores any margin. ## org-html-container-element (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-container-element :END: HTML element to use for wrapping top level sections. Can be set with the in-buffer HTML_CONTAINER property or for publishing, with :html-container. Note that changing the default will prevent you from using org-info.js for your website. ## org-babel-noweb-wrap-end (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-noweb-wrap-end :END: String used to end a noweb reference in a code block. See also org-babel-noweb-wrap-start'. ## org-odt-create-custom-styles-for-srcblocks (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-odt-create-custom-styles-for-srcblocks :END: Whether custom styles for colorized source blocks be automatically created. When this option is turned on, the exporter creates custom styles for source blocks based on the advice of htmlfontify'. Creation of custom styles happen as part of org-odt-hfy-face-to-css'. When this option is turned off exporter does not create such styles. Use the latter option if you do not want the custom styles to be based on your current display settings. It is necessary that the styles.xml already contains needed styles for colorizing to work. This variable is effective only if org-odt-fontify-srcblocks' is turned on. ## org-export-with-special-strings (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-special-strings :END: Non-nil means interpret "\-", "--" and "---" for export. When this option is turned on, these strings will be exported as: Org HTML LaTeX UTF-8 -----+----------+--------+------- \- ­ \- -- – -- – --- — --- — ... … \ldots … This option can also be set with the OPTIONS keyword, e.g. "-:nil". ## org-indirect-buffer-display (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-indirect-buffer-display :END: How should indirect tree buffers be displayed? This applies to indirect buffers created with the commands org-tree-to-indirect-buffer' and org-agenda-tree-to-indirect-buffer'. Valid values are: current-window Display in the current window other-window Just display in another window. dedicated-frame Create one new frame, and re-use it each time. new-frame Make a new frame each time. Note that in this case previously-made indirect buffers are kept, and you need to kill these buffers yourself. ## org-html-infojs-template (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-infojs-template :END: The template for the export style additions when org-info.js is used. Option settings will replace the %MANAGER-OPTIONS cookie. ## org-deadline-warning-days (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-deadline-warning-days :END: Number of days before expiration during which a deadline becomes active. This variable governs the display in sparse trees and in the agenda. When 0 or negative, it means use this number (the absolute value of it) even if a deadline has a different individual lead time specified. Custom commands can set this variable in the options section. ## org-use-sub-superscripts (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-use-sub-superscripts :END: Non-nil means interpret "_" and "^" for display. If you want to control how Org exports those characters, see org-export-with-sub-superscripts'. org-use-sub-superscripts' used to be an alias for org-export-with-sub-superscripts' in Org <8.0, it is not anymore. When this option is turned on, you can use TeX-like syntax for sub- and superscripts within the buffer. Several characters after "_" or "^" will be considered as a single item - so grouping with {} is normally not needed. For example, the following things will be parsed as single sub- or superscripts: 10^24 or 10^tau several digits will be considered 1 item. 10^-12 or 10^-tau a leading sign with digits or a word x^2-y^3 will be read as x^2 - y^3, because items are terminated by almost any nonword/nondigit char. x_{i^2} or x^(2-i) braces or parenthesis do grouping. Still, ambiguity is possible. So when in doubt, use {} to enclose the sub/superscript. If you set this variable to the symbol {}', the braces are *required* in order to trigger interpretations as sub/superscript. This can be helpful in documents that need "_" frequently in plain text. ## org-agenda-insert-diary-extract-time nil :PROPERTIES: :CUSTOM_ID: org-agenda-insert-diary-extract-time :END: Non-nil means extract any time specification from the diary entry. ## org-html-footnote-format (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-footnote-format :END: The format for the footnote reference. %s will be replaced by the footnote reference itself. ## org-texinfo-remove-logfiles (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-texinfo-remove-logfiles :END: Non-nil means remove the logfiles produced by compiling a Texinfo file. By default, logfiles are files with these extensions: .aux, .toc, .cp, .fn, .ky, .pg and .tp. To define the set of logfiles to remove, set org-texinfo-logfiles-extensions'. ## org-html-format-headline-function (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-format-headline-function :END: Function to format headline text. This function will be called with six arguments: TODO the todo keyword (string or nil). TODO-TYPE the type of todo (symbol: todo', done', nil) PRIORITY the priority of the headline (integer or nil) TEXT the main headline text (string). TAGS the tags (string or nil). INFO the export options (plist). The function result will be used in the section format string. ## org-archive-file-header-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-archive-file-header-format :END: The header format string for newly created archive files. When nil, no header will be inserted. When a string, a %s formatter will be replaced by the file name. ## org-protocol-default-template-key (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-protocol-default-template-key :END: The default template key to use. This is usually a single character string but can also be a string with two characters. ## org-latex-known-warnings (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-known-warnings :END: Alist of regular expressions and associated messages for the user. The regular expressions are used to find possible warnings in the log of a latex-run. These warnings will be reported after calling org-latex-compile'. ## org-clock-clocktable-formatter (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-clocktable-formatter :END: Function to turn clocking data into a table. For more information, see org-clocktable-write-default'. ## org-bibtex-tags (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-bibtex-tags :END: List of tag(s) that should be added to new bib entries. ## org-lowest-priority (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-lowest-priority :END: The lowest priority of TODO items. A character like ?A, ?B etc. Must have a larger ASCII number than org-highest-priority'. ## org-agenda-log-mode-add-notes t :PROPERTIES: :CUSTOM_ID: org-agenda-log-mode-add-notes :END: Non-nil means add first line of notes to log entries in agenda views. If a log item like a state change or a clock entry is associated with notes, the first line of these notes will be added to the entry in the agenda display. ## org-pretty-entities (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-pretty-entities :END: Non-nil means show entities as UTF8 characters. When nil, the \name form remains in the buffer. ## org-ascii-list-margin (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-ascii-list-margin :END: Width of margin used for plain lists, in characters. This margin applies to top level list only, not to its sub-lists. ## org-id-track-globally (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-id-track-globally :END: Non-nil means track IDs through files, so that links work globally. This work by maintaining a hash table for IDs and writing this table to disk when exiting Emacs. Because of this, it works best if you use a single Emacs process, not many. When nil, IDs are not tracked. Links to IDs will still work within a buffer, but not if the entry is located in another file. IDs can still be used if the entry with the id is in the same file as the link. ## org-publish-sitemap-file-entry-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-publish-sitemap-file-entry-format :END: Format string for site-map file entry. You could use brackets to delimit on what part the link will be. %t is the title. %a is the author. %d is the date formatted using org-publish-sitemap-date-format'. ## org-babel-latex-htlatex-packages (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-latex-htlatex-packages :END: Packages to use for htlatex export. ## org-export-coding-system (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-coding-system :END: Coding system for the exported file. ## org-texinfo-inactive-timestamp-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-texinfo-inactive-timestamp-format :END: A printf format string to be applied to inactive timestamps. ## org-habit-show-habits-only-for-today (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-habit-show-habits-only-for-today :END: If non-nil, only show habits on today's agenda, and not for future days. Note that even when shown for future days, the graph is always relative to the current effective date. ## org-ascii-table-use-ascii-art (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-ascii-table-use-ascii-art :END: Non-nil means table.el tables are turned into ascii-art. It only makes sense when export charset is utf-8'. It is nil by default since it requires ascii-art-to-unicode.el package. You can download it here: http://gnuvola.org/software/j/aa2u/ascii-art-to-unicode.el. ## org-html-head-include-scripts (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-head-include-scripts :END: Non-nil means include the JavaScript snippets in exported HTML files. The actual script is defined in org-html-scripts' and should not be modified. ## org-todo-state-tags-triggers (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-todo-state-tags-triggers :END: Tag changes that should be triggered by TODO state changes. This is a list. Each entry is (state-change (tag . flag) .......) State-change can be a string with a state, and empty string to indicate the state that has no TODO keyword, or it can be one of the symbols todo' or done', meaning any not-done or done state, respectively. ## org-babel-C++-compiler (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-C++-compiler :END: Command used to compile a C++ source code file into an executable. May be either a command in the path, like g++ or an absolute path name, like /usr/local/bin/g++ parameter may be used, like g++ -v :PROPERTIES: :CUSTOM_ID: org-texinfo-link-with-unknown-path-format :END: Format string for links with unknown path type. ## org-table-copy-increment (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-copy-increment :END: Non-nil means increment when copying current field with \[org-table-copy-down]'. ## org-treat-insert-todo-heading-as-state-change (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-treat-insert-todo-heading-as-state-change :END: Non-nil means inserting a TODO heading is treated as state change. So when the command \[org-insert-todo-heading]' is used, state change logging will apply if appropriate. When nil, the new TODO item will be inserted directly, and no logging will take place. ## org-rss-image-url "https://orgmode.org/img/org-mo... :PROPERTIES: :CUSTOM_ID: org-rss-image-url :END: The URL of the an image for the RSS feed. ## org-latex-images-centered (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-images-centered :END: When non-nil, images are centered. ## org-occur-case-fold-search (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-occur-case-fold-search :END: Non-nil means org-occur' should be case-insensitive. If set to smart' the search will be case-insensitive only if it doesn't specify any upper case character. ## org-duration-units (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-duration-units :END: Conversion factor to minutes for a duration. Each entry has the form (UNIT . MODIFIER). In a duration string, a number followed by UNIT is multiplied by the specified number of MODIFIER to obtain a duration in minutes. For example, the following value \=(("min" . 1) ("h" . 60) ("d" . ,(* 60 8)) ("w" . ,(* 60 8 5)) ("m" . ,(* 60 8 5 4)) ("y" . ,(* 60 8 5 4 10))) is meaningful if you work an average of 8 hours per day, 5 days a week, 4 weeks a month and 10 months a year. When setting this variable outside the Customize interface, make sure to call the following command: \[org-duration-set-regexps] ## org-man-source-highlight (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-man-source-highlight :END: Use GNU source highlight to embellish source blocks ## org-table-formula-evaluate-inline (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-formula-evaluate-inline :END: Non-nil means TAB and RET evaluate a formula in current table field. If the current field starts with an equal sign, it is assumed to be a formula which should be evaluated as described in the manual and in the documentation string of the command org-table-eval-formula'. This feature requires the Emacs calc package. When this variable is nil, formula calculation is only available through the command \[org-table-eval-formula]'. ## org-capture-templates (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-capture-templates :END: Templates for the creation of new entries. Each entry is a list with the following items: keys The keys that will select the template, as a string, characters only, for example "a" for a template to be selected with a single key, or "bt" for selection with two keys. When using several keys, keys using the same prefix key must be together in the list and preceded by a 2-element entry explaining the prefix key, for example ("b" "Templates for marking stuff to buy") The "C" key is used by default for quick access to the customization of the template variable. But if you want to use that key for a template, you can. description A short string describing the template, will be shown during selection. type The type of entry. Valid types are: entry an Org node, with a headline. Will be filed as the child of the target entry or as a top-level entry. item a plain list item, will be placed in the first plain list at the target location. checkitem a checkbox item. This differs from the plain list item only is so far as it uses a different default template. table-line a new line in the first table at target location. plain text to be inserted as it is. target Specification of where the captured item should be placed. In Org files, targets usually define a node. Entries will become children of this node, other types will be added to the table or list in the body of this node. Most target specifications contain a file name. If that file name is the empty string, it defaults to org-default-notes-file'. A file can also be given as a variable or as a function called with no argument. When an absolute path is not specified for a target, it is taken as relative to org-directory'. Valid values are: (file "path/to/file") Text will be placed at the beginning or end of that file (id "id of existing Org entry") File as child of this entry, or in the body of the entry (file+headline "path/to/file" "node headline") Fast configuration if the target heading is unique in the file (file+olp "path/to/file" "Level 1 heading" "Level 2" ...) For non-unique headings, the full outline path is safer (file+regexp "path/to/file" "regexp to find location") File to the entry matching regexp (file+olp+datetree "path/to/file" "Level 1 heading" ...) Will create a heading in a date tree for today's date. If no heading is given, the tree will be on top level. To prompt for date instead of using TODAY, use the :time-prompt property. To create a week-tree, use the :tree-type property. (file+function "path/to/file" function-finding-location) A function to find the right location in the file (clock) File to the entry that is currently being clocked (function function-finding-location) Most general way: write your own function which both visits the file and moves point to the right location template The template for creating the capture item. If you leave this empty, an appropriate default template will be used. See below for more details. Instead of a string, this may also be one of (file "/path/to/template-file") (function function-returning-the-template) in order to get a template from a file, or dynamically from a function. The rest of the entry is a property list of additional options. Recognized properties are: :prepend Normally newly captured information will be appended at the target location (last child, last table line, last list item...). Setting this property will change that. :immediate-finish When set, do not offer to edit the information, just file it away immediately. This makes sense if the template only needs information that can be added automatically. :jump-to-captured When set, jump to the captured entry when finished. :empty-lines Set this to the number of lines the should be inserted before and after the new item. Default 0, only common other value is 1. :empty-lines-before Set this to the number of lines the should be inserted before the new item. Overrides :empty-lines for the number lines inserted before. :empty-lines-after Set this to the number of lines the should be inserted after the new item. Overrides :empty-lines for the number of lines inserted after. :clock-in Start the clock in this item. :clock-keep Keep the clock running when filing the captured entry. :clock-resume Start the interrupted clock when finishing the capture. Note that :clock-keep has precedence over :clock-resume. When setting both to t, the current clock will run and the previous one will not be resumed. :time-prompt Prompt for a date/time to be used for date/week trees and when filling the template. :tree-type When week', make a week tree instead of the month tree. :unnarrowed Do not narrow the target buffer, simply show the full buffer. Default is to narrow it so that you only see the new stuff. :table-line-pos Specification of the location in the table where the new line should be inserted. It should be a string like "II-3", meaning that the new line should become the third line before the second horizontal separator line. :kill-buffer If the target file was not yet visited by a buffer when capture was invoked, kill the buffer again after capture is finalized. The template defines the text to be inserted. Often this is an Org mode entry (so the first line should start with a star) that will be filed as a child of the target headline. It can also be freely formatted text. Furthermore, the following %-escapes will be replaced with content and expanded: %[pathname] Insert the contents of the file given by pathname'. These placeholders are expanded at the very beginning of the process so they can be used to extend the current template. %(sexp) Evaluate elisp (sexp)' and replace it with the results. Only placeholders pre-existing within the template, or introduced with %[pathname] are expanded this way. Since this happens after expanding non-interactive %-escapes, those can be used to fill the expression. %<...> The result of format-time-string on the ... format specification. %t Time stamp, date only. %T Time stamp with date and time. %u, %U Like the above, but inactive time stamps. %i Initial content, copied from the active region. If %i is indented, the entire inserted text will be indented as well. %a Annotation, normally the link created with org-store-link'. %A Like %a, but prompt for the description part. %l Like %a, but only insert the literal link. %c Current kill ring head. %x Content of the X clipboard. %k Title of currently clocked task. %K Link to currently clocked task. %n User name (taken from the variable user-full-name'). %f File visited by current buffer when org-capture was called. %F Full path of the file or directory visited by current buffer. %:keyword Specific information for certain link types, see below. %^g Prompt for tags, with completion on tags in target file. %^G Prompt for tags, with completion on all tags in all agenda files. %^t Like %t, but prompt for date. Similarly %^T, %^u, %^U. You may define a prompt like: %^{Please specify birthday}t %^C Interactive selection of which kill or clip to use. %^L Like %^C, but insert as link. %^{prop}p Prompt the user for a value for property prop'. %^{prompt} Prompt the user for a string and replace this sequence with it. A default value and a completion table ca be specified like this: %^{prompt|default|completion2|completion3|...}. %? After completing the template, position cursor here. %\1 ... %\N Insert the text entered at the nth %^{prompt}, where N is a number, starting from 1. Apart from these general escapes, you can access information specific to the link type that is created. For example, calling org-capture' in emails or in Gnus will record the author and the subject of the message, which you can access with "%:from" and "%:subject", respectively. Here is a complete list of what is recorded for each link type. Link type | Available information ------------------------+------------------------------------------------------ bbdb | %:type %:name %:company vm, wl, mh, mew, rmail, | %:type %:subject %:message-id gnus | %:from %:fromname %:fromaddress | %:to %:toname %:toaddress | %:fromto (either "to NAME" or "from NAME") | %:date %:date-timestamp (as active timestamp) | %:date-timestamp-inactive (as inactive timestamp) gnus | %:group, for messages also all email fields eww, w3, w3m | %:type %:url info | %:type %:file %:node calendar | %:type %:date When you need to insert a literal percent sign in the template, you can escape ambiguous cases with a backward slash, e.g., \%i. ## org-latex-packages-alist (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-latex-packages-alist :END: Alist of packages to be inserted in every LaTeX header. These will be inserted after org-latex-default-packages-alist'. Each element is either a cell or a string. A cell is of the format: ("options" "package" SNIPPET-FLAG) SNIPPET-FLAG, when non-nil, indicates that this package is also needed when turning LaTeX snippets into images for inclusion into non-LaTeX output. A string will be inserted as-is in the header of the document. Make sure that you only list packages here which: - you want in every file; - do not conflict with the setup in org-format-latex-header'; - do not conflict with the default packages in org-latex-default-packages-alist'. ## org-latex-title-command (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-title-command :END: The command used to insert the title just after \begin{document}. This format string may contain these elements: %a for AUTHOR keyword %t for TITLE keyword %s for SUBTITLE keyword %k for KEYWORDS line %d for DESCRIPTION line %c for CREATOR line %l for Language keyword %L for capitalized language keyword %D for DATE keyword If you need to use a "%" character, you need to escape it like that: "%%". Setting :latex-title-command in publishing projects will take precedence over this variable. ## org-bibtex-tags-are-keywords (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-bibtex-tags-are-keywords :END: Convert the value of the keywords field to tags and vice versa. When non-nil, comma-separated entries in a bibtex entry's keywords field will be converted to Org tags. Note: spaces will be escaped with underscores, and characters that are not permitted in Org tags will be removed. When non-nil, local tags in an Org entry will be exported as a comma-separated string of keywords when exported to bibtex. If org-bibtex-inherit-tags' is non-nil, inherited tags will also be exported as keywords. Tags defined in org-bibtex-tags' or org-bibtex-no-export-tags' will not be exported. ## org-html-home/up-format (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-home/up-format :END: Snippet used to insert the HOME and UP links. This is a format string, the first %s will receive the UP link, the second the HOME link. If both org-html-link-up' and org-html-link-home' are empty, the entire snippet will be ignored. ## org-mobile-checksum-binary (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-mobile-checksum-binary :END: Executable used for computing checksums of agenda files. ## org-clock-mode-line-total (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-mode-line-total :END: Default setting for the time included for the mode line clock. This can be overruled locally using the CLOCK_MODELINE_TOTAL property. Allowed values are: current Only the time in the current instance of the clock today All time clocked into this task today repeat All time clocked into this task since last repeat all All time ever recorded for this task auto Automatically, either all', or repeat' for repeating tasks ## org-structure-template-alist (funcall (function (closure (a... :PROPERTIES: :CUSTOM_ID: org-structure-template-alist :END: Structure completion elements. This is a list of abbreviation keys and values. The value gets inserted if you type <' followed by the key and then press the completion key, usually TAB'. %file will be replaced by a file name after prompting for the file using completion. The cursor will be placed at the position of the ?' in the template. There are two templates for each key, the first uses the original Org syntax, the second uses Emacs Muse-like syntax tags. These Muse-like tags become the default when the /org-mtags.el/ module has been loaded. See also the variable org-mtags-prefer-muse-templates'. ## orgtbl-radio-table-templates (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: orgtbl-radio-table-templates :END: Templates for radio tables in different major modes. Each template must define lines that will be treated as a comment and that must contain the "BEGIN RECEIVE ORGTBL %n" and "END RECEIVE ORGTBL" lines where "%n" will be replaced with the name of the table during insertion of the template. The transformed table will later be inserted between these lines. The template should also contain a minimal table in a multiline comment. If multiline comments are not possible in the buffer language, you can pack it into a string that will not be used when the code is compiled or executed. Above the table will you need a line with the fixed string "#+ORGTBL: SEND", followed by instruction on how to convert the table into a data structure useful in the language of the buffer. Check the manual for the section on "Translator functions", and more generally check out https://orgmode.org/manual/Tables-in-arbitrary-syntax.html#Tables-in-arbitrary-syntax All occurrences of %n in a template will be replaced with the name of the table, obtained by prompting the user. ## org-odt-use-date-fields (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-odt-use-date-fields :END: Non-nil, if timestamps should be exported as date fields. When nil, export timestamps as plain text. When non-nil, map org-time-stamp-custom-formats' to a pair of OpenDocument date-styles with names "OrgDate1" and "OrgDate2" respectively. A timestamp with no time component is formatted with style "OrgDate1" while one with explicit hour and minutes is formatted with style "OrgDate2". This feature is experimental. Most (but not all) of the common %-specifiers in format-time-string' are supported. Specifically, locale-dependent specifiers like "%c", "%x" are formatted as canonical Org timestamps. For finer control, avoid these %-specifiers. Textual specifiers like "%b", "%h", "%B", "%a", "%A" etc., are displayed by the application in the default language and country specified in org-odt-styles-file'. Note that the default styles file uses language "en" and country "GB". You can localize the week day and month strings in the exported document by setting the default language and country either using the application UI or through a custom styles file. See org-odt--build-date-styles' for implementation details. :PROPERTIES: :CUSTOM_ID: org-email-link-description-format :END: Format of the description part of a link to an email or usenet message. The following %-escapes will be replaced by corresponding information: %F full "From" field %f name, taken from "From" field, address if no name %T full "To" field %t first name in "To" field, address if no name %c correspondent. Usually "from NAME", but if you sent it yourself, it will be "to NAME". See also the variable org-from-is-user-regexp'. %s subject %d date %m message-id. You may use normal field width specification between the % and the letter. This is for example useful to limit the length of the subject. Examples: "%f on: %.30s", "Email from %f", "Email %c" ## org-agenda-inhibit-startup (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-agenda-inhibit-startup :END: Inhibit startup when preparing agenda buffers. When this variable is t, the initialization of the Org agenda buffers is inhibited: e.g. the visibility state is not set, the tables are not re-aligned, etc. ## org-M-RET-may-split-line (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-M-RET-may-split-line :END: Non-nil means M-RET will split the line at the cursor position. When nil, it will go to the end of the line before making a new line. You may also set this option in a different way for different contexts. Valid contexts are: headline when creating a new headline item when creating a new item table in a table field default the value to be used for all contexts not explicitly customized ## org-agenda-show-future-repeats t :PROPERTIES: :CUSTOM_ID: org-agenda-show-future-repeats :END: Non-nil shows repeated entries in the future part of the agenda. When set to the symbol next' only the first future repeat is shown. ## org-koma-letter-author (quote user-full-name) :PROPERTIES: :CUSTOM_ID: org-koma-letter-author :END: Sender's name. This variable defaults to calling the function user-full-name' which just returns the current function user-full-name'. Alternatively a string, nil or a function may be given. Functions must return a string. This option can also be set with the AUTHOR keyword. ## org-bibtex-prefix (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-bibtex-prefix :END: Optional prefix for all bibtex property names. For example setting to BIB_' would allow interoperability with fireforg. ## org-latex-diary-timestamp-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-diary-timestamp-format :END: A printf format string to be applied to diary timestamps. ## org-attach-archive-delete (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-attach-archive-delete :END: Non-nil means attachments are deleted upon archiving a subtree. When set to query', ask the user instead. ## org-html-format-inlinetask-function (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-format-inlinetask-function :END: Function called to format an inlinetask in HTML code. The function must accept seven parameters: TODO the todo keyword, as a string TODO-TYPE the todo type, a symbol among todo', done' and nil. PRIORITY the inlinetask priority, as a string NAME the inlinetask name, as a string. TAGS the inlinetask tags, as a list of strings. CONTENTS the contents of the inlinetask, as a string. INFO the export options, as a plist The function should return the string to be exported. ## org-capture-use-agenda-date (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-capture-use-agenda-date :END: Non-nil means use the date at point when capturing from agendas. When nil, you can still capture using the date at point with \[org-agenda-capture]'. ## org-refile-use-outline-path (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-refile-use-outline-path :END: Non-nil means provide refile targets as paths. So a level 3 headline will be available as level1/level2/level3. When the value is file', also include the file name (without directory) into the path. In this case, you can also stop the completion after the file name, to get entries inserted as top level in the file. When full-file-path', include the full file path. When buffer-name', use the buffer name. ## org-latex-inactive-timestamp-format (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-inactive-timestamp-format :END: A printf format string to be applied to inactive timestamps. ## org-latex-pdf-process (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-pdf-process :END: Commands to process a LaTeX file to a PDF file. This is a list of strings, each of them will be given to the shell as a command. %f in the command will be replaced by the relative file name, %F by the absolute file name, %b by the file base name (i.e. without directory and extension parts), %o by the base directory of the file, %O by the absolute file name of the output file, %latex is the LaTeX compiler (see org-latex-compiler'), and %bib is the BibTeX-like compiler (see org-latex-bib-compiler'). The reason why this is a list is that it usually takes several runs of pdflatex', maybe mixed with a call to bibtex'. Org does not have a clever mechanism to detect which of these commands have to be run to get to a stable result, and it also does not do any error checking. Consider a smart LaTeX compiler such as texi2dvi' or latexmk', which calls the "correct" combinations of auxiliary programs. Alternatively, this may be a Lisp function that does the processing, so you could use this to apply the machinery of AUCTeX or the Emacs LaTeX mode. This function should accept the file name as its single argument. ## org-agenda-entry-text-exclude-regexps nil :PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-exclude-regexps :END: List of regular expressions to clean up entry text. The complete matches of all regular expressions in this list will be removed from entry text before it is shown in the agenda. ## org-latex-listings (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-listings :END: Non-nil means export source code using the listings package. This package will fontify source code, possibly even with color. If you want to use this, you also need to make LaTeX use the listings package, and if you want to have color, the color package. Just add these to org-latex-packages-alist', for example using customize, or with something like: (require \='ox-latex) (add-to-list \='org-latex-packages-alist \='("" "listings")) (add-to-list \='org-latex-packages-alist \='("" "color")) Alternatively, (setq org-latex-listings \='minted) causes source code to be exported using the minted package as opposed to listings. If you want to use minted, you need to add the minted package to org-latex-packages-alist', for example using customize, or with (require \='ox-latex) (add-to-list \='org-latex-packages-alist \='("newfloat" "minted")) In addition, it is necessary to install pygments (http://pygments.org), and to configure the variable org-latex-pdf-process' so that the -shell-escape option is passed to pdflatex. The minted choice has possible repercussions on the preview of latex fragments (see org-preview-latex-fragment'). If you run into previewing problems, please consult https://orgmode.org/worg/org-tutorials/org-latex-preview.html ## org-columns-ellipses (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-columns-ellipses :END: The ellipses to be used when a field in column view is truncated. When this is the empty string, as many characters as possible are shown, but then there will be no visual indication that the field has been truncated. When this is a string of length N, the last N characters of a truncated field are replaced by this string. If the column is narrower than the ellipses string, only part of the ellipses string will be shown. ## org-clock-report-include-clocking-task (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-report-include-clocking-task :END: When non-nil, include the current clocking task time in clock reports. ## org-html-klipsify-src (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-klipsify-src :END: When non-nil, source code blocks are editable in exported presentation. ## org-latex-to-mathml-jar-file (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-latex-to-mathml-jar-file :END: Value of"%j" in org-latex-to-mathml-convert-command'. Use this to specify additional executable file say a jar file. When using MathToWeb as the converter, specify the full-path to your mathtoweb.jar file. ## org-agenda-sorting-strategy (quote ((agenda habit-down tim... :PROPERTIES: :CUSTOM_ID: org-agenda-sorting-strategy :END: Sorting structure for the agenda items of a single day. This is a list of symbols which will be used in sequence to determine if an entry should be listed before another entry. The following symbols are recognized: time-up Put entries with time-of-day indications first, early first time-down Put entries with time-of-day indications first, late first timestamp-up Sort by any timestamp, early first timestamp-down Sort by any timestamp, late first scheduled-up Sort by scheduled timestamp, early first scheduled-down Sort by scheduled timestamp, late first deadline-up Sort by deadline timestamp, early first deadline-down Sort by deadline timestamp, late first ts-up Sort by active timestamp, early first ts-down Sort by active timestamp, late first tsia-up Sort by inactive timestamp, early first tsia-down Sort by inactive timestamp, late first category-keep Keep the default order of categories, corresponding to the sequence in org-agenda-files'. category-up Sort alphabetically by category, A-Z. category-down Sort alphabetically by category, Z-A. tag-up Sort alphabetically by last tag, A-Z. tag-down Sort alphabetically by last tag, Z-A. priority-up Sort numerically by priority, high priority last. priority-down Sort numerically by priority, high priority first. todo-state-up Sort by todo state, tasks that are done last. todo-state-down Sort by todo state, tasks that are done first. effort-up Sort numerically by estimated effort, high effort last. effort-down Sort numerically by estimated effort, high effort first. user-defined-up Sort according to org-agenda-cmp-user-defined', high last. user-defined-down Sort according to org-agenda-cmp-user-defined', high first. habit-up Put entries that are habits first habit-down Put entries that are habits last alpha-up Sort headlines alphabetically alpha-down Sort headlines alphabetically, reversed The different possibilities will be tried in sequence, and testing stops if one comparison returns a "not-equal". For example, the default '(time-up category-keep priority-down) means: Pull out all entries having a specified time of day and sort them, in order to make a time schedule for the current day the first thing in the agenda listing for the day. Of the entries without a time indication, keep the grouped in categories, don't sort the categories, but keep them in the sequence given in org-agenda-files'. Within each category sort by priority. Leaving out category-keep' would mean that items will be sorted across categories by priority. Instead of a single list, this can also be a set of list for specific contents, with a context symbol in the car of the list, any of agenda', todo', tags', search' for the corresponding agenda views. Custom commands can bind this variable in the options section. ## org-inlinetask-show-first-star (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-inlinetask-show-first-star :END: Non-nil means display the first star of an inline task as additional marker. When nil, the first star is not shown. ## org-html-htmlize-font-prefix (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-htmlize-font-prefix :END: The prefix for CSS class names for htmlize font specifications. ## org-texinfo-tables-verbatim (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-texinfo-tables-verbatim :END: When non-nil, tables are exported verbatim. ## org-odt-pixels-per-inch (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-odt-pixels-per-inch :END: Scaling factor for converting images pixels to inches. Use this for sizing of embedded images. See Info node (org) Images in ODT export' for more information. ## org-html-viewport (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-viewport :END: Viewport options for mobile-optimized sites. The following values are recognized width Size of the viewport. initial-scale Zoom level when the page is first loaded. minimum-scale Minimum allowed zoom level. maximum-scale Maximum allowed zoom level. user-scalable Whether zoom can be changed. The viewport meta tag is inserted if this variable is non-nil. See the following site for a reference: https://developer.mozilla.org/en-US/docs/Mozilla/Mobile/Viewport_meta_tag ## org-babel-process-comment-text (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-process-comment-text :END: Function called to process raw Org text collected to be inserted as comments in tangled source-code files. The function should take a single string argument and return a string result. The default value is org-remove-indentation'. ## org-koma-letter-use-phone nil :PROPERTIES: :CUSTOM_ID: org-koma-letter-use-phone :END: Non-nil prints sender's phone number. This option can also be set with the OPTIONS keyword, e.g.: "phone:t". ## org-agenda-tags-todo-honor-ignore-options nil :PROPERTIES: :CUSTOM_ID: org-agenda-tags-todo-honor-ignore-options :END: Non-nil means honor todo-list ignores options also in tags-todo search. The variables org-agenda-todo-ignore-with-date', org-agenda-todo-ignore-timestamp', org-agenda-todo-ignore-scheduled', org-agenda-todo-ignore-deadlines' make the global TODO list skip entries that have time stamps of certain kinds. If this option is set, the same options will also apply for the tags-todo search, which is the general tags/property matcher restricted to unfinished TODO entries only. ## org-agenda-todo-ignore-scheduled nil :PROPERTIES: :CUSTOM_ID: org-agenda-todo-ignore-scheduled :END: Non-nil means, ignore some scheduled TODO items when making TODO list. This applies when creating the global todo list. Valid values are: past Don't show entries scheduled today or in the past. future Don't show entries scheduled in the future. The idea behind this is that by scheduling it, you don't want to think about it until the scheduled date. all Don't show any scheduled entries in the global todo list. The idea behind this is that by scheduling it, you have already "taken care" of this item. t Same as all', for backward compatibility. This variable can also have an integer as a value. See org-agenda-todo-ignore-timestamp' for more details. See also org-agenda-todo-ignore-with-date'. See also the variable org-agenda-tags-todo-honor-ignore-options' if you want to make his option also apply to the tags-todo list. ## org-log-into-drawer (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-log-into-drawer :END: Non-nil means insert state change notes and time stamps into a drawer. When nil, state changes notes will be inserted after the headline and any scheduling and clock lines, but not inside a drawer. The value of this variable should be the name of the drawer to use. LOGBOOK is proposed as the default drawer for this purpose, you can also set this to a string to define the drawer of your choice. A value of t is also allowed, representing "LOGBOOK". A value of t or nil can also be set with on a per-file-basis with #+STARTUP: logdrawer #+STARTUP: nologdrawer If this variable is set, org-log-state-notes-insert-after-drawers' will be ignored. You can set the property LOG_INTO_DRAWER to overrule this setting for a subtree. Do not check directly this variable in a Lisp program. Call function org-log-into-drawer' instead. ## org-icalendar-combined-description (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-icalendar-combined-description :END: Calendar description for the combined iCalendar (all agenda files). ## org-table-formula-field-format (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-formula-field-format :END: Format for fields which contain the result of a formula. For example, using "~%s~" will display the result within tilde characters. Beware that modifying the display can prevent the field from being used in another formula. ## org-agenda-start-on-weekday 1 :PROPERTIES: :CUSTOM_ID: org-agenda-start-on-weekday :END: Non-nil means start the overview always on the specified weekday. 0 denotes Sunday, 1 denotes Monday, etc. When nil, always start on the current day. Custom commands can set this variable in the options section. ## org-agenda-search-headline-for-time t :PROPERTIES: :CUSTOM_ID: org-agenda-search-headline-for-time :END: Non-nil means search headline for a time-of-day. If the headline contains a time-of-day in one format or another, it will be used to sort the entry into the time sequence of items for a day. Some people have time stamps in the headline that refer to the creation time or so, and then this produces an unwanted side effect. If this is the case for your, use this variable to turn off searching the headline for a time. ## org-learn-always-reschedule nil :PROPERTIES: :CUSTOM_ID: org-learn-always-reschedule :END: If non-nil, always reschedule items, even if retention was "perfect". ## org-attach-git-annex-cutoff (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-attach-git-annex-cutoff :END: If non-nil, files larger than this will be annexed instead of stored. ## org-table-automatic-realign (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-automatic-realign :END: Non-nil means automatically re-align table when pressing TAB or RETURN. When nil, aligning is only done with \[org-table-align]', or after column removal/insertion. ## org-footnote-auto-label (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-footnote-auto-label :END: Non-nil means define automatically new labels for footnotes. Possible values are: nil Prompt the user for each label. t Create unique labels of the form [fn:1], [fn:2], etc. confirm Like t, but let the user edit the created value. The label can be removed from the minibuffer to create an anonymous footnote. random Automatically generate a unique, random label. ## org-table-export-default-format (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-export-default-format :END: Default export parameters for org-table-export'. These can be overridden for a specific table by setting the TABLE_EXPORT_FORMAT property. See the manual section on orgtbl radio tables for the different export transformations and available parameters. ## org-agenda-skip-archived-trees (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-agenda-skip-archived-trees :END: Non-nil means the agenda will skip any items located in archived trees. An archived tree is a tree marked with the tag ARCHIVE. The use of this variable is no longer recommended, you should leave it at the value t. Instead, use the key v' to cycle the archives-mode in the agenda. ## org-footnote-auto-adjust (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-footnote-auto-adjust :END: Non-nil means automatically adjust footnotes after insert/delete. When this is t, after each insertion or deletion of a footnote, simple fn:N footnotes will be renumbered, and all footnotes will be sorted. If you want to have just sorting or just renumbering, set this variable to sort' or renumber'. The main values of this variable can be set with in-buffer options: #+STARTUP: fnadjust #+STARTUP: nofnadjust ## org-babel-tangle-lang-exts (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-tangle-lang-exts :END: Alist mapping languages to their file extensions. The key is the language name, the value is the string that should be inserted as the extension commonly used to identify files written in this language. If no entry is found in this list, then the name of the language is used. ## org-hidden-keywords (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-hidden-keywords :END: List of symbols corresponding to keywords to be hidden the org buffer. For example, a value \='(title) for this list will make the document's title appear in the buffer without the initial #+TITLE: keyword. ## org-preview-latex-default-process (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-preview-latex-default-process :END: The default process to convert LaTeX fragments to image files. All available processes and theirs documents can be found in org-preview-latex-process-alist', which see. ## org-publish-use-timestamps-flag (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-publish-use-timestamps-flag :END: Non-nil means use timestamp checking to publish only changed files. When nil, do no timestamp checking and always publish all files. ## org-man-logfiles-extensions (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-man-logfiles-extensions :END: The list of file extensions to consider as Man logfiles. ## org-bibtex-treat-headline-as-title (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-bibtex-treat-headline-as-title :END: Treat headline text as title if title property is absent. If an entry is missing a title property, use the headline text as the property. If this value is t, org-bibtex-check' will ignore a missing title field. ## org-blank-before-new-entry (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-blank-before-new-entry :END: Should org-insert-heading' leave a blank line before new heading/item? The value is an alist, with heading' and plain-list-item' as CAR, and a boolean flag as CDR. The cdr may also be the symbol auto', in which case Org will look at the surrounding headings/items and try to make an intelligent decision whether to insert a blank line or not. ## org-feed-default-template (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-feed-default-template :END: Template for the Org node created from RSS feed items. This is just the default, each feed can specify its own. Any fields from the feed item can be interpolated into the template with %name, for example %title, %description, %pubDate etc. In addition, the following special escapes are valid as well: %h The title, or the first line of the description %t The date as a stamp, either from (if present), or the current date %T Date and time %u,%U Like %t,%T, but inactive time stamps %a A link, from if that is a permalink, else from %(sexp) Evaluate elisp (sexp)' and replace with the result, the simple %-escapes above can be used as arguments, e.g. %(capitalize \"%h\") ## org-time-stamp-custom-formats (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-time-stamp-custom-formats :END: Custom formats for time stamps. See format-time-string' for the syntax. These are overlaid over the default ISO format if the variable org-display-custom-times' is set. Time like %H:%M should be at the end of the second format. The custom formats are also honored by export commands, if custom time display is turned on at the time of export. ## org-man-table-scientific-notation (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-man-table-scientific-notation :END: Format string to display numbers in scientific notation. The format should have "%s" twice, for mantissa and exponent (i.e. "%s\\times10^{%s}"). When nil, no transformation is made. ## org-babel-ruby-nil-to (funcall (function (closure (i... :PROPERTIES: :CUSTOM_ID: org-babel-ruby-nil-to :END: Replace nil in ruby tables with this before returning. ## org-babel-J-command (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-J-command :END: Command to call J. ## org-babel-R-command (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-R-command :END: Name of command to use for executing R code. ## org-clock-x11idle-program-name (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-x11idle-program-name :END: Name of the program which prints X11 idle time in milliseconds. You can find x11idle.c in the contrib/scripts directory of the Org git distribution. Or, you can do: sudo apt-get install xprintidle if you are using Debian. ## org-icalendar-with-timestamps (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-icalendar-with-timestamps :END: Non-nil means make an event from plain time stamps. It can be set to active', inactive', t or nil, in order to make an event from, respectively, only active timestamps, only inactive ones, all of them or none. This variable has precedence over org-export-with-timestamps'. It can also be set with the #+OPTIONS line, e.g. "<:t". ## org-mobile-encryption-password (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-mobile-encryption-password :END: Password for encrypting files uploaded to the server. This is a single password which is used for AES-256 encryption. The same password must also be set in the MobileOrg application. All Org files, including mobileorg.org will be encrypted using this password. SECURITY CONSIDERATIONS: Note that, when Org runs the encryption commands, the password could be visible briefly on your system with the ps' command. So this method is only intended to keep the files secure on the server, not on your own machine. Also, if you set this variable in an init file (.emacs or .emacs.d/init.el or custom.el...) and if that file is stored in a way so that other can read it, this also limits the security of this approach. You can also leave this variable empty - Org will then ask for the password once per Emacs session. ## org-agenda-format-date (quote org-agenda-format-date-... :PROPERTIES: :CUSTOM_ID: org-agenda-format-date :END: Format string for displaying dates in the agenda. Used by the daily/weekly agenda and by the timeline. This should be a format string understood by format-time-string', or a function returning the formatted date as a string. The function must take a single argument, a calendar-style date list like (month day year). ## org-babel-remote-temporary-directory (funcall (function (closure (*... :PROPERTIES: :CUSTOM_ID: org-babel-remote-temporary-directory :END: Directory to hold temporary files on remote hosts. ## org-export-with-section-numbers (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-section-numbers :END: Non-nil means add section numbers to headlines when exporting. When set to an integer n, numbering will only happen for headlines whose relative level is higher or equal to n. This option can also be set with the OPTIONS keyword, e.g. "num:t". ## org-export-with-latex (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-latex :END: Non-nil means process LaTeX environments and fragments. This option can also be set with the OPTIONS line, e.g. "tex:verbatim". Allowed values are: nil Ignore math snippets. verbatim' Keep everything in verbatim. t Allow export of math snippets. ## org-export-exclude-tags (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-exclude-tags :END: Tags that exclude a tree from export. All trees carrying any of these tags will be excluded from export. This is without condition, so even subtrees inside that carry one of the org-export-select-tags' will be removed. This option can also be set with the EXCLUDE_TAGS keyword. ## org-html-head-include-default-style (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-head-include-default-style :END: Non-nil means include the default style in exported HTML files. The actual style is defined in org-html-style-default' and should not be modified. Use org-html-head' to use your own style information. ## org-habit-completed-glyph (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-habit-completed-glyph :END: Glyph character used to show completed days on which a task was done. ## org-mhe-search-all-folders (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-mhe-search-all-folders :END: Non-nil means the search for the mh-message may extend to all folders. When non-nil, the search for a message will extend to all other folders if it cannot be found in the folder given in the link. Searching all folders may be slow with the default pick based search but is very efficient with one of the other search engines supported by MH-E. ## org-babel-lua-hline-to (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-babel-lua-hline-to :END: Replace hlines in incoming tables with this when translating to lua. ## org-agenda-max-todos nil :PROPERTIES: :CUSTOM_ID: org-agenda-max-todos :END: Maximum number of TODOs to display in an agenda. This can be nil (no limit) or an integer or an alist of agenda types with an associated number of entries to display in this type. ## org-agenda-skip-scheduled-delay-if-deadline nil :PROPERTIES: :CUSTOM_ID: org-agenda-skip-scheduled-delay-if-deadline :END: Non-nil means skip scheduled delay when entry also has a deadline. This variable may be set to nil, t, the symbol post-deadline', or a number which will then give the number of days after the actual scheduled date when the delay should expire. The symbol post-deadline' eliminates the schedule delay when the date is posterior to the deadline. ## org-html-keep-old-src (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-keep-old-src :END: When non-nil, use instead of . ## org-table-fix-formulas-confirm (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-fix-formulas-confirm :END: Whether the user should confirm when Org fixes formulas. ## org-clock-into-drawer (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-into-drawer :END: Non-nil when clocking info should be wrapped into a drawer. When non-nil, clocking info will be inserted into the same drawer as log notes (see variable org-log-into-drawer'), if it exists, or "LOGBOOK" otherwise. If necessary, the drawer will be created. When an integer, the drawer is created only when the number of clocking entries in an item reaches or exceeds this value. When a string, it becomes the name of the drawer, ignoring the log notes drawer altogether. Do not check directly this variable in a Lisp program. Call function org-clock-into-drawer' instead. ## org-src-tab-acts-natively (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-src-tab-acts-natively :END: If non-nil, the effect of TAB in a code block is as if it were issued in the language major mode buffer. ## org-log-done-with-time (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-log-done-with-time :END: Non-nil means the CLOSED time stamp will contain date and time. When nil, only the date will be recorded. ## org-html-table-data-tags (funcall (function (closure (h... :PROPERTIES: :CUSTOM_ID: org-html-table-data-tags :END: The opening and ending tags for table data fields. This is customizable so that alignment options can be specified. The first %s will be filled with the scope of the field, either row or col. The second %s will be replaced by a style entry to align the field. See also the variable org-html-table-align-individual-fields'. ## org-agenda-use-time-grid t :PROPERTIES: :CUSTOM_ID: org-agenda-use-time-grid :END: Non-nil means show a time grid in the agenda schedule. A time grid is a set of lines for specific times (like every two hours between 8:00 and 20:00). The items scheduled for a day at specific times are sorted in between these lines. For details about when the grid will be shown, and what it will look like, see the variable org-agenda-time-grid'. ## org-columns-modify-value-for-display-function (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-columns-modify-value-for-display-function :END: Function that modifies values for display in column view. For example, it can be used to cut out a certain part from a time stamp. The function must take 2 arguments: column-title The title of the column (*not* the property name) value The value that should be modified. The function should return the value that should be displayed, or nil if the normal value should be used. ## org-edit-src-content-indentation (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-edit-src-content-indentation :END: Indentation for the content of a source code block. This should be the number of spaces added to the indentation of the #+begin line in order to compute the indentation of the block content after editing it with \[org-edit-src-code]'. It has no effect if org-src-preserve-indentation' is non-nil. ## org-indent-mode-turns-off-org-adapt-indentation (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-indent-mode-turns-off-org-adapt-indentation :END: Non-nil means setting the variable org-indent-mode' will turn off indentation adaptation. For details see the variable org-adapt-indentation'. ## org-table-relative-ref-may-cross-hline (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-relative-ref-may-cross-hline :END: Non-nil means relative formula references may cross hlines. Here are the allowed values: nil Relative references may not cross hlines. They will reference the field next to the hline instead. Coming from below, the reference will be to the field below the hline. Coming from above, it will be to the field above. t Relative references may cross hlines. error An attempt to cross a hline will throw an error. It is probably good to never set this variable to nil, for the sake of portability of tables. ## org-ascii-paragraph-spacing (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-ascii-paragraph-spacing :END: Number of white lines between paragraphs. If the value is an integer, add this number of blank lines between contiguous paragraphs. If is it the symbol auto', keep the same number of blank lines as in the original document. ## org-export-headline-levels (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-headline-levels :END: The last level which is still exported as a headline. Inferior levels will usually produce itemize or enumerate lists when exported, but back-end behavior may differ. This option can also be set with the OPTIONS keyword, e.g. "H:2". ## org-export-with-statistics-cookies (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-export-with-statistics-cookies :END: Non-nil means include statistics cookies in export. This option can also be set with the OPTIONS keyword, e.g. "stat:nil" ## org-agenda-entry-text-maxlines 5 :PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-maxlines :END: Number of text lines to be added when E' is pressed in the agenda. Note that this variable only used during agenda display. To add entry text when exporting the agenda, configure the variable org-agenda-add-entry-text-maxlines'. :PROPERTIES: :CUSTOM_ID: org-babel-tangle-use-relative-file-links :END: Use relative path names in links from tangled source back the Org file. ## org-agenda-entry-text-leaders " > " :PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-leaders :END: Text prepended to the entry text in agenda buffers. ## org-ctrl-k-protect-subtree (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-ctrl-k-protect-subtree :END: Non-nil means, do not delete a hidden subtree with C-k. When set to the symbol error', simply throw an error when C-k is used to kill (part-of) a headline that has hidden text behind it. Any other non-nil value will result in a query to the user, if it is OK to kill that hidden subtree. When nil, kill without remorse. ## org-directory (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-directory :END: Directory with Org files. This is just a default location to look for Org files. There is no need at all to put your files into this directory. It is used in the following situations: 1. When a capture template specifies a target file that is not an absolute path. The path will then be interpreted relative to org-directory' 2. When the value of variable org-agenda-files' is a single file, any relative paths in this file will be taken as relative to org-directory'. ## org-latex-footnote-separator (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-latex-footnote-separator :END: Text used to separate footnotes. ## org-clock-auto-clock-resolution (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-auto-clock-resolution :END: When to automatically resolve open clocks found in Org buffers. ## org-log-state-notes-insert-after-drawers (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-log-state-notes-insert-after-drawers :END: Non-nil means insert state change notes after any drawers in entry. Only the drawers that *immediately* follow the headline and the deadline/scheduled line are skipped. When nil, insert notes right after the heading and perhaps the line with deadline/scheduling if present. This variable will have no effect if org-log-into-drawer' is set. ## org-plain-list-ordered-item-terminator (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-plain-list-ordered-item-terminator :END: The character that makes a line with leading number an ordered list item. Valid values are ?. and ?). To get both terminators, use t. This variable needs to be set before org.el is loaded. If you need to make a change while Emacs is running, use the customize interface or run the following code after updating it: \[org-element-update-syntax]' ## org-ascii-indented-line-width (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-ascii-indented-line-width :END: Additional indentation width for the first line in a paragraph. If the value is an integer, indent the first line of each paragraph by this width, unless it is located at the beginning of a section, in which case indentation is removed from that line. If it is the symbol auto' preserve indentation from original document. ## org-attach-expert (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-attach-expert :END: Non-nil means do not show the splash buffer with the attach dispatcher. :PROPERTIES: :CUSTOM_ID: org-highlight-links :END: Types of links that should be highlighted in Org files. This is a list of symbols, each one of them leading to the highlighting of a certain link type. You can still open links that are not highlighted. In principle, it does not hurt to turn on highlighting for all link types. There may be a small gain when turning off unused link types. The types are: bracket The recommended [[link][description]] or [[link]] links with hiding. angle Links in angular brackets that may contain whitespace like . plain Plain links in normal text, no whitespace, like http://google.com. radio Text that is matched by a radio target, see manual for details. tag Tag settings in a headline (link to tag search). date Time stamps (link to calendar). footnote Footnote labels. If you set this variable during an Emacs session, use org-mode-restart' in the Org buffer so that the change takes effect. ## org-src-preserve-indentation (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-src-preserve-indentation :END: If non-nil preserve leading whitespace characters on export. \ If non-nil leading whitespace characters in source code blocks are preserved on export, and when switching between the org buffer and the language mode edit buffer. When this variable is nil, after editing with \[org-edit-src-code]', the minimum (across-lines) number of leading whitespace characters are removed from all lines, and the code block is uniformly indented according to the value of org-edit-src-content-indentation'. ## org-custom-properties (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-custom-properties :END: List of properties (as strings) with a special meaning. The default use of these custom properties is to let the user hide them with org-toggle-custom-properties-visibility'. ## org-clock-heading-function (funcall (function (closure (t... :PROPERTIES: :CUSTOM_ID: org-clock-heading-function :END: When non-nil, should be a function to create org-clock-heading'. This is the string shown in the mode line when a clock is running. The function is called with point at the beginning of the headline. :PROPERTIES: :CUSTOM_ID: org-link-frame-setup :END: Setup the frame configuration for following links. When following a link with Emacs, it may often be useful to display this link in another window or frame. This variable can be used to set this up for the different types of links. For VM, use any of vm-visit-folder' vm-visit-folder-other-window' vm-visit-folder-other-frame' For Gnus, use any of gnus' gnus-other-frame' org-gnus-no-new-news' For FILE, use any of find-file' find-file-other-window' find-file-other-frame' For Wanderlust use any of wl' wl-other-frame' For the calendar, use the variable calendar-setup'. For BBDB, it is currently only possible to display the matches in another window. ## org-agenda-remove-times-when-in-prefix t :PROPERTIES: :CUSTOM_ID: org-agenda-remove-times-when-in-prefix :END: Non-nil means remove duplicate time specifications in agenda items. When the format org-agenda-prefix-format' contains a %t' specifier, a time-of-day specification in a headline or diary entry is extracted and placed into the prefix. If this option is non-nil, the original specification (a timestamp or -range, or just a plain time(range) specification like 11:30-4pm) will be removed for agenda display. This makes the agenda less cluttered. The option can be t or nil. It may also be the symbol beg', indicating that the time should only be removed when it is located at the beginning of the headline/diary entry. ## org-pretty-entities-include-sub-superscripts (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-pretty-entities-include-sub-superscripts :END: Non-nil means, pretty entity display includes formatting sub/superscripts. ## org-todo-interpretation (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-todo-interpretation :END: Controls how TODO keywords are interpreted. This variable is in principle obsolete and is only used for backward compatibility, if the interpretation of todo keywords is not given already in org-todo-keywords'. See that variable for more information. ## org-yank-folded-subtrees (funcall (function (closure (f... :PROPERTIES: :CUSTOM_ID: org-yank-folded-subtrees :END: Non-nil means when yanking subtrees, fold them. If the kill is a single subtree, or a sequence of subtrees, i.e. if it starts with a heading and all other headings in it are either children or siblings, then fold all the subtrees. However, do this only if no text after the yank would be swallowed into a folded tree by this action. ## org-table-formula-use-constants (funcall (function (closure (o... :PROPERTIES: :CUSTOM_ID: org-table-formula-use-constants :END: Non-nil means interpret constants in formulas in tables. A constant looks like c' or \$Grav' and will be replaced before evaluation
by the value given in org-table-formula-constants', or by a value obtained
from the constants.el' package.

Non-nil means use indirect buffer to display infile links.
Activating internal links (from one location in a file to another location
in the same file) normally just jumps to the location.  When the link is
activated with a \[universal-argument]' prefix (or with mouse-3), the link is displayed in
another window.  When this option is set, the other window actually displays
an indirect buffer clone of the current buffer, to avoid any visibility
changes to the current buffer.

## org-clock-sound (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-clock-sound :END:

Possible values are:

nil        No sound played
t          Standard Emacs beep
file name  Play this sound file, fall back to beep

## org-property-format (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-property-format :END:

How property key/value pairs should be formatted by indent-line'.
When indent-line' hits a property definition, it will format the line
according to this format, mainly to make sure that the values are
lined-up with respect to each other.

## org-log-refile (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-log-refile :END:

Information to record when a task is refiled.

Possible values are:

This option can also be set with on a per-file-basis with

#+STARTUP: nologrefile
#+STARTUP: logrefile
#+STARTUP: lognoterefile

You can have local logging settings for a subtree by setting the LOGGING
property to one or more of these keywords.

When bulk-refiling from the agenda, the value note' is forbidden and
will temporarily be changed to time'.

## org-mobile-allpriorities (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-mobile-allpriorities :END:

Default set of priority cookies for the index file.

## org-bibtex-autogen-keys (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-bibtex-autogen-keys :END:

Set to a truth value to use bibtex-generate-autokey' to generate keys.

## org-export-with-todo-keywords (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-export-with-todo-keywords :END:

Non-nil means include TODO keywords in export.
When nil, remove all these keywords from the export.  This option
can also be set with the OPTIONS keyword, e.g.  "todo:nil".

## org-export-with-tags (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-export-with-tags :END:

If nil, do not export tags, just remove them from headlines.

If this is the symbol not-in-toc', tags will be removed from
the document.

This option can also be set with the OPTIONS keyword,
e.g. "tags:nil".

## org-latex-toc-command (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-latex-toc-command :END:

the toc:nil option, not to those generated with #+TOC keyword.

## org-cycle-separator-lines (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-cycle-separator-lines :END:

Number of empty lines needed to keep an empty line between collapsed trees.
If you leave an empty line between the end of a subtree and the following
headline, this empty line is hidden when the subtree is folded.
Org mode will leave (exactly) one empty line visible if the number of
empty lines is equal or larger to the number given in this variable.
So the default 2 means at least 2 empty lines after the end of a subtree
are needed to produce free space between a collapsed subtree and the

If the number is negative, and the number of empty lines is at least -N,
all empty lines are shown.

Special case: when 0, never leave empty lines in collapsed view.

## org-disputed-keys (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-disputed-keys :END:

Keys for which Org mode and other modes compete.
This is an alist, cars are the default keys, second element specifies
the alternative to use when org-replace-disputed-keys' is t.

Keys can be specified in any syntax supported by define-key'.
The value of this option takes effect only at Org mode startup,
therefore you'll have to restart Emacs to apply it after changing.

## org-cycle-skip-children-state-if-no-children (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-cycle-skip-children-state-if-no-children :END:

Non-nil means skip CHILDREN state in entries that don't have any.

## org-hide-emphasis-markers (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-hide-emphasis-markers :END:

Non-nil mean font-lock should hide the emphasis marker characters.

## org-clock-persist-query-save (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-clock-persist-query-save :END:

When non-nil, ask before saving the current clock on exit.

## org-odt-format-headline-function (funcall (function (closure (h...

This function will be called with 5 arguments:
TODO      the todo keyword (string or nil).
TODO-TYPE the type of todo (symbol: todo', done', nil)
PRIORITY  the priority of the headline (integer or nil)
TEXT      the main headline text (string).
TAGS      the tags string, separated with colons (string or nil).

The function result will be used as headline text.

## org-refile-target-verify-function (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-refile-target-verify-function :END:

Function to verify if the headline at point should be a refile target.
The function will be called without arguments, with point at the
beginning of the headline.  It should return t and leave point
where it is if the headline is a valid target for refiling.

If the target should not be selected, the function must return nil.
In addition to this, it may move point to a place from where the search
should be continued.  For example, the function may decide that the entire
subtree of the current entry should be excluded and move point to the end
of the subtree.

## org-clock-out-when-done (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-clock-out-when-done :END:

When non-nil, clock will be stopped when the clocked entry is marked DONE.
\DONE here means any DONE-like state.
A nil value means clock will keep running until stopped explicitly with
\[org-clock-out]', or until the clock is started in a different item.
Instead of t, this can also be a list of TODO states that should trigger
clocking out.

## org-attach-allow-inheritance (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-attach-allow-inheritance :END:

Non-nil means allow attachment directories be inherited.

## org-export-copy-to-kill-ring (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-export-copy-to-kill-ring :END:

Non-nil means pushing export output to the kill ring.
This variable is ignored during asynchronous export.

## org-inlinetask-min-level (funcall (function (closure (t...

Minimum level a headline must have before it is treated as an inline task.
Don't set it to something higher than 29' or clocking will break since this
is the hardcoded maximum number of stars org-clock-sum' will work with.

It is strongly recommended that you set org-cycle-max-level' not at all,
or to a number smaller than this one.  In fact, when org-cycle-max-level' is
not set, it will be assumed to be one less than the value of smaller than
the value of this variable.

## org-archive-mark-done (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-archive-mark-done :END:

Non-nil means mark entries as DONE when they are moved to the archive file.
This can be a string to set the keyword to use.  When non-nil, Org will
use the first keyword in its list that means done.

## org-icalendar-combined-agenda-file (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-icalendar-combined-agenda-file :END:

The file name for the iCalendar file covering all agenda files.
This file is created with the command \[org-icalendar-combine-agenda-files]'.
The file name should be absolute.  It will be overwritten without warning.

A regexp to skip confirmation for Elisp links.

## org-babel-C-compiler (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-babel-C-compiler :END:

Command used to compile a C source code file into an executable.
May be either a command in the path, like gcc
or an absolute path name, like /usr/local/bin/gcc
parameter may be used, like gcc -v

## org-babel-D-compiler (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-babel-D-compiler :END:

Command used to compile and execute a D source code file.
May be either a command in the path, like rdmd
or an absolute path name, like /usr/local/bin/rdmd
parameter may be used, like rdmd --chatty

## org-clock-string-limit (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-clock-string-limit :END:

Maximum length of clock strings in the mode line.  0 means no limit.

## org-agenda-move-date-from-past-immediately-to-today t

:PROPERTIES: :CUSTOM_ID: org-agenda-move-date-from-past-immediately-to-today :END:

Non-nil means jump to today when moving a past date forward in time.
When using S-right in the agenda to move a a date forward, and the date
stamp currently points to the past, the first key press will move it
to today.  WHen nil, just move one day forward even if the date stays
in the past.

## org-bookmark-names-plist (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-bookmark-names-plist :END:

Names for bookmarks automatically set by some Org commands.
This can provide strings as names for a number of bookmarks Org sets
automatically.  The following keys are currently implemented:
:last-capture
:last-capture-marker
:last-refile
When a key does not show up in the property list, the corresponding bookmark
is not set.

## org-babel-clojure-backend (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-babel-clojure-backend :END:

Backend used to evaluate Clojure code blocks.

## org-export-show-temporary-export-buffer (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-export-show-temporary-export-buffer :END:

Non-nil means show buffer after exporting to temp buffer.
When Org exports to a file, the buffer visiting that file is never
shown, but remains buried.  However, when exporting to
a temporary buffer, that buffer is popped up in a second window.
When this variable is nil, the buffer remains buried also in
these cases.

## org-export-in-background (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-export-in-background :END:

Non-nil means export and publishing commands will run in background.
Results from an asynchronous export are never displayed
automatically.  But you can retrieve them with \[org-export-stack]'.

## org-agenda-show-inherited-tags t

:PROPERTIES: :CUSTOM_ID: org-agenda-show-inherited-tags :END:

Non-nil means show inherited tags in each agenda line.

When this option is set to always', it takes precedence over
org-agenda-use-tag-inheritance' and inherited tags are shown
in every agenda.

When this option is set to t (the default), inherited tags are
shown when they are available, i.e. when the value of
org-agenda-use-tag-inheritance' enables tag inheritance for the
given agenda type.

This can be set to a list of agenda types in which the agenda
must display the inherited tags.  Available types are todo',
agenda', search' and timeline'.

When set to nil, never show inherited tags in agenda lines.

## org-babel-no-eval-on-ctrl-c-ctrl-c (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-babel-no-eval-on-ctrl-c-ctrl-c :END:

\Remove code block evaluation from the \[org-ctrl-c-ctrl-c]' key binding.

## org-odd-levels-only (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-odd-levels-only :END:

Non-nil means skip even levels and only use odd levels for the outline.
This has the effect that two stars are being added/taken away in
promotion/demotion commands.  It also influences how levels are
handled by the exporters.
Changing it requires restart of font-lock-mode' to become effective
for fontification also in regions already fontified.
You may also set this on a per-file basis by adding one of the following
lines to the buffer:

#+STARTUP: odd
#+STARTUP: oddeven

## org-ascii-headline-spacing (funcall (function (closure (t...

Number of blank lines inserted around headlines.

This variable can be set to a cons cell.  In that case, its car
represents the number of blank lines present before headline
contents whereas its cdr reflects the number of blank lines after
contents.

A nil value replicates the number of blank lines found in the
original Org buffer at the same place.

## org-html-htmlize-output-type (funcall (function (closure (h...

:PROPERTIES: :CUSTOM_ID: org-html-htmlize-output-type :END:

Output type to be used by htmlize when formatting code snippets.
Choices are css' to export the CSS selectors only,inline-css'
to export the CSS attribute values inline in the HTML or nil' to
export plain text.  We use as default inline-css', in order to
make the resulting HTML self-containing.

However, this will fail when using Emacs in batch mode for export, because
then no rich font definitions are in place.  It will also not be good if
people with different Emacs setup contribute HTML files to a website,
because the fonts will represent the individual setups.  In these cases,
it is much better to let Org/Htmlize assign classes only, and to use
a style file to define the look of these classes.
To get a start for your css file, start Emacs session and make sure that
all the faces you are interested in are defined, for example by loading files
in all modes you want.  Then, use the command
\[org-html-htmlize-generate-css]' to extract class definitions.

## org-read-date-display-live (funcall (function (closure (f...

Non-nil means display current interpretation of date prompt live.
This display will be in an overlay, in the minibuffer.

## org-clock-history-length (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-clock-history-length :END:

Number of clock tasks to remember in history.

## org-imenu-depth (funcall (function (closure (f...

This also applied for speedbar access.

## org-icalendar-use-scheduled (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-icalendar-use-scheduled :END:

Contexts where iCalendar export should use a scheduling time stamp.

This is a list with possibly several symbols in it.  Valid symbols are:

event-if-todo'       Scheduling time stamps in TODO entries become an event.
event-if-not-todo'   Scheduling time stamps in non-TODO entries become an event.
todo-start'          Scheduling time stamps in TODO entries become start date.
Some calendar applications show TODO entries only after
that date.

## org-latex-format-headline-function (funcall (function (closure (t...

Function for formatting the headline's text.

This function will be called with six arguments:
TODO      the todo keyword (string or nil)
TODO-TYPE the type of todo (symbol: todo', done', nil)
PRIORITY  the priority of the headline (integer or nil)
TEXT      the main headline text (string)
TAGS      the tags (list of strings or nil)
INFO      the export options (plist)

The function result will be used in the section format string.

## org-koma-letter-default-class "default-koma-letter"

:PROPERTIES: :CUSTOM_ID: org-koma-letter-default-class :END:

Default class for org-koma-letter'.
The value must be a member of org-latex-classes'.

## org-cycle-max-level (funcall (function (closure (f...

:PROPERTIES: :CUSTOM_ID: org-cycle-max-level :END:

Maximum level which should still be subject to visibility cycling.
Levels higher than this will, for cycling, be treated as text, not a headline.
When org-odd-levels-only' is set, a value of N in this variable actually
means 2N-1 stars as the limiting headline.
When nil, cycle all levels.
Note that the limiting level of cycling is also influenced by
org-inlinetask-min-level'.  When org-cycle-max-level' is not set but
org-inlinetask-min-level' is, cycling will be limited to levels one less
than its value.

## org-md-footnote-format (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-md-footnote-format :END:

Format string for the footnote reference.
The %s will be replaced by the footnote reference itself.

## org-bbdb-extract-date-fun (funcall (function (closure (d...

:PROPERTIES: :CUSTOM_ID: org-bbdb-extract-date-fun :END:

How to retrieve month date year' from the anniversary field.

different from YYYY-MM-DD.  The function must return a list (month
date year).

How the path name in file links should be stored.
Valid values are:

relative  Relative to the current directory, i.e. the directory of the file
into which the link is being inserted.
absolute  Absolute path, if possible with ~ for home directory.
noabbrev  Absolute path, no abbreviation of home directory.
adaptive  Use relative path for files in the current directory and sub-
directories of it.  For other files, use an absolute path.

This option can also be set with one or more FROM_ADDRESS
keywords.

## org-export-with-emphasize (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-export-with-emphasize :END:

Non-nil means interpret *word*, /word/, _word_ and +word+.

If the export target supports emphasizing text, the word will be
typeset in bold, italic, with an underline or strike-through,
respectively.

This option can also be set with the OPTIONS keyword,
e.g. "*:nil".

## org-odt-schema-dir (funcall (function (closure (h...

:PROPERTIES: :CUSTOM_ID: org-odt-schema-dir :END:

Directory that contains OpenDocument schema files.

This directory contains:
1. rnc files for OpenDocument schema
2. a "schemas.xml" file that specifies locating rules needed
for auto validation of OpenDocument XML files.

Use the customize interface to set this variable.  This ensures
that rng-schema-locating-files' is updated and auto-validation
of OpenDocument XML takes place based on the value
rng-nxml-auto-validate-flag'.

The default value of this variable varies depending on the
version of org in use and is initialized from
org-odt-schema-dir-list'.  The OASIS schema files are available
only in the org's private git repository.  It is *not* bundled
with GNU ELPA tar or standard Emacs distribution.

## org-inlinetask-default-state (funcall (function (closure (t...

Non-nil means make inline tasks have a TODO keyword initially.
This should be the state org-inlinetask-insert-task' should use by
default, or nil of no state should be assigned.

## org-mobile-inbox-for-pull (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-mobile-inbox-for-pull :END:

The file where captured notes and flags will be appended to.
During the execution of org-mobile-pull', the file
org-mobile-capture-file' will be emptied it's contents have
been appended to the file given here.  This file should be in
org-directory', and not in the staging area or on the web server.

## org-babel-exp-call-line-template (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-babel-exp-call-line-template :END:

Template used to export call lines.
This template may be customized to include the call line name
with any export markup.  The template is filled out using
org-fill-template', and the following %keys may be used.

line --- call line

An example value would be "\n: call: %line" to export the call line
wrapped in a verbatim environment.

Note: the results are inserted separately after the contents of
this template.

## org-agenda-skip-timestamp-if-done nil

:PROPERTIES: :CUSTOM_ID: org-agenda-skip-timestamp-if-done :END:

Non-nil means don't select item by timestamp or -range if it is DONE.

## org-html-toplevel-hlevel (funcall (function (closure (h...

:PROPERTIES: :CUSTOM_ID: org-html-toplevel-hlevel :END:

The  level for level 1 headings in HTML export.
This is also important for the classes that will be wrapped around headlines
and outline structure.  If this variable is 1, the top-level headlines will
be

# for formatting the document title.

## org-latex-minted-langs (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-latex-minted-langs :END:

Alist mapping languages to their minted language counterpart.
The key is a symbol, the major mode symbol without the "-mode".
The value is the string that should be inserted as the language
parameter for the minted package.  If the mode name and the
listings name are the same, the language does not need an entry
in this list - but it does not hurt if it is present.

Note that minted uses all lower case for language identifiers,
and that the full list of language identifiers can be obtained
with:

pygmentize -L lexers

## org-clock-clocktable-default-properties (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-clock-clocktable-default-properties :END:

Default properties for new clocktables.
These will be inserted into the BEGIN line, to make it easy for users to
play with them.

## org-html-table-use-header-tags-for-first-column (funcall (function (closure (h...

Non-nil means format column one in tables with header tags.
When nil, also column one will use data tags.

Function to translate links with different syntax to Org syntax.
This can be used to translate links created for example by the Planner
or emacs-wiki packages to Org syntax.
The function must accept two parameters, a TYPE containing the link
protocol name like "rmail" or "gnus" as a string, and the linked path,
which is everything after the link protocol.  It should return a cons
with possibly modified values of type and path.
Org contains a function for this, so if you set this variable to

## org-latex-remove-logfiles (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-latex-remove-logfiles :END:

Non-nil means remove the logfiles produced by PDF production.
By default, logfiles are files with these extensions: .aux, .idx,
.log, .out, .toc, .nav, .snm and .vrb.  To define the set of
logfiles to remove, set org-latex-logfiles-extensions'.

## org-koma-letter-location ""

:PROPERTIES: :CUSTOM_ID: org-koma-letter-location :END:

Sender's extension field, as a string.

This option can also be set with the LOCATION keyword.
Moreover, when:
or there is no LOCATION keyword or the LOCATION keyword is
empty;
(2) the letter contains a headline with the special
tag "location";
then the location will be set as the content of the location

The location field is typically printed right of the address
field (See Figure 4.9. in the English manual of 2015-10-03).

## org-latex-custom-lang-environments (funcall (function (closure (t...

:PROPERTIES: :CUSTOM_ID: org-latex-custom-lang-environments :END:

Alist mapping languages to language-specific LaTeX environments.

It is used during export of src blocks by the listings and minted
latex packages.  The environment may be a simple string, composed of
only letters and numbers.  In this case, the string is directly the
name of the latex environment to use.  The environment may also be
a format string.  In this case the format string will be directly
exported.  This format string may contain these elements:

%s for the formatted source
%c for the caption
%f for the float attribute
%l for an appropriate label
%o