#### org-faq.org150 KB History Raw

#+EMAIL: mdl AT imapmail DOT org #+AUTHOR: Worg people #+LANGUAGE: en #+TITLE: Org-mode Frequently Asked Questions #+OPTIONS: toc:t H:2 [[file:index.org][{Back to Worg's index}]] * Latest questions on StackOverflow #+index: StackOverflow #+begin_html #+end_html * What is org-mode? :PROPERTIES: :CUSTOM_ID: What-is-org-mode :END: ** Can Org-mode do "x"? Does org have "x" feature? :PROPERTIES: :CUSTOM_ID: can-org-do-x :END: In its default setup, Org-mode offers a simple outlining and task management environment. But it also has a huge number of features and settings "under the hood." Advanced users have configured Org-mode for almost every conceivable use scenario. Org-mode has a very active community and rich and extensive documentation. Before emailing the mailing list to ask whether Org-mode has a particular feature or setting, please consult the following: - Read/search the manual. - http://orgmode.org/manual/index.html - Make sure to check out the following indexes: - [[http://orgmode.org/manual/Main-Index.html#Main-Index][Main Index]] - [[http://orgmode.org/manual/Key-Index.html#Key-Index][Key Index]] - [[http://orgmode.org/manual/Variable-Index.html#Variable-Index][Variable Index]] - The manual is also easily available from within emacs. To read the manual within emacs, you can evaluate =(info "(org)")= within emacs---i.e., type =C-x C-e= after the closing paragraph of the info expression above. You can also type =M-x info= and navigate to "Org Mode". You can search the entire manual by typing ~C-s term~. Keep pressing ~C-s~ to cycle through the results - Search the [[http://dir.gmane.org/gmane.emacs.orgmode][mailing list archives]]. There is a good chance that the feature you are looking for has already been discussed (most likely several times). - Check for features from within emacs. - Emacs has a wonderful built-in help system. - You can browse (and change) most customization options by typing =M-x org-customize=. - You can check for a feature by typing =M-x apropos [RET] [word]= or =C-h a word=. This will search for all functions and variables matching the term (or regexp) you enter. - You can browse (and search for) org functions, variables, and faces by using =M-x describe-variable= (=C-h v=), =M-x describe-function= (=C-h f=), or =M-x describe-face=. After invoking one of these commands, simply type =org-[TAB]= to see a full list of relevant functions or variables or faces. You can then drill down further: e.g., =org-export-[TAB]= for export features. - Checkout the [[file:org-tutorials/index.org][tutorials on Worg]]. Several of these tutorials discuss advanced features (e.g., searching, custom agenda commands, tables, publishing) of Org-mode in depth. There are many other resources on Worg as well: - [[http://orgmode.org/worg/org-configs/index.html][Org Customization]] :: Includes a guide for beginners. - [[http://orgmode.org/worg/org-hacks.html][Org Hacks]] :: User-generated modifications and add-ons. - [[http://orgmode.org/worg/org-glossary.html][Org Glossary]] :: An explanation of basic Org-mode terms and concepts. ** Can I implement a GTD workflow with Org-mode? :PROPERTIES: :CUSTOM_ID: GTD-workflow-with-Org-mode :END: #+index: GTD!Workflow Yes, you can. Check for discussions and pointers [[http://orgmode.org/worg/org-gtd-etc.html][here]]. ** What is the difference between Org and TaskPaper? :PROPERTIES: :CUSTOM_ID: Org-and-TaskPaper :END: #+index: TaskPaper There is really no difference. Org is as /simple/ as [[http://hogbaysoftware.com/products/taskpaper][TaskPaper]]. It is just that, when using Org within Emacs, it lets you do many things that you wouldn't be able to do with TaskPaper. Yes, TaskPaper is fiddle-proof and people using Emacs tends to like fiddling (which is orthogonal to the idea of using todo-lists efficiently), but this is just a matter of discipline and common sense, not one of Org's design. Read [[http://article.gmane.org/gmane.emacs.orgmode/6224][Carsten's enlightening statement]] on this. ** What is the meaning of the Unicorn on Org's website? :PROPERTIES: :CUSTOM_ID: unicorn :END: #+index: Unicorn The Unicorn is the logo of Org-mode because: - Org-mode is the UNICs of ORgaNizers. - Org-mode is an Emacs mode, so it makes sense to use an animal similar or related to the gnu used for GNU Emacs. - Org-mode is meant to show you the way, and an animal with two horns can not do this very well, can it? - Unicorn tears are said to reverse petrification, and wasn't this how we all felt before getting to some degree of time and task management? - It will take forever to learn everything there is to know about a unicorn. - A unicorn is a fabulous creature. Org-mode wants to be a fabulous creation. Using a unicorn was originally /Bastien Guerry's/ idea. His friend, the french artist [[http://intemperies.over-blog.com/][Christophe Bataillon]], designed the logo for us, and /Greg Newman/ gave it a refresh some time later. Bastien writes why he chose a unicorn: #+BEGIN_QUOTE The first reason is not linked to the animal, but to the sounding of the word "Unicorn" - because Org gives you a /uni/que way of producing files in several format (HTML, LaTeX, etc.). The second reason is that a Unicorn doesn't really exist, it is just something you can dream about, and make others believe it does exist. Just like the perfect organizer. #+END_QUOTE There was a [[http://thread.gmane.org/gmane.emacs.orgmode/11641/focus%3D11641][thread about unicorns]] on the mailing list. [[http://thread.gmane.org/gmane.emacs.orgmode/11641/focus%3D11641][Christopher Suckling]] posted a link showing how to make a simple foldable unicorn (very appropriate for an outlining program!). [[http://article.gmane.org/gmane.emacs.orgmode/11735][Tim Burt]] made a very complicated one which is now a treasured possession of the Org-mode author. - Official logo: [[http://orgmode.org/img/org-mode-unicorn.png]] This logo is available in a number of different formats including Photoshop /.psd/ and scaleable vector graphics /.svg/ [[http://orgmode.org/img/][here]]. - An [[http://orgmode.org/img/nrocinu4.jpg][alternative version]] from Christophe Bataillon (c): - [[http://article.gmane.org/gmane.emacs.orgmode/14293][Chris Randle]] made a [[http://orgmode.org/img/nrocinu.txt][text version]] using the logo and [[http://glassgiant.com][glassgiant.com]]: - [[http://article.gmane.org/gmane.emacs.orgmode/14362][Stefan Vollmar]] made a [[http://orgmode.org/img/nrocinu.pdf][pdf version]] (here in [[http://orgmode.org/img/nrocinu_pdf.png][png]]) using "a simple threshold technique". - [[http://article.gmane.org/gmane.emacs.orgmode/11735/match%3D][Tim Burt]] made a folded Unicorn to match the spirit of Org - see the whole set of pictures [[http://www.flickr.com/photos/tcburt/sets/72157614543357071/][on his flickr page]]. - Are unicorns real? Answer [[http://article.gmane.org/gmane.emacs.orgmode/11687/match%3Drosslaird%2Bunicorn][here]] by Ross Laird. ** Is Org's documentation written in Org? No. Org's documentation is written in TeXinfo, which is the standard format for Emacs documentation. There is no export mechanism from Org to TeXinfo (yet). * Mailing list ** I think my Org-mode is broken! How do I report a bug? :PROPERTIES: :CUSTOM_ID: bug-reporting :END: #+index: Bug!Report 1. Make sure you are running [[#updating-org][the latest version of Org-mode]]. 2. Read [[http://orgmode.org/manual/Feedback.html][this section]] of the manual. 3. Provide a minimal example that duplicates the bug. - Create a minimal .emacs file and start emacs with that file as detailed in [[#minimal-emacs][these instructions]]. - Create a sample, minimal .org file that reliably reproduces the problem and post it to the mailing list. - Some users call this an "[[#ecm][ECM]]", a French acronym that means a "minimal complete example". ** What is an "ECM"? :PROPERTIES: :CUSTOM_ID: ecm :END: #+index: ECM This is a French acronym used by some mailing list members; it stands for "Exemple Complet Minimal", or "Complete Minimal Example". The term refers to test files that can reliably reproduce a bug with the minimal amount of code. When you report a bug to the mailing list, you should provide a minimal .org file (with no more text than necessary) that demonstrates the bug. See [[http://permalink.gmane.org/gmane.emacs.orgmode/41281][this post]] for more information. ** What should I do before contacting the mailing list? :PROPERTIES: :CUSTOM_ID: when-to-contact-mailing-list :END: The Org-mode mailing list is a high volume list, in which community members discuss use cases, configuration, bugs, and developments. If you are new to Org-mode, please read/search the excellent [[http://orgmode.org/manual/index.html][manual]] (and pay special attention to the indexes) before asking your question. You should also [[http://dir.gmane.org/gmane.emacs.orgmode][search the mailing list]] to see if your issue has already been discussed. See [[#can-org-do-x][this faq]] for more details. ** Why hasn't my email to the mailing list shown up yet? :PROPERTIES: :CUSTOM_ID: ml-post-delay :END: The org-mode mailing list is moderated. Thus, if you are not subscribed to the mailing list, your mail will only appear on the list after it has been approved by a moderator. To ensure that your mail appears quickly, please [[http://lists.gnu.org/mailman/listinfo/emacs-orgmode][subscribe to the list]]. ** I read the mailing list through gmane. Should I subscribe? :PROPERTIES: :CUSTOM_ID: ml-subscription-and-gmane :END: #+index: Gmane The org-mode mailing list is available via nntp at [[http://dir.gmane.org/gmane.emacs.orgmode][Gmane]]. Many participants in the list prefer read the list in a newsreader, such as Gnus, instead of receiving emails. If you choose to read the list via nntp, you can still [[http://lists.gnu.org/mailman/listinfo/emacs-orgmode][subscribe]] to the list and then opt not to receive any emails on the mailman settings page (see the "Mail Delivery" setting). This will ensure that your messages to the list get through quickly, reduce the work load of the mailing list moderators (who need to clear every mail from non-members), and provide more accurate information about the number of list readers. * Keeping current :PROPERTIES: :CUSTOM_ID: Keeping-current :END: ** My Emacs ships with an older version Org-mode! How do I upgrade? :PROPERTIES: :CUSTOM_ID: updating-org :END: #+index: Upgrade Org-mode develops quickly, which means that versions of Org-mode shipped with Emacs are more or less out-of-date. If you'd like to upgrade to the most recent version of org-mode, you have a number of options. 1. Download the [[http://orgmode.org/index.html#sec-3][most recent release]] of org-mode as zip or tarball and follow the [[http://orgmode.org/manual/Installation.html#Installation][installation instructions]] in the manual. 2. Clone and install the development git repository as [[#keeping-current-with-Org-mode-development][explained here]]. If you don't want to run the bleeding edge, you can still use git [[#using-stable-releases-only][to track the most recent stable releases]]. 3. Install and updated org-mode automatically through the Emacs Package Manager as [[#installing-via-elpa][explained in this FAQ]]. ** How do I keep current with bleeding edge development? :PROPERTIES: :CUSTOM_ID: keeping-current-with-Org-mode-development :END: #+index: Bleeding Edge Org-mode is developed in [[http://en.wikipedia.org/wiki/Git_(software)][Git]]. You can keep up-to-date with Org-mode developement by cloning the Org-mode repository and refreshing your copy with latest changes whenever you wish. You only need to use two Git commands (clone and pull.) Here are the steps in brief (please customize locations to suit your setup): 1. Select a location to house the Org-mode repository (approx. 40 MB; includes documentation, compiled elisp files and history going all the way back to v4.12a) : $mkdir$HOME/elisp && cd $HOME/elisp 2. Clone the Org-mode Git repository. Recommended approach: :$ git clone git://orgmode.org/org-mode.git You can also clone from this mirror (lagging one hour behind orgmode.org repo): : $git clone git://repo.or.cz/org-mode.git For those of you behind a firewall that allows only HTTP, you can clone like this (can be somewhat slow), either from orgmode.org or from repo.or.cz: :$ git clone http://orgmode.org/org-mode.git : $git clone http://repo.or.cz/r/org-mode.git 3. Compile and install Org-mode and build documentation. :$ cd org-mode && make && make doc && make install Please note that you can choose to /not/ compile at all and run using source =.el= files only. Compiled files speed things up. Also note that running =make install= is necessary only if you'd like to install org-mode system-wide. 4. This is where you configure Org-mode with Emacs. Please refer to [[./org-tutorials/index.org][Org tutorials]]. 5. Keeping up-to-date. Cloning the repository is a one time activity. From this point onwards you only need to /pull/ the latest changes. : $cd$HOME/elisp/org-mode and then : $git pull && make clean && make && make doc && make install 6. You should restart Org-mode to have the changes take effect (if you are not rebooting Emacs.) Also since the intention is to "keep up" with Org-mode, you should visit updated sections of documentation for latest updates (use =git log=.) 7. As you use your repository over time it will accumulate loose objects. You can reduce the total size of your git repository with :$ git gc which will consolidate loose git objects into pack files. This reduces the size of the repository and speeds up data access to the objects. ** How do I update the info manual pages to the latest org-mode version? :PROPERTIES: :CUSTOM_ID: update-info-manual-to-latest :END: Since org-mode already ships with Emacs, a rather common problem among users is "How do I update the info documentation to the latest version of org-mode?". There are three ways to achieve this: 1. You can set the =INFOPATH= environment variable in your login script like this: #+begin_src shell-script :eval no # ~/.bash_profile export INFOPATH=/path/to/org-mode/info:$INFOPATH ... #+end_src =/path/to/org-mode/info= is wherever you install org-mode. 2. You can achieve the same with elisp like this: #+begin_src emacs-lisp :eval no ;; Info directory (add-to-list 'Info-default-directory-list (expand-file-name "/path/to/org-mode/info")) #+end_src 3. You can also specify this in the Makefile while installing org-mode like this: #+begin_src makefile-gmake :eval no # Where local software is found prefix=/path/to/emacs-root ... # Where info files go. infodir =$(prefix)/share/info #+end_src After you install org-mode with =make install=, you can now install the new info files with =make install-info=. Note that this method _overwrites_ the old org-mode info files that is distributed with your version of GNU Emacs. ** How can I keep local changes and still track Org-mode development? :PROPERTIES: :CUSTOM_ID: keeping-local-changes-current-with-Org-mode-development :END: Say you want to make minor changes to the Makefile to reflect your location for =emacs=. Create a local branch for your changes on top of origin/master as follows: : $git checkout -b local origin/master :$ git config branch.local.rebase true : # Make your changes to the Makefile and create a new commit : $git add Makefile :$ git commit -m 'My local Makefile configurations' : # Update git to a newer version : $git pull Now each time you pull new commits from the distribution repository your local commits will be rewound and replayed on top of the new origin/master. ----------- You would normally work on your =local= branch which includes your custom commits; there's no need to switch back to the =master= branch. ----------- Here is an example of dealing with conflict resolution during git pull. If you get a conflict during a =git pull= you will need to edit the file with the conflict to fix up the conflicting lines and then tell git that you have resolved the conflict. Conflict resolution goes something like this: 1. =git pull= fails with a conflict 2. edit the file 3. =git add= the file to mark the conflict resolved 4. =git rebase --continue= 5. lather, rinse, and repeat 2-4 as needed For this example we have the following Makefile: : # : # Example Makefile : # : : EMACS=emacs : : VERSION=V1.0 and we need to change the =EMACS=emacs= line to =EMACS=myemacs= to make it work well on our system. To do this we - create a local branch for our work :$ git checkout -b local origin/master : $git config branch.local.rebase true This marks the branch so that all local commits on it are rebased on top of any new commits we get in origin/master during a =git pull= operation. - Make our custom changes Edit the makefile so it looks like this: : # : # Example Makefile : # : : EMACS=myemacs : : VERSION=V1.0 - Create a commit with our custom changes :$ git add Makefile : $git commit -m 'My local Makefile configurations' - Later we do a =git pull= but that fails with conflicts. :$ git pull : remote: Counting objects: 5, done. : ... : Patch failed at 0001. : : When you have resolved this problem run "git rebase --continue". : If you would prefer to skip this patch, instead run "git rebase --skip". : To restore the original branch and stop rebasing run "git rebase --abort". - Fix the conflict in your favourite editor Conflict markers look like this: : <<<<<<< HEAD:Makefile : EMACS=emacs22 : ======= : EMACS=myemacs : >>>>>>> Change emacs location:Makefile This attempted =git pull= caused a conflict. Fire up your favourite editor and fix the conflict in the Makefile. The conflict markers are <<<<<<<<<< , ======= , and >>>>>>>>>>. Fix the Makefile appropriately and delete the conflict markers. You already edited these lines earlier so fixing it should be trivial. In this case we changed =EMACS=emacs= to =EMACS=myemacs= and upstream changed =EMACS=emacs= to =EMACS=emacs22=. Just fix the file and save it by deleting the conflict markers and keeping the code you need (in this case the =EMACS=myemacs= line which we originally modified.) - Mark the file's conflict resolved : $git add Makefile You use =git add= because you are adding new content to be tracked - you're not adding a file, but you are adding changes in content. - Continue the rebase operation :$ git rebase --continue If any other conflicts arise you fix them the same way - edit the file, mark the conflict resolved, and continue. At anytime during the rebase conflict resolution you can say "oops this is all wrong - put it back the way it was before I did a pull" using : $git rebase --abort ** How can I use a stable release version instead of the bleeding edge master? :PROPERTIES: :CUSTOM_ID: using-stable-releases-only :END: The master branch of the git repository always contains the bleeding edge development code. This is important for Org's fast development, because code on master gets checked out by many people daily and we quickly receive bug reports if something is wrong. On rare occasions, this code may not function perfectly for a limited time while we are trying to fix things. Not everyone like to use this bleeding-edge code and face the danger to hit a surprising bug. Therefore, from time to time, we make a release. This typically happens when the maintainers feel that 1. they have reached a good point in the development 2. the code has a feature set that should stay and be supported in the future Stable releases are used as the basis for [[http://orgmode.org/index.html#sec-3_3][alternative distributions]] of Org, and they are also the code that gets merged into the Emacs distribution. If you want to work only with stable releases, you can always download [[http://orgmode.org/index.html#sec-3][them here]], but you can also also use the git repository to keep automatically up-to-date with the most recent stable releases (and save bandwidth!). Here's how to do so: *** Run a specific stable release In the repository, do :$ git fetch --tags : $git tag To see which release tags are available. Let's say you decide to use =release_7.01f=. :$ git checkout release_7.01f This set the working tree of the repository to the state of Org at the moment of release 7.01f. You can then run Org from the repository be sure to use the stable release while development continues on the master branch. Later, when we release 7.02, you can switch to that using : $git fetch --tags # to get all the new stuff :$ git tag : $git checkout release_7.02 *** Always run the most recent stable release Alternatively, if you just want to always run whatever the latest stable release is, you can do :$ git checkout -b stable origin/maint and then regularly update this branch by doing : $git pull ** How can I install an up-to-date version of org-mode without "make" tools? :PROPERTIES: :CUSTOM_ID: installing-org-without-make-tools :END: If you are using org-mode on a computer that lacks developer tools for compiling software, such as [[http://www.gnu.org/software/make/][GNU Make]], you will have to use a *different* installation method than [[http://orgmode.org/manual/Installation.html#Installation][the one outlined in the manual]]. Please see [[http://article.gmane.org/gmane.emacs.orgmode/15264][this thread]] on the mailing list for several different ways you can install a recent version of org-mode without using the customary =make clean && make && make install=. The result of that discussion is the file/function found in [[http://orgmode.org/worg/org-hacks.html#compiling-org-without-make]]. ** I don't use git. Can I download bleeding edge .zip and .tar.gz archives? Yes. You can download [[http://orgmode.org/org-latest.zip][org-latest.zip]] or [[http://orgmode.org/org-latest.tar.gz][org-latest.tar.gz]] of Org-mode -- these archives are udpated every day at midnight. Alternatively, you can download a [[http://orgmode.org/w/org-mode.git/snapshot][tar.gz snapshot from orgmode.org]]. ** How do I install Org-mode through Emacs' Package Manager? :PROPERTIES: :CUSTOM_ID: installing-via-elpa :END: Daily builds of Org-mode is distributed as an ELPA package from both [[http://elpa.gnu.org/packages/][GNU Emacs Lisp Package Archive]] as well as from [[http://orgmode.org/pkg/daily/][Org-mode Emacs Lisp Archive]]. Steps for installing Org with package manager: 1) Do =M-x list-packages= to browse available packages. 2) If the above command is unavailable you need to [[#installing-elpa][install the package manager]] before proceeding ahead. 3) If you see =org= as an available package, skip to step 5. 4) If you are here it means that org is unavailable in the GNU's archives. Report this discrepancy to [[mailto:emacs-orgmode@gnu.org][Orgmode mailing list.]] In the meanwhile, you can manually download the tarball and install it. Refer [[Installing%20from%20ELPA-tar][this FAQ entry]] for further information. 5) Press =i= to mark the package for installation 6) Press =x= to install 7) Reload Emacs 8) Use =M-x locate-library RET org=. If your installation is successful you would something like the following: =Library is file ~/.emacs.d/elpa/org-20110403/org.elc= # 7) If you get the following error "*Failed to download Org-mode' # archive.*" in step 2, you can manually download the tarball and # install it. Refer [[Installing from ELPA-tar][this FAQ entry]] for more information. # # 8) Add Orgmode as a package archive. This can be done in two ways: # 9) Use =M-x customize-variable RET package-archives= # 10) Add the following line to your =.emacs= and reload Emacs. # #+begin_src emacs-lisp # (add-to-list 'package-archives '("Org-mode" . "http://orgmode.org/pkg/daily/")) # #+end_src # ** How do I install Emacs package manager? :PROPERTIES: :CUSTOM_ID: installing-elpa :END: If you are running Emacs 24 or find the command =M-x list-packages= available you already have the package manager installed. Steps for installing package manager on emacs-23: 1. Download the package manager [[http://repo.or.cz/w/emacs.git/blob_plain/1a0a666f94:/lisp/emacs-lisp/package.el][package.el]] 2. Add the following to your =.emacs= and reload Emacs. #+begin_src emacs-lisp ;; change "~/elisp/" as appropiate (setq load-path (cons "~/elisp" load-path)) ;; Add the below lines *at the end* of your .emacs. This ;; ensures that packages installed with package manager ;; overrides other local installation (require 'package) (package-initialize) #+end_src ** I don't see Org-mode as an installation option in Package Manager Menu? :PROPERTIES: :CUSTOM_ID: why-no-org-in-elpa :END: Emacs Package Manager is a very recent addition to Emacs. Work is under way to have have Org-mode seamlessly integrate with Emacs' Package Manager. As a result, it will be some time before the Org-mode packages are available and usable from either GNU or Org-mode package archives. In the meanwhile, you can install Org-mode via package manager through ELPA-compatible tar. Refer [[Installing from ELPA-tar][this FAQ entry]] for more information. ** How do I install Org-mode from a ELPA-compatible tarball? :PROPERTIES: :CUSTOM_ID: installing-from-elpa-tarball :END: # <> #+index: ELPA Org-mode is distributed as an ELPA-compatible tar which can be used in conjunction with Emacs' package manager. 1. If you are already running Org-mode, note the current version reported by M-x org-version. 2. Download the latest tarball from [[http://orgmode.org/pkg/daily/][Org-mode repo]]. 3. Do =M-x package-install-file=. When prompted for =Package file name=, point it to .tar file downloaded in step 2. You will now see Package Manager compiling the files and installing it. 4. Reload emacs. This step is very important. 5. Note the version of the new installation using M-x org-version. If the new and old versions are different, the installation is done and you are all set to enjoy the updated Org-mode. Otherwise skip to step 6. 6. Review you load-path using =C-h v load-path=. Most likely that your old installation path takes precedence over the path chosen by package manager (which is typically =~/.emacs.d/elpa/...=). Fix this anamoly by moving =(package-initialize)= line in .emacs to a more appropriate location. - Additional Note on =org-install.el= :: Functionality of Org-mode's =org-install.el= is supplanted by Package Manager's =org-autoloads.el=. Since Package Manager autoloads Org-mode for you, the following line =(require 'org-install)= in your =.emacs= is no longer required and can be safely removed. ** Why would I use ELPA tarballs instead of the snapshot tarballs? :PROPERTIES: :CUSTOM_ID: why-elpa :END: #+index: ELPA ELPA-tarballs automate much the process of upgrading org-mode. Much of the following grunt work is done automatically by the Package Manager: 1. Downloading, compiling, and activating of org-mode (including setting org-mode's =load-path= and autoloads). 2. Updating info files. * Setup :PROPERTIES: :CUSTOM_ID: Setup :END: #+index: Setup ** How can I quickly browse all Org options? #+index: Options =M-x org-customize RET= See also [[file:org-tutorials/org-customize.org][Carsten's Org customize tutorial]] and [[file:org-configs/org-customization-guide.org][this customization guide]] for details. ** Can I use the editing features of org-mode in other modes? :PROPERTIES: :CUSTOM_ID: use-editing-features-in-other-modes :END: Not really---but there are a few editing features you can use in other modes. - For tables there is =orgtbl-mode= which implements the table editor as a minor mode. (To enable, type =M-x orgtbl-mode=) - For ordered lists there is =orgstruct-mode= which allows for easy list editing as a minor mode. (To enable, type =M-x orgstruct-mode=) You can activate these modes automatically by using hooks: : (add-hook 'mail-mode-hook 'turn-on-orgtbl) : (add-hook 'mail-mode-hook 'turn-on-orgstruct) For footnotes, there is the function =org-footnote-action=, which works in non-org buffers. This function is a powerful tool for creating and sorting footnotes. To use it globally, you can add the following keybinding to your =.emacs= file (requires Org 6.17 or greater): : (global-set-key (kbd "C-c f") 'org-footnote-action) For other features you need to switch to Org-mode temporarily, or prepare text in a different buffer. ** Why isn't feature "X" working the way it is described in the manual? :PROPERTIES: :CUSTOM_ID: making-sure-org-mode-is-up-to-date :END: Org-mode develops very quickly. If you are using a version of Org-mode that shipped with emacs, there is a good chance that it is somewhat out of date. Many of the users on the Org-mode mailing list are using either a recent release of Org-mode or the [[http://orgmode.org/index.html#sec-3.2][development version of org-mode from the git repository]]. If some settings and features aren't working the way you expect, make sure that the version of the manual you are consulting matches the version of Org-mode you are using. - You can check which version of Org-mode you are using by selection =Org --> Documentation --> Show Version= in the Emacs menu. - The [[http://orgmode.org/manual/index.html][online manual]] at [[http://orgmode.org][orgmode.org]] corresponds to the most recent release. - The [[http://www.gnu.org/software/emacs/manual/html_node/org/index.html][manual]] at [[http://www.gnu.org][www.gnu.org]] corresponds to the version of Org-mode released with the latest official Gnu Emacs release. Compared with the manual at the orgmode.org, the manual at www.gnu.org is somewhat out of date. For instructions on how to stay current with Org-mode, consult [[keeping-current-with-Org-mode-development][this FAQ]] or follow the instructions on [[http://orgmode.org][the official Org-mode site]]. ** Can I get the visibility-cycling features in outline-mode and outline-minor-mode? :PROPERTIES: :CUSTOM_ID: use-visibility-cycling-in-outline-mode :END: #+index: Visibility!Cycling Yes, these functions are written in a way that they are independent of the outline setup. The following setup provides standard Org-mode functionality in outline-mode on =TAB= and =S-TAB=. For outline-minor-mode, we use =C-TAB= instead of =TAB=, because =TAB= usually has mode-specific tasks. #+BEGIN_SRC emacs-lisp (add-hook 'outline-minor-mode-hook (lambda () (define-key outline-minor-mode-map [(control tab)] 'org-cycle) (define-key outline-minor-mode-map [(shift tab)] 'org-global-cycle))) (add-hook 'outline-mode-hook (lambda () (define-key outline-mode-map [(tab)] 'org-cycle) (define-key outline-mode-map [(shift tab)] 'org-global-cycle))) #+END_SRC Or check out /outline-magic.el/, which does this and also provides promotion and demotion functionality. /outline-magic.el/ is available at [[http://www.astro.uva.nl/~dominik/Tools/outline-magic.el][Outline Magic]]. ** Can I save/restore the visibility state of an org-mode buffer? :PROPERTIES: :CUSTOM_ID: saving-visibility-state :END: #+index: Visibility!Restore Well, no---at least not automatically. You can, however, control the visibility of an org-file or of individual trees by adding instructions to your org file. See [[http://orgmode.org/manual/Visibility-cycling.html#Visibility-cycling][this section of the manual]] for more information. ** How can I keep track of changes in my Org files? :PROPERTIES: :CUSTOM_ID: track-of-changes-in-Org-files :END: Use git to track the history of the files, use a cronjob to check in changes regularly. Such a setup is described by Bernt Hansen in [[http://article.gmane.org/gmane.emacs.orgmode/6233][this message]] on [[http://dir.gmane.org/gmane.emacs.orgmode][emacs-orgmode]]. ** Can I use Org-mode as the default mode for all README files? :PROPERTIES: :CUSTOM_ID: Org-mode-as-default-mode :END: #+index: default-major-mode Add the following to your .emacs file: : (add-to-list 'auto-mode-alist '("README$" . org-mode)) You can even make it the default mode for any files with unspecified mode using : (setq default-major-mode 'org-mode) ** Can I use ido.el for completing stuff in Org? :PROPERTIES: :CUSTOM_ID: ido-complete :END: #+index: Ido Yes, you can. If you are an ido user and ido-mode is active, the following setting will make Org use =ido-completing-read= for most of its completing prompts. : (setq org-completion-use-ido t) ** Should I use one big org file or multiple files? :PROPERTIES: :CUSTOM_ID: how-to-organize-org-mode-files :END: Org-mode is flexible enough to accomodate a variety of organizational and time management schemes. Org's [[http://orgmode.org/manual/Document-Structure.html#Document-Structure][outline cycling and convenient editing and navigation commands]] make it possible to maintain all of your projects and notes in a single file. But org-mode's [[http://orgmode.org/manual/Hyperlinks.html#Hyperlinks][quick and easy hyperlinks]], along with [[http://orgmode.org/manual/Refiling-notes.html#Refiling-notes][easy refiling of notes and todos]], also make it a delight to maintain a private "wiki" consisting of multiple files. No matter how you organize your org files, org-mode's agenda commands make it easy to search all your notes and gather together crucial data in a single view. Moreover, several org-mode settings can be configured either globally in your =.emacs= file or locally (per file or per outline tree). See the [[http://orgmode.org/manual/index.html#Top][manual]] for more details. For an example of local customizations see [[limit-agenda-with-category-match][this FAQ]]. Here are a few ideas for organizing org-mode files: - A single file for all your projects and notes. - One file per project. - One file per client. - One file per area of responsibility or type of work (e.g., household, health, work, etc.). - One file for projects, one for appointments, one for reference material, one for someday/maybe items, etc. - A wiki of hyperlinked files that grows and adapts to meet your needs. For more ideas, see some of the links on the [[file:org-tutorials/index.org][org-tutorial index]] or [[file:org-gtd-etc.org][this page on org-mode and GTD]]. ** Why doesn't C-c a call the agenda? Why don't some org keybindings work? :PROPERTIES: :CUSTOM_ID: setting-global-keybindings :END: Org-mode has a few global keybindings that the user must set explicitly in an =.emacs= file. These keybindings include the customary shortcut for calling the agenda (=C-c a=). If nothing happens when you type =C-c a=, then make sure that the following lines are in your =.emacs= file: #+BEGIN_SRC emacs-lisp ;; The following lines are always needed. Choose your own keys. (add-to-list 'auto-mode-alist '("\\.org\\'" . org-mode)) (global-set-key "\C-cl" 'org-store-link) (global-set-key "\C-ca" 'org-agenda) (global-set-key "\C-cb" 'org-iswitchb) #+END_SRC emacs-lisp You may, of course, choose whatever keybindings work best for you and do not conflict with other modes. Please see [[http://orgmode.org/manual/Activation.html][this section of the manual]] if you have additional questions. ** Why aren't some of the variables I've customized having an effect? :PROPERTIES: :CUSTOM_ID: load-org-after-setting-variables :END: Some org variables have to be set before org.el is loaded or else they will not work. (An example is the new variable =org-enforce-todo-dependencies=.) To make sure all your variables work you should not use =(require 'org)=. Instead use the following setting: : (require 'org-install) You should also make sure that you do not require any other =org-...= files in your =.emacs= file before you have set your org variables, since these will also cause org.el to be loaded. To be safe, load org files *after* you have set your variables. ** How can I make sure that timestamps appear in English? :PROPERTIES: :CUSTOM_ID: timestamps-and-system-time-locale :END: If your system's locale is not set to English, but you would like the timestamps in your org-mode files to appear in English, you can set the following variable: #+begin_src emacs-lisp (setq system-time-locale "C") #+end_src ** What does a minimal .emacs look like? :PROPERTIES: :CUSTOM_ID: minimal-emacs :END: Using a stripped down minimal .emacs files removes broken custom settings as the cause of an issue and makes it easy to reproduce for other people. The example below has system-specific paths that you'll need to change for your own use. #+begin_src emacs-lisp (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp")) (add-to-list 'auto-mode-alist '("\\.\$$org\\ |org_archive\\|txt\$$$" . org-mode)) (setq org-agenda-files '("/tmp/test.org")) (require 'org-install) (require 'org-habit) (global-set-key "\C-cl" 'org-store-link) (global-set-key "\C-ca" 'org-agenda) (global-set-key "\C-cb" 'org-iswitchb) #+end_src You can save the minimal .emacs file to ~/minimal.emacs, add suspect configuration code to it, then start emacs something like this: #+begin_src sh emacs -Q -l ~/minimal.emacs #+end_src On OS X, starting emacs with minimal configuration might look something like this: #+begin_src sh /Applications/emacs.app/Contents/MacOS/Emacs -Q -l ~/minimal.emacs #+end_src sh ** Can I migrate from Planner? Yes. This [[http://www.c0t0d0s0.de/plan2org/plan2org.pl][perl script]] or [[http://gitorious.org/bkuhn-small-hacks/org-mode/blobs/master/planner2org.plx ][this Perl script]] can help. * Errors and general problems :PROPERTIES: :CUSTOM_ID: Errors :END: ** Opening Org files in Emacs leads to a crash :PROPERTIES: :CUSTOM_ID: Emacs-crashes-with-org-indent-mode :END: The only known case where Org-mode can crash Emacs is when you are using =org-indent-mode= with Emacs 23.1 (in fact, any version of Emacs before version 23.1.50.3). Upgrade to Emacs 23.2 and the problem should go away. ** When I try to use Org-mode, I always get the error message =(wrong-type-argument keymapp nil)= :PROPERTIES: :CUSTOM_ID: wrong-type-argument-keymapp :END: This is a conflict with an outdated version of the /allout.el/, see the [[http://orgmode.org/manual/Conflicts.html#Conflicts][Conflicts]] section in the manual ** How can I control the application launched by Org-mode to open a certain file type like pdf, html...? :PROPERTIES: :CUSTOM_ID: external-application-launched-to-open-file-link :END: If you want special control about how Org-mode opens files, see the variables =org-file-apps=, =org-file-apps-defaults-gnu=, =org-file-apps-defaults-macosx=, =org-file-apps-defaults-windowsnt=. *However*, normally it is best to just use the mechanism the operating-system provides: *** GNU/Linux systems You you have to check your mailcap settings, find the files: : /etc/mailcap : : or : :$HOME/.mailcap and modify them accordingly. Please read their manual entry. *** Windows systems + for html pages you may configure the =browse-url-= variables through the Customize interface, + the pdf files are automatically opened with Acrobat Reader (if it is installed) *** Mac OSX Change the application responsible for this file type by selecting such a file in the Finder, select =File->Get Info= from the menu and select the application to open this file with. Then, to propagate the change to all files with the same extension, select the =Change all= button. ** Org-mode takes over the TAB key. I also want to use YASnippet, is there a way to fix this conflict? :PROPERTIES: :CUSTOM_ID: YASnippet :END: [[http://code.google.com/p/yasnippet/][yasnippet]] is yet another snippet expansion system for Emacs. It is inspired by TextMate's templating syntax. - watch the [[http://www.youtube.com/watch?v=vOj7btx3ATg][video on YouTube]] - see the [[http://yasnippet.googlecode.com/svn/trunk/doc/index.html][intro and tutorial]] *Note*: yasnippet is not compatible with =org-indent-mode= currently there is no known way to use both successfully with =yas/trigger-key= set to =TAB= (or =[tab]= etc...) The way Org-mode binds the =TAB= key (binding to =[tab]= instead of =\t=) overrules yasnippets' access to this key. The following code fixes this problem: #+begin_src emacs-lisp (add-hook 'org-mode-hook (lambda () (org-set-local 'yas/trigger-key [tab]) (define-key yas/keymap [tab] 'yas/next-field-group))) #+end_src If the above code doesn't work (which it may not with later versions of yasnippet). Then try the following #+begin_src emacs-lisp (defun yas/org-very-safe-expand () (let ((yas/fallback-behavior 'return-nil)) (yas/expand))) (add-hook 'org-mode-hook (lambda () ;; yasnippet (using the new org-cycle hooks) (make-variable-buffer-local 'yas/trigger-key) (setq yas/trigger-key [tab]) (add-to-list 'org-tab-first-hook 'yas/org-very-safe-expand) (define-key yas/keymap [tab] 'yas/next-field))) #+end_src Rick Moynihan maintains a [[http://github.com/RickMoynihan/yasnippet-org-mode][git repository]] (or [[http://github.com/eschulte/yasnippet-org-mode][Eric's fork of the same]]) with YASnippets for Org-mode. ** Org-mode takes over the S-cursor keys. I also want to use CUA-mode, is there a way to fix this conflict? :PROPERTIES: :CUSTOM_ID: CUA-mode :END: Yes, see the [[http://orgmode.org/manual/Conflicts.html#Conflicts][Conflicts]] section of the manual. ** Org-mode takes over the S-cursor keys. I also want to use windmove.el, is there a way to fix this conflict? :PROPERTIES: :CUSTOM_ID: windmove.el :END: Yes, see the [[http://orgmode.org/manual/Conflicts.html#Conflicts][Conflicts]] section of the manual. ** Org behaves strangely: some keys don't work, some features are missing, my settings have no effect, ... :PROPERTIES: :CUSTOM_ID: loaded-old-org :END: When this sort of things happen, it probably is because Emacs is loading an old version of Org-mode instead of the one you expected. Check it with =M-x org-version=. This happens because Emacs loads first the system org-mode (the one included with Emacs) before the one in your directory. Check the =load-path= variable; you might see that your org-mode appears /after/ the system-wide path; this is bad. You should add your directories to the =load-path= at the beginning: : (add-to-list 'load-path "~/.emacs.d/org-mode/lisp") (require 'org-install) Function =add-to-list= adds at the beginning. Don't use =append= because it appends at the end. Also be sure to use =(require 'org-install)= and not =(require 'org)=. This wrong version loading may also happen if you have a byte-compiled =org.elc= from an old version together with a new =org.el=. Since Emacs prefers loading byte-compiled files (even if the =.el= is newer), it will load the old Org-mode. ** Why doesn't org-batch-agenda work under Win32? :PROPERTIES: :CUSTOM_ID: org-batch-agenda-under-win32 :END: When I run the example batch files to print my agenda to the console under Win32 I get the failure: : End of file during parsing and no agenda is printed. The problem is the use of single quotes surrounding the eval in the emacs command-line. This gets confused under Win32. All string parameters with spaces must be surrounded in double quotes. This means that double quotes being passed to the eval must be escaped. Therefore, instead of the following: : \emacs.exe -batch -l ~/_emacs_org \ : -eval '(org-batch-agenda "a")' you need to use the following: : \emacs.exe -batch -l ~/_emacs_org \ : -eval "(org-batch-agenda \"a\")" (all on one line, of course). ** Org agenda seems very slow :PROPERTIES: :CUSTOM_ID: slow-agenda :END: If it takes a long time to generate or refresh the agenda, you might want first check which version of org-mode you are using. There have been major optimizations of org-agenda since 6.21b, which was the version of org-mode released with Emacs 23. If you are using 6.21b or earlier (you can check with =M-x org-version=), then you might want to consider upgrading to a more recent version of org-mode. Here are some other ideas for speeding up the agenda: 1. Use a one day agenda view (rather than a seven day view). =(setq org-agenda-ndays 1)= 2. Archive inactive items to separate files. =C-c C-x C-s= (org-archive-subtree) 3. Do not include the global todo list in your agenda view. (setq org-agenda-include-all-todo nil) 4. Make sure that your org files are byte-compiled. I.e., make sure there are files ending in =.elc= in your org installation directory. 5. Limit your agenda files (=org-agenda-files=) to files that have active todos and or projects. If you have a number of older reference files---i.e., files you search only occasionally---in your agenda files list, consider removing them from your agenda files and adding them to =org-agenda-text-search-extra-files= instead. Similarly, you might consider searching some of your older reference files with =M-x grep= so that Org-mode does not have to load them into memory when the agenda is called. ** Visual-line-mode doesn't work well with Org-mode :PROPERTIES: :CUSTOM_ID: visual-line-mode :END: Visual-line-mode "soft wraps" lines so that the visual edge of the buffer is considered a line break for purposes of navigation, even though there is no line break in reality. In older versions of org-mode, org-beginning-of-line and org-end-of-line do not work well with visual line mode. (The two commands disregard soft line breaks and move to the beginning and end of the hard line break.) A patch was introduces to fix this behavior in July of 2009. If you are using an older version of Org-mode, you can: 1. Add a hook to turn off visual line mode. 2. Add the following to your =.emacs=: #+begin_src emacs-lisp (add-hook 'org-mode-hook (lambda () (define-key org-mode-map "\C-a" 'move-beginning-of-line) (define-key org-mode-map "\C-e" 'move-end-of-line))) #+end_src ** Can I hide blocks at startup? Yes: #+begin_src emacs-lisp (setq org-hide-block-startup t) #+end_src Or use #+begin_src org ,#+STARTUP: hideblocks #+end_src on a per-file basis. ** After updating Org I get an error about an =invalid function= :PROPERTIES: :CUSTOM_ID: invalid-function-error :END: In almost all cases an =invalid function= error is caused by an unclean Org-mode source directory. Cleaning it up and recompiling should fix the problem : cd /path/to/orgmode : make clean : make * Faces and highlighting :PROPERTIES: :CUSTOM_ID: Faces :END: ** Org-mode has a lot of colors? How can I change them? :PROPERTIES: :CUSTOM_ID: customizing-org-faces :END: #+index: Faces This is a question that applies to Emacs as a whole, but it comes up quite frequently on the org-mode mailing list, so it is appropriate to discuss it here. If you would like to change the style of a face in org-mode (or any other Emacs mode), simply type =M-x customize-face [RET]= while the cursor is on the color/style you are interested in modifying. You will be given the opportunity to customize all the faces located at that point. If you would like an overview of all the faces in org-mode, you can type =C-u M-x list-faces-display [RET] org= and you will be shown all the faces defined by org-mode along with an illustration of their current settings. If you would like to customize org-faces and other aspects of org-appearance, type =M-x customize-group org-font-lock [RET]=. Finally, if you would like verbose information about the properties of the text under the cursor, you can type =C-u C-x ==. See the Worg page on [[file:org-tutorials/org-appearance.org][customizing Org appearance]] for further information. ** Why do I get a tiny font in column view when using emacs daemon? :PROPERTIES: :CUSTOM_ID: column-view-tiny-font :END: #+index: Column view When using emacs in daemon mode (=emacs --daemon=), client frames sometimes override the column view face settings, resulting in very small fonts. Here is a fix: #+begin_src emacs-lisp (defun org-column-view-uses-fixed-width-face () ;; copy from org-faces.el (when (fboundp 'set-face-attribute) ;; Make sure that a fixed-width face is used when we have a column ;; table. (set-face-attribute 'org-column nil :height (face-attribute 'default :height) :family (face-attribute 'default :family)))) (when (and (fboundp 'daemonp) (daemonp)) (add-hook 'org-mode-hook 'org-column-view-uses-fixed-width-face)) #+end_src This fix was provided in the following mailing list post: http://article.gmane.org/gmane.emacs.orgmode/27560 ** How can I stop the mouse cursor from highlighting lines in the agenda? :PROPERTIES: :CUSTOM_ID: ratpoison-for-agenda-highlighting :END: #+index: Highlighting You can add the following to your =.emacs=: #+begin_src emacs-lisp (add-hook 'org-finalize-agenda-hook (lambda () (remove-text-properties (point-min) (point-max) '(mouse-face t)))) #+end_src * Outline :PROPERTIES: :CUSTOM_ID: Outline :END: ** Can I close an outline section without starting a new section? :PROPERTIES: :CUSTOM_ID: closing-outline-sections :END: #+index: Outline Can I have nested, closed outline sections, similar to xml? This question comes up quite frequently on the mailing list. See the following threads: - http://permalink.gmane.org/gmane.emacs.orgmode/40182 - http://permalink.gmane.org/gmane.emacs.orgmode/36719 - http://permalink.gmane.org/gmane.emacs.orgmode/24092 - http://permalink.gmane.org/gmane.emacs.orgmode/12425 The desired behavior looks something like this: #+begin_src org ,* Section one ,Some text ,** Subsection one ,Some text ,** Subsection two ,Some text ,# end Subsection Two ,Continue text in section one. #+end_src The short answer to the question is no. Org-mode adheres to the cascading logic of outlines, in which a section is closed only by another section that occupies an equal or greater level. Here are some workarounds: 1. You can use inline tasks to create non-folding subsections. See the documentation in org-inlinetask.el, which is part of the org-mode distribution. 2. You can create a temporary heading, such as "** Continue main section" and then remove it when you are ready to export. 3. You can create a separate outline heading (e.g., * ACTIONS), creating TODOs there with links to the relevant sections of your main text. ** Can I add a TODO to a list item? :PROPERTIES: :CUSTOM_ID: list-item-as-todo :END: No. When generating agenda views, org-mode treats only headlines as TODO items. You can, however, use a status cookie together with checkboxes to monitor your progress on a series of subtasks: #+begin_src org ,** TODO Big task [1/3] , - [X] Subtask 1 , - [ ] Subtask 2 , - [ ] Subtask 3 #+end_src If you would like to embed a TODO within text without treating it as an outline heading, you can use inline tasks. Simply add... : (require 'org-inlinetask) ...to your =.emacs= and then type C-c C-x C-t to insert an inline task. ** Can I have two windows on the same Org-mode file, with different outline visibilities? :PROPERTIES: :CUSTOM_ID: indirect-buffers :END: You may use /indirect buffers/ which do exactly this. See the documentation on the command =make-indirect-buffer=. Org-mode has built-in commands that allow you create an indirect buffer from a subtree of an outline. To open a subtree in new window, type =C-c C-x b=. Any changes you make in the new window will be saved to the original file, but the visibility of both buffers will remain independent of one another. For multiple indirect buffers from the same file, you must use the prefix =C-u= when creating the second (or third) buffer. Otherwise the new indirect buffer will replace the old. You can also create an independent view of an outline subtree by typing =b= on an item in the agenda. ** Emacs outlines are unreadable. Can I get rid of all those stars? :PROPERTIES: :CUSTOM_ID: Emacs-outlines-are-unreadable :END: See the section [[http://orgmode.org/manual/Clean-view.html#Clean-view][Clean outline view]] in the manual. ** C-k is killing whole subtrees! I lost my work! :PROPERTIES: :CUSTOM_ID: C-k-is-killing-subtrees :END: =(setq org-ctrl-k-protect-subtree t)= before losing your work. ** Why aren't commands working on regions? :PROPERTIES: :CUSTOM_ID: transient-mark-mode :END: Some org-mode commands, such as M-right and M-left for demoting or promoting headlines (see [[demote-multiple-headlines][this FAQ]]), can be applied to entire regions. These commands, however, will only work on active regions set with [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Transient-Mark.html#Transient-Mark][transient mark mode]]. Transient mark mode is enabled by default in Emacs 23. To enable it in earlier versions of emacs, put the following in your =.emacs= file: : (transient-mark-mode 1) Alternatively, you may turn off transient mark mode and use [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Momentary-Mark.html][a momentary mark]] (=C- C-=). ** Why is a blank line inserted after headlines and list items? :PROPERTIES: :ID: 2463F4D8-F686-4CF3-AA07-08976F8A4972 :CUSTOM_ID: blank-line-after-headlines-and-list-items :END: #+index: Blank In org-mode, typing =M-RET= at the end of a headline will create a new headline of the same level on a new line. The same is true for plain lists. By default org-mode uses context to determine if a blank line should be inserted after each headline or plain list item when =M-RET= is pressed. For instance, if a there is a blank line before a headline, then typing =M-RET= at the end of the line will insert a blank line before the new headline. For instance, hitting =M-RET= at the end of "Headline Two" below inserts a new headline without a blank line: : ** Headline One : ** Headline Two : ** If there is a blank line between Headline One and Headline Two, however, the results will be as follows: : ** Headline One : : ** Headline Two : : ** If you do not like the default behavior you can change it with the variable =org-blank-before-new-entry=. You can set headings and/or plain lists to auto (the default setting), t (always), or nil (never). ** How can I promote or demote multiple headlines at once? :PROPERTIES: :CUSTOM_ID: demote-multiple-headlines :END: #+index: Promote!Multiple #+index: Demote!Multiple If you have a long list of first level headlines that you'd like to demote to second level headlines, you can select the headlines as a region and then hit =M-= to demote all the headlines at once. Note: =M-S-= will not work on a selected region. Its use is to demote a single subtree (i.e., a headline and all sub-headlines). If M- doesn't seem to work, make sure transient mark mode is enabled. See [[transient-mark-mode][this FAQ]]. ** What's the deal with all the ellipses in my org outlines? :PROPERTIES: :CUSTOM_ID: org-ellipses :END: #+index: Ellipsis Org-mode uses ellipses to indicate folded (and thus hidden) text. Most commonly, ellispes occur at the end of headings with folded content: : * Heading ... Or, for instance, they may indicate closed drawers: : :PROPERTIES: ... Sometimes, as a result of editing and cycling an outline, ellipses may appear in unexpected places. You should *never* delete these ellipses, as you may accidentally delete hidden text. Instead, you can type =C-c C-r= (org-reveal) to display all hidden text in the vicinity. Or you may type =M-x RET show-all= to reveal all text in the org file. If you would prefer a symbol or face for indicating hidden text, you can customize the variable org-ellipses. ** How do I yank a subtree so it's indented according to the point's location? :PROPERTIES: :CUSTOM_ID: yank-indent-subtree :END: #+index: Indentation You can either use =C-c C-w= with a working [[http://orgmode.org/manual/Refiling-notes.html#Refiling-notes][refile-targets]] setup. Or set =org-yank-adjusted-subtrees= to =t= which will adjust the yanked headline's level correctly. Just use =C-k= and =C-y= as you would everywhere else in Emacs. ** Can I read org-mode outlines in vim? :PROPERTIES: :CUSTOM_ID: org-outlines-in-vim :END: #+index: Vim Yes, there is a script that enables one to view and navigate folded outline/org files in vim (though without most of org-mode's functionality, of course). - [[http://www.vim.org/scripts/script.php?script_id%3D1266][Emacs outline mode - Imitates Emacsen : vim online]] For instructions on how to set it up, please see [[http://mid.gmane.org/EA275862-B97A-4BAC-B879-177FD07A2D56@gaillourdet.net][this mailing list post]]. Work is also underway on an org-mode clone for Vim. You can check it out on git hub: https://github.com/hsitz/VimOrganizer ** Can I use another character than "*" to start a headline? No. The "*" character is used in =outline-mode=, and Org is derived from =outline-mode=. If you are curious as to what other rationales there are for "*", check out [[http://permalink.gmane.org/gmane.emacs.orgmode/44271][this]] mail and the thread it is in. * Todos and Tags :PROPERTIES: :CUSTOM_ID: Todos-and-Tags :END: ** How can I cycle through the TODO keyword of an entry? :PROPERTIES: :CUSTOM_ID: cycle-TODO-keywords :END: #+index: Cycling!Todo =C-c C-t= or =S-= is what you need. ** How do I track state changes for tasks in Org? :PROPERTIES: :CUSTOM_ID: track-state-changes-for-tasks :END: #+index: Logging Take a look at the [[http://thread.gmane.org/gmane.emacs.orgmode/6082][post by Bernt Hansen]] for setting up TODO keyword states and logging timestamps for task state changes. ** Can I select the TODO keywords with a tag-like interface? :PROPERTIES: :CUSTOM_ID: select-TODO-keywords-with-tag-like-interface :END: #+index: Tag!Fast selection Yes. Use =(setq org-use-fast-todo-selection t)= If you want to set both your todos and your tags using a single interface, then check out the variable =org-fast-tag-selection-include-todo=. See [[http://orgmode.org/manual/Fast-access-to-TODO-states.html][this section of the manual]] for more details. ** How can I quickly set the tag of an entry? :PROPERTIES: :CUSTOM_ID: quickly-set-tag-of-entry :END: #+index: Tag!Set Use =C-c C-c= or =C-c C-q= on the headline. =C-c C-q= is useful for setting tabs in a [[http://orgmode.org/manual/Remember.html#Remember][remember]] buffer, since =C-c C-c= is the default keybinding for filing a note from the remember buffer. You can set tags even more quickly by setting one of the character shortcuts for [[http://orgmode.org/manual/Setting-tags.html#Setting-tags][fast tag selection]]. To set tag shortcuts for all org buffers, put something like the following in your =.emacs= file (or create the same settings by typing =M-x customize-variable RET org-tag-alist=): : (setq org-tag-alist '(("computer" . ?c) ("office" . ?o) ("home" . ?h))) To set tag shortcuts for a single buffer, put something like the following at the top of your org file: : #+TAGS: computer(c) office(o) home(h) ** How can I change the colors of TODO keywords? #+index: Faces!Todo You can use the variable =org-todo-keyword-faces=. Here are some sample settings: #+begin_src emacs-lisp (setq org-todo-keyword-faces '( ("TODO" . (:foreground "firebrick2" :weight bold)) ("WAITING" . (:foreground "olivedrab" :weight bold)) ("LATER" . (:foreground "sienna" :weight bold)) ("PROJECT" . (:foreground "steelblue" :weight bold)) ("DONE" . (:foreground "forestgreen" :weight bold)) ("MAYBE" . (:foreground "dimgrey" :weight bold)) ("CANCELED" . shadow) )) #+end_src If you want to change the color of all active todos or all inactive todos, type: : M-x customize-face RET org-todo : M-x customize-face RET org-done You can also set values for each of these in your =.emacs= file: : (set-face-foreground 'org-todo "firebrick2") : (set-face-foreground 'org-done "forestgreen") ** Can I use a arbitrary character in a TODO keyword? Yes, provided you add it to the "word" syntax in Emacs. For example, to add the =\u25b6= and the =\u25b8= chars, just add this to your Emacs configuration: #+begin_src emacs-lisp (add-hook 'org-mode-hook (lambda () (modify-syntax-entry (string-to-char "\u25b6") "w") (modify-syntax-entry (string-to-char "\u25b8") "w"))) #+end_src ** How do I arrange for an item to be automatically marked DONE when all checkboxes are checked? #+index: Checkbox This has arisen a couple of time (e.g. http://thread.gmane.org/gmane.emacs.orgmode/42715 and http://thread.gmane.org/gmane.emacs.orgmode/47363) in the mailing list. An item consists of a list with checkboxes. When all of the checkboxes are checked, the item should be considered complete and its TODO state should be automatically changed to DONE. The code below does that. This version is slightly enhanced over the one in the mailing list to reset the state back to TODO if a checkbox is unchecked. Note that the code requires that a checkbox statistics cookie be present in order for it to work. Note also that it is too dumb to figure out whether the item has a TODO state in the first place: if there is a statistics cookie, a TODO/DONE state will be added willy-nilly any time that the statistics cookie is changed. #+begin_src emacs-lisp ;; see http://thread.gmane.org/gmane.emacs.orgmode/42715 (add-to-list 'org-checkbox-statistics-hook (function ndk/checkbox-list-complete)) (defun ndk/checkbox-list-complete () (save-excursion (org-back-to-heading t) (let ((beg (point)) end) (end-of-line) (setq end (point)) (goto-char beg) (if (re-search-forward "\$\$$[0-9]*%\$$\$\\|\$\$$[0-9]*\$$/\$$[0-9]*\$$\$" end t) (if (match-end 1) (if (equal (match-string 1) "100%") ;; all done - do the state change (org-todo 'done) (org-todo 'todo)) (if (and (> (match-end 2) (match-beginning 2)) (equal (match-string 2) (match-string 3))) (org-todo 'done) (org-todo 'todo)))))))) #+end_src * Hyperlinks :PROPERTIES: :CUSTOM_ID: Hyperlinks :END: ** Why do I have to confirm the execution of each shell/elisp link? :PROPERTIES: :CUSTOM_ID: confirm-shell/elisp-link :END: #+index: Link!Shell #+index: Link!Elisp The confirmation is there to protect you from unwantingly execute potentially dangerous commands. For example, imagine a link : [[shell:rm -rf ~/*][Google Search]] In an Org-mode buffer, this command would look like /Google Search/, but really it would remove your home directory. If you wish, you can make it easier to respond to the query by setting : (setq org-confirm-shell-link-function 'y-or-n-p : org-confirm-elisp-link-function 'y-or-n-p). Then a single keypress will be enough to confirm those links. It is also possible to turn off this check entirely, but I strongly recommend against this. Be warned. ** Can I use RET or TAB to follow a link? :PROPERTIES: :CUSTOM_ID: RET-or-TAB-to-follow-link :END: #+index: Link!Follow Yes, this is how: : (setq org-return-follows-link t) : (setq org-tab-follows-link t) ** Can I keep mouse-1 clicks from following a link? :PROPERTIES: :CUSTOM_ID: mouse-1-following-link :END: Activating links with =mouse-1= is a new feature in Emacs 22, to make link behavior similar to other applications like web browsers. If you hold the mouse button down a bit longer, the cursor will be set without following the link. If you cannot get used to this behavior, you can (as in Emacs 21) use =mouse-2= to follow links and turn off link activation for =mouse-1= with : (setq org-mouse-1-follows-link nil) ** How can I get completion of file names when creating a link? :PROPERTIES: :CUSTOM_ID: completion-of-file-links :END: #+index: Link!Completion You can use org-insert-link with a prefix argument: : C-u C-c C-l You will be greeted with prompt in the minibuffer that allows for file completion using your preferred Emacs method for finding files. ** How can I use invisible targets within lists? :PROPERTIES: :CUSTOM_ID: invisible-targets-in-lists :END: #+index: Target!Invisible The usual way of turning radio links invisible is to comment them, but Org comments need to be at the beginning of the line, which breaks list indentation. The workaround here is to add (INVISIBLE) after your <> For example: : 11. <>(INVISIBLE) : Some text : 12. More text [[target][go to]] ** Org-mode is not opening mailto links in my default mail client :PROPERTIES: :CUSTOM_ID: mailto-links :END: #+index: Link!Mailto You can customize the function org-mode uses to open mailto links by setting the variable =org-link-mailto-program=: =M-x customize-variable org-link-mailto-program= The default function called is =browse-url=, which opens a mail composition buffer within Emacs. The type of buffer opened by browse-url depends on the setting of the variable =mail-user-agent=. Thus, if you want to ensure that mailto links use Gnus to open a message buffer, you could add the following to your =.emacs=: #+begin_src elisp (setq mail-user-agent 'gnus-user-agent) #+end_src ** Can I use CamelCase links? :PROPERTIES: :CUSTOM_ID: CamelCase-links :END: #+index: Link!CamelCase Yes, you can with the contributed package =org-wikinodes.el=. Please consult the [[http://orgmode.org/worg/org-contrib/org-wikinodes.html][documentation]]. * Plain Lists :PROPERTIES: :CUSTOM_ID: Plain-Lists :END: ** How can I insert an empty line before each newly inserted headline, but not before each newly inserted plain-list item? :PROPERTIES: :CUSTOM_ID: empty-line-before-each-new-headline-but-not-item :END: : (setq org-blank-before-new-entry : '((heading . t) (plain-list-item . nil)) See also [[id:2463F4D8-F686-4CF3-AA07-08976F8A4972][Why is a blank line inserted after headlines and list items?]]. ** How can I convert itemized lists to enumerated lists? :PROPERTIES: :CUSTOM_ID: convert-itemized-to-enumerated-lists :END: #+index: List!Itemized #+index: List!Enumerated You can use =C-c -= or =S-/= to cycle through the various bullet headlines available for lists: =-, +, *, 1., 1)=. See [[http://orgmode.org/manual/Plain-lists.html#Plain-lists][this section of the manual]] for more information. ** How can I convert plain lists to headlines and vice versa? :PROPERTIES: :CUSTOM_ID: convert-plain-lists-to-headlines :END: #+index: List!Plain #+index: Headline To convert a plain list item or line to a headline, type =C-c *= on the headline. This will make the line a subheading of the current headline. To convert a headline to a plain list item, type =C-c -= while the cursor is on the headline. To convert a headline to an unadorned line of text, type =C-c *= on the headline. You can use query replace to accomplish the same things, as Bernt Hansen explains in [[http://article.gmane.org/gmane.emacs.orgmode/10148][this mailing list post]]. ** Is there a good way to create a description list? :PROPERTIES: :CUSTOM_ID: description-lists :END: #+index: List!Description Yes, these are now built-in: #+BEGIN_EXAMPLE - item1 :: Description of this item 1 - item2 :: Description of this item 2 - item1 :: Description of this item 3 also in multiple lines #+END_EXAMPLE * Tables :PROPERTIES: :CUSTOM_ID: Tables :END: ** Will there ever be support for multiple lines in a table field? :PROPERTIES: :CUSTOM_ID: table-multiline-fields :END: No. You can embed tables created with the =table.el= package in org-mode buffers, with mixed success when it comes to export and publishing. ** How can I make table alignment work with Asian character sets :PROPERTIES: :CUSTOM_ID: table-alignment-asian-characters :END: #+index: Table!Alignment When table alignment fails, it usually has to do with character sets where some characters have non-integer width. Org will deal correctly with characters that are one or two or three ASCII characters wide, but not with characters that are, for example, 1.5 ASCII characters wide. To make table alignment work you need to switch to a different character set. ** Can I plot data from a table? :PROPERTIES: :CUSTOM_ID: plotting-table-data :END: #+index: Table!Plot #+index: Table!Data #+index: Plot Yes, you can, using org-plot.el written by Eric Schulte and now bundled with Org. See [[http://orgmode.org/manual/Org_002dPlot.html#Org-Plot][the manual section about this]]. See also [[file:org-tutorials/org-plot.org][this excellent tutorial]] by Eric Schulte. ** How can I fill a table column with incremental numbers? :PROPERTIES: :CUSTOM_ID: fill-table-column-with-incremental-numbers :END: #+index: Table!Fill Here is how: Use a field formula to set the first value in the column: #+begin_src org ,| N | | ,|-----+---| ,| :=1 | | ,| | | ,| | | ,| | | ,#+TBLFM: @2$1=1 #+end_src Then define a column formula in the second field: #+begin_src org ,| N | | ,|----------+---| ,| 1 | | ,| =@-1 + 1 | | ,| | | ,| | | ,#+TBLFM: @2$1=1 #+end_src After recomputing the table, the column will be filled with incremental numbers: #+begin_src org ,| N | | ,|---+---| ,| 1 | | ,| 2 | | ,| 3 | | ,| 4 | | ,#+TBLFM: $1=@-1 + 1::@2$1=1 #+end_src Note that you could use arbitrary starting values and column formulas. ** Why does my table column get filled with #ERROR? :PROPERTIES: :CUSTOM_ID: table-column-filled-with-ERROR :END: #+index: Table!#ERROR Org-mode tried to compute the column from other fields using a formula stored in the =#+TBLFM:= line just below the table, and the evaluation of the formula fails. Fix the fields used in the formula, or fix the formula, or remove it! ** How can I stop the table editor from creating new lines? :PROPERTIES: :CUSTOM_ID: table-editor-creates-new-lines :END: When I am in the last column of a table and just above a horizontal line in the table, pressing TAB creates a new table line before the horizontal line. To move to the line below the horizontal line instead, do this: Press =down= (to get on the separator line) and then =TAB=. Or configure the variable : (setq org-table-tab-jumps-over-hlines t) ** How can I get table fields starting with "="? :PROPERTIES: :CUSTOM_ID: table-fields-starting-with-= :END: With the setting : (setq org-table-formula-evaluate-inline nil) this will no longer happen. You can still use formulas using the commands ~C-c =~ and ~C-u C-c =~ ** How can I get a vertical bar "|" inside a table field? :PROPERTIES: :CUSTOM_ID: table-fields-with-vertical-bar :END: You can use =\vert= to put a vertical bar inside a table field. This will be converted for export. To use it inside a word use =abc\vert{}def=. If you need something that looks like a bar in the Org mode buffer, you can use the unicode character brvbar which looks like this: \brvbar{}. ** How can I change the indentation of an entire table without fixing every line by hand? :PROPERTIES: :CUSTOM_ID: change-indentation-entire-table :END: #+index: Table!Indentation The indentation of a table is set by the first line. So just fix the indentation of the first line and realign with =TAB=. ** In my huge table the realigning after each TAB takes too long. What can I do? :PROPERTIES: :CUSTOM_ID: table-realigning-after-TAB-takes-long :END: #+index: Table!Realign Either split the table into several by inserting an empty line every 100 lines or so. Or turn off the automatic re-align with : (setq org-table-automatic-realign nil) After this the only way to realign a table is to press =C-c C-c=. It will no longer happen automatically, removing the corresponding delays during editing. ** Recalculation of my table takes too long. What can I do? :PROPERTIES: :CUSTOM_ID: Recalculation-of-my-table-takes-too-long :END: #+index: Table!Calculation Nothing, really. The spreadsheet in org is mostly done to make calculations possible, not so much to make them fast. Since Org-mode is firmly committed to the ASCII format, nothing is stopping you from editing the table by hand. Therefore, there is no internal representation of the data. Each time Org-mode starts a computation, it must scan the table for special lines, find the fields etc. This is slow. Furthermore, Calc is slow compared to hardware computations. To make this work with normal editing, recalculation is not happening automatically, or only for the current line, so that the long wait for a full table iteration only happens when you ask for it. So for really complex tables, moving to a "real" spreadsheet may still be the best option. That said, there are some ways to optimize things in Org-mode, and I have been thinking about moving a bit further down this line. However, for my applications this has so far not been an issue at all. If you have a good case, you could try to convince me. ** =S-RET= in a table keeps increasing the copied numbers. How can I stop this? :PROPERTIES: :CUSTOM_ID: S-RET-in-a-table-increases-copied-numbers :END: Well, it is /supposed/ to be a feature, to make it easy to create a column with increasing numbers. If this gets into your way, turn it off with : (setq org-table-copy-increment nil) ** When I export tables to HTML, they don't have borders. :PROPERTIES: :CUSTOM_ID: table-borders-in-html-export :END: #+index: Table!HTML By default, Org-mode exports tables without borders. You can changed this by placing an =#+ATTR_HTML= line before the table: : #+ATTR_HTML: border="2" rules="all" frame="all" See [[http://orgmode.org/manual/Tables-in-HTML-export.html#Tables-in-HTML-export][the manual]] for more details. ** Why does the Calc high precision (e. g. =p20=) not work like expected? :PROPERTIES: :CUSTOM_ID: table-high-precision :END: - *Short answer* Avoid : | 1 / 2 * 3 | 0.16666667000000 | : #+TBLFM: $2 =$1; p20 %.14f and use : | 1 / 2 * 3 | 0.16666666666667 | : #+TBLFM: $2 =$1 +.0; p20 f-14 - *Longer answer* It is important to distinguish between the precision of 1) =p20=: Calc internal calculation (=calc-internal-prec=) 2) =f-14=: Calc float formatting, unlimited in precision (=calc-float-format=) 3) =%.14f=: the =printf= reformatting, limited in precision See [[http://orgmode.org/manual/Formula-syntax-for-Calc.html#Formula-syntax-for-Calc][the Org manual]] (org-version 6.35 or newer) for more details. Use =C-h v org-calc-default-modes RET= to check the Org default settings which are used if no format specifiers are added to a table formula. The examples below have been made with the out_of_the_box Org defaults =calc-internal-prec = 12= and =calc-float-format = 8=. Remember the formula debugger, toggled with =C-c {=, to view the processing stages like: | | formula debugger label | processing stage | | / | < | <> | |---+------------------------+----------------------------| | | Result: | output of Calc | | | Format: | reformatting with =printf= | Following are some examples to demonstrate the interaction of the three precisions. - *display precision limitations for Calc formulas* - limited by Calc internal calculation precision from Org default (here =p12=) : | 0.16666666666700 | : #+TBLFM: $1 = 1 / 2 * 3; f-14 : | 0.1666666666670000000 | : #+TBLFM:$1 = 1 / 2 * 3; f-19 - limited by Calc float format from Org default (here =f8=) : | 0.16666667 | : #+TBLFM: $1 = 1 / 2 * 3 : | 0.16666667 | : #+TBLFM:$1 = 1 / 2 * 3; p20 : | 0.16666667000000 | : #+TBLFM: $1 = 1 / 2 * 3; %.14f : | 0.16666667000000 | : #+TBLFM:$1 = 1 / 2 * 3; p20 %.14f - limited by Calc float format specified : | 0.166667 | : #+TBLFM: $1 = 1 / 2 * 3; f-6 : | 0.16666666666667 | : #+TBLFM:$1 = 1 / 2 * 3; p20 f-14 : | 0.1666666666666666667 | : #+TBLFM: $1 = 1 / 2 * 3; p20 f-19 - limited by =printf= conversion to Emacs Lisp float : | 0.1666666699999999900 | the inaccuracy is platform dependent | : #+TBLFM:$1 = 1 / 2 * 3; %.19f : | 0.1666666699999999900 | the inaccuracy is platform dependent | : #+TBLFM: $1 = 1 / 2 * 3; p20 %.19f : | 0.1666666666666666600 | the inaccuracy is platform dependent | : #+TBLFM:$1 = 1 / 2 * 3; p20 f-20 %.19f - limited by =printf= format specified : | 0.166667 | : #+TBLFM: $1 = 1 / 2 * 3; %.6f - *display precision limitations for Emacs Lisp formulas* - limited by Emacs Lisp float : | 0.16666666666666666 | : #+TBLFM:$1 = '(/ 1.0 (* 2 3)) : | 0.1666666666666666574 | the inaccuracy is platform dependent | : #+TBLFM: $1 = '(/ 1.0 (* 2 3)); %.19f - limited by =printf= format specified : | 0.16666666666667 | : #+TBLFM:$1 = '(/ 1.0 (* 2 3)); %.14f This FAQ entry is based on this [[http://thread.gmane.org/gmane.emacs.orgmode/22642][mailing list thread]] and is continued in the [[#table-float-fraction][next FAQ entry]]. ** Which float format shows the fraction part also when the latter is zero? :PROPERTIES: :CUSTOM_ID: table-float-fraction :END: - *Short answer* Avoid : | 1 | 1 | : #+TBLFM: $2 =$1; f-3 and use : | 1 | 1.000 | : #+TBLFM: $2 =$1 +.0; f-3 - *Longer answer* For =f3= and =f-3= see =d f' (calc-fix-notation')= in [[http://www.delorie.com/gnu/docs/calc/calc.html#SEC_Top][the Calc manual]] in the section Mode Settings -> Display Modes -> Float Formats [[http://www.delorie.com/gnu/docs/calc/calc_163.html][found here as long as the section numbering is unchanged]]. Remember the formula debugger, toggled with =C-c {=, to view the processing stages like: | | formula debugger label | processing stage | | / | < | <> | |---+------------------------+----------------------------| | | Result: | output of Calc | | | Format: | reformatting with =printf= | Following are some examples to demonstrate different float formats. - normal precision : |-----------+---------+-------+---------+----------+-------| : | number | f3 | f-3 | +.0; f3 | +.0; f-3 | %.3f | : |-----------+---------+-------+---------+----------+-------| : | 1 | 1 | 1 | 1.000 | 1.000 | 1.000 | : | 0 | 0 | 0 | 0.000 | 0.000 | 0.000 | : |-----------+---------+-------+---------+----------+-------| : | 1.0 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | : | 0.0 | 0.000 | 0.000 | 0.000 | 0.000 | 0.000 | : |-----------+---------+-------+---------+----------+-------| : | 1.0001666 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | : | 0.0001666 | 1.67e-4 | 0.000 | 1.67e-4 | 0.000 | 0.000 | : |-----------+---------+-------+---------+----------+-------| : | 1.0016666 | 1.002 | 1.002 | 1.002 | 1.002 | 1.002 | : | 0.0016666 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | : |-----------+---------+-------+---------+----------+-------| : #+TBLFM: $2 =$1; f3 :: $3 =$1; f-3 :: $4 =$1 +.0; f3 :: $5 =$1 +.0; f-3 :: $6 =$1; %.3f - high precision : |----------------------+--------------------------+-----------------------| : | number | f19 | f-19 | : |----------------------+--------------------------+-----------------------| : | 1 | 1 | 1 | : | 0 | 0 | 0 | : |----------------------+--------------------------+-----------------------| : | 1.0 | 1.0000000000 | 1.0000000000 | : | 0.0 | 0.0000000000 | 0.0000000000 | : |----------------------+--------------------------+-----------------------| : | 1 + 1 / 2 * 3 * 1e19 | 1.0000000000 | 1.0000000000 | : | 0 + 1 / 2 * 3 * 1e19 | 1.6666666666-20 | 0.0000000000 | : |----------------------+--------------------------+-----------------------| : | 1 + 1 / 2 * 3 * 1e18 | 1.0000000000000000002 | 1.0000000000000000002 | : | 0 + 1 / 2 * 3 * 1e18 | 0.0000000000000000002 | 0.0000000000000000002 | : |----------------------+--------------------------+-----------------------| : #+TBLFM: $2 =$1; p20 f19 :: $3 =$1; p20 f-19 : |----------------------+--------------------------+-----------------------| : | number | +.0; f19 | +.0; f-19 | : |----------------------+--------------------------+-----------------------| : | 1 | 1.0000000000 | 1.0000000000 | : | 0 | 0.0000000000 | 0.0000000000 | : |----------------------+--------------------------+-----------------------| : | 1.0 | 1.0000000000 | 1.0000000000 | : | 0.0 | 0.0000000000 | 0.0000000000 | : |----------------------+--------------------------+-----------------------| : | 1 + 1 / 2 * 3 * 1e19 | 1.0000000000 | 1.0000000000 | : | 0 + 1 / 2 * 3 * 1e19 | 1.6666666666-20 | 0.0000000000 | : |----------------------+--------------------------+-----------------------| : | 1 + 1 / 2 * 3 * 1e18 | 1.0000000000000000002 | 1.0000000000000000002 | : | 0 + 1 / 2 * 3 * 1e18 | 0.0000000000000000002 | 0.0000000000000000002 | : |----------------------+--------------------------+-----------------------| : #+TBLFM: $2 =$1 +.0; p20 f19 :: $3 =$1 +.0; p20 f-19 The =printf= reformatting (=%.19f=) cannot be used with high precision, see the [[#table-high-precision][previous FAQ entry]]. ** How can I center tables in LaTeX output? :PROPERTIES: :CATEGORY: centered-tables-in-latex :END: #+index: Table!Center Set the org-export-latex-tables-centered' to t': : (defcustom org-export-latex-tables-centered t : "When non-nil, tables are exported in a center environment." : :group 'org-export-latex : :type 'boolean) * Markup :PROPERTIES: :CUSTOM_ID: Footnotes :END: ** How can I get automatic renumbering of footnotes in org-mode? :PROPERTIES: :CUSTOM_ID: footnote-auto-adjust :END: #+index: Footnotes!Renumbering You can add the following line to your .emacs file: : (setq org-footnote-auto-adjust t) Or, if you prefer, you can turn this option on locally by placing the following line at the top of your org file: : #+STARTUP: fnadjust When auto-adjust is turned on, footnotes in the file with numerical labels will be renumbered whenever a new footnote is added. Meanwhile, all footnotes, including those with custom labels such =[fn:custom-label ]=, will be sorted in the order of their appearance in the text. This emulates the footnote behavior that many users may be familiar with from word-processing programs or from the footnote-mode included with emacs. If you do not turn on org-footnote-auto-adjust, you sort and/or renumber footnotes at any time by calling org-footnote-action with a prefix argument. ** Why isn't auto renumbering of footnotes turned on by default? :PROPERTIES: :CUSTOM_ID: why-no-default-auto-adjust :END: Org-mode has a very robust footnote mechanism allowing for a variety of types of footnotes. With some of the following footnote notations, auto-adjust may be either irrelevant or undesired: - Automatically numbered - Footnotes with custom labels - Inline footnotes In addition, Org-mode can be customized to place footnotes either at the end of a document or at the end of the outline heading in which they appear. Users who change this setting while editing a document may be disconcerted to find all of their footnotes rearranged automatically. ** I have auto-fill-mode set and org-mode is inserting unwanted comment markers! :PROPERTIES: :CUSTOM_ID: auto-fill-and-unwanted-comments :END: If the following occurs: #+begin_src org ,#+OPTIONS: toc:nil ,Some entered text. ,# More entered tex. #+end_src Make sure that the variable comment-start is nil. ** Are there any shortcuts for entering source blocks and comment lines? :PROPERTIES: :CUSTOM_ID: shortcuts-for-entering-source-blocks :END: Org-mode has some [[http://orgmode.org/manual/Literal-examples.html#Literal-examples][very convenient markup]] for including literal blocks and lines of code in a file. (This is especially useful when exporting documents or using the contributed package [[file:org-contrib/babel/index.org][org-babel]] for executing blocks of code.) #+begin_src org ,#+begin_src perl , print "Hello, world!\n"; ,#+end_src #+end_src It can be tiresome to enter the block comment lines manually. There are several possible shortcuts you can use to enter them: 1) Built-in expansion - Org-mode has a "secret" method of expanding source code blocks and comment lines. - If you type "> #+index: DEADLINE!Warning Deadline warnings appear in the daily agenda view a specified number of days before the deadline is due. The default setting is 14 days. You can change this with the variable =org-deadline-warning-days=. (See [[http://orgmode.org/manual/Deadlines-and-scheduling.html#Deadlines-and-scheduling][this section]] of the manual.) For instance, : (setq org-deadline-warning-days 30) would cause warnings for each deadline to appear 30 days in advance. Naturally, you might not want warnings for all of your deadlines to appear so far in advance. Thus, you can change the lead time for individual items as follows: : * TODO Get a gift for the party : DEADLINE: <2009-01-16 Fri -2d> The "-2d" above changes the lead time for this deadline warning to two days in advance. You can also use "w" for weeks and "m" for months. ** How can I postpone a task until a certain date? :PROPERTIES: :CUSTOM_ID: deferring-tasks :END: #+index: Postpone The easiest way to postpone a task is to schedule it in the future. For instance, typing =C-c C-s +2w= on a headline will push a task two weeks into the future, so that it won't show up on the daily agenda until two weeks from now. If you'd like to prevent the task from showing up on your global todo list, you have a couple of options. 1. You can set the variable =org-agenda-todo-ignore-scheduled= to =t=. This will exclude any scheduled items from your global list of active todos (=C-c a t=). (The variable =org-agenda-todo-ignore-with-date= will exclude both scheduled and deadline items from your todo list). 2. You can remove the todo keyword from the item (C-c C-t ). The item will still appear on your agenda two weeks from today, but it won't show up on your todo lists. ** Can I send myself an email containing tasks or other agenda info? :PROPERTIES: :CUSTOM_ID: email-containing-tasks-or-other-agenda-info :END: Yes. See [[http://article.gmane.org/gmane.emacs.orgmode/6112][this thread]] on the list. ** How can I limit the agenda view to my "work" tasks? :PROPERTIES: :CUSTOM_ID: limit-agenda-with-tag-filtering :END: #+index: FILETAGS It is often convenient to group org files into separate categories, such as "home" and "work" (or "personal" and "professional"). One of the main reasons for such classification is to create agenda views that are limited by type of work or area of responsibility. For instance, while at work, one may want to see only professional tasks; while away from work, one may want to see only personal tasks. One way to categorize files and tasks is to use a "#+FILETAGS" declaration at the top of each file, such as: : #+FILETAGS: work As long as org-use-tag-inheritance is turned on, the filetags will be inherited by all tasks in the file. A file can have multiple filetags. And, of course, tags can be added to individual headings. Tasks can be quickly filtered by tag from within the agenda by typing "/" and the name of the tag. The full key sequence to filter for work items in an agenda view would be: : C-c a a / work [or a tag shortcut] ** How can I limit the agenda view to a particular category? :PROPERTIES: :CUSTOM_ID: limit-agenda-with-category-match :END: #+index: Agenda view!Category Another way to filter agenda views by type of work is to use a "#+CATEGORY" declaration at the top of each file, such as: : #+CATEGORY: work Categories can also be added to individual headings within a file: : * Big project : :PROPERTIES: : :CATEGORY: work : :END: All todos belonging to the category "work" can be found a with a simple tags-todo search: : C-c a M At the prompt, type: : CATEGORY="work" The same results can be achieved with custom agenda commands, such as: #+BEGIN_SRC emacs-lisp (setq org-agenda-custom-commands '(("h" tags-todo "CATEGORY=\"home\"") ("w" tags-todo "CATEGORY=\"work\"") ;; other custom agenda commands here )) #+END_SRC ** How can include all org files in a directory in my agenda? :PROPERTIES: :CUSTOM_ID: set-agenda-files-using-wildcards :END: #+index: Agenda!Directory You can simply include the directory (as one of the items) in the value of the variable org-agenda-files: : (setq org-agenda-files '("/my/special/path/org/")) There is another way of accomplishing the same end: : (setq org-agenda-files (file-expand-wildcards "/my/special/path/org/*.org")) ** Why aren't items disappearing from my agenda once they are marked done? :PROPERTIES: :CUSTOM_ID: removing-done-items-from-agenda :END: If items remain on your daily/weekly agenda after they are marked done, check the configuration of the following variables: : org-agenda-skip-scheduled-if-done : org-agenda-skip-deadline-if-done : org-agenda-skip-timestamp-if-done For instance, type: : M-x customize-variable RET org-agenda-skip-scheduled-if-done If this variable is turned off (=nil=), then scheduled items will remain on the agenda even after they are marked done. If the variable is turned on (=t=), then scheduled items will disappear from the agenda after they are marked done. If these settings seem not to behave the way you expect, then make sure you understand [[scheduled-vs-deadline-vs-timestamp][the difference between SCHEDULED, DEADLINE, and timestamps]]. ** How do I keep repeating timestamps from being displayed multiple times? :PROPERTIES: :CUSTOM_ID: repeating-timestamps-show-once :END: #+index: Timestamp!Repeating To show only the /current/ instance of a repeating timestamp, put the following in your .emacs: #+begin_src emacs-lisp (setq org-agenda-repeating-timestamp-show-all nil) #+end_src ** What is the difference between SCHEDULED, DEADLINE, and plain timestamps? :PROPERTIES: :CUSTOM_ID: scheduled-vs-deadline-vs-timestamp :END: #+index: SCHEDULED #+index: DEADLINE #+index: Timestamp 1. SCHEDULED items (set with =C-c C-s=) will appear on your agenda on the day they are scheduled and on every day thereafter until they are done. Schedule a task if you want to be reminded to do something beginning on a certain day and until it is done. : ** TODO Scheduled item : SCHEDULED: <2009-03-01 Sun> 2. Items with a DEADLINE timestamp (set with =C-c C-d=) appear on your agenda in advance of the when they are due and remain on your agenda until they are done. Add a DEADLINE to an item if you want to make sure to complete it by a certain date. (The variable org-deadline-warning-days determines how far in advance items with deadlines will show up in the agenda. See [[warning-period-for-deadlines][this FAQ]] for more information.) : ** TODO Item with a deadline : DEADLINE: <2009-01-20 Tue> 3. An active timestamp (set with =C-c .=) will appear on your agenda only on the day it is scheduled. Use a timestamp for appointments or any reminders you want to show up only on a particular day. : ** TODO Item with an active timestamp : <2009-04-18 Sat> Note: items with inactive timestamps (set with C-c ! and marked by square brackets) will not show up in the agenda at all. ** Can I add files recursively to my list of agenda files? :PROPERTIES: :CUSTOM_ID: set-agenda-files-recursively :END: Yes, you can use the library =find-lisp=. : (load-library "find-lisp") : (setq org-agenda-files (find-lisp-find-files "~/org" "\.org")) This will add all files ending in =org= in the directory "~/org" and all of its subdirectories to your list of agenda files. If on a *nix machine, you can also use the find utility, which can be faster than the find-lisp library: : (setq org-agenda-files : (mapcar 'abbreviate-file-name : (split-string : (shell-command-to-string "find ~/org -name \"*.org\"") "\n"))) See [[http://thread.gmane.org/gmane.emacs.orgmode/8992][this thread]] on the mailing list for more information. ** Why does an item appearing at the wrong time of day in my agenda? :PROPERTIES: :CUSTOM_ID: agenda-wrong-time-of-day :END: When preparing the agenda view, org-mode scans each relevant headline for a time designation. This approach is very nice for adding free-form timestamps to an item for scheduling. Thus, either of the following work would work to schedule an item at 10:00am: #+begin_src org ,** 10:00am Get dried ice at the magic store , SCHEDULED: <2009-05-27 Wed> #+end_src #+begin_src org ,** Get dried ice at the magic store , SCHEDULED: <2009-05-27 Wed 10:00> #+end_src To enable this flexibility, org-mode scans the entire headline for time of day notation. A potential problem can arise if you use inactive timestamps in the headline to note when an item was created. For example : #+begin_src org ,** Get dried ice at the magic store [2009-05-26 Tue 12:58] , SCHEDULED: <2009-05-27 Wed> #+end_src Org-mode would interpret the time in the inactive timestamp as a time-of-day indicator and the entry would appear in your agenda at 12:58. If you would like to turn off the time-of-day search, you can configure the variable =org-agenda-search-headline-for-time= (requires org-mode >= 6.24). ** How can I change the visibility of an item from the agenda? :PROPERTIES: :CUSTOM_ID: cycling-visibility-from-agenda :END: #+index: Agenda!Visibility You can add a keybinding as follows: #+begin_src emacs-lisp (add-hook 'org-agenda-mode-hook (lambda () (define-key org-agenda-mode-map " " 'org-agenda-cycle-show))) #+end_src Then, as you press SPACE on an item on the agenda, it will cycle the visibility of its original location. ** Is there any way to set org-mode so that tags don't appear in the agenda view? See the =org-agenda-remove-tags= variable. ** I work late at night! How can I extend my current day past midnight? :PROPERTIES: :CUSTOM_ID: org-extend-today-until :END: If you work past midnight, you may not want your daily agenda view to switch to the next day at 12 a.m. (the default). To extend your day, simply set the value of org-extend-today-until to a positive number corresponding to the number of hours you work past midnight. For example, the following setting will cause the current day to extend until 6 a.m. : (setq org-extend-today-until 6) * Appointments/Diary :PROPERTIES: :CUSTOM_ID: Appointments/Diary :END: ** Is it possible to include entries from org-mode files into my emacs diary? :PROPERTIES: :CUSTOM_ID: include-entries-from-org-mode-files-into-emacs-diary :END: #+index: Diary Since the org-mode agenda is much more powerful and can contain the diary, you should think twice before deciding to do this. If you insist, however, integrating Org-mode information into the diary is possible. You need to turn on /fancy diary display/ by setting in .emacs: : (add-hook 'diary-display-hook 'diary-fancy-display) Then include the following line into your ~/diary file, in order to get the entries from all files listed in the variable =org-agenda-files= : &%%(org-diary) You may also select specific files with : &%%(org-diary) ~/path/to/some/org-file.org : &%%(org-diary) ~/path/to/another/org-file.org If you now launch the calendar and press ~d~ to display a diary, the headlines of entries containing a timestamp, date range, schedule, or deadline referring to the selected date will be listed. Just like Org-mode's agenda view, the diary for /today/ contains additional entries for overdue deadlines and scheduled items. See also the documentation of the =org-diary= function. Under XEmacs, it is not possible to jump back from the diary to the org, this works only in the agenda buffer. ** I want to add my Org scheduled/deadlined entries in my diary! :PROPERTIES: :CUSTOM_ID: add-Org-scheduled/deadlined-entries-to-diary! :END: Put this in your ~/.diary: : &%%(org-diary :scheduled :timestamp :deadline) ** How can I set up automatic reminders based on Org information? :PROPERTIES: :CUSTOM_ID: automatic-reminders :END: #+index: Reminders See [[http://article.gmane.org/gmane.emacs.orgmode/5271][this post]] by N. Dokos on the list. See also Russell Adams's hack in [[file:org-hacks.org::#agenda-appt-zenity][org-hacks]]. ** How can I make =appt= notice my Org appointments? :PROPERTIES: :CUSTOM_ID: appt-notice-my-Org-appointments :END: #+index: Appointment #+index: Appt : M-x org-agenda-to-appt RET ** How can I create more complex appointments in my org-files? :PROPERTIES: :CUSTOM_ID: diary-sexp-in-org-files :END: #+index: Appointment Org-mode's active timestamps work very well for scheduling individual or recurring appointments, such as: #+begin_src org ,* 8:00am Dentist appointment <2009-01-16 Fri> #+end_src or #+begin_src org ,* Vacation , <2009-03-20 Fri>--<2009-04-01 Wed> #+end_src or #+begin_src org ,* Weekly meeting with boss , <2009-01-20 Tue 14:00 +1w> #+end_src Sometimes, however, you need to set up more complicated recurring appointments. Org-mode has built-in support for many of [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Sexp-Diary-Entries.html][the powerful sexp entries]] that work in [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Diary.html#Diary][Emacs diary]]. Let's say, for instance, that you teach a class that meets every Monday evening between February 16 and April 20, 2009. The way to enter this an org-mode file is: #+begin_src org ,** Class 7:00pm-9:00pm , <%%(and (= 1 (calendar-day-of-week date)) (diary-block 2 16 2009 4 20 2009))> #+end_src The expression above designates all Mondays that fall between February 16 and April 20. How exactly does it work? - (and... :: Indicates that *both* of the conditions that follow have to be true. - (= 1 (calendar-day-of-week date)) :: Is the day of the week a Monday? - Note: the function calendar-day-of-week converts the date to the day of week expressed in numeric form, where 0 = Sunday, 1 = Monday, and so on. - (diary-block 2 16 2009 4 20 2009) :: Does the date fall between these two dates? You can make a sexp as complex as you like. If you wanted to omit a week because of holidays, for instance, you could add another condition to the sexp: #+begin_src org ,** Class 7:00pm-9:00pm , <%%(unless (diary-block 3 9 2009 3 13 2009) (and (= 1 (calendar-day-of-week date)) (diary-block 2 16 2009 4 20 2009)))> #+end_src The sexp above would omit Monday during the week of March 9, 2009. For another way to accomplish the same thing, see [[org-diary-class][this FAQ]]. Another diary function commonly used for more complex scheduling is diary-float. For instance, #+begin_src org ,* Monthly meeting , <%%(diary-float t 3 3)> #+end_src ... would appear on the third Wednesday of every month. For more ideas on how to create diary special expressions, see [[http://www.emacswiki.org/cgi-bin/wiki/DiaryMode][this page on the Emacs wiki]]. ** How can I schedule a weekly class that lasts for a limited period of time? :PROPERTIES: :CUSTOM_ID: org-class :END: Org-mode offers a convenient diary sexp function for setting up a recurring appointment that lasts for a certain period of time, such as a class. It is called org-class and it can be entered as follows: #+begin_src org ,** Class 7:00pm-9:00pm , <%%(org-class 2009 2 16 2009 4 20 1 10)> #+end_src The function above schedules an appointment for every Monday (1) between February 16 and April 20, 2009, except for ISO week 10 (March 1 to March 7). If you would prefer not to place the timestamp in the headline, you can use the following format: #+begin_src org ,** Class ,%%(org-class 2009 2 16 2009 4 20 1 10) 7:00pm-9:00pm Class #+end_src In this case, the string following the sexp will be displayed in the agenda. The function org-class has the following format: : (org-class Y1 M1 D1 Y2 M2 D2 DAYNAME &rest SKIP-WEEKS) Y1/2, M1/2, and D1/2 indicate the beginning and ending dates. DAYNAME takes the form of a number indicating the day of the week (0 = Sunday, 1 = Monday, and so on...). In addition, one can add an optional argument SKIP-WEEKS to indicate weeks on the calendar that should be skipped. This argument should be expressed as an ISO week number. You can find the number by invoking emacs' built-in calendar (=M-x calendar=), navigating to the appropriate week, and typing =p c (calendar-iso-print-date)=. If one of the SKIP-WEEKS is the symbol =holidays=, then any holidays known to the calendar are also skipped. Here is an alternative method, shared by Paul Sexton on the org mailing list: Let's say you are taking night classes in Spanish. The class is every Wednesday evening at 7pm, starting on 18 August, and runs for 8 weeks. Org-mode's timestamps do not support limited occurrences of recurrent items -- you have to schedule the item with infinite recurrences, then delete it when it finishes. To schedule the Spanish classes, put the following in your =.emacs=: #+begin_src emacs-lisp (defun diary-limited-cyclic (recurrences interval m d y) "For use in emacs diary. Cyclic item with limited number of recurrences. Occurs every INTERVAL days, starting on YYYY-MM-DD, for a total of RECURRENCES occasions." (let ((startdate (calendar-absolute-from-gregorian (list m d y))) (today (calendar-absolute-from-gregorian date))) (and (not (minusp (- today startdate))) (zerop (% (- today startdate) interval)) (< (floor (- today startdate) interval) recurrences)))) #+end_src The item in the org file looks like this: #+begin_src org ,** 19:00-21:00 Spanish lessons , <%%(diary-limited-cyclic 8 7 8 18 2010)> #+end_src ** How can I set an event to occur every day except Saturday and Sunday? #+begin_src org ,** Daily meeting , <%%(memq (calendar-day-of-week date) '(1 2 3 4 5))> #+end_src ** How do I schedule events relative to Easter Sunday? Easter's date moves around from year to year according to a complicated set of criteria which I do not claim to understand. However the following code will allow you to schedule recurring events relative to Easter Sunday. Note: the function da-easter is from [[http://github.com/soren/elisp/blob/master/da-kalender.el][da-kalender.el]]. Put the following in your .emacs: #+begin_src emacs-lisp (defun da-easter (year) "Calculate the date for Easter Sunday in YEAR. Returns the date in the Gregorian calendar, ie (MM DD YY) format." (let* ((century (1+ (/ year 100))) (shifted-epact (% (+ 14 (* 11 (% year 19)) (- (/ (* 3 century) 4)) (/ (+ 5 (* 8 century)) 25) (* 30 century)) 30)) (adjusted-epact (if (or (= shifted-epact 0) (and (= shifted-epact 1) (< 10 (% year 19)))) (1+ shifted-epact) shifted-epact)) (paschal-moon (- (calendar-absolute-from-gregorian (list 4 19 year)) adjusted-epact))) (calendar-dayname-on-or-before 0 (+ paschal-moon 7)))) (defun da-easter-gregorian (year) (calendar-gregorian-from-absolute (da-easter year))) (defun calendar-days-from-easter () "When used in a diary sexp, this function will calculate how many days are between the current date (DATE) and Easter Sunday." (- (calendar-absolute-from-gregorian date) (da-easter (calendar-extract-year date)))) #+end_src Now we can schedule the public holidays associated with Easter as recurring events. Good Friday is 2 days before "Easter", Easter Monday is one day after. #+begin_src org ,* Good Friday , <%%(= -2 (calendar-days-from-easter))> ,* Easter Sunday , <%%(= 0 (calendar-days-from-easter))> ,* Easter Monday , <%%(= 1 (calendar-days-from-easter))> #+end_src [Source: Posted by Paul Sexton on Org-mode mailing list.] ** How to schedule public holiday that is "the nearest Monday to DATE"? In New Zealand each regional capital has an "Anniversary Day". The date of Auckland's anniversary day is "the nearest Monday to 29 January". Put this in your =.emacs=: #+begin_src emacs-lisp (defun calendar-nearest-to (target-dayname target-day target-month) "Recurring event that occurs in the nearest TARGET-DAYNAME to the date TARGET-DAY, TARGET-MONTH each year." (interactive) (let* ((dayname (calendar-day-of-week date)) (target-date (list target-month target-day (calendar-extract-year date))) (days-diff (abs (- (calendar-day-number date) (calendar-day-number target-date))))) (and (= dayname target-dayname) (< days-diff 4)))) #+end_src Now we can schedule Auckland Anniversary Day. The first argument, 1, means Monday (days of the week are numbered starting with Sunday=0). [Source: Originally posted by Paul Sexton on Org-mode mailing list.] ** How to schedule public holiday on "the 4th Monday in October"? #+index: Holiday This does not require any additions to =.emacs=: #+begin_src org ,* Labour Day (NZ) , <%%(diary-float 10 1 4)> #+end_src ** Why isn't the agenda showing all the times I put under a single entry? :PROPERTIES: :CATEGORY: multiple-timestamps-same-entry :END: Probably because you have not set the following variable: : org-agenda-skip-additional-timestamps-same-entry The default value of this variable is t, which means that entries with multiple timestamps, such as the following... #+begin_src org ,* Work really, really hard , <2010-11-20 Sat 10:00> , <2010-11-20 Sat 14:00> #+end_src ... will only appear in the agenda at the time specified by the first timestamp. If you set =org-agenda-skip-additional-timestamps-same-entry= to nil, the item will appear will appear at all the times you specify. ** Can I import iCal events/appts from Gnus? #+index: iCal #+index: Gnus Yes. Vagn Johansen wrote [[http://ozymandias.dk/emacs/org-import-calendar.el][org-import-calendar.el]] which lets you do this. * Export :PROPERTIES: :CUSTOM_ID: Export :END: ** Can I get TODO items exported to HTML as lists, rather than as headlines? :PROPERTIES: :CUSTOM_ID: export-TODO-items-as-lists :END: #+index: Export!HTML If you plan to use ASCII or HTML export, make sure things you want to be exported as item lists are level 4 at least, even if that does mean there is a level jump. For example: : * Todays top priorities : **** TODO write a letter to xyz : **** TODO Finish the paper : **** Pick up kids at the school Alternatively, if you need a specific value for the heading/item transition in a particular file, use the =#+OPTIONS= line to configure the H switch. : #+OPTIONS: H:2; ... ** Can I export only a single subtree? :PROPERTIES: :CUSTOM_ID: export-single-subtree :END: #+index: Export!Subtree If you want to export a subtree, mark the subtree as region and then export. Marking can be done with =C-c @ C-x C-x=, for example. Alternatively, you can select option =1= in the org export dispatcher (e.g.., =C-c C-e 1 h= to export the current subtree to html). By default, the title of the exported file will be set to the heading of the subtree. You can, however, [[#export-options-for-subtree][customize the title and other export options]]. ** How can I customize export options for a single subtree? :PROPERTIES: :CUSTOM_ID: export-options-for-subtree :END: #+index: Export!Options You can set unique export options for a [[#export-single-subtree][single subtree]] by using properties. Relevant properties include: - =EXPORT_TITLE= - =EXPORT_AUTHOR= - =EXPORT_DATE= - =EXPORT_FILE_NAME= - =EXPORT_OPTIONS= (corresponds to the =#+OPTIONS:= [[http://orgmode.org/manual/Export-options.html#Export-options][configuration line]]) ** How can I tell my calendar web application about appointments in my agenda files? Here is what you need to do: 1. a script that calls Emacs in batch mode and produce a .ics file 2. a script that uploads this .ics file somewhere on the web 3. tell your webapp to fetch this .ics file on the web Here is the script I use for the first step: #+begin_src shell-script-mode #!/bin/bash /usr/local/bin/emacs --batch --eval \ "(progn (load-file \"~/install/git/org-mode/org.el\") \ (load-file \"~/elisp/config/org-batch-config.el\") \ (setq org-combined-agenda-icalendar-file \"~/org/cal/org.ics\") (setq org-agenda-files (quote (\"~/org/bzg.org\"))))" \ -f org-export-icalendar-combine-agenda-files #+end_src Depending on your configuration, you might change the load sequence. Here is the script I use for the second step: #+begin_src shell-script-mode #!/bin/bash /usr/bin/rsync -rtv ~/org/org.ics -e ssh me@my_server:/home/me/public_html/ #+end_src Note: if you want to cron this rsync script, you will need to let =my_server= to know about your SSH public key. Check [[http://troy.jdmz.net/rsync/index.html][this page]] as a starter. Now you can cron the two scripts above and your webapp will always be up to date with your Org agendas. Also see [[http://orgmode.org/org.html#Exporting-Agenda-Views][Exporting agenda views]] from Org manual. ** How can I get Mac OSX 10.3 iCal to import my org-exported .ics files? :PROPERTIES: :CUSTOM_ID: iCal-import-ics-files-old :END: #+index: .ics #+index: iCal!Mac OSX 10.3 When using iCal under Apple MacOS X Tiger, you can create a new C-e c=, see the variables =org-icalendar-combined-name= and =org-combined-agenda-icalendar-file=). Then set Org-mode to overwrite the corresponding file /~/Library/Calendars/OrgMode.ics/. You may even use AppleScript to make iCal re-read the calendar files each time a new version of /OrgMode.ics/ is produced. Here is the setup needed for this: : (setq org-combined-agenda-icalendar-file : "~/Library/Calendars/OrgMode.ics") : (add-hook 'org-after-save-iCalendar-file-hook : (lambda () : (shell-command : "osascript -e 'tell application \"iCal\" to reload calendars'"))) ** How can I get Mac OSX 10.4 or later iCal to import my Org-exported .ics files? :PROPERTIES: :CUSTOM_ID: iCal-import-ics-files-new :END: #+index: iCal!Mac OSX 10.4 For Mac OS X 10.4, you need to write the ics file to =/Library/WebServer/Documents/= and then subscribe iCalendar to =http: //localhost/orgmode.ics= ** How can I remove timestamps and todo keywords from my exported file? :PROPERTIES: :CUSTOM_ID: export-options-remove-timestamps :END: #+index: Export!Timestamps #+index: Export!Todo keywords You can place an options line at the top of your org file: : #+OPTIONS: <:nil todo:nil There is a whole host of export options you can set with an in-buffer options or via global variables. See [[http://orgmode.org/manual/Export-options.html#Export-options][this section]] of the manual for a full list. ** How can I preserve faces when I export an agenda from the command line? :PROPERTIES: :CUSTOM_ID: preserving-faces-during-batch-export :END: #+index: Export!Agenda #+index: Export!Faces Normally, when you export an org file or an agenda view from within emacs, htmlize will convert your face definitions to direct color css styles inlined into each == object, resulting in an HTML output that preserves the general look of your Org buffers and agenda views. Let's say you generate an export from the command line, such as the following: : emacs -batch -l ~/.emacs -eval '(org-batch-agenda "e")' or : emacs -batch -l ~/.emacs -eval '(org-publish-all)' In such an instance, the exported HTML will contain only very basic color styles. The reason is that when Emacs is run in batch mode, it does not have a display and therefore only rudimentary face definitions. If you'd like to use more complex styles, you'll have to make sure that the export process only assigns classes instead of direct color values. This can be done by binding the variable =org-export-htmlize-output-style= to =css= for the duration of the export, for example with : emacs -batch -l ~/.emacs : -eval '(let ((org-export-htmlize-generate-css (quote css))) : (org-batch-agenda "e"))' Then you can use a style file to make these classes look any way you like. To generate face definitions for a CSS file based on any faces you are currently using in Emacs, you can use the following command: : M-x org-export-htmlize-generate-css RET This will generate a == section, the content of which you can add to your style file. ** How can I avoid dark color background when exporting agenda to ps format? :PROPERTIES: :CUSTOM_ID: avoiding-dark-background-when-exporting-agenda :END: #+index: Export!.ps Add this to your .emacs and evaluate it. #+BEGIN_SRC emacs-lisp (setq org-agenda-exporter-settings '((ps-print-color-p 'black-white))) #+END_SRC ** How can I include e.g. an abstract in export to Latex and HTML? :PROPERTIES: :CUSTOM_ID: include-abstract-in-export-to-latex-and-html :END: #+index: Export!Abstract Org does not currently have special markup for abstracts, but for export purposes, you can extend the block-level structural and semantic markup in Org with the contributed package [[file:org-contrib/org-special-blocks.org][org-special-blocks]] (by Chris Gray). To turn it on, put this in your =.emacs=: : (require 'org-special-blocks) Now, you can mark up the abstract of your article like this: : #+BEGIN_ABSTRACT : Falling apples were observed and compared with pears. Newton's laws : were confirmed at the 95% confidence level. : #+END_ABSTRACT Exporting to Latex wraps this in a =\begin{abstract}....\end{abstract}= environment, which just works. HTML export wraps it in a ~ ... ~ element. The HTML result won't look like anything special until you style it. Here is some sample CSS to get you started; put these in your document header: : #+STYLE: Generally, =#+begin_foo= will work for any simple Latex =foo= environment not supported by existing Org markup. If you need to pass parameters, process the block content in some way, or support other exporters, you may want to consider whether you can customize it using Eric Schulte's [[file:org-contrib/org-exp-blocks.org][org-exp-blocks]] instead. ** How can I get colored source code when exporting to LaTeX? :PROPERTIES: :CUSTOM_ID: fontified_source_code_w_latex :END: #+index: Export!LaTeX As of Sun Aug 9 2009 the "current" version of Org-mode (see [[keeping-current-with-Org-mode-development]]) supports exporting source code to LaTeX using the listings package. To turn on listing export add the following to your Org-mode customization. #+begin_src emacs-lisp ;; requite org-latex so that the following variables are defined (require 'org-latex) ;; tell org to use listings (setq org-export-latex-listings t) ;; you must include the listings package (add-to-list 'org-export-latex-packages-alist '("" "listings")) ;; if you want colored source code then you need to include the color package (add-to-list 'org-export-latex-packages-alist '("" "color")) #+end_src The listings package will now be used to fontify source code in your LaTeX documents. By default listings will not color any of your source code. If you would like to set colors for keywords and comments in your latex documents you can do so using LaTeX directives like the following. #+begin_src latex \lstset{keywordstyle=\color{blue}, commentstyle=\color{red}, stringstyle=\color{green} } #+end_src of if you want to get even fancier with your colors you can try something like the following #+begin_src latex \definecolor{keywords}{RGB}{255,0,90} \definecolor{comments}{RGB}{60,179,113} \definecolor{fore}{RGB}{249,242,215} \definecolor{back}{RGB}{51,51,51} \lstset{ basicstyle=\color{fore}, keywordstyle=\color{keywords}, commentstyle=\color{comments}, backgroundcolor=\color{back} } #+end_src For more complex listings use cases consult the [[ftp://ftp.tex.ac.uk/tex-archive/macros/latex/contrib/listings/listings.pdf][listings manual]]. ** How can I export to Latex Beamer? :PROPERTIES: :CUSTOM_ID: beamer :END: #+index: Export!Beamer The latex [[http://latex-beamer.sourceforge.net/][Beamer Class]] is a useful class for generating slide shows. The following can be used to export Org-mode documents to LaTeX beamer. Add the following to your Emacs initialization file. #+begin_src emacs-lisp (unless (boundp 'org-export-latex-classes) (setq org-export-latex-classes nil)) (add-to-list 'org-export-latex-classes '("beamer" "\\documentclass[11pt]{beamer}\n\\usepackage[utf8]{inputenc}\n\\usepackage[T1]{fontenc}\n\\usepackage{hyperref}\n\\usepackage{verbatim}\n" ("\\section{%s}" . "\\section*{%s}") ("\\begin{frame}\\frametitle{%s}" "\\end{frame}" "\\begin{frame}\\frametitle{%s}" "\\end{frame}"))) #+end_src Then by placing : #+LaTeX_CLASS: beamer in the header of your Org-mode document it will automatically export to the Beamer document class on LaTeX export. With the above configuration top-level headers will be mapped to sections in the Beamer document, second-level headers will be mapped to frames, and lower level headlines will be mapped to itemize objects. This above is adapted from an [[http://article.gmane.org/gmane.emacs.orgmode/15077/match=beamer+dokos][email by Nick Dokos]], and an [[http://article.gmane.org/gmane.emacs.orgmode/17767/match=beamer+dokos][email by Thomas Dye]]. For a much more complex Beamer setup see the [[http://article.gmane.org/gmane.emacs.orgmode/17767/match=beamer+dokos][email by Thomas Dye]]. ** How can I use RefTeX in Org-mode files for LaTeX export and in Org-babel LaTeX code blocks? :PROPERTIES: :CUSTOM_ID: using-reftex-in-org-mode :END: #+index: RefTeX #+index: Babel #+index: Code blocks [[http://www.gnu.org/software/auctex/reftex.html][RefTeX]] is an indispensable tool for the author of LaTeX documents. It aids in creation of bibliographies, cross-references, indexes, and glossaries. RefTeX understands the structure of multi-file LaTeX documents and is able to collect from them information about the location(s) of external data stores used in creation of the final document. RefTeX was written by Carsten Dominik and is currently being maintained by the [[http://www.gnu.org/software/auctex/index.html][AucTeX]] project. *** Using RefTeX In Org-mode Files for LaTeX Export In Org-mode files for LaTeX export, the trick is to find a way to tell RefTeX the locations of external data stores. One way is to set the variable, =reftex-default-bibliography=. Add lines like these to .emacs: #+begin_src emacs-lisp (setq reftex-default-bibliography (quote ("default.bib" "other-default.bib"))) #+end_src In practice, this is a limited solution and the typical user will want to pass this information on a per-file basis. Two solutions to this problem were posted on a blog, [[http://www.mfasold.net/blog/2009/02/using-emacs-org-mode-to-draft-papers/][Mario's Braindump]]. The first solution, proposed by Mario, enables the RefTeX citation function in Org-mode. Add these lines to .emacs: #+begin_src emacs-lisp (defun org-mode-reftex-setup () (load-library "reftex") (and (buffer-file-name) (file-exists-p (buffer-file-name)) (reftex-parse-all)) (define-key org-mode-map (kbd "C-c )") 'reftex-citation)) (add-hook 'org-mode-hook 'org-mode-reftex-setup) #+end_src Then add the following lines anywhere in the Org-mode file (Org-mode will recognize them as LaTeX commands): #+begin_src org \bibliographystyle{plain} \bibliography{BIB-NAME} #+end_src With this setup, =C-c )= will invoke =reftex-citation= which will insert a reference in the usual way: #+begin_src org ,* test reftex ,This is a citation \cite{tierney90}. ,\bibliographystyle{plain} ,\bibliography{tsd} #+end_src This Org-mode file will export the following LaTeX output: #+begin_src latex :exports code % Created 2010-03-22 Mon 14:34 \documentclass[11pt,letter]{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage{hyperref} \title{test.org} \author{Tom Dye} \date{2010-03-22 Mon} \begin{document} \maketitle \setcounter{tocdepth}{3} \tableofcontents \vspace*{1cm} \section{test reftex} \label{sec-1} This is a citation \cite{tierney90}. \bibliographystyle{plain} \bibliography{tsd} \end{document} #+end_src A second solution, to activate the RefTeX minor mode on a per-file basis, was posted by Kevin Brubeck Unhammer in response to this idea. Add the following lines to .emacs: #+begin_src emacs-lisp (add-hook ‘org-mode-hook (lambda () (if (member “WRITE” org-todo-keywords-1) (org-mode-article-modes)))) #+end_src where =org-mode-article-modes= is defined as follows: #+begin_src emacs-lisp (defun org-mode-article-modes () (reftex-mode t) (bib-cite-minor-mode t) (and (buffer-file-name) (file-exists-p (buffer-file-name)) (reftex-parse-all))) #+end_src Add the =\bibliographystyle{}= and =\bibliography{}= lines to the Org-mode file as before and define a TODO keyword, =WRITE=, perhaps like this: #+begin_src org ,#+TODO: TODO(t) STARTED(s) WRITE | DONE(d) DEFERRED(f) #+end_src With this setup, you insert a citation with =M-x reftex-citation RET=. *** Using RefTeX in Org-babel LaTeX Code Blocks In Org-babel LaTeX code blocks, the trick is to give RefTeX access to information in other Org-babel LaTeX code blocks. If you use an Emacs starter kit where configuration information is held in Org-mode files, then the second solution is preferable because you won't be asked for a master file when Emacs is started. For this reason, the second solution is modified for use with Org-babel latex code blocks. No key-binding is needed here because Org-babel code blocks are edited within the usual AucTeX environment. Add the following lines to .emacs (adapted from Kevin Brubeck Unhammer's [[http://www.mfasold.net/blog/2009/02/using-emacs-org-mode-to-draft-papers/][Reftex Setup]]) #+begin_src emacs-lisp (defun org-mode-article-modes () (reftex-mode t) (and (buffer-file-name) (file-exists-p (buffer-file-name)) (reftex-parse-all))) (add-hook 'org-mode-hook (lambda () (if (member "REFTEX" org-todo-keywords-1) (org-mode-article-modes)))) #+end_src Then add a line like the following line to the top of your org-mode file: #+begin_src org ,#+TODO: TODO(t) STARTED(s) | DONE(d) DEFERRED(f) REFTEX #+end_src When you open an org-mode file with a line like this, RefTeX will prompt for the master .tex file, which will be parsed in the usual way. This means that the .tex file should already exist, perhaps by tangling the LaTeX preamble and postamble, before =org-mode-article-modes= is activated for the Org-mode file. ** How can I use XeLaTeX for LaTeX export instead of pdfLaTeX? :PROPERTIES: :CUSTOM_ID: using-xelatex-for-pdf-export :END: #+index: XeLaTeX #+index: pdfLaTeX [[http://en.wikipedia.org/wiki/XeTeX][XeLaTeX]] is an alternative to pdfLaTeX for typesetting LaTeX documents. XeTeX can use any fonts installed in the operating system without configuring TeX font metrics, and can make direct use of advanced typographic features of OpenType and other font formats. By default, org-mode exports =org= files to =pdf= via pdfLaTeX. Here is one way to smoothly incorporate XeLaTeX into org-mode's export process. This solution takes advantage of [[http://www.phys.psu.edu/~collins/software/latexmk-jcc][latexmk]], a perl script that intelligently and automatically manages latex compilation. It is included with TeXLive, but at present the version included is not quite up-to-date enough for our needs. Version 4.20 and higher includes an option allowing you to specify which program to use when "pdflatex" is called. Install a current version of latexmk as per the instructions on the [[http://www.phys.psu.edu/~collins/software/latexmk-jcc][latexmk]] site. If necessary, disable the older version that comes with TeXLive. This is likely in =/usr/texbin/=, and you should rename or remove it. Then you can put the following in your =~/.emacs.d/= or equivalent: #+begin_src emacs-lisp (require 'org-latex) (setq org-export-latex-listings t) ;; Originally taken from Bruno Tavernier: http://thread.gmane.org/gmane.emacs.orgmode/31150/focus=31432 ;; but adapted to use latexmk 4.20 or higher. (defun my-auto-tex-cmd () "When exporting from .org with latex, automatically run latex, pdflatex, or xelatex as appropriate, using latexmk." (let ((texcmd))) ;; default command: oldstyle latex via dvi (setq texcmd "latexmk -dvi -pdfps -quiet %f") ;; pdflatex -> .pdf (if (string-match "LATEX_CMD: pdflatex" (buffer-string)) (setq texcmd "latexmk -pdf -quiet %f")) ;; xelatex -> .pdf (if (string-match "LATEX_CMD: xelatex" (buffer-string)) (setq texcmd "latexmk -pdflatex=xelatex -pdf -quiet %f")) ;; LaTeX compilation command (setq org-latex-to-pdf-process (list texcmd))) (add-hook 'org-export-latex-after-initial-vars-hook 'my-auto-tex-cmd) ;; Specify default packages to be included in every tex file, whether pdflatex or xelatex (setq org-export-latex-packages-alist '(("" "graphicx" t) ("" "longtable" nil) ("" "float" nil))) (defun my-auto-tex-parameters () "Automatically select the tex packages to include." ;; default packages for ordinary latex or pdflatex export (setq org-export-latex-default-packages-alist '(("AUTO" "inputenc" t) ("T1" "fontenc" t) ("" "fixltx2e" nil) ("" "wrapfig" nil) ("" "soul" t) ("" "textcomp" t) ("" "marvosym" t) ("" "wasysym" t) ("" "latexsym" t) ("" "amssymb" t) ("" "hyperref" nil))) ;; Packages to include when xelatex is used (if (string-match "LATEX_CMD: xelatex" (buffer-string)) (setq org-export-latex-default-packages-alist '(("" "fontspec" t) ("" "xunicode" t) ("" "url" t) ("" "rotating" t) ("american" "babel" t) ("babel" "csquotes" t) ("" "soul" t) ("xetex" "hyperref" nil) ))) (if (string-match "LATEX_CMD: xelatex" (buffer-string)) (setq org-export-latex-classes (cons '("article" "\\documentclass[11pt,article,oneside]{memoir}" ("\\section{%s}" . "\\section*{%s}") ("\\subsection{%s}" . "\\subsection*{%s}") ("\\subsubsection{%s}" . "\\subsubsection*{%s}") ("\\paragraph{%s}" . "\\paragraph*{%s}") ("\\subparagraph{%s}" . "\\subparagraph*{%s}")) org-export-latex-classes)))) (add-hook 'org-export-latex-after-initial-vars-hook 'my-auto-tex-parameters) #+end_src The =my-auto-tex-cmd= function looks at your =.org= file and checks whether you've specified which latex to use. If there are no instructions, it just runs regular old latex. If it finds the string =LATEX_CMD: pdflatex= in your file, it runs pdflatex. If it finds =LATEX_CMD: xelatex=, it runs xelatex. Because control is handed off to latexmk, nothing else is needed: it takes care of figuring things out so that the references and citations are correct. The second half of the code above specifies the latex packages that will be included in the =.tex= file. The variable =org-export-latex-packages-alist= specifies a list of packages that are always included in the header of latex documents, regardless of how they are compiled. The variable =org-export-latex-default-packages-alist= adds additional packages depending on whether latex/pdflatex or xelatex is being used. You can change the content of these as needed. Finally, the =org-export-latex-classes= variable redefines elements of the =.tex= file's preamble for the xelatex case. These can also be customized as needed. By way of example, an =.org= file you want compiled with xelatex might contain the following header: : #+TITLE: My Paper : #+AUTHOR: Jane Doe : #+DATE: : #+OPTIONS: toc:nil num:nil : #+LATEX_CMD: xelatex : #+LATEX_HEADER: \setsansfont[Mapping=tex-text]{Unit-Bold} : #+LATEX_HEADER: \setmonofont[Mapping=tex-text,Scale=MatchLowercase]{PragmataPro} : #+LATEX_HEADER: \setromanfont[Mapping=tex-text,Numbers=OldStyle]{Minion Pro} If you always want to have the same font setup in your xelatex documents, the =fontspec= commands setting the font choices can be put in the =org-export-latex-classes= setting instead. The upshot is that when you want to export an =.org= file using XeLaTeX, you can now simply make sure the line =LATEX_CMD: xelatex= is in your =.org= file, then do =C-c C-e d= as usual, and org-mode, with latexmk in the background, does the rest for you. ** Why is my exported PDF file almost unreadable? :PROPERTIES: :CUSTOM_ID: unreadable-pdfs :END: Some PDF viewers (earlier versions (< v6) of Acrobat Reader, Evince, possibly others) do not get along with Adobe Type3 fonts, producing almost unreadable screen output (printed output is OK). If you see this, first verify the fonts that your document uses: open it with Acrobat Reader or Evince, select "Properties" from the "File" menu and click on the "Fonts" tab; alternatively, you can use the pdffonts program (part of the xpdf-reader package) from the command line. If that is indeed the problem, then either use a different viewer or install Type1 versions of the problematic fonts. For more details, see the "PDF export" section of [[./org-dependencies.org][org-dependencies]]. ** Can I add attributes to a link or an image in HTML export? :PROPERTIES: :CUSTOM_ID: html-image-and-link-attributes :END: #+index: Export!Link #+index: Export!Image #+index: Link!Attributes #+index: Image!Attributes Yes. Excerpt from [[http://orgmode.org/manual/Images-in-HTML-export.html#Images-in-HTML-export][Org's manual]]: If you need to add attributes to an inlined image, use a #+ATTR_HTML'. In the example below we specify the alt' and title' attributes to support text viewers and accessibility, and align it to the right. : #+CAPTION: A black cat stalking a spider : #+ATTR_HTML: alt="cat/spider image" title="Action!" align="right" : [[./img/a.jpg]] and you could use http' addresses just as well. ** How can I export an org file to rtf, odt (Open Office), or doc (Word)? :PROPERTIES: :CUSTOM_ID: convert-to-open-office :END: #+index: Export!rtf #+index: Export!odt #+index: Export!doc Orgmode exports natively to =OpenDocument= format using =org-odt= module. The key bindings for export are =C-c C-e o= and =C-c C-e O=. If you don't see =OpenDocumentText= as an option under =C-c C-e= you need to upgrade to =Org-mode 7.6= by one of the following means: 1. Install org-7.6 using a distribution .zip or .tar.gz file, or through Git. Then do the following: 1. Add =contrib/lisp= to the load-path in your =.emacs= #+begin_src emacs-lisp ;; modify org-root-dir as needed (add-to-list 'load-path "org-root-dir/contrib/lisp") #+end_src 2. Do =M-x customize-variable RET org-modules RET= and enable the =odt= option 2. Upgrade to (atleast) the =Emacs-24.1 pretest= version. Install =org-odt= package using =M-x list-packages=. #+begin_comment - Use existing exporters Export to one of org-mode's supported export formats and then use an external tool or method to convert the exported file to doc or odt. With simple documents, these methods work well. However for complex documents containing footnotes, embedded images, math formuale etc the results may be less than satisfactory. (Note, the lists below are by no means comprehensive). 1. html -> odt/doc/rtf - open html in Open Office and save as odt/doc ([[http://permalink.gmane.org/gmane.emacs.orgmode/31482][see this post by Eric Fraga]]) - [[http://www.artofsolving.com/opensource/pyodconverter][PyODConverter]] - [[http://johnmacfarlane.net/pandoc/][Pandoc]] (this works for LaTeX and docbook as well) - (Mac only) The [[http://developer.apple.com/library/mac/#DOCUMENTATION/Darwin/Reference/ManPages/man1/textutil.1.html][textutil]] utility bundled with OS X can convert from html to doc 2. LaTeX -> odt/doc/rtf - [[http://latex2rtf.sourceforge.net/][LaTeX2rtf]] (works well with index, footnotes, and references) - [[http://www.tug.org/tex4ht/][TeX4ht]] (works with more complex latex elements, though can be difficult to install) - run =mk4ht oolatex file.tex= See [[http://permalink.gmane.org/gmane.emacs.orgmode/31168][this thread]] for further details. #+end_comment ** ODT export aborts on my Windows machine as I don't have zip installed. Where can I find a zip utility? #+index: Zip You can either use [[http://en.wikipedia.org/wiki/Info-ZIP][Info-ZIP]] or zip package from Cygwin. Please customize =exec-path= to include the installation directory. ** I cannot open an exported =*.odt= file in LibreOffice because it is corrupt. What do I do? :PROPERTIES: :CUSTOM_ID: debugging-org-odt :END: #+index: Export!odt Typically the corruption of =odt= file happens when the XML emitted by Org is not well-formed according to =OpenDocument schema=. If you encounter corruption issues please identify the root cause using one of the methods described below: - Use an Online validator - Pass the exported document through the [[http://tools.services.openoffice.org/odfvalidator/][ODF Validator]] and note down the errors. - Use Emacs' in-built validator 1. Switch to =*.odt= buffer =(C-x b whatever.odt)= 2. Open the =content.xml= file - =(Hit RET on content.xml)= 3. Do a =C-u C-c C-n= - =(M-x rng-first-error)= 4. Note the error message, the XML markup at the point of error and the surrounding context. Once you have identified the error 1. Create a minimal org file that reproduces the error. 2. Post a bug-report to =emacs-orgmode@gnu.org=. ** How can I specify ODT export styles? #+index: Export!odt style Check the variable =org-export-odt-styles-file=. Here is its docstring, as of Org version 7.8: : org-export-odt-styles-file is a variable defined in org-odt.el'. : Its value is nil : : Documentation: : Default styles file for use with ODT export. : Valid values are one of: : 1. nil : 2. path to a styles.xml file : 3. path to a *.odt or a *.ott file : 4. list of the form (ODT-OR-OTT-FILE (FILE-MEMBER-1 FILE-MEMBER-2 : ...)) : : [snip] : : Use "#+ODT_STYLES_FILE: ..." directive to set this variable on : a per-file basis. For example, : : #+ODT_STYLES_FILE: "/path/to/styles.xml" or : #+ODT_STYLES_FILE: ("/path/to/file.ott" ("styles.xml" "image/hdr.png")). : : You can customize this variable. * Backup #+index: Backup Since =org= files are so central to your life, you probably want to back them up in a safe place. If the =org= file you want to back up are in a single directory, the preferred method is to us a =RCS= (Revision Control System) -- pick up your favorite ([[http://git-scm.com/][git]], [[http://bazaar.canonical.com/en/][bazaar]], [[http://mercurial.selenic.com/][mercurial]], [[http://subversion.apache.org/][subversion]], [[http://www.nongnu.org/cvs/][cvs]], etc.). Depending on the RCS you use and how you use it, you can have a /local/ backup or sync it on a remote place. If you want to store all your =org= files from your =HOME= to a single =~/org/backup/= folder, you can use this shell script (as [[http://article.gmane.org/gmane.emacs.orgmode/37655][suggested by Suvayu Ali]]): #+begin_src sh mkdir -p ~/org/backup && \ find $HOME -type f -name '*\.org' ! -path "$HOME/org/backup/*" \ -exec cp -t ~/org/backup/ \{\} \; #+end_src It will recursively search for =org= files in your =\$HOME= directory (except those in =~/org/backup/=) and copy them to =~/org/backup/=. You can then use rsync to make sure =~/org/backup/= also lives on a remote and safe place. * MobileOrg #+index: MobileOrg ** Which versions of MobileOrg do exist? :PROPERTIES: :CUSTOM_ID: mobileorg_versions :END: - MobileOrg for the iPhone/iPod Touch/iPad series of devices, by Richard Moreland. Check out [[http://mobileorg.ncogni.to/][Richard's page]] - Matt Jones is developing a feature-equivalent application for Android, see [[http://wiki.github.com/matburt/mobileorg-android/][his project page]]. ** What can I do if I don't want to use Dropbox.com? :PROPERTIES: :CUSTOM_ID: mobileorg_webdav :END: Dropbox.com is the easiest way to connect between Emacs and MobileOrg, you can get a free account there. If for some reason you cannot or do not want to use this path, you can use any webdav server. On this webdav server you need to create a dedicated directory for the communication between Emacs and MobileOrg. If you can mount that directory locally so that Emacs can directly write to it, just point to that directory using the variable =org-mobile-directory=. Using the /tramp/ method, =org-mobile-directory= may point to a remote directory accessible through, for example, /ssh/ and /scp/: #+begin_src emacs-lisp (setq org-mobile-directory "/scpc:user@@remote.host:org/webdav/") #+end_src If Emacs cannot access the WebDAV directory directly using a /tramp/ method, you can use a local directory for staging. Other means must then be used to keep this directory in sync with the WebDAV directory. In the following example, files are staged in =~/stage/=, and Org-mode hooks take care of moving files to and from the WebDAV directory using /scp/. #+begin_src emacs-lisp (setq org-mobile-directory "~/stage/") (add-hook 'org-mobile-post-push-hook (lambda () (shell-command "scp -r ~/stage/* user@@wdhost:mobile/"))) (add-hook 'org-mobile-pre-pull-hook (lambda () (shell-command "scp user@@wdhost:mobile/mobileorg.org ~/stage/ "))) (add-hook 'org-mobile-post-pull-hook (lambda () (shell-command "scp ~/stage/mobileorg.org user@@wdhost:mobile/"))) #+end_src * Mathjax #+index: Mathjax ** How to install MathJax on my server? :PROPERTIES: :CUSTOM_ID: install_mathjax_on_server :END: Org uses MathJax as its default HTML display engine for equations. Org relies on the version of MathJax available from orgmode.org, but you might want to use another version and install MathJax on your own server. 1. Download a [[http://sourceforge.net/projects/mathjax/files/][MathJax archive]]. 2. Upload it somewhere on your server (say http://me.org/mathjax/) 3. Set the correct path in =org-export-html-mathjax-options= (i.e. replace http://orgmode.org/mathjax/MathJax.js by http://me.org/mathjax/MathJax.js) You can also get [[http://www.mathjax.org/resources/docs/?installation.html][MathJax from git or svn]] -- in this case, be careful not to forget to unzip the fonts.zip archive in the mathjax directory. * Tips and Tricks ** Can I create an Org link from a gmail email? #+index: Link!Gmail Yes. See [[http://comments.gmane.org/gmane.emacs.orgmode/48056][this email]] from Torsten Wagner. Also check this comment by Tom: : Since any mail can be found under the All label by definition the : simplest solution is extracting the message id from the end of : the current url and then creating a new url pointing to All. : This URL should always work unless the mail is deleted: : : https://mail.google.com/mail/?shva=1#all/ ** Problems with LaTeX macros with #+latex or #+begin_latex :PROPERTIES: :CUSTOM_ID: Problems-with-LaTeX-macros-with-#+latex-or-#+begin_latex :END: #+index: LaTeX!Macro Org's LaTeX exporter has a difficult job on its hands and even though it does a great job most of the time, there are times when it falls short. One situation that has arisen a few times in the past is when a macro definition or use includes an opening brace, but the corresponding closing brace is on a different line. That has caused LaTeX compilation problems or mysterious excisions of content - see for example the following two threads in the mailing list: - http://thread.gmane.org/gmane.emacs.orgmode/39308 - http://thread.gmane.org/gmane.emacs.orgmode/42196 In both cases, the exporter was getting confused by the opening brace which did not have a corresponding closing brace on the same line. Although the first of these cases is fixed in current Org, there might be more such cases or there might be a regression which causes the incorrect behavior again. While waiting for a fix, it's worth trying out the simple workaround of including a fake closing brace on the same line as the opening brace but *commenting it out* so that LaTeX never sees it. That is often enough to make the exporter behave properly. In other words, to take one of the examples above, instead of writing : #+latex: \custommacro { : ... : #+latex: } use the following idiom instead: : #+latex: \custommacro { % hide the closing brace in a LaTeX comment } : ... : #+latex: } I emphasize that this is a workaround, not a fix: if you do run into such a case and the workaround fixes it, at least you can continue working, but please submit a bug report so that it can be fixed properly. ** Inserting a Mairix type link when calling Orgmode capture in VM #+index: lMairix See the "rather crude solution" posted in [[http://robert-adesam.blogspot.com/2011/07/orgmode-capture-to-insert-mairix-link.html][this blog entry]] by Robert Adesam. * COMMENT Function to create =CUSTOM_ID= #+begin_src emacs-lisp (defun org-faq-make-target () "Make hard target for current headline." (interactive) (if (not (org-on-heading-p)) (error "Not on a headline")) (let ((h (org-trim (org-get-heading 'no-tags)))) (if (string-match "[ \t]*\\?\\'" h) (setq h (replace-match "" t t h))) (while (string-match "[ \t]+" h) (setq h (replace-match "-" t t h))) (org-entry-put nil "CUSTOM_ID" h))) #+end_src