doc.org 1.1 MB

Definitions

This page lists all hooks, commands and options of Org 8.1.

Hooks
are options containing functions to be run before or after a
function. For example, =org-mode-hook= can contain a list of functions to be called after org-mode is turned on.
Commands
are interactive functions that the user can run with =M-x
command RET=. Most commands have an associated keybinding, indicated here. Users can bind command to his preferred keybinding.
Options
are variables that the user can set through the customize
interface. Calling =M-x customize-variable RET= then completing over availables options will open the custom interface, which makes it easy to set an option.

These are the main "internals" that the uesr may want to know about, and we list them here for further reference. E.g. You can safely create links to =http://orgmode.org/worg/doc.html#org-agenda= to refer to the documentation of the org-agenda command.

On top of these symbols, there are other non-interactive functions and /variables/. You can get more documentation about them with C-h f org- TAB and C-h v org- TAB respectively.

Hooks

:PROPERTIES: :CUSTOM_ID: hooks :END:

org-shiftmetaup-hook nil

Hook for functions attaching themselves to `M-S-up'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-filter-subscript-functions nil

List of functions applied to a transcoded subscript.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-feed-after-adding-hook nil

Hook that is run after new items have been added to a file.

Depending on `org-feed-save-after-adding', the buffer will already have been saved.

org-export-filter-drawer-functions nil

List of functions applied to a transcoded drawer.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-indent-mode-hook nil

Hook run after entering or leaving `org-indent-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-filter-node-property-functions nil

List of functions applied to a transcoded node-property.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-ctrl-c-ctrl-c-hook nil

Hook for functions attaching themselves to `C-c C-c'.

This can be used to add additional functionality to the C-c C-c key which executes context-dependent commands. This hook is run before any other test, while `org-ctrl-c-ctrl-c-final-hook' is run after the last test. Each function will be called with no arguments. The function must check if the context is appropriate for it to act. If yes, it should do its thing and then return a non-nil value. If the context is wrong, just do nothing and return nil.

List of functions applied to a transcoded link.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-capture-after-finalize-hook nil

Hook that is run right after a capture process is finalized.

Suitable for window cleanup.

org-export-filter-bold-functions nil

List of functions applied to transcoded bold text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-define-heading-targets-headline-hook nil

org-mobile-before-process-capture-hook nil

Hook that is run after content was moved to `org-mobile-inbox-for-pull'.

The inbox file is visited by the current buffer, and the buffer is narrowed to the newly captured data.

org-create-file-search-functions nil

List of functions to construct the right search string for a file link.

These functions are called in turn with point at the location to which the link should point. A function in the hook should first test if it would like to handle this file type, for example by checking the `major-mode' or the file extension. If it decides not to handle this file, it should just return nil to give other functions a chance. If it does handle the file, it must return the search string to be used when following the link. The search string will be part of the file link, given after a double colon, and `org-open-at-point' will automatically search for it. If special measures must be taken to make the search successful, another function should be added to the companion hook `org-execute-file-search-functions', which see. A function in this hook may also use `setq' to set the variable `description' to provide a suggestion for the descriptive text to be used for this link when it gets inserted into an Org-mode buffer with \[org-insert-link].

org-export-preprocess-before-backend-specifics-hook nil

org-tab-after-check-for-table-hook nil

Hook for functions to attach themselves to TAB.

See `org-ctrl-c-ctrl-c-hook' for more information. This hook runs after it has been established that the cursor is not in a table, but before checking if the cursor is in a headline or if global cycling should be done. If any function in this hook returns t, not other actions like visibility cycling will be done.

org-clock-goto-hook nil

Hook run when selecting the currently clocked-in entry.

org-export-filter-section-functions nil

List of functions applied to a transcoded section.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-shiftleft-hook nil

Hook for functions attaching themselves to `S-left'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-filter-latex-environment-functions nil

List of functions applied to a transcoded latex-environment.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-ctrl-c-ctrl-c-final-hook nil

Hook for functions attaching themselves to `C-c C-c'.

This can be used to add additional functionality to the C-c C-c key which executes context-dependent commands. This hook is run after any other test, while `org-ctrl-c-ctrl-c-hook' is run before the first test. Each function will be called with no arguments. The function must check if the context is appropriate for it to act. If yes, it should do its thing and then return a non-nil value. If the context is wrong, just do nothing and return nil.

org-export-filter-footnote-reference-functions nil

List of functions applied to a transcoded footnote-reference.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-export-snippet-functions nil

List of functions applied to a transcoded export-snippet.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-strike-through-functions nil

List of functions applied to transcoded strike-through text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-keyword-functions nil

List of functions applied to a transcoded keyword.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-agenda-cleanup-fancy-diary-hook nil

Hook run when the fancy diary buffer is cleaned up.

org-export-filter-radio-target-functions nil

List of functions applied to a transcoded radio-target.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-quote-section-functions nil

List of functions applied to a transcoded quote-section.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-preprocess-after-radio-targets-hook nil

org-export-preprocess-before-selecting-backend-code-hook nil

orgtbl-after-send-table-hook nil

Hook for functions attaching to `C-c C-c', if the table is sent.

This can be used to add additional functionality after the table is sent to the receiver position, otherwise, if table is not sent, the functions are not run.

org-export-filter-diary-sexp-functions nil

List of functions applied to a transcoded diary-sexp.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-log-buffer-setup-hook nil

Hook that is run after an Org log buffer is created.

org-tab-first-hook nil

Hook for functions to attach themselves to TAB.

See `org-ctrl-c-ctrl-c-hook' for more information. This hook runs as the first action when TAB is pressed, even before `org-cycle' messes around with the `outline-regexp' to cater for inline tasks and plain list item folding. If any function in this hook returns t, any other actions that would have been caused by TAB (such as table field motion or visibility cycling) will not occur.

org-capture-prepare-finalize-hook nil

Hook that is run before the finalization starts.

The capture buffer is current and still narrowed.

org-mobile-post-push-hook nil

Hook run after running `org-mobile-push'.

If Emacs does not have direct write access to the WebDAV directory used by the mobile device, this hook should be used to copy all files from the local staging directory `org-mobile-directory' to the WebDAV directory, for example using `rsync' or `scp'.

org-export-filter-plain-list-functions nil

List of functions applied to a transcoded plain-list.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-target-functions nil

List of functions applied to a transcoded target.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-item-functions nil

List of functions applied to a transcoded item.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-line-break-functions nil

List of functions applied to a transcoded line-break.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-mobile-pre-push-hook nil

Hook run before running `org-mobile-push'.

This could be used to clean up `org-mobile-directory', for example to remove files that used to be included in the agenda but no longer are. The presence of such files would not really be a problem, but after time they may accumulate.

org-open-at-point-functions nil

Hook that is run when following a link at point.

Functions in this hook must return t if they identify and follow a link at point. If they don't find anything interesting at point, they must return nil.

org-execute-file-search-functions nil

List of functions to execute a file search triggered by a link.

Functions added to this hook must accept a single argument, the search string that was part of the file link, the part after the double colon. The function must first check if it would like to handle this search, for example by checking the `major-mode' or the file extension. If it decides not to handle this search, it should just return nil to give other functions a chance. If it does handle the search, it must return a non-nil value to keep other functions from trying. Each function can access the current prefix argument through the variable `current-prefix-arg'. Note that a single prefix is used to force opening a link in Emacs, so it may be good to only use a numeric or double prefix to guide the search function. In case this is needed, a function in this hook can also restore the window configuration before `org-open-at-point' was called using: (set-window-configuration org-window-config-before-follow-link)

org-timer-pause-hook nil

Hook run before relative timer is paused.

org-cycle-hook (quote (org-cycle-hide-archive...

Hook that is run after `org-cycle' has changed the buffer visibility.

The function(s) in this hook must accept a single argument which indicates the new state that was set by the most recent `org-cycle' command. The argument is a symbol. After a global state change, it can have the values `overview', `contents', or `all'. After a local state change, it can have the values `folded', `children', or `subtree'.

org-agenda-before-write-hook (quote (org-agenda-add-entry-t...

Hook run in a temporary buffer before writing the agenda to an export file.

A useful function for this hook is `org-agenda-add-entry-text'.

org-export-filter-src-block-functions nil

List of functions applied to a transcoded src-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-fixed-width-functions nil

List of functions applied to a transcoded fixed-width.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-read-date-minibuffer-setup-hook nil

Hook to be used to set up keys for the date/time interface.

Add key definitions to `minibuffer-local-map', which will be a temporary copy. WARNING: This option is obsolete, you should use `org-read-date-minibuffer-local-map' to set up keys.

org-speed-command-hook (quote (org-speed-command-defa...

Hook for activating speed commands at strategic locations.

Hook functions are called in sequence until a valid handler is found. Each hook takes a single argument, a user-pressed command key which is also a `self-insert-command' from the global map. Within the hook, examine the cursor position and the command key and return nil or a valid handler as appropriate. Handler could be one of an interactive command, a function, or a form. Set `org-use-speed-commands' to non-nil value to enable this hook. The default setting is `org-speed-command-activate'.

org-export-preprocess-hook nil

org-tab-before-tab-emulation-hook nil

Hook for functions to attach themselves to TAB.

See `org-ctrl-c-ctrl-c-hook' for more information. This hook runs after every other options for TAB have been exhausted, but before indentation and insertion takes place.

org-export-filter-special-block-functions nil

List of functions applied to a transcoded special block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-parse-tree-functions nil

List of functions applied to the parsed tree.

Each filter is called with three arguments: the parse tree, as returned by `org-element-parse-buffer', the back-end, as a symbol, and the communication channel, as a plist. It must return the modified parse tree to transcode.

org-export-filter-export-block-functions nil

List of functions applied to a transcoded export-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-capture-before-finalize-hook nil

Hook that is run right before a capture process is finalized.

The capture buffer is still current when this hook runs and it is widened to the entire buffer.

org-blocker-hook nil

Hook for functions that are allowed to block a state change.

Functions in this hook should not modify the buffer. Each function gets as its single argument a property list, see `org-trigger-hook' for more information about this list. If any of the functions in this hook returns nil, the state change is blocked.

org-checkbox-statistics-hook nil

Hook that is run whenever Org thinks checkbox statistics should be updated.

This hook runs even if checkbox rule in `org-list-automatic-rules' does not apply, so it can be used to implement alternative ways of collecting statistics information.

org-metaright-hook nil

Hook for functions attaching themselves to `M-right'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-babel-pre-tangle-hook (quote (save-buffer))

Hook run at the beginning of `org-babel-tangle'.

org-occur-hook (quote (org-first-headline-rec...

Hook that is run after `org-occur' has constructed a sparse tree.

This can be used to recenter the window to show as much of the structure as possible.

org-font-lock-hook nil

Functions to be called for special font lock stuff.

org-export-filter-table-row-functions nil

List of functions applied to a transcoded table-row.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

orgstruct-setup-hook nil

Hook run after orgstruct-mode-map is filled.

org-metaleft-hook nil

Hook for functions attaching themselves to `M-left'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-timer-set-hook nil

Hook run after countdown timer is set.

org-mobile-post-pull-hook nil

Hook run after running `org-mobile-pull', only if new items were found.

If Emacs does not have direct write access to the WebDAV directory used by the mobile device, this hook should be used to copy the emptied capture file `mobileorg.org' back to the WebDAV directory, for example using `rsync' or `scp'.

org-after-tags-change-hook nil

Hook that is run after the tags in a line have changed.

org-trigger-hook nil

Hook for functions that are triggered by a state change.

Each function gets as its single argument a property list with at least the following elements: (:type type-of-change :position pos-at-entry-start :from old-state :to new-state) Depending on the type, more properties may be present. This mechanism is currently implemented for: TODO state changes ------------------ :type todo-state-change :from previous state (keyword as a string), or nil, or a symbol 'todo' or 'done', to indicate the general type of state. :to new state, like in :from

org-shiftright-hook nil

Hook for functions attaching themselves to `S-right'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-mobile-pre-pull-hook nil

Hook run before executing `org-mobile-pull'.

If Emacs does not have direct write access to the WebDAV directory used by the mobile device, this hook should be used to copy the capture file `mobileorg.org' from the WebDAV location to the local staging directory `org-mobile-directory'.

org-after-promote-entry-hook nil

Hook run after an entry has been promoted.

The cursor will be at the beginning of the entry. When a subtree is being promoted, the hook will be called for each node.

Hook for functions finding a plain text link.

These functions must take a single argument, the link content. They will be called for links that look like [[link text][description]] when LINK TEXT does not have a protocol like "http:" and does not look like a filename (e.g. "./blue.png"). These functions will be called *before* Org attempts to resolve the link by doing text searches in the current buffer - so if you want a link "[[target]]" to still find "<>", your function should handle this as a special case. When the function does handle the link, it must return a non-nil value. If it decides that it is not responsible for this link, it must return nil to indicate that that Org-mode can continue with other options like exact and fuzzy text search.

org-export-preprocess-after-include-files-hook nil

org-insert-heading-hook nil

Hook being run after inserting a new heading.

org-property-allowed-value-functions nil

Hook for functions supplying allowed values for a specific property.

The functions must take a single argument, the name of the property, and return a flat list of allowed values. If ":ETC" is one of the values, this means that these values are intended as defaults for completion, but that other values should be allowed too. The functions must return nil if they are not responsible for this property.

org-timer-continue-hook nil

Hook run after relative timer is continued.

org-after-demote-entry-hook nil

Hook run after an entry has been demoted.

The cursor will be at the beginning of the entry. When a subtree is being demoted, the hook will be called for each node.

org-shiftdown-final-hook nil

Hook for functions attaching themselves to `S-down'.

This one runs after all other options except shift-select have been excluded. See `org-ctrl-c-ctrl-c-hook' for more information.

org-feed-before-adding-hook nil

Hook that is run before adding new feed items to a file.

You might want to commit the file in its current state to version control, for example.

org-todo-statistics-hook nil

Hook that is run whenever Org thinks TODO statistics should be updated.

This hook runs even if there is no statistics cookie present, in which case `org-after-todo-statistics-hook' would not run.

org-metaup-hook nil

Hook for functions attaching themselves to `M-up'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-reveal-start-hook nil

Hook run before revealing a location.

org-cdlatex-mode-hook nil

Hook run after entering or leaving `org-cdlatex-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-shiftmetadown-hook nil

Hook for functions attaching themselves to `M-S-down'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-stack-mode-hook nil

Hook run after entering Org-Stack mode.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-filter-inlinetask-functions nil

List of functions applied to a transcoded inlinetask.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-beamer-mode-hook nil

Hook run after entering or leaving `org-beamer-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-filter-paragraph-functions nil

List of functions applied to a transcoded paragraph.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-example-block-functions nil

List of functions applied to a transcoded example-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-preprocess-after-blockquote-hook nil

org-export-filter-code-functions nil

List of functions applied to transcoded code text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-babel-after-execute-hook nil

Hook for functions to be called after `org-babel-execute-src-block'

org-babel-post-tangle-hook nil

Hook run in code files tangled by `org-babel-tangle'.

org-agenda-after-show-hook nil

Normal hook run after an item has been shown from the agenda.

Point is in the buffer where the item originated.

org-clock-in-hook nil

Hook run when starting the clock.

org-export-preprocess-after-headline-targets-hook nil

org-clock-cancel-hook nil

Hook run when cancelling the current clock.

org-export-filter-superscript-functions nil

List of functions applied to a transcoded superscript.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-load-hook nil

Hook that is run after org.el has been loaded.

org-agenda-entry-text-cleanup-hook nil

Hook that is run after basic cleanup of entry text to be shown in agenda.

This cleanup is done in a temporary buffer, so the function may inspect and change the entire buffer. Some default stuff like drawers and scheduling/deadline dates will already have been removed when this is called, as will any matches for regular expressions listed in `org-agenda-entry-text-exclude-regexps'.

org-export-filter-entity-functions nil

List of functions applied to a transcoded entity.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-property-changed-functions nil

Hook called when the value of a property has changed.

Each hook function should accept two arguments, the name of the property and the new value.

org-export-filter-center-block-functions nil

List of functions applied to a transcoded center block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-verbatim-functions nil

List of functions applied to transcoded verbatim text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-html-final-hook nil

org-export-filter-options-functions nil

List of functions applied to the export options.

Each filter is called with two arguments: the export options, as a plist, and the back-end, as a symbol. It must return a property list containing export options.

org-babel-tangle-body-hook nil

Hook run over the contents of each code block body.

org-clock-out-hook nil

Hook run when stopping the current clock.

org-export-preprocess-after-tree-selection-hook nil

org-timer-start-hook nil

Hook run after relative timer is started.

org-after-refile-insert-hook nil

Hook run after `org-refile' has inserted its stuff at the new location.

Note that this is still *before* the stuff will be removed from the *old* location.

orgstruct-mode-hook nil

Hook run after entering or leaving `orgstruct-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-before-parsing-hook nil

Hook run before parsing an export buffer.

This is run after include keywords and macros have been expanded and Babel code blocks executed, on a copy of the original buffer being exported. Visibility and narrowing are preserved. Point is at the beginning of the buffer. Every function in this hook will be called with one argument: the back-end currently used, as a symbol.

org-export-filter-horizontal-rule-functions nil

List of functions applied to a transcoded horizontal-rule.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-inline-src-block-functions nil

List of functions applied to a transcoded inline-src-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-first-hook nil

org-mode-hook nil

Hook run after entering Org mode.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-shiftup-hook nil

Hook for functions attaching themselves to `S-up'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-filter-underline-functions nil

List of functions applied to transcoded underline text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-shiftup-final-hook nil

Hook for functions attaching themselves to `S-up'.

This one runs after all other options except shift-select have been excluded. See `org-ctrl-c-ctrl-c-hook' for more information.

org-timer-done-hook nil

Hook run after countdown timer reaches zero.

org-export-filter-inline-babel-call-functions nil

List of functions applied to a transcoded inline-babel-call.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-shiftmetaleft-hook nil

Hook for functions attaching themselves to `M-S-left'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-filter-comment-block-functions nil

List of functions applied to a transcoded comment-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-agenda-mode-hook nil

Hook run after `org-agenda-mode' is turned on.

The buffer is still writable when this hook is called.

org-export-filter-headline-functions nil

List of functions applied to a transcoded headline.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-timestamp-functions nil

List of functions applied to a transcoded timestamp.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-clock-before-select-task-hook nil

Hook called in task selection just before prompting the user.

org-icalendar-after-save-hook nil

Hook run after an iCalendar file has been saved.

This hook is run with the name of the file as argument. A good way to use this is to tell a desktop calendar application to re-read the iCalendar file.

org-export-filter-table-functions nil

List of functions applied to a transcoded table.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-timer-stop-hook nil

Hook run before relative timer is stopped.

org-finalize-agenda-hook nil

Hook that is run after a link has been followed.

org-font-lock-set-keywords-hook nil

Functions that can manipulate `org-font-lock-extra-keywords'.

This is called after `org-font-lock-extra-keywords' is defined, but before it is installed to be used by font lock. This can be useful if something needs to be inserted at a specific position in the font-lock sequence.

org-timer-cancel-hook nil

Hook run before countdown timer is canceled.

org-export-taskjuggler-final-hook nil

org-shiftleft-final-hook nil

Hook for functions attaching themselves to `S-left'.

This one runs after all other options except shift-select have been excluded. See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-before-processing-hook nil

Hook run at the beginning of the export process.

This is run before include keywords and macros are expanded and Babel code blocks executed, on a copy of the original buffer being exported. Visibility and narrowing are preserved. Point is at the beginning of the buffer. Every function in this hook will be called with one argument: the back-end currently used, as a symbol.

org-export-filter-verse-block-functions nil

List of functions applied to a transcoded verse block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-final-output-functions nil

List of functions applied to the transcoded string.

Each filter is called with three arguments: the full transcoded string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string that will be used as the final export output.

org-table-follow-field-mode-hook nil

Hook run after entering or leaving `org-table-follow-field-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-filter-latex-fragment-functions nil

List of functions applied to a transcoded latex-fragment.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-quote-block-functions nil

List of functions applied to a transcoded quote block.

Each filter is called with three arguments: the transcoded quote data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-todo-get-default-hook nil

Hook for functions that get a default item for todo.

Each function takes arguments (NEW-MARK OLD-MARK) and returns either nil or a string to be used for the todo mark.

org-pre-cycle-hook nil

Hook that is run before visibility cycling is happening.

The function(s) in this hook must accept a single argument which indicates the new state that will be set right after running this hook. The argument is a symbol. Before a global state change, it can have the values `overview', `content', or `all'. Before a local state change, it can have the values `folded', `children', or `subtree'.

org-export-filter-dynamic-block-functions nil

List of functions applied to a transcoded dynamic-block.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-babel-call-functions nil

List of functions applied to a transcoded babel-call.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-metadown-hook nil

Hook for functions attaching themselves to `M-down'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-shiftdown-hook nil

Hook for functions attaching themselves to `S-down'.

See `org-ctrl-c-ctrl-c-hook' for more information.

orgtbl-mode-hook nil

Hook run after entering or leaving `orgtbl-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-filter-italic-functions nil

List of functions applied to transcoded italic text.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

List of functions applied to a transcoded statistics-cookie.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-tab-after-check-for-cycling-hook nil

Hook for functions to attach themselves to TAB.

See `org-ctrl-c-ctrl-c-hook' for more information. This hook runs after it has been established that not table field motion and not visibility should be done because of current context. This is probably the place where a package like yasnippets can hook in.

org-clock-in-prepare-hook nil

Hook run when preparing the clock.

This hook is run before anything happens to the task that you want to clock in. For example, you can use this hook to add an effort property.

org-capture-mode-hook nil

Hook run after entering or leaving `org-capture-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-filter-footnote-definition-functions nil

List of functions applied to a transcoded footnote-definition.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-agenda-finalize-hook nil

Hook run just before displaying an agenda buffer.

The buffer is still writable when the hook is called. You can modify some of the buffer substrings but you should be extra careful not to modify the text properties of the agenda headlines as the agenda display heavily relies on them.

org-export-filter-planning-functions nil

List of functions applied to a transcoded planning.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-src-mode-hook nil

Hook run after entering or leaving `org-src-mode'.

No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.)

org-export-html-after-blockquotes-hook nil

org-export-filter-table-cell-functions nil

List of functions applied to a transcoded table-cell.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-after-todo-state-change-hook nil

Hook which is run after the state of a TODO item was changed.

The new state (a string with a TODO keyword, or nil) is available in the Lisp variable `org-state'.

org-export-blocks-postblock-hook nil

Run after blocks have been processed with `org-export-blocks-preprocess'.

List of functions to be prepended to ORG-OPEN-LINK-FUNCTIONS when ORG-CTAGS is active.

org-export-preprocess-final-hook nil

org-shiftright-final-hook nil

Hook for functions attaching themselves to `S-right'.

This one runs after all other options except shift-select have been excluded. See `org-ctrl-c-ctrl-c-hook' for more information.

org-export-filter-plain-text-functions nil

List of functions applied to plain text.

Each filter is called with three arguments: a string which contains no Org syntax, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-agenda-bulk-custom-functions nil

Alist of characters and custom functions for bulk actions.

For example, this value makes those two functions available: '((?R set-category) (?C bulk-cut)) With selected entries in an agenda buffer, `B R' will call the custom function `set-category' on the selected entries. Note that functions in this alist don't need to be quoted.

org-export-filter-property-drawer-functions nil

List of functions applied to a transcoded property-drawer.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-after-sorting-entries-or-items-hook nil

Hook that is run after a bunch of entries or items have been sorted.

When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.

org-shiftmetaright-hook nil

Hook for functions attaching themselves to `M-S-right'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-metareturn-hook nil

Hook for functions attaching themselves to `M-RET'.

See `org-ctrl-c-ctrl-c-hook' for more information.

org-todo-setup-filter-hook nil

Hook for functions that pre-filter todo specs.

Each function takes a todo spec and returns either nil or the spec transformed into canonical form.

List of functions that are called to create and store a link.

Each function will be called in turn until one returns a non-nil value. Each function should check if it is responsible for creating this link (for example by looking at the major mode). If not, it must exit and return nil. If yes, it should return a non-nil value after a calling `org-store-link-props' with a list of properties and values. Special properties are: :type The link prefix, like "http". This must be given. :link The link, like "http://www.astro.uva.nl/~dominik". This is obligatory as well. :description Optional default description for the second pair of brackets in an Org-mode link. The user can still change this when inserting this link into an Org-mode buffer. In addition to these, any additional properties can be specified and then used in capture templates.

org-after-todo-statistics-hook nil

Hook that is called after a TODO statistics cookie has been updated.

Each function is called with two arguments: the number of not-done entries and the number of done entries. For example, the following function, when added to this hook, will switch an entry to DONE when all children are done, and back to TODO when new entries are set to a TODO status. Note that this hook is only called when there is a statistics cookie in the headline! (defun org-summary-todo (n-done n-not-done) "Switch entry to DONE when all subentries are done, to TODO otherwise." (let (org-log-done org-log-states) ; turn off logging (org-todo (if (= n-not-done 0) "DONE" "TODO"))))

org-export-filter-comment-functions nil

List of functions applied to a transcoded comment.

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

org-export-filter-clock-functions nil

List of functions applied to a transcoded clock.

Commands

Each filter is called with three arguments: the transcoded data, as a string, the back-end, as a symbol, and the communication channel, as a plist. It must return a string or nil.

:PROPERTIES: :CUSTOM_ID: commands :END:

org-attach-new (file)

:PROPERTIES: :CUSTOM_ID: org-attach-new :END:

org-agenda-sunrise-sunset (arg)

Create a new attachment FILE for the current task.
The attachment is created as an Emacs buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-sunrise-sunset :END:

org-agenda-exit

Display sunrise and sunset for the cursor date.
Latitude and longitude can be specified with the variables
`calendar-latitude' and `calendar-longitude'.  When called with prefix
argument, latitude and longitude will be prompted for.

:PROPERTIES: :CUSTOM_ID: org-agenda-exit :END:

org-html-export-as-html (&optional async subtreep visible-only body-only ext-plist)

Exit the agenda and restore the window configuration.
Also kill Org-mode buffers loaded by `org-agenda'.  Org-mode
buffers visited directly by the user will not be touched.

:PROPERTIES: :CUSTOM_ID: org-html-export-as-html :END:

org-set-tags-to (data)

Export current buffer to an HTML buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "" and "" tags.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org HTML Export*", which
will be displayed when `org-export-show-temporary-export-buffer'
is non-nil.

:PROPERTIES: :CUSTOM_ID: org-set-tags-to :END:

orgstruct-mode (&optional arg)

Set the tags of the current entry to DATA, replacing the current tags.
DATA may be a tags string like :aa:bb:cc:, or a list of tags.
If DATA is nil or the empty string, any tags will be removed.

:PROPERTIES: :CUSTOM_ID: orgstruct-mode :END:

org-protocol-create (&optional project-plist)

Toggle the minor mode `orgstruct-mode'.
This mode is for using Org-mode structure commands in other
modes.  The following keys behave as if Org-mode were active, if
the cursor is on a headline, or on a plain list item (both as
defined by Org-mode).

:PROPERTIES: :CUSTOM_ID: org-protocol-create :END:

org-clone-subtree-with-time-shift (n &optional shift)

Create a new org-protocol project interactively.
An org-protocol project is an entry in
`org-protocol-project-alist' which is used by
`org-protocol-open-source'.  Optionally use PROJECT-PLIST to
initialize the defaults for this project.  If PROJECT-PLIST is
the cdr of an element in `org-publish-project-alist', reuse
:base-directory, :html-extension and :base-extension.

:PROPERTIES: :CUSTOM_ID: org-clone-subtree-with-time-shift :END:

org-agenda-goto (&optional highlight)

Clone the task (subtree) at point N times.
The clones will be inserted as siblings.

In interactive use, the user will be prompted for the number of
clones to be produced.  If the entry has a timestamp, the user
will also be prompted for a time shift, which may be a repeater
as used in time stamps, for example `+3d'.  To disable this,
you can call the function with a universal prefix argument.

When a valid repeater is given and the entry contains any time
stamps, the clones will become a sequence in time, with time
stamps in the subtree shifted for each clone produced.  If SHIFT
is nil or the empty string, time stamps will be left alone.  The
ID property of the original subtree is removed.

If the original subtree did contain time stamps with a repeater,
the following will happen:
- the repeater will be removed in each clone
- an additional clone will be produced, with the current, unshifted
  date(s) in the entry.
- the original entry will be placed *after* all the clones, with
  repeater intact.
- the start days in the repeater in the original entry will be shifted
  to past the last clone.
In this way you can spell out a number of instances of a repeating task,
and still retain the repeater to cover future instances of the task.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto :END:

org-w3m-copy-for-org-mode

Go to the Org-mode file which contains the item at point.

:PROPERTIES: :CUSTOM_ID: org-w3m-copy-for-org-mode :END:

org-shiftcontrolright

Copy current buffer content or active region with `org-mode' style links.
This will encode `link-title' and `link-location' with
`org-make-link-string', and insert the transformed test into the kill ring,
so that it can be yanked into an Org-mode buffer with links working correctly.

:PROPERTIES: :CUSTOM_ID: org-shiftcontrolright :END:

  • Access: <C-S-right>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Next keyword set>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Previous keyword set>
  • In file: org.el
  • Find modifications in git logs

org-clock-in (&optional select start-time)

Switch to next TODO set.

:PROPERTIES: :CUSTOM_ID: org-clock-in :END:

org-priority-up

Start the clock on the current item.
If necessary, clock-out of the currently active clock.
With a prefix argument SELECT (C-u), offer a list of recently clocked
tasks to clock into.  When SELECT is C-u C-u, clock into the current task
and mark it as the default task, a special task that will always be offered
in the clocking selection, associated with the letter `d'.
When SELECT is C-u C-u C-u, clock in by using the last clock-out
time as the start time (see `org-clock-continuously' to
make this the default behavior.)

:PROPERTIES: :CUSTOM_ID: org-priority-up :END:

org-todo (&optional arg)

Increase the priority of the current item.

:PROPERTIES: :CUSTOM_ID: org-todo :END:

org-remove-file (&optional file)

Change the TODO state of an item.
The state of an item is given by a keyword at the start of the heading,
like
     *** TODO Write paper
     *** DONE Call mom

The different keywords are specified in the variable `org-todo-keywords'.
By default the available states are "TODO" and "DONE".
So for this example: when the item starts with TODO, it is changed to DONE.
When it starts with DONE, the DONE is removed.  And when neither TODO nor
DONE are present, add TODO at the beginning of the heading.

With C-u prefix arg, use completion to determine the new state.
With numeric prefix arg, switch to that state.
With a double C-u prefix, switch to the next set of TODO keywords (nextset).
With a triple C-u prefix, circumvent any state blocking.
With a numeric prefix arg of 0, inhibit note taking for the change.

For calling through lisp, arg is also interpreted in the following way:
'none             -> empty state
""(empty string)  -> switch to empty state
'done             -> switch to DONE
'nextset          -> switch to the next set of keywords
'previousset      -> switch to the previous set of keywords
"WAITING"         -> switch to the specified keyword, but only if it
                     really is a member of `org-todo-keywords'.

:PROPERTIES: :CUSTOM_ID: org-remove-file :END:

org-agenda-quit

Remove current file from the list of files in variable `org-agenda-files'.
These are the files which are being checked for agenda entries.
Optional argument FILE means use this file instead of the current.

:PROPERTIES: :CUSTOM_ID: org-agenda-quit :END:

org-show-subtree

Exit the agenda and restore the window configuration.
When `org-agenda-sticky' is non-nil, only bury the agenda.

:PROPERTIES: :CUSTOM_ID: org-show-subtree :END:

org-timer-start (&optional offset)

Show everything after this heading at deeper levels.

:PROPERTIES: :CUSTOM_ID: org-timer-start :END:

org-ctrl-c-star

Set the starting time for the relative timer to now.
When called with prefix argument OFFSET, prompt the user for an offset time,
with the default taken from a timer stamp at point, if any.
If OFFSET is a string or an integer, it is directly taken to be the offset
without user interaction.
When called with a double prefix arg, all timer strings in the active
region will be shifted by a specific amount.  You will be prompted for
the amount, with the default to make the first timer string in
the region 0:00:00.

:PROPERTIES: :CUSTOM_ID: org-ctrl-c-star :END:

org-metaright (&optional arg)

Compute table, or change heading status of lines.
Calls `org-table-recalculate' or `org-toggle-heading',
depending on context.

:PROPERTIES: :CUSTOM_ID: org-metaright :END:

org-agenda-bulk-mark (&optional arg)

Demote a subtree, a list item or move table column to right.
In front of a drawer or a block keyword, indent it correctly.
With no specific context, calls the Emacs default `forward-word'.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark :END:

Mark the entry at point for future bulk action.

:PROPERTIES: :CUSTOM_ID: org-insert-link :END:

org-babel-exp-src-block (&rest headers)

Insert a link.  At the prompt, enter the link.

Completion can be used to insert any of the link protocol prefixes like
http or ftp in use.

The history can be used to select a link previously stored with
`org-store-link'.  When the empty string is entered (i.e. if you just
press RET at the prompt), the link defaults to the most recently
stored link.  As SPC triggers completion in the minibuffer, you need to
use M-SPC or C-q SPC to force the insertion of a space character.

You will also be prompted for a description, and if one is given, it will
be displayed in the buffer instead of the link.

If there is already a link at point, this command will allow you to edit link
and description parts.

With a C-u prefix, prompts for a file to link to.  The file name can
be selected using completion.  The path to the file will be relative to the
current directory if the file is in the current directory or a subdirectory.
Otherwise, the link will be the absolute path as completed in the minibuffer
(i.e. normally ~/path/to/file).  You can configure this behavior using the
option `org-link-file-path-type'.

With two C-u prefixes, enforce an absolute path even if the file is in
the current directory or below.

With three C-u prefixes, negate the meaning of
`org-keep-stored-link-after-insertion'.

If `org-make-link-description-function' is non-nil, this function will be
called with the link target, and the result will be the default
link description.

If the LINK-LOCATION parameter is non-nil, this value will be
used as the link location instead of reading one interactively.

If the DEFAULT-DESCRIPTION parameter is non-nil, this value will
be used as the default description.

:PROPERTIES: :CUSTOM_ID: org-babel-exp-src-block :END:

org-toggle-time-stamp-overlays

Process source block for export.
Depending on the 'export' headers argument, replace the source
code block like this:

both ---- display the code and the results

code ---- the default, display the code inside the block but do
          not process

results - just like none only the block is run on export ensuring
          that it's results are present in the org-mode buffer

none ---- do not display either code or results upon export

Assume point is at the beginning of block's starting line.

:PROPERTIES: :CUSTOM_ID: org-toggle-time-stamp-overlays :END:

org-agenda (&optional arg org-keys restriction)

Toggle the use of custom time stamp formats.

:PROPERTIES: :CUSTOM_ID: org-agenda :END:

org-date-from-calendar

Dispatch agenda commands to collect entries to the agenda buffer.
Prompts for a command to execute.  Any prefix arg will be passed
on to the selected command.  The default selections are:

a     Call `org-agenda-list' to display the agenda for current day or week.
t     Call `org-todo-list' to display the global todo list.
T     Call `org-todo-list' to display the global todo list, select only
      entries with a specific TODO keyword (the user gets a prompt).
m     Call `org-tags-view' to display headlines with tags matching
      a condition  (the user is prompted for the condition).
M     Like `m', but select only TODO entries, no ordinary headlines.
L     Create a timeline for the current buffer.
e     Export views to associated files.
s     Search entries for keywords.
S     Search entries for keywords, only with TODO keywords.
/     Multi occur across all agenda files and also files listed
      in `org-agenda-text-search-extra-files'.
<     Restrict agenda commands to buffer, subtree, or region.
      Press several times to get the desired effect.
>     Remove a previous restriction.
#     List "stuck" projects.
!     Configure what "stuck" means.
C     Configure custom agenda commands.

More commands can be added by configuring the variable
`org-agenda-custom-commands'.  In particular, specific tags and TODO keyword
searches can be pre-defined in this way.

If the current buffer is in Org-mode and visiting a file, you can also
first press `<' once to indicate that the agenda should be temporarily
(until the next use of C-c a) restricted to the current file.
Pressing `<' twice means to restrict to the current subtree or region
(if active).

:PROPERTIES: :CUSTOM_ID: org-date-from-calendar :END:

org-timestamp-up (&optional arg)

Insert time stamp corresponding to cursor date in *Calendar* buffer.
If there is already a time stamp at the cursor position, update it.

:PROPERTIES: :CUSTOM_ID: org-timestamp-up :END:

org-occur-in-agenda-files (regexp &optional nlines)

Increase the date item at the cursor by one.
If the cursor is on the year, change the year.  If it is on the month,
the day or the time, change that.
With prefix ARG, change by that many units.

:PROPERTIES: :CUSTOM_ID: org-occur-in-agenda-files :END:

org-agenda-filter-remove-all

Call `multi-occur' with buffers for all agenda files.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-remove-all :END:

org-babel-tangle (&optional arg target-file lang)

Remove all filters from the current agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-babel-tangle :END:

org-mode

Write code blocks to source-specific files.
Extract the bodies of all source code blocks from the current
file into their own source-specific files.
With one universal prefix argument, only tangle the block at point.
When two universal prefix arguments, only tangle blocks for the
tangle file of the block at point.
Optional argument TARGET-FILE can be used to specify a default
export file for all source blocks.  Optional argument LANG can be
used to limit the exported source code blocks by language.

:PROPERTIES: :CUSTOM_ID: org-mode :END:

org-beginning-of-item-list

Outline-based notes management and organizer, alias
"Carsten's outline-mode for keeping track of everything."

Org-mode develops organizational tasks around a NOTES file which
contains information about projects as plain text.  Org-mode is
implemented on top of outline-mode, which is ideal to keep the content
of large files well structured.  It supports ToDo items, deadlines and
time stamps, which magically appear in the diary listing of the Emacs
calendar.  Tables are easily created with a built-in table editor.
Plain text URL-like links connect to websites, emails (VM), Usenet
messages (Gnus), BBDB entries, and any files related to the project.
For printing and sharing of notes, an Org-mode file (or a part of it)
can be exported as a structured ASCII or HTML file.

The following commands are available:

key             binding
---             -------

C-a		org-beginning-of-line
C-c		Prefix Command
C-e		org-end-of-line
TAB		org-cycle
C-j		org-return-indent
C-k		org-kill-line
RET		org-return
C-y		org-yank
ESC		Prefix Command
|		org-force-self-insert
C-#		org-table-rotate-recalc-marks
C-'		org-cycle-agenda-files
C-,		org-cycle-agenda-files
	org-shiftcontroldown
	org-shiftcontrolleft
	org-insert-todo-heading-respect-content
	org-shiftcontrolright
	org-shiftcontrolup
	org-insert-heading-respect-content
		org-force-cycle-archived
	org-shiftmetadown
	org-shiftmetaleft
	org-insert-todo-heading
	org-shiftmetaright
	org-shiftmetaup
	org-metadown
	org-metaleft
	org-meta-return
	org-metaright
		org-metaup
	org-shiftdown
			org-shifttab
	org-shiftleft
	org-mouse-yank-link
	org-table-copy-down
	org-shiftright
		org-shifttab
		org-shiftup
	org-shifttab
	org-mouse-down-mouse
	org-mouse-yank-link
	org-mouse-show-context-menu
		Prefix Command
		org-cycle

C-M-i		pcomplete
M-RET		org-insert-heading
C-M-t		org-transpose-element
M-a		org-backward-sentence
M-e		org-forward-sentence
M-h		org-mark-element
M-{		org-backward-element
M-}		org-forward-element

C-c C-a		org-attach
C-c C-b		org-backward-heading-same-level
C-c C-c		org-ctrl-c-ctrl-c
C-c C-d		org-deadline
C-c C-e		org-export-dispatch
C-c C-f		org-forward-heading-same-level
C-c C-j		org-goto
C-c C-k		org-kill-note-or-show-branches
C-c C-l		org-insert-link
C-c RET		org-ctrl-c-ret
C-c C-o		org-open-at-point
C-c C-q		org-set-tags-command
C-c C-r		org-reveal
C-c C-s		org-schedule
C-c C-t		org-todo
C-c C-v		Prefix Command
C-c C-w		org-refile
C-c C-x		Prefix Command
C-c C-y		org-evaluate-time-range
C-c C-z		org-add-note
C-c ESC		Prefix Command
C-c C-^		org-up-element
C-c C-_		org-down-element
C-c SPC		org-table-blank-field
C-c !		org-time-stamp-inactive
C-c #		org-update-statistics-cookies
C-c $		org-archive-subtree
C-c %		org-mark-ring-push
C-c &		org-mark-ring-goto
C-c '		org-edit-special
C-c *		org-ctrl-c-star
C-c +		org-table-sum
C-c ,		org-priority
C-c -		org-ctrl-c-minus
C-c .		org-time-stamp
C-c /		org-sparse-tree
C-c :		org-toggle-fixed-width-section
C-c ;		org-toggle-comment
C-c <		org-date-from-calendar
C-c =		org-table-eval-formula
C-c >		org-goto-calendar
C-c ?		org-table-field-info
C-c @		org-mark-subtree
C-c [		org-agenda-file-to-front
C-c \		org-match-sparse-tree
C-c ]		org-remove-file
C-c ^		org-sort
C-c `		org-table-edit-field
C-c {		org-table-toggle-formula-debugger
C-c |		org-table-create-or-convert-from-region
C-c }		org-table-toggle-coordinate-overlays
C-c ~		org-table-create-with-table.el
C-c C-*		org-list-make-subtree

 	org-backward-element
 	org-delete-backward-char
 		org-delete-char
 	org-forward-element
 		org-open-line
 
				org-backward-heading-same-level
 	org-demote-subtree
 
				org-forward-heading-same-level
 
				org-ctrl-c-ret
 	org-mark-subtree
 	org-promote-subtree
 	org-self-insert-command
 		org-kill-note-or-show-branches
 		org-show-subtree
 	org-transpose-words

C-c C-a		show-all
  (that binding is currently shadowed by another mode)
C-c C-b		outline-backward-same-level
  (that binding is currently shadowed by another mode)
C-c C-c		hide-entry
  (that binding is currently shadowed by another mode)
C-c C-d		hide-subtree
  (that binding is currently shadowed by another mode)
C-c C-e		show-entry
  (that binding is currently shadowed by another mode)
C-c C-f		outline-forward-same-level
  (that binding is currently shadowed by another mode)
C-c TAB		show-children
C-c C-k		show-branches
  (that binding is currently shadowed by another mode)
C-c C-l		hide-leaves
  (that binding is currently shadowed by another mode)
C-c RET		outline-insert-heading
  (that binding is currently shadowed by another mode)
C-c C-n		outline-next-visible-heading
C-c C-o		hide-other
  (that binding is currently shadowed by another mode)
C-c C-p		outline-previous-visible-heading
C-c C-q		hide-sublevels
  (that binding is currently shadowed by another mode)
C-c C-s		show-subtree
  (that binding is currently shadowed by another mode)
C-c C-t		hide-body
  (that binding is currently shadowed by another mode)
C-c C-u		outline-up-heading
C-c C-v		outline-move-subtree-down
  (that binding is currently shadowed by another mode)
C-c C-^		outline-move-subtree-up
  (that binding is currently shadowed by another mode)
C-c @		outline-mark-subtree
  (that binding is currently shadowed by another mode)
C-c C-<		outline-promote
C-c C->		outline-demote

C-M-i		ispell-complete-word
  (that binding is currently shadowed by another mode)

C-c C-M-l	org-insert-all-links
C-c M-b		org-previous-block
C-c M-f		org-next-block
C-c M-w		org-copy

C-c C-v C-a	org-babel-sha1-hash
C-c C-v C-b	org-babel-execute-buffer
C-c C-v C-c	org-babel-check-src-block
C-c C-v C-d	org-babel-demarcate-block
C-c C-v C-e	org-babel-execute-maybe
C-c C-v C-f	org-babel-tangle-file
C-c C-v TAB	org-babel-view-src-block-info
C-c C-v C-j	org-babel-insert-header-arg
C-c C-v C-l	org-babel-load-in-session
C-c C-v C-n	org-babel-next-src-block
C-c C-v C-o	org-babel-open-src-block-result
C-c C-v C-p	org-babel-previous-src-block
C-c C-v C-r	org-babel-goto-named-result
C-c C-v C-s	org-babel-execute-subtree
C-c C-v C-t	org-babel-tangle
C-c C-v C-u	org-babel-goto-src-block-head
C-c C-v C-v	org-babel-expand-src-block
C-c C-v C-x	org-babel-do-key-sequence-in-edit-buffer
C-c C-v C-z	org-babel-switch-to-session
C-c C-v ESC	Prefix Command
C-c C-v I	org-babel-view-src-block-info
C-c C-v a	org-babel-sha1-hash
C-c C-v b	org-babel-execute-buffer
C-c C-v c	org-babel-check-src-block
C-c C-v d	org-babel-demarcate-block
C-c C-v e	org-babel-execute-maybe
C-c C-v f	org-babel-tangle-file
C-c C-v g	org-babel-goto-named-src-block
C-c C-v h	org-babel-describe-bindings
C-c C-v i	org-babel-lob-ingest
C-c C-v j	org-babel-insert-header-arg
C-c C-v l	org-babel-load-in-session
C-c C-v n	org-babel-next-src-block
C-c C-v o	org-babel-open-src-block-result
C-c C-v p	org-babel-previous-src-block
C-c C-v r	org-babel-goto-named-result
C-c C-v s	org-babel-execute-subtree
C-c C-v t	org-babel-tangle
C-c C-v u	org-babel-goto-src-block-head
C-c C-v v	org-babel-expand-src-block
C-c C-v x	org-babel-do-key-sequence-in-edit-buffer
C-c C-v z	org-babel-switch-to-session-with-code

C-c C-x C-a	org-archive-subtree-default
C-c C-x C-b	org-toggle-checkbox
C-c C-x C-c	org-columns
C-c C-x C-d	org-clock-display
C-c C-x C-f	org-emphasize
C-c C-x TAB	org-clock-in
C-c C-x C-j	org-clock-goto
C-c C-x C-l	org-preview-latex-fragment
C-c C-x RET	Prefix Command
C-c C-x C-n	org-next-link
C-c C-x C-o	org-clock-out
C-c C-x C-p	org-previous-link
C-c C-x C-q	org-clock-cancel
C-c C-x C-r	org-clock-report
C-c C-x C-s	org-advertized-archive-subtree
C-c C-x C-t	org-toggle-time-stamp-overlays
C-c C-x C-u	org-dblock-update
C-c C-x C-v	org-toggle-inline-images
C-c C-x C-w	org-cut-special
C-c C-x C-x	org-clock-in-last
C-c C-x C-y	org-paste-special
C-c C-x C-z	org-resolve-clocks
C-c C-x ESC	Prefix Command
C-c C-x !	org-reload
C-c C-x ,	org-timer-pause-or-continue
C-c C-x -	org-timer-item
C-c C-x .	org-timer
C-c C-x 0	org-timer-start
C-c C-x :	org-timer-cancel-timer
C-c C-x ;	org-timer-set-timer
C-c C-x <	org-agenda-set-restriction-lock
C-c C-x >	org-agenda-remove-restriction-lock
C-c C-x A	org-archive-to-archive-sibling
C-c C-x E	org-inc-effort
C-c C-x G	org-feed-goto-inbox
C-c C-x P	org-set-property-and-value
C-c C-x [	org-reftex-citation
C-c C-x \	org-toggle-pretty-entities
C-c C-x _	org-timer-stop
C-c C-x a	org-toggle-archive-tag
C-c C-x b	org-tree-to-indirect-buffer
C-c C-x c	org-clone-subtree-with-time-shift
C-c C-x d	org-insert-drawer
C-c C-x e	org-set-effort
C-c C-x f	org-footnote-action
C-c C-x g	org-feed-update-all
C-c C-x i	org-insert-columns-dblock
C-c C-x o	org-toggle-ordered-property
C-c C-x p	org-set-property
C-c C-x q	org-toggle-tags-groups
C-c C-x v	org-copy-visible

C-c C-v C-M-h	org-babel-mark-block

C-c C-x C-M-v	org-redisplay-inline-images
C-c C-x M-w	org-copy-special

C-c C-x RET g	org-mobile-pull
C-c C-x RET p	org-mobile-push



In addition to any hooks its parent mode `outline-mode' might have run,
this mode runs the hook `org-mode-hook', as the final step
during initialization.

:PROPERTIES: :CUSTOM_ID: org-beginning-of-item-list :END:

org-babel-open-src-block-result (&optional re-run)

Go to the beginning item of the current list or sublist.
Throw an error when not in a list.

:PROPERTIES: :CUSTOM_ID: org-babel-open-src-block-result :END:

org-time-stamp (arg &optional inactive)

If `point' is on a src block then open the results of the
source code block, otherwise return nil.  With optional prefix
argument RE-RUN the source-code block is evaluated even if
results already exist.

:PROPERTIES: :CUSTOM_ID: org-time-stamp :END:

org-list-to-generic (list params)

Prompt for a date/time and insert a time stamp.
If the user specifies a time like HH:MM or if this command is
called with at least one prefix argument, the time stamp contains
the date and the time.  Otherwise, only the date is be included.

All parts of a date not specified by the user is filled in from
the current date/time.  So if you just press return without
typing anything, the time stamp will represent the current
date/time.

If there is already a timestamp at the cursor, it will be
modified.

With two universal prefix arguments, insert an active timestamp
with the current time without prompting the user.

:PROPERTIES: :CUSTOM_ID: org-list-to-generic :END:

org-forward-heading-same-level (arg &optional invisible-ok)

Convert a LIST parsed through `org-list-parse-list' to other formats.
Valid parameters PARAMS are:

:ustart	    String to start an unordered list
:uend	    String to end an unordered list

:ostart	    String to start an ordered list
:oend	    String to end an ordered list

:dstart	    String to start a descriptive list
:dend	    String to end a descriptive list
:dtstart    String to start a descriptive term
:dtend	    String to end a descriptive term
:ddstart    String to start a description
:ddend	    String to end a description

:splice	    When set to t, return only list body lines, don't wrap
	    them into :[u/o]start and :[u/o]end.  Default is nil.

:istart	    String to start a list item.
:icount     String to start an item with a counter.
:iend	    String to end a list item
:isep	    String to separate items
:lsep	    String to separate sublists
:csep	    String to separate text from a sub-list

:cboff      String to insert for an unchecked check-box
:cbon       String to insert for a checked check-box
:cbtrans    String to insert for a check-box in transitional state

:nobr       Non-nil means remove line breaks in lists items.

Alternatively, each parameter can also be a form returning
a string.  These sexp can use keywords `counter' and `depth',
representing respectively counter associated to the current
item, and depth of the current sub-list, starting at 0.
Obviously, `counter' is only available for parameters applying to
items.

:PROPERTIES: :CUSTOM_ID: org-forward-heading-same-level :END:

org-insert-todo-subheading (arg)

Move forward to the ARG'th subheading at same level as this one.
Stop at the first and last subheadings of a superior heading.
Normally this only looks at visible headings, but when INVISIBLE-OK is
non-nil it will also look at invisible ones.

:PROPERTIES: :CUSTOM_ID: org-insert-todo-subheading :END:

org-clock-in-last (&optional arg)

Insert a new subheading with TODO keyword or checkbox and demote it.
Works for outline headings and for plain lists alike.

:PROPERTIES: :CUSTOM_ID: org-clock-in-last :END:

org-create-customize-menu

Clock in the last closed clocked item.
When already clocking in, send an warning.
With a universal prefix argument, select the task you want to
clock in from the last clocked in tasks.
With two universal prefix arguments, start clocking using the
last clock-out time, if any.
With three universal prefix arguments, interactively prompt
for a todo state to switch to, overriding the existing value
`org-clock-in-switch-to-state'.

:PROPERTIES: :CUSTOM_ID: org-create-customize-menu :END:

org-agenda-bulk-mark-regexp (regexp)

Create a full customization menu for Org-mode, insert it into the menu.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark-regexp :END:

org-info (&optional node)

Mark entries matching REGEXP for future agenda bulk action.

:PROPERTIES: :CUSTOM_ID: org-info :END:

org-table-create (&optional size)

Read documentation for Org-mode in the info system.
With optional NODE, go directly to that node.

:PROPERTIES: :CUSTOM_ID: org-table-create :END:

org-insert-heading-after-current

Query for a size and insert a table skeleton.
SIZE is a string Columns x Rows like for example "3x2".

:PROPERTIES: :CUSTOM_ID: org-insert-heading-after-current :END:

Insert a new heading with same level as current, after current subtree.

:PROPERTIES: :CUSTOM_ID: org-id-store-link :END:

org-columns-get-format (&optional fmt-string)

Store a link to the current entry, using its ID.

:PROPERTIES: :CUSTOM_ID: org-columns-get-format :END:

org-kill-note-or-show-branches

:PROPERTIES: :CUSTOM_ID: org-kill-note-or-show-branches :END:

org-agenda-date-prompt (arg)

If this is a Note buffer, abort storing the note.  Else call `show-branches'.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-prompt :END:

org-beamer-export-to-pdf (&optional async subtreep visible-only body-only ext-plist)

Change the date of this item.  Date is prompted for, with default today.
The prefix ARG is passed to the `org-time-stamp' command and can therefore
be used to request time specification in the time stamp.

:PROPERTIES: :CUSTOM_ID: org-beamer-export-to-pdf :END:

org-babel-goto-named-result (name)

Export current buffer as a Beamer presentation (PDF).

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return PDF file's name.

:PROPERTIES: :CUSTOM_ID: org-babel-goto-named-result :END:

org-bibtex-search (string)

Go to a named result.

:PROPERTIES: :CUSTOM_ID: org-bibtex-search :END:

org-koma-letter-export-to-pdf (&optional async subtreep visible-only body-only ext-plist)

Search for bibliographical entries in agenda files.
This function relies `org-search-view' to locate results.

:PROPERTIES: :CUSTOM_ID: org-koma-letter-export-to-pdf :END:

org-toggle-custom-properties-visibility

Export current buffer as a KOMA Scrlttr2 letter (pdf).

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{letter}" and "\end{letter}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return PDF file's name.

:PROPERTIES: :CUSTOM_ID: org-toggle-custom-properties-visibility :END:

org-agenda-manipulate-query-subtract-re

Display or hide properties in `org-custom-properties'.

:PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-subtract-re :END:

org-capture-string (string &optional keys)

Manipulate the query by adding a search regexp with negative selection.
Negative selection means regexp must not match for selection of an entry.

:PROPERTIES: :CUSTOM_ID: org-capture-string :END:

org-copy

Capture STRING with the template selected by KEYS.

:PROPERTIES: :CUSTOM_ID: org-copy :END:

org-list-send-list (&optional maybe)

Like `org-refile', but copy.

:PROPERTIES: :CUSTOM_ID: org-list-send-list :END:

org-capture-mode (&optional arg)

Send a transformed version of this list to the receiver position.
With argument MAYBE, fail quietly if no transformation is defined
for this list.

:PROPERTIES: :CUSTOM_ID: org-capture-mode :END:

org-table-fedit-menu (event)

Minor mode for special key bindings in a capture buffer.

Turning on this mode runs the normal hook `org-capture-mode-hook'.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-menu :END:

org-first-sibling-p

Org Edit Formulas Menu

:PROPERTIES: :CUSTOM_ID: org-first-sibling-p :END:

org-ctrl-c-minus

Is this heading the first child of its parents?

:PROPERTIES: :CUSTOM_ID: org-ctrl-c-minus :END:

org-return-indent

Insert separator line in table or modify bullet status of line.
Also turns a plain line or a region of lines into list items.
Calls `org-table-insert-hline', `org-toggle-item', or
`org-cycle-list-bullet', depending on context.

:PROPERTIES: :CUSTOM_ID: org-return-indent :END:

org-agenda-todo (&optional arg)

Goto next table row or insert a newline and indent.
Calls `org-table-next-row' or `newline-and-indent', depending on
context.  See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-agenda-todo :END:

org-export-preprocess-string (string &rest parameters)

Cycle TODO state of line at point, also in Org-mode file.
This changes the line at point, all other lines in the agenda referring to
the same tree node, and the headline of the tree node in the Org-mode file.

:PROPERTIES: :CUSTOM_ID: org-export-preprocess-string :END:

org-agenda-date-earlier-minutes (arg)

Cleanup STRING so that the true exported has a more consistent source.
This function takes STRING, which should be a buffer-string of an org-file
to export.  It then creates a temporary buffer where it does its job.
The result is then again returned as a string, and the exporter works
on this string to produce the exported version.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-earlier-minutes :END:

org-inlinetask-demote

Change the time of this item, in units of `org-time-stamp-rounding-minutes'.

:PROPERTIES: :CUSTOM_ID: org-inlinetask-demote :END:

org-toggle-timestamp-type

Demote the inline task at point.
If the task has an end part, also demote it.

:PROPERTIES: :CUSTOM_ID: org-toggle-timestamp-type :END:

org-ctags-all-tags-in-current-tags-table

Toggle the type ( or [inactive]) of a time stamp.

:PROPERTIES: :CUSTOM_ID: org-ctags-all-tags-in-current-tags-table :END:

org-attach-attach-ln

Read all tags defined in the active TAGS file, into a list of strings.
Return the list.

:PROPERTIES: :CUSTOM_ID: org-attach-attach-ln :END:

org-table-convert

Attach a file by creating a hard link to it.
Beware that this does not work on systems that do not support hard links.
On some systems, this apparently does copy the file instead.

:PROPERTIES: :CUSTOM_ID: org-table-convert :END:

org-latex-export-to-pdf (&optional async subtreep visible-only body-only ext-plist)

Convert from `org-mode' table to table.el and back.
Obviously, this only works within limits.  When an Org-mode table is
converted to table.el, all horizontal separator lines get lost, because
table.el uses these as cell boundaries and has no notion of horizontal lines.
A table.el table can be converted to an Org-mode table only if it does not
do row or column spanning.  Multiline cells will become multiple cells.
Beware, Org-mode does not test if the table can be successfully converted - it
blindly applies a recipe that works for simple tables.

:PROPERTIES: :CUSTOM_ID: org-latex-export-to-pdf :END:

org-change-tag-in-region (beg end tag off)

Export current buffer to LaTeX then process through to PDF.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return PDF file's name.

:PROPERTIES: :CUSTOM_ID: org-change-tag-in-region :END:

org-indent-mode (&optional arg)

Add or remove TAG for each entry in the region.
This works in the agenda, and also in an org-mode buffer.

:PROPERTIES: :CUSTOM_ID: org-indent-mode :END:

org-agenda-previous-line

When active, indent text according to outline structure.

Internally this works by adding `line-prefix' and `wrap-prefix'
properties, after each buffer modification, on the modified zone.

The process is synchronous.  Though, initial indentation of
buffer, which can take a few seconds on large buffers, is done
during idle time.

:PROPERTIES: :CUSTOM_ID: org-agenda-previous-line :END:

org-attach-reveal (&optional if-exists)

Move cursor to the previous line, and show if follow-mode is active.

:PROPERTIES: :CUSTOM_ID: org-attach-reveal :END:

org-table-maybe-recalculate-line

Show the attachment directory of the current task.
This will attempt to use an external program to show the directory.

:PROPERTIES: :CUSTOM_ID: org-table-maybe-recalculate-line :END:

org-agenda-mode

Recompute the current line if marked for it, and if we haven't just done it.

:PROPERTIES: :CUSTOM_ID: org-agenda-mode :END:

org-overview

Mode for time-sorted view on action items in Org-mode files.

The following commands are available:

key             binding
---             -------

C-c		Prefix Command
TAB		org-agenda-goto
C-k		org-agenda-kill
RET		org-agenda-switch-to
C-n		org-agenda-next-line
C-p		org-agenda-previous-line
C-x		Prefix Command
ESC		Prefix Command
C-_		org-agenda-undo
SPC		org-agenda-show-and-scroll-up
!		org-agenda-toggle-deadlines
#		org-agenda-dim-blocked-tasks
$		org-agenda-archive
%		org-agenda-bulk-mark-regexp
*		org-agenda-bulk-mark-all
+		org-agenda-priority-up
,		org-agenda-priority
-		org-agenda-priority-down
.		org-agenda-goto-today
/		org-agenda-filter-by-tag
0 .. 9		digit-argument
:		org-agenda-set-tags
;		org-timer-set-timer
<		org-agenda-filter-by-category
=		org-agenda-filter-by-regexp
>		org-agenda-date-prompt
?		org-agenda-show-the-flagging-note
A		org-agenda-append-agenda
B		org-agenda-bulk-action
C		org-agenda-convert-date
D		org-agenda-toggle-diary
E		org-agenda-entry-text-mode
F		org-agenda-follow-mode
G		org-agenda-toggle-time-grid
H		org-agenda-holidays
I		org-agenda-clock-in
J		org-agenda-clock-goto
K		org-habit-toggle-habits
L		org-agenda-recenter
M		org-agenda-phases-of-moon
N		org-agenda-next-item
O		org-agenda-clock-out
P		org-agenda-previous-item
Q		org-agenda-Quit
R		org-agenda-clockreport-mode
S		org-agenda-sunrise-sunset
T		org-agenda-show-tags
U		org-agenda-bulk-unmark-all
X		org-agenda-clock-cancel
[		org-agenda-manipulate-query-add
\		org-agenda-filter-by-tag-refine
]		org-agenda-manipulate-query-subtract
^		org-agenda-filter-by-top-headline
a		org-agenda-archive-default-with-confirmation
b		org-agenda-earlier
c		org-agenda-goto-calendar
d		org-agenda-day-view
e		org-agenda-set-effort
f		org-agenda-later
g		??
h		org-agenda-holidays
i		org-agenda-diary-entry
j		org-agenda-goto-date
k		org-agenda-capture
l		org-agenda-log-mode
m		org-agenda-bulk-mark
n		org-agenda-next-line
o		delete-other-windows
p		org-agenda-previous-line
q		org-agenda-quit
r		org-agenda-redo
s		org-save-all-org-buffers
t		org-agenda-todo
u		org-agenda-bulk-unmark
v		org-agenda-view-mode-dispatch
w		org-agenda-week-view
x		org-agenda-exit
y		org-agenda-year-view
z		org-agenda-add-note
{		org-agenda-manipulate-query-add-re
|		org-agenda-filter-remove-all
}		org-agenda-manipulate-query-subtract-re
~		org-agenda-limit-interactively
DEL		org-agenda-show-scroll-down
C-/		org-agenda-undo
	org-agenda-todo-previousset
	org-agenda-todo-nextset
	org-agenda-drag-line-forward
		org-agenda-drag-line-backward
	org-agenda-priority-down
	org-agenda-do-date-earlier
	org-agenda-do-date-later
		org-agenda-priority-up
	org-agenda-show-scroll-down
		org-agenda-next-line
	org-agenda-goto-mouse
	org-agenda-show-mouse
		org-agenda-goto
		org-agenda-undo
		org-agenda-previous-line

M-*		org-agenda-bulk-toggle-all
M-m		org-agenda-bulk-toggle

C-c C-a		org-attach
C-c C-d		org-agenda-deadline
C-c C-n		org-agenda-next-date-line
C-c C-o		org-agenda-open-link
C-c C-p		org-agenda-previous-date-line
C-c C-q		org-agenda-set-tags
C-c C-s		org-agenda-schedule
C-c C-t		org-agenda-todo
C-c C-w		org-agenda-refile
C-c C-x		Prefix Command
C-c C-z		org-agenda-add-note
C-c $		org-agenda-archive
C-c ,		org-agenda-priority

C-x C-s		org-save-all-org-buffers
C-x C-w		org-agenda-write
C-x u		org-agenda-undo

C-c C-x C-a	org-agenda-archive-default
C-c C-x C-c	org-agenda-columns
C-c C-x C-e	org-clock-modify-effort-estimate
C-c C-x TAB	org-agenda-clock-in
C-c C-x C-j	org-clock-goto
C-c C-x RET	Prefix Command
C-c C-x C-o	org-agenda-clock-out
C-c C-x C-s	org-agenda-archive
C-c C-x C-x	org-agenda-clock-cancel
C-c C-x !	org-reload
C-c C-x >	org-agenda-remove-restriction-lock
C-c C-x A	org-agenda-archive-to-archive-sibling
C-c C-x a	org-agenda-toggle-archive-tag
C-c C-x b	org-agenda-tree-to-indirect-buffer
C-c C-x e	org-agenda-set-effort
C-c C-x p	org-agenda-set-property
C-c C-x 	org-agenda-priority-down
C-c C-x 	org-agenda-do-date-earlier
C-c C-x 			org-agenda-do-date-later
C-c C-x 			org-agenda-priority-up

C-c C-x RET g	org-mobile-pull
C-c C-x RET p	org-mobile-push


:PROPERTIES: :CUSTOM_ID: org-overview :END:

org-drag-line-forward (arg)

Switch to overview mode, showing only top-level headlines.
Really, this shows all headlines with level equal or greater than the level
of the first headline in the buffer.  This is important, because if the
first headline is not level one, then (hide-sublevels 1) gives confusing
results.

:PROPERTIES: :CUSTOM_ID: org-drag-line-forward :END:

org-babel-expand-src-block (&optional arg info params)

Drag the line at point ARG lines forward.

:PROPERTIES: :CUSTOM_ID: org-babel-expand-src-block :END:

org-bibtex-create-in-current-entry (&optional arg)

Expand the current source code block.
Expand according to the source code block's header
arguments and pop open the results in a preview buffer.

:PROPERTIES: :CUSTOM_ID: org-bibtex-create-in-current-entry :END:

org-html-htmlize-generate-css

Add bibliographical data to the current entry.
With a prefix arg, query for optional fields.

:PROPERTIES: :CUSTOM_ID: org-html-htmlize-generate-css :END:

org-end-of-line (&optional arg)

Create the CSS for all font definitions in the current Emacs session.
Use this to create face definitions in your CSS style file that can then
be used by code snippets transformed by htmlize.
This command just produces a buffer that contains class definitions for all
faces used in the current Emacs session.  You can copy and paste the ones you
need into your CSS file.

If you then set `org-html-htmlize-output-type' to `css', calls
to the function `org-html-htmlize-region-for-paste' will
produce code that uses these same face definitions.

:PROPERTIES: :CUSTOM_ID: org-end-of-line :END:

org-attach-attach-mv

Go to the end of the line.
If this is a headline, and `org-special-ctrl-a/e' is set, ignore
tags on the first attempt, and only move to after the tags when
the cursor is already beyond the end of the headline.

:PROPERTIES: :CUSTOM_ID: org-attach-attach-mv :END:

org-update-checkbox-count (&optional all)

Attach a file by moving (renaming) it.

:PROPERTIES: :CUSTOM_ID: org-update-checkbox-count :END:

org-set-effort (&optional value increment)

Update the checkbox statistics in the current section.
This will find all statistic cookies like [57%] and [6/12] and
update them with the current numbers.

With optional prefix argument ALL, do this for the whole buffer.

:PROPERTIES: :CUSTOM_ID: org-set-effort :END:

org-show-entry

Set the effort property of the current entry.
With numerical prefix arg, use the nth allowed value, 0 stands for the
10th allowed value.

When INCREMENT is non-nil, set the property to the next allowed value.

:PROPERTIES: :CUSTOM_ID: org-show-entry :END:

org-promote-subtree

Show the body directly following this heading.
Show the heading too, if it is currently invisible.

:PROPERTIES: :CUSTOM_ID: org-promote-subtree :END:

org-indent-item

Promote the entire subtree.
See also `org-promote'.

:PROPERTIES: :CUSTOM_ID: org-indent-item :END:

org-attach-open-in-emacs

Indent a local list item, but not its children.
If a region is active, all items inside will be moved.

:PROPERTIES: :CUSTOM_ID: org-attach-open-in-emacs :END:

org-table-move-column-right

Open attachment, force opening in Emacs.
See `org-attach-open'.

:PROPERTIES: :CUSTOM_ID: org-table-move-column-right :END:

org-emphasize (&optional char)

Move column to the right.

:PROPERTIES: :CUSTOM_ID: org-emphasize :END:

org-bibtex-import-from-file (file)

Insert or change an emphasis, i.e. a font like bold or italic.
If there is an active region, change that region to a new emphasis.
If there is no region, just insert the marker characters and position
the cursor between them.
CHAR should be the marker character.  If it is a space, it means to
remove the emphasis of the selected region.
If CHAR is not given (for example in an interactive call) it will be
prompted for.

:PROPERTIES: :CUSTOM_ID: org-bibtex-import-from-file :END:

org-speed-move-safe (cmd)

Read bibtex entries from FILE and insert as Org-mode headlines after point.

:PROPERTIES: :CUSTOM_ID: org-speed-move-safe :END:

org-export-insert-default-template (&optional backend subtreep)

Execute CMD, but make sure that the cursor always ends up in a headline.
If not, return to the original position and throw an error.

:PROPERTIES: :CUSTOM_ID: org-export-insert-default-template :END:

org-agenda-show-tags

Insert all export keywords with default values at beginning of line.

BACKEND is a symbol referring to the name of a registered export
back-end, for which specific export options should be added to
the template, or `default' for default template.  When it is nil,
the user will be prompted for a category.

If SUBTREEP is non-nil, export configuration will be set up
locally for the subtree through node properties.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-tags :END:

org-table-goto-column (n &optional on-delim force)

Show the tags applicable to the current item.

:PROPERTIES: :CUSTOM_ID: org-table-goto-column :END:

org-move-subtree-up (&optional arg)

Move the cursor to the Nth column in the current table line.
With optional argument ON-DELIM, stop with point before the left delimiter
of the field.
If there are less than N fields, just go to after the last delimiter.
However, when FORCE is non-nil, create new columns if necessary.

:PROPERTIES: :CUSTOM_ID: org-move-subtree-up :END:

org-timestamp-up-day (&optional arg)

Move the current subtree up past ARG headlines of the same level.

:PROPERTIES: :CUSTOM_ID: org-timestamp-up-day :END:

org-protocol-create-for-org

Increase the date in the time stamp by one day.
With prefix ARG, change that many days.

:PROPERTIES: :CUSTOM_ID: org-protocol-create-for-org :END:

org-priority-down

Create a org-protocol project for the current file's Org-mode project.
The visited file needs to be part of a publishing project in
`org-publish-project-alist' for this to work.  The function
delegates most of the work to `org-protocol-create'.

:PROPERTIES: :CUSTOM_ID: org-priority-down :END:

org-up-element

Decrease the priority of the current item.

:PROPERTIES: :CUSTOM_ID: org-up-element :END:

org-display-outline-path (&optional file current separator just-return-string)

Move to upper element.

:PROPERTIES: :CUSTOM_ID: org-display-outline-path :END:

org-columns-menu (event)

Display the current outline path in the echo area.

If FILE is non-nil, prepend the output with the file name.
If CURRENT is non-nil, append the current heading to the output.
SEPARATOR is passed through to `org-format-outline-path'.  It separates
the different parts of the path and defaults to "/".
If JUST-RETURN-STRING is non-nil, return a string, don't display a message.

:PROPERTIES: :CUSTOM_ID: org-columns-menu :END:

org-table-fedit-ref-left

Org Column Menu

:PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-left :END:

org-backward-heading-same-level (arg &optional invisible-ok)

Shift the reference at point one field to the left.

:PROPERTIES: :CUSTOM_ID: org-backward-heading-same-level :END:

org-table-import (file arg)

Move backward to the ARG'th subheading at same level as this one.
Stop at the first and last subheadings of a superior heading.

:PROPERTIES: :CUSTOM_ID: org-table-import :END:

org-force-self-insert (N)

Import FILE as a table.
The file is assumed to be tab-separated.  Such files can be produced by most
spreadsheet and database applications.  If no tabs (at least one per line)
are found, lines will be split on whitespace into fields.

:PROPERTIES: :CUSTOM_ID: org-force-self-insert :END:

org-toggle-item (arg)

Needed to enforce self-insert under remapping.

:PROPERTIES: :CUSTOM_ID: org-toggle-item :END:

org-shiftmetaup (&optional arg)

Convert headings or normal lines to items, items to normal lines.
If there is no active region, only the current line is considered.

If the first non blank line in the region is a headline, convert
all headlines to items, shifting text accordingly.

If it is an item, convert all items to normal lines.

If it is normal text, change region into a list of items.
With a prefix argument ARG, change the region in a single item.

:PROPERTIES: :CUSTOM_ID: org-shiftmetaup :END:

org-capture-import-remember-templates

Move subtree up or kill table row.
Calls `org-move-subtree-up' or `org-table-kill-row' or
`org-move-item-up' or `org-timestamp-up', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-capture-import-remember-templates :END:

org-agenda-holidays

Set `org-capture-templates' to be similar to `org-remember-templates'.

:PROPERTIES: :CUSTOM_ID: org-agenda-holidays :END:

org-agenda-todo-nextset

Display the holidays for the 3 months around the cursor date.

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-nextset :END:

orgtbl-ret

Switch TODO entry to next sequence.

:PROPERTIES: :CUSTOM_ID: orgtbl-ret :END:

org-toggle-tags-groups

Justification and field motion for `orgtbl-mode'.

:PROPERTIES: :CUSTOM_ID: org-toggle-tags-groups :END:

org-timer-set-timer (&optional opt)

Toggle support for group tags.
Support for group tags is controlled by the option
`org-group-tags', which is non-nil by default.

:PROPERTIES: :CUSTOM_ID: org-timer-set-timer :END:

org-indent-indent-buffer

Prompt for a duration and set a timer.

If `org-timer-default-timer' is not zero, suggest this value as
the default duration for the timer.  If a timer is already set,
prompt the user if she wants to replace it.

Called with a numeric prefix argument, use this numeric value as
the duration of the timer.

Called with a `C-u' prefix arguments, use `org-timer-default-timer'
without prompting the user for a duration.

With two `C-u' prefix arguments, use `org-timer-default-timer'
without prompting the user for a duration and automatically
replace any running timer.

:PROPERTIES: :CUSTOM_ID: org-indent-indent-buffer :END:

org-customize

Add indentation properties to the accessible part of the buffer.

:PROPERTIES: :CUSTOM_ID: org-customize :END:

org-agenda-year-view (&optional year)

Call the customize function with org as argument.

:PROPERTIES: :CUSTOM_ID: org-agenda-year-view :END:

org-attach-delete-one (&optional file)

Switch to yearly view for agenda.
With argument YEAR, switch to that year.
If MONTH has more then 2 digits, only the last two encode the
month.  Any digits before this encode a year.  So 200712 means
December year 2007.  Years in the range 1938-2037 can also be
written as 2-digit years.

:PROPERTIES: :CUSTOM_ID: org-attach-delete-one :END:

org-shifttab (&optional arg)

Delete a single attachment.

:PROPERTIES: :CUSTOM_ID: org-shifttab :END:

  • Access: <backtab>, <S-tab>, <S-iso-lefttab>, <menu-bar> <Tbl> <Previous Field>, <menu-bar> <Org> <Show/Hide> <Cycle Global Visibility>
  • In file: org.el
  • Find modifications in git logs

org-cdlatex-underscore-caret (&optional arg)

Global visibility cycling or move to previous table field.
Call `org-table-previous-field' within a table.
When ARG is nil, cycle globally through visibility states.
When ARG is a numeric prefix, show contents of this level.

:PROPERTIES: :CUSTOM_ID: org-cdlatex-underscore-caret :END:

org-table-wrap-region (arg)

Execute `cdlatex-sub-superscript' in LaTeX fragments.
Revert to the normal definition outside of these fragments.

:PROPERTIES: :CUSTOM_ID: org-table-wrap-region :END:

org-org-export-as-org (&optional async subtreep visible-only ext-plist)

Wrap several fields in a column like a paragraph.
This is useful if you'd like to spread the contents of a field over several
lines, in order to keep the table compact.

If there is an active region, and both point and mark are in the same column,
the text in the column is wrapped to minimum width for the given number of
lines.  Generally, this makes the table more compact.  A prefix ARG may be
used to change the number of desired lines.  For example, `C-2 M-x org-table-wrap'
formats the selected text to two lines.  If the region was longer than two
lines, the remaining lines remain empty.  A negative prefix argument reduces
the current number of lines by that amount.  The wrapped text is pasted back
into the table.  If you formatted it to more lines than it was before, fields
further down in the table get overwritten - so you might need to make space in
the table first.

If there is no region, the current field is split at the cursor position and
the text fragment to the right of the cursor is prepended to the field one
line down.

If there is no region, but you specify a prefix ARG, the current field gets
blank, and the content is appended to the field above.

:PROPERTIES: :CUSTOM_ID: org-org-export-as-org :END:

org-todo-list (&optional arg)

Export current buffer to an Org buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org ORG Export*", which will
be displayed when `org-export-show-temporary-export-buffer' is
non-nil.

:PROPERTIES: :CUSTOM_ID: org-todo-list :END:

org-agenda-diary-entry

Show all (not done) TODO entries from all agenda file in a single list.
The prefix arg can be used to select a specific TODO keyword and limit
the list to these.  When using C-u, you will be prompted
for a keyword.  A numeric prefix directly selects the Nth keyword in
`org-todo-keywords-1'.

:PROPERTIES: :CUSTOM_ID: org-agenda-diary-entry :END:

org-footnote-goto-previous-reference (label)

Make a diary entry, like the `i' command from the calendar.
All the standard commands work: block, weekly etc.
When `org-agenda-diary-file' points to a file,
`org-agenda-diary-entry-in-org-file' is called instead to create
entries in that Org-mode file.

:PROPERTIES: :CUSTOM_ID: org-footnote-goto-previous-reference :END:

org-mouse-show-overview

Find the first closest (to point) reference of footnote with label LABEL.

:PROPERTIES: :CUSTOM_ID: org-mouse-show-overview :END:

org-toggle-sticky-agenda (&optional arg)

Change visibility of current org buffer to first-level headlines only.

:PROPERTIES: :CUSTOM_ID: org-toggle-sticky-agenda :END:

org-delete-property-globally (property)

Toggle `org-agenda-sticky'.

:PROPERTIES: :CUSTOM_ID: org-delete-property-globally :END:

org-reveal (&optional siblings)

Remove PROPERTY globally, from all entries.

:PROPERTIES: :CUSTOM_ID: org-reveal :END:

org-attach-sync

Show current entry, hierarchy above it, and the following headline.
This can be used to show a consistent set of context around locations
exposed with `org-show-hierarchy-above' or `org-show-following-heading'
not t for the search context.

With optional argument SIBLINGS, on each level of the hierarchy all
siblings are shown.  This repairs the tree structure to what it would
look like when opened with hierarchical calls to `org-cycle'.
With double optional argument C-u C-u, go to the parent and show the
entire tree.

:PROPERTIES: :CUSTOM_ID: org-attach-sync :END:

org-agenda-priority-up

Synchronize the current tasks with its attachments.
This can be used after files have been added externally.

:PROPERTIES: :CUSTOM_ID: org-agenda-priority-up :END:

org-entities-create-table

Increase the priority of line at point, also in Org-mode file.

:PROPERTIES: :CUSTOM_ID: org-entities-create-table :END:

org-clock-goto (&optional select)

Create an Org mode table with all entities.

:PROPERTIES: :CUSTOM_ID: org-clock-goto :END:

org-agenda-show-the-flagging-note

Go to the currently clocked-in entry, or to the most recently clocked one.
With prefix arg SELECT, offer recently clocked tasks for selection.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-the-flagging-note :END:

org-table-move-column (&optional left)

Display the flagging note in the other window.
When called a second time in direct sequence, offer to remove the FLAGGING
tag and (if present) the flagging note.

:PROPERTIES: :CUSTOM_ID: org-table-move-column :END:

org-ascii-export-to-ascii (&optional async subtreep visible-only body-only ext-plist)

Move the current column to the right.  With arg LEFT, move to the left.

:PROPERTIES: :CUSTOM_ID: org-ascii-export-to-ascii :END:

org-table-next-field

Export current buffer to a text file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, strip title and
table of contents from output.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return output file's name.

:PROPERTIES: :CUSTOM_ID: org-table-next-field :END:

org-table-end-of-field (&optional n)

Go to the next field in the current table, creating new lines as needed.
Before doing so, re-align the table if necessary.

:PROPERTIES: :CUSTOM_ID: org-table-end-of-field :END:

org-table-paste-rectangle

Move to the beginning of the current table field.
If already at or before the beginning, move to the beginning of the
previous field.
With numeric argument N, move N-1 fields backward first.

:PROPERTIES: :CUSTOM_ID: org-table-paste-rectangle :END:

org-columns-widen (arg)

Paste a rectangular region into a table.
The upper right corner ends up in the current field.  All involved fields
will be overwritten.  If the rectangle does not fit into the present table,
the table is enlarged as needed.  The process ignores horizontal separator
lines.

:PROPERTIES: :CUSTOM_ID: org-columns-widen :END:

org-babel-demarcate-block (&optional arg)

Make the column wider by ARG characters.

:PROPERTIES: :CUSTOM_ID: org-babel-demarcate-block :END:

org-edit-src-continue (e)

Wrap or split the code in the region or on the point.
When called from inside of a code block the current block is
split.  When called from outside of a code block a new code block
is created.  In both cases if the region is demarcated and if the
region is not active then the point is demarcated.

:PROPERTIES: :CUSTOM_ID: org-edit-src-continue :END:

org-forward-element

Continue editing source blocks.

:PROPERTIES: :CUSTOM_ID: org-forward-element :END:

org-set-tags (&optional arg just-align)

Move forward by one element.
Move to the next element at the same level, when possible.

:PROPERTIES: :CUSTOM_ID: org-set-tags :END:

org-edit-src-code (&optional context code edit-buffer-name)

Set the tags for the current headline.
With prefix ARG, realign all tags in headings in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-edit-src-code :END:

org-babel-execute-buffer (&optional arg)

Edit the source CODE block at point.
The code is copied to a separate buffer and the appropriate mode
is turned on.  When done, exit with M-x org-edit-src-exit.  This will
remove the original code in the Org buffer, and replace it with the
edited version.  An optional argument CONTEXT is used by M-x org-edit-src-save
when calling this function.  See `org-src-window-setup' to configure
the display of windows containing the Org buffer and the code buffer.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-buffer :END:

org-ascii-export-as-ascii (&optional async subtreep visible-only body-only ext-plist)

Execute source code blocks in a buffer.
Call `org-babel-execute-src-block' on every source block in
the current buffer.

:PROPERTIES: :CUSTOM_ID: org-ascii-export-as-ascii :END:

org-icalendar-export-to-ics (&optional async subtreep visible-only body-only)

Export current buffer to a text buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, strip title and
table of contents from output.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org ASCII Export*", which
will be displayed when `org-export-show-temporary-export-buffer'
is non-nil.

:PROPERTIES: :CUSTOM_ID: org-icalendar-export-to-ics :END:

org-edit-src-exit (&optional context)

Export current buffer to an iCalendar file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "BEGIN:VCALENDAR" and "END:VCALENDAR".

Return ICS file name.

:PROPERTIES: :CUSTOM_ID: org-edit-src-exit :END:

org-agenda-filter-by-regexp (strip)

Exit special edit and protect problematic lines.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-regexp :END:

org-capture-goto-target (&optional template-key)

Filter agenda entries by a regular expression.
Regexp filters are cumulative.
With no prefix argument, keep entries matching the regexp.
With one prefix argument, filter out entries matching the regexp.
With two prefix arguments, remove the regexp filters.

:PROPERTIES: :CUSTOM_ID: org-capture-goto-target :END:

orgtbl-self-insert-command (N)

Go to the target location of a capture template.
The user is queried for the template.

:PROPERTIES: :CUSTOM_ID: orgtbl-self-insert-command :END:

org-babel-lob-execute-maybe

Like `self-insert-command', use overwrite-mode for whitespace in tables.
If the cursor is in a table looking at whitespace, the whitespace is
overwritten, and the table is not marked as requiring realignment.

:PROPERTIES: :CUSTOM_ID: org-babel-lob-execute-maybe :END:

org-agenda-log-mode (&optional special)

Execute a Library of Babel source block, if appropriate.
Detect if this is context for a Library Of Babel source block and
if so then run the appropriate source block from the Library.

:PROPERTIES: :CUSTOM_ID: org-agenda-log-mode :END:

org-agenda-show-clocking-issues

Toggle log mode in an agenda buffer.
With argument SPECIAL, show all possible log items, not only the ones
configured in `org-agenda-log-mode-items'.
With a double `C-u' prefix arg, show *only* log items, nothing else.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-clocking-issues :END:

org-src-mode (&optional arg)

Add overlays, showing issues with clocking.
See also the user option `org-agenda-clock-consistency-checks'.

:PROPERTIES: :CUSTOM_ID: org-src-mode :END:

org-timestamp-down-day (&optional arg)

Minor mode for language major mode buffers generated by org.
This minor mode is turned on in two situations:
- when editing a source code snippet with "C-c '".
- When formatting a source code snippet for export with htmlize.
There is a mode hook, and keybindings for `org-edit-src-exit' and
`org-edit-src-save'

:PROPERTIES: :CUSTOM_ID: org-timestamp-down-day :END:

org-archive-subtree-default-with-confirmation

Decrease the date in the time stamp by one day.
With prefix ARG, change that many days.

:PROPERTIES: :CUSTOM_ID: org-archive-subtree-default-with-confirmation :END:

org-tree-to-indirect-buffer (&optional arg)

Archive the current subtree with the default command.
This command is set with the variable `org-archive-default-command'.

:PROPERTIES: :CUSTOM_ID: org-tree-to-indirect-buffer :END:

org-cdlatex-math-modify (&optional arg)

Create indirect buffer and narrow it to current subtree.
With a numerical prefix ARG, go up to this level and then take that tree.
If ARG is negative, go up that many levels.

If `org-indirect-buffer-display' is not `new-frame', the command removes the
indirect buffer previously made with this command, to avoid proliferation of
indirect buffers.  However, when you call the command with a C-u prefix, or
when `org-indirect-buffer-display' is `new-frame', the last buffer
is kept so that you can work with several indirect buffers at the same time.
If `org-indirect-buffer-display' is `dedicated-frame', the C-u prefix also
requests that a new frame be made for the new buffer, so that the dedicated
frame is not changed.

:PROPERTIES: :CUSTOM_ID: org-cdlatex-math-modify :END:

org-insert-subheading (arg)

Execute `cdlatex-math-modify' in LaTeX fragments.
Revert to the normal definition outside of these fragments.

:PROPERTIES: :CUSTOM_ID: org-insert-subheading :END:

org-table-overlay-coordinates

Insert a new subheading and demote it.
Works for outline headings and for plain lists alike.

:PROPERTIES: :CUSTOM_ID: org-table-overlay-coordinates :END:

org-agenda-cycle-show (&optional n)

Add overlays to the table at point, to show row/column coordinates.

:PROPERTIES: :CUSTOM_ID: org-agenda-cycle-show :END:

org-drag-element-forward

Show the current entry in another window, with default settings.
Default settings are taken from `org-show-hierarchy-above' and siblings.
When use repeatedly in immediate succession, the remote entry will cycle
through visibility

children -> subtree -> folded

When called with a numeric prefix arg, that arg will be passed through to
`org-agenda-show-1'.  For the interpretation of that argument, see the
docstring of `org-agenda-show-1'.

:PROPERTIES: :CUSTOM_ID: org-drag-element-forward :END:

org-move-item-down

Move forward element at point.

:PROPERTIES: :CUSTOM_ID: org-move-item-down :END:

org-agenda-prepare-buffers (files)

Move the item at point down, i.e. swap with following item.
Sub-items (items with larger indentation) are considered part of
the item, so this really moves item trees.

:PROPERTIES: :CUSTOM_ID: org-agenda-prepare-buffers :END:

org-export-as-taskjuggler-and-open

Create buffers for all agenda files, protect archived trees and comments.

:PROPERTIES: :CUSTOM_ID: org-export-as-taskjuggler-and-open :END:

org-backward-element

Export the current buffer as a TaskJuggler file and open it
with the TaskJuggler GUI.

:PROPERTIES: :CUSTOM_ID: org-backward-element :END:

org-export-stack-mode

Move backward by one element.
Move to the previous element at the same level, when possible.

:PROPERTIES: :CUSTOM_ID: org-export-stack-mode :END:

org-footnote-action (&optional special)

Mode for displaying asynchronous export stack.

Type M-x org-export-stack to visualize the asynchronous export
stack.

In an Org Export Stack buffer, use RET to view export output
on current line, d to remove it from the stack and C to clear
stack completely.

Removing entries in an Org Export Stack buffer doesn't affect
files or buffers, only the display.

key             binding
---             -------

RET		org-export-stack-view
C-n		next-line
C-p		previous-line
SPC		next-line
C		org-export-stack-clear
d		org-export-stack-remove
n		next-line
p		previous-line
v		org-export-stack-view
DEL		previous-line
		next-line
		previous-line



In addition to any hooks its parent mode `special-mode' might have run,
this mode runs the hook `org-export-stack-mode-hook', as the final step
during initialization.

:PROPERTIES: :CUSTOM_ID: org-footnote-action :END:

org-export-stack-remove (&optional source)

Do the right thing for footnotes.

When at a footnote reference, jump to the definition.

When at a definition, jump to the references if they exist, offer
to create them otherwise.

When neither at definition or reference, create a new footnote,
interactively.

With prefix arg SPECIAL, offer additional commands in a menu.

:PROPERTIES: :CUSTOM_ID: org-export-stack-remove :END:

org-export-stack

Remove export results at point from stack.
If optional argument SOURCE is non-nil, remove it instead.

:PROPERTIES: :CUSTOM_ID: org-export-stack :END:

org-agenda-filter-by-top-headline (strip)

Menu for asynchronous export results and running processes.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-top-headline :END:

org-agenda-write (file &optional open nosettings agenda-bufname)

Keep only those lines that are descendants from the same top headline.
The top headline is that of the current line.

:PROPERTIES: :CUSTOM_ID: org-agenda-write :END:

org-agenda-follow-mode

Write the current buffer (an agenda view) as a file.
Depending on the extension of the file name, plain text (.txt),
HTML (.html or .htm), PDF (.pdf) or Postscript (.ps) is produced.
If the extension is .ics, run icalendar export over all files used
to construct the agenda and limit the export to entries listed in the
agenda now.
If the extension is .org, collect all subtrees corresponding to the
agenda entries and add them in an .org file.
With prefix argument OPEN, open the new file immediately.
If NOSETTINGS is given, do not scope the settings of
`org-agenda-exporter-settings' into the export commands.  This is used when
the settings have already been scoped and we do not wish to overrule other,
higher priority settings.
If AGENDA-BUFFER-NAME, use this as the buffer name for the agenda to write.

:PROPERTIES: :CUSTOM_ID: org-agenda-follow-mode :END:

orgtbl-create-or-convert-from-region (arg)

Toggle follow mode in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: orgtbl-create-or-convert-from-region :END:

org-shiftmetaright

Create table or convert region to table, if no conflicting binding.
This installs the table binding `C-c |', but only if there is no
conflicting binding to this key outside orgtbl-mode.

:PROPERTIES: :CUSTOM_ID: org-shiftmetaright :END:

org-babel-expand-src-block-maybe

Demote subtree or insert table column.
Calls `org-demote-subtree', `org-indent-item-tree', or
`org-table-insert-column', depending on context.  See the
individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-babel-expand-src-block-maybe :END:

org-babel-execute-src-block-maybe

Conditionally expand a source block.
Detect if this is context for a org-babel src-block and if so
then run `org-babel-expand-src-block'.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-src-block-maybe :END:

org-setup-comments-handling

Conditionally execute a source block.
Detect if this is context for a Babel src-block and if so
then run `org-babel-execute-src-block'.

:PROPERTIES: :CUSTOM_ID: org-setup-comments-handling :END:

org-occur (regexp &optional keep-previous callback)

:PROPERTIES: :CUSTOM_ID: org-occur :END:

org-archive-to-archive-sibling

Make a compact tree which shows all matches of REGEXP.
The tree will show the lines where the regexp matches, and all higher
headlines above the match.  It will also show the heading after the match,
to make sure editing the matching entry is easy.
If KEEP-PREVIOUS is non-nil, highlighting and exposing done by a previous
call to `org-occur' will be kept, to allow stacking of calls to this
command.
If CALLBACK is non-nil, it is a function which is called to confirm
that the match should indeed be shown.

:PROPERTIES: :CUSTOM_ID: org-archive-to-archive-sibling :END:

org-kill-line (&optional arg)

Archive the current heading by moving it under the archive sibling.
The archive sibling is a sibling of the heading with the heading name
`org-archive-sibling-heading' and an `org-archive-tag' tag.  If this
sibling does not exist, it will be created at the end of the subtree.

:PROPERTIES: :CUSTOM_ID: org-kill-line :END:

org-attach-attach (file &optional visit-dir method)

Kill line, to tags or end of line.

:PROPERTIES: :CUSTOM_ID: org-attach-attach :END:

org-store-agenda-views (&rest parameters)

Move/copy/link FILE into the attachment directory of the current task.
If VISIT-DIR is non-nil, visit the directory with dired.
METHOD may be `cp', `mv', `ln', or `lns' default taken from
`org-attach-method'.

:PROPERTIES: :CUSTOM_ID: org-store-agenda-views :END:

org-mark-ring-push (&optional pos buffer)

Store agenda views.

:PROPERTIES: :CUSTOM_ID: org-mark-ring-push :END:

org-transpose-element

Put the current position or POS into the mark ring and rotate it.

:PROPERTIES: :CUSTOM_ID: org-transpose-element :END:

org-table-edit-field (arg)

Transpose current and previous elements, keeping blank lines between.
Point is moved after both elements.

:PROPERTIES: :CUSTOM_ID: org-table-edit-field :END:

org-hide-block-toggle-maybe

Edit table field in a different window.
This is mainly useful for fields that contain hidden parts.
When called with a C-u prefix, just make the full field visible so that
it can be edited in place.

:PROPERTIES: :CUSTOM_ID: org-hide-block-toggle-maybe :END:

org-columns-edit-value (&optional key)

Toggle visibility of block at point.

:PROPERTIES: :CUSTOM_ID: org-columns-edit-value :END:

org-babel-check-src-block

Edit the value of the property at point in column view.
Where possible, use the standard interface for changing this line.

:PROPERTIES: :CUSTOM_ID: org-babel-check-src-block :END:

org-reset-checkbox-state-subtree

Check for misspelled header arguments in the current code block.

:PROPERTIES: :CUSTOM_ID: org-reset-checkbox-state-subtree :END:

org-table-cut-region (beg end)

Reset all checkboxes in an entry subtree.

:PROPERTIES: :CUSTOM_ID: org-table-cut-region :END:

org-replace-region-by-html (beg end)

Copy region in table to the clipboard and blank all relevant fields.
If there is no active region, use just the field at point.

:PROPERTIES: :CUSTOM_ID: org-replace-region-by-html :END:

org-agenda-capture (&optional with-time)

Assume the current region has org-mode syntax, and convert it to HTML.
This can be used in any buffer.  For example, you could write an
itemized list in org-mode syntax in an HTML buffer and then use this
command to convert it.

:PROPERTIES: :CUSTOM_ID: org-agenda-capture :END:

org-columns-move-right

Call `org-capture' with the date at point.
With a `C-1' prefix, use the HH:MM value at point (if any) or the
current HH:MM time.

:PROPERTIES: :CUSTOM_ID: org-columns-move-right :END:

org-agenda-toggle-diary

Swap this column with the one to the right.

:PROPERTIES: :CUSTOM_ID: org-agenda-toggle-diary :END:

org-time-stamp-inactive (&optional arg)

Toggle diary inclusion in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-time-stamp-inactive :END:

org-check-before-date (date)

Insert an inactive time stamp.
An inactive time stamp is enclosed in square brackets instead of angle
brackets.  It is inactive in the sense that it does not trigger agenda entries,
does not link to the calendar and cannot be changed with the S-cursor keys.
So these are more for recording a certain time/date.

:PROPERTIES: :CUSTOM_ID: org-check-before-date :END:

org-agenda-Quit

Check if there are deadlines or scheduled entries before DATE.

:PROPERTIES: :CUSTOM_ID: org-agenda-Quit :END:

org-compute-property-at-point

Exit the agenda and kill buffers loaded by `org-agenda'.
Also restore the window configuration.

:PROPERTIES: :CUSTOM_ID: org-compute-property-at-point :END:

org-timer-pause-or-continue (&optional stop)

Compute the property at point.
This looks for an enclosing column format, extracts the operator and
then applies it to the property in the column format's scope.

:PROPERTIES: :CUSTOM_ID: org-timer-pause-or-continue :END:

org-babel-examplize-region (beg end &optional results-switches)

Pause or continue the relative timer.
With prefix arg STOP, stop it entirely.

:PROPERTIES: :CUSTOM_ID: org-babel-examplize-region :END:

org-bibtex-read-file (file)

Comment out region using the inline '==' or ': ' org example quote.

:PROPERTIES: :CUSTOM_ID: org-bibtex-read-file :END:

org-columns-delete

Read FILE with `org-bibtex-read-buffer'.

:PROPERTIES: :CUSTOM_ID: org-columns-delete :END:

org-sparse-tree (&optional arg type)

Delete the column at point from columns view.

:PROPERTIES: :CUSTOM_ID: org-sparse-tree :END:

org-content (&optional arg)

Create a sparse tree, prompt for the details.
This command can create sparse trees.  You first need to select the type
of match used to create the tree:

t      Show all TODO entries.
T      Show entries with a specific TODO keyword.
m      Show entries selected by a tags/property match.
p      Enter a property name and its value (both with completion on existing
       names/values) and show entries with that property.
r      Show entries matching a regular expression (`/' can be used as well).
b      Show deadlines and scheduled items before a date.
a      Show deadlines and scheduled items after a date.
d      Show deadlines due within `org-deadline-warning-days'.
D      Show deadlines and scheduled items between a date range.

:PROPERTIES: :CUSTOM_ID: org-content :END:

org-insert-columns-dblock

Show all headlines in the buffer, like a table of contents.
With numerical argument N, show content up to level N.

:PROPERTIES: :CUSTOM_ID: org-insert-columns-dblock :END:

org-tbl-menu (event)

Create a dynamic block capturing a column view table.

:PROPERTIES: :CUSTOM_ID: org-tbl-menu :END:

org-agenda-reset-view

Tbl menu

:PROPERTIES: :CUSTOM_ID: org-agenda-reset-view :END:

org-update-statistics-cookies (all)

Switch to default view for agenda.

:PROPERTIES: :CUSTOM_ID: org-update-statistics-cookies :END:

org-agenda-priority (&optional force-direction)

Update the statistics cookie, either from TODO or from checkboxes.
This should be called with the cursor in a line with a statistics cookie.

:PROPERTIES: :CUSTOM_ID: org-agenda-priority :END:

org-next-item

Set the priority of line at point, also in Org-mode file.
This changes the line at point, all other lines in the agenda referring to
the same tree node, and the headline of the tree node in the Org-mode file.
Called with a universal prefix arg, show the priority instead of setting it.

:PROPERTIES: :CUSTOM_ID: org-next-item :END:

org-yank (&optional arg)

Move to the beginning of the next item.
Throw an error when not in a list.  Also throw an error when at
last item, unless `org-list-use-circular-motion' is non-nil.

:PROPERTIES: :CUSTOM_ID: org-yank :END:

org-agenda-kill-all-agenda-buffers

Yank.  If the kill is a subtree, treat it specially.
This command will look at the current kill and check if is a single
subtree, or a series of subtrees[1].  If it passes the test, and if the
cursor is at the beginning of a line or after the stars of a currently
empty headline, then the yank is handled specially.  How exactly depends
on the value of the following variables, both set by default.

org-yank-folded-subtrees
    When set, the subtree(s) will be folded after insertion, but only
    if doing so would now swallow text after the yanked text.

org-yank-adjusted-subtrees
    When set, the subtree will be promoted or demoted in order to
    fit into the local outline tree structure, which means that the level
    will be adjusted so that it becomes the smaller one of the two
    *visible* surrounding headings.

Any prefix to this command will cause `yank' to be called directly with
no special treatment.  In particular, a simple C-u prefix will just
plainly yank the text as it is.

[1] The test checks if the first non-white line is a heading
    and if there are no other headings with fewer stars.

:PROPERTIES: :CUSTOM_ID: org-agenda-kill-all-agenda-buffers :END:

org-agenda-show (&optional full-entry)

Kill all buffers in `org-agenda-mode'.
This is used when toggling sticky agendas.
You can also explicitly invoke it with `C-c a C-k'.

:PROPERTIES: :CUSTOM_ID: org-agenda-show :END:

org-archive-subtree (&optional find-done)

Display the Org-mode file which contains the item at point.
With prefix argument FULL-ENTRY, make the entire entry visible
if it was hidden in the outline.

:PROPERTIES: :CUSTOM_ID: org-archive-subtree :END:

org-add-note

Move the current subtree to the archive.
The archive can be a certain top-level heading in the current file, or in
a different file.  The tree will be moved to that location, the subtree
heading be marked DONE, and the current time will be added.

When called with prefix argument FIND-DONE, find whole trees without any
open TODO items and archive them (after getting confirmation from the user).
If the cursor is not at a headline when this command is called, try all level
1 trees.  If the cursor is on a headline, only try the direct children of
this heading.

:PROPERTIES: :CUSTOM_ID: org-add-note :END:

org-table-move-row-up

Add a note to the current entry.
This is done in the same way as adding a state change note.

:PROPERTIES: :CUSTOM_ID: org-table-move-row-up :END:

org-at-timestamp-p (&optional inactive-ok)

Move table row up.

:PROPERTIES: :CUSTOM_ID: org-at-timestamp-p :END:

org-agenda-convert-date

Determine if the cursor is in or at a timestamp.

:PROPERTIES: :CUSTOM_ID: org-agenda-convert-date :END:

org-cycle (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-cycle :END:

org-bibtex-write

TAB-action and visibility cycling for Org-mode.

This is the command invoked in Org-mode by the TAB key.  Its main purpose
is outline visibility cycling, but it also invokes other actions
in special contexts.

- When this function is called with a prefix argument, rotate the entire
  buffer through 3 states (global cycling)
  1. OVERVIEW: Show only top-level headlines.
  2. CONTENTS: Show all headlines of all levels, but no body text.
  3. SHOW ALL: Show everything.
  When called with two `C-u C-u' prefixes, switch to the startup visibility,
  determined by the variable `org-startup-folded', and by any VISIBILITY
  properties in the buffer.
  When called with three `C-u C-u C-u' prefixed, show the entire buffer,
  including any drawers.

- When inside a table, re-align the table and move to the next field.

- When point is at the beginning of a headline, rotate the subtree started
  by this line through 3 different states (local cycling)
  1. FOLDED:   Only the main headline is shown.
  2. CHILDREN: The main headline and the direct children are shown.
               From this state, you can move to one of the children
               and zoom in further.
  3. SUBTREE:  Show the entire subtree, including body text.
  If there is no subtree, switch directly from CHILDREN to FOLDED.

- When point is at the beginning of an empty headline and the variable
  `org-cycle-level-after-item/entry-creation' is set, cycle the level
  of the headline by demoting and promoting it to likely levels.  This
  speeds up creation document structure by pressing TAB once or several
  times right after creating a new headline.

- When there is a numeric prefix, go up to a heading with level ARG, do
  a `show-subtree' and return to the previous cursor position.  If ARG
  is negative, go up that many levels.

- When point is not at the beginning of a headline, execute the global
  binding for TAB, which is re-indenting the line.  See the option
  `org-cycle-emulate-tab' for details.

- Special case: if point is at the beginning of the buffer and there is
  no headline in line 1, this function will act as if called with prefix arg
  (C-u TAB, same as S-TAB) also when called without prefix arg.
  But only if also the variable `org-cycle-global-at-bob' is t.

:PROPERTIES: :CUSTOM_ID: org-bibtex-write :END:

org-capture (&optional goto keys)

Insert a heading built from the first element of `org-bibtex-entries'.

:PROPERTIES: :CUSTOM_ID: org-capture :END:

org-table-fedit-ref-down

Capture something.

This will let you select a template from `org-capture-templates', and then
file the newly captured information.  The text is immediately inserted
at the target location, and an indirect buffer is shown where you can
edit it.  Pressing C-c C-c brings you back to the previous state
of Emacs, so that you can continue your work.

When called interactively with a C-u prefix argument GOTO, don't capture
anything, just go to the file/headline where the selected template
stores its notes.  With a double prefix argument C-u C-u, go to the last note
stored.

When called with a `C-0' (zero) prefix, insert a template at point.

ELisp programs can set KEYS to a string associated with a template
in `org-capture-templates'.  In this case, interactive selection
will be bypassed.

If `org-capture-use-agenda-date' is non-nil, capturing from the
agenda will use the date at point as the default date.  Then, a
`C-1' prefix will tell the capture process to use the HH:MM time
of the day at point (if any) or the current HH:MM time.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-down :END:

org-columns-remove-overlays

Shift the reference at point one row/hline down.

:PROPERTIES: :CUSTOM_ID: org-columns-remove-overlays :END:

org-agenda-goto-date (span)

Remove all currently active column overlays.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-date :END:

org-table-create-with-table.el

Jump to DATE in agenda.

:PROPERTIES: :CUSTOM_ID: org-table-create-with-table.el :END:

org-beamer-export-to-latex (&optional async subtreep visible-only body-only ext-plist)

Use the table.el package to insert a new table.
If there is already a table at point, convert between Org-mode tables
and table.el tables.

:PROPERTIES: :CUSTOM_ID: org-beamer-export-to-latex :END:

org-agenda-bulk-remove-overlays (&optional beg end)

Export current buffer as a Beamer presentation (tex).

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return output file's name.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-remove-overlays :END:

org-babel-execute-src-block (&optional arg info params)

Remove the mark overlays between BEG and END in the agenda buffer.
BEG and END default to the buffer limits.

This only removes the overlays, it does not remove the markers
from the list in `org-agenda-bulk-marked-entries'.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-src-block :END:

org-deadline (arg &optional time)

Execute the current source code block.
Insert the results of execution into the buffer.  Source code
execution and the collection and formatting of results can be
controlled through a variety of header arguments.

With prefix argument ARG, force re-execution even if an existing
result cached in the buffer would otherwise have been returned.

Optionally supply a value for INFO in the form returned by
`org-babel-get-src-block-info'.

Optionally supply a value for PARAMS which will be merged with
the header arguments specified at the front of the source code
block.

:PROPERTIES: :CUSTOM_ID: org-deadline :END:

org-id-goto (id)

Insert the "DEADLINE:" string with a timestamp to make a deadline.
With one universal prefix argument, remove any deadline from the item.
With two universal prefix arguments, prompt for a warning delay.
With argument TIME, set the deadline at the corresponding date.  TIME
can either be an Org date like "2011-07-24" or a delta like "+2d".

:PROPERTIES: :CUSTOM_ID: org-id-goto :END:

org-export-as-taskjuggler

Switch to the buffer containing the entry with id ID.
Move the cursor to that entry in that buffer.

:PROPERTIES: :CUSTOM_ID: org-export-as-taskjuggler :END:

org-agenda-show-mouse (ev)

Export parts of the current buffer as a TaskJuggler file.
The exporter looks for a tree with tag, property or todo that
matches `org-export-taskjuggler-project-tag' and takes this as
the tasks for this project.  The first node of this tree defines
the project properties such as project name and project period.
If there is a tree with tag, property or todo that matches
`org-export-taskjuggler-resource-tag' this three is taken as
resources for the project.  If no resources are specified, a
default resource is created and allocated to the project.  Also
the taskjuggler project will be created with default reports as
defined in `org-export-taskjuggler-default-reports'.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-mouse :END:

org-bibtex-yank

Display the Org-mode file which contains the item at the mouse click.

:PROPERTIES: :CUSTOM_ID: org-bibtex-yank :END:

org-mouse-down-mouse (event)

If kill ring holds a bibtex entry yank it as an Org-mode headline.

:PROPERTIES: :CUSTOM_ID: org-mouse-down-mouse :END:

org-edit-fixed-width-region

:PROPERTIES: :CUSTOM_ID: org-edit-fixed-width-region :END:

org-babel-do-key-sequence-in-edit-buffer (key)

Edit the fixed-width ascii drawing at point.
This must be a region where each line starts with a colon followed by
a space character.
An new buffer is created and the fixed-width region is copied into it,
and the buffer is switched into `artist-mode' for editing.  When done,
exit with M-x org-edit-src-exit.  The edited text will then replace
the fragment in the Org-mode buffer.

:PROPERTIES: :CUSTOM_ID: org-babel-do-key-sequence-in-edit-buffer :END:

org-src-do-key-sequence-at-code-block (&optional key)

Read key sequence and execute the command in edit buffer.
Enter a key sequence to be executed in the language major-mode
edit buffer.  For example, TAB will alter the contents of the
Org-mode code block according to the effect of TAB in the
language major-mode buffer.  For languages that support
interactive sessions, this can be used to send code from the Org
buffer to the session for evaluation using the native major-mode
evaluation mechanisms.

:PROPERTIES: :CUSTOM_ID: org-src-do-key-sequence-at-code-block :END:

org-insert-todo-heading-respect-content (&optional force-state)

Execute key sequence at code block in the source Org buffer.
The command bound to KEY in the Org-babel key map is executed
remotely with point temporarily at the start of the code block in
the Org buffer.

This command is not bound to a key by default, to avoid conflicts
with language major mode bindings.  To bind it to C-c @ in all
language major modes, you could use

  (add-hook 'org-src-mode-hook
            (lambda () (define-key org-src-mode-map "\C-c@"
                    'org-src-do-key-sequence-at-code-block)))

In that case, for example, C-c @ t issued in code edit buffers
would tangle the current Org code block, C-c @ e would execute
the block and C-c @ h would display the other available
Org-babel commands.

:PROPERTIES: :CUSTOM_ID: org-insert-todo-heading-respect-content :END:

org-insert-drawer (&optional arg drawer)

Insert TODO heading with `org-insert-heading-respect-content' set to t.

:PROPERTIES: :CUSTOM_ID: org-insert-drawer :END:

org-agenda-schedule (arg &optional time)

Insert a drawer at point.

Optional argument DRAWER, when non-nil, is a string representing
drawer's name.  Otherwise, the user is prompted for a name.

If a region is active, insert the drawer around that region
instead.

Point is left between drawer's boundaries.

:PROPERTIES: :CUSTOM_ID: org-agenda-schedule :END:

org-property-next-allowed-value (&optional previous)

Schedule the item at point.
ARG is passed through to `org-schedule'.

:PROPERTIES: :CUSTOM_ID: org-property-next-allowed-value :END:

org-beginning-of-line (&optional arg)

Switch to the next allowed value for this property.

:PROPERTIES: :CUSTOM_ID: org-beginning-of-line :END:

org-attach

Go to the beginning of the current line.  If that is invisible, continue
to a visible line beginning.  This makes the function of C-a more intuitive.
If this is a headline, and `org-special-ctrl-a/e' is set, ignore tags on the
first attempt, and only move to after the tags when the cursor is already
beyond the end of the headline.

:PROPERTIES: :CUSTOM_ID: org-attach :END:

org-agenda-bulk-unmark-all

The dispatcher for attachment commands.
Shows a list of commands and prompts for another key to execute a command.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-unmark-all :END:

org-shiftmetaleft

Remove all marks in the agenda buffer.
This will remove the markers and the overlays.

:PROPERTIES: :CUSTOM_ID: org-shiftmetaleft :END:

org-paste-special (arg)

Promote subtree or delete table column.
Calls `org-promote-subtree', `org-outdent-item-tree', or
`org-table-delete-column', depending on context.  See the
individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-paste-special :END:

org-self-insert-command (N)

Paste rectangular region into table, or past subtree relative to level.
Calls `org-table-paste-rectangle' or `org-paste-subtree', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-self-insert-command :END:

org-encrypt-entry

Like `self-insert-command', use overwrite-mode for whitespace in tables.
If the cursor is in a table looking at whitespace, the whitespace is
overwritten, and the table is not marked as requiring realignment.

:PROPERTIES: :CUSTOM_ID: org-encrypt-entry :END:

org-table-fedit-scroll-down (N)

Encrypt the content of the current headline.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-scroll-down :END:

org-table-get-stored-formulas (&optional noerror)

:PROPERTIES: :CUSTOM_ID: org-table-get-stored-formulas :END:

org-feed-update (feed &optional retrieve-only)

Return an alist with the stored formulas directly after current table.

:PROPERTIES: :CUSTOM_ID: org-feed-update :END:

org-beamer-export-as-latex (&optional async subtreep visible-only body-only ext-plist)

Get inbox items from FEED.
FEED can be a string with an association in `org-feed-alist', or
it can be a list structured like an entry in `org-feed-alist'.

:PROPERTIES: :CUSTOM_ID: org-beamer-export-as-latex :END:

org-copy-visible (beg end)

Export current buffer as a Beamer buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org BEAMER Export*", which
will be displayed when `org-export-show-temporary-export-buffer'
is non-nil.

:PROPERTIES: :CUSTOM_ID: org-copy-visible :END:

org-cut-special

Copy the visible parts of the region.

:PROPERTIES: :CUSTOM_ID: org-cut-special :END:

org-drag-line-backward (arg)

Cut region in table or cut current subtree.
Calls `org-table-copy' or `org-cut-subtree', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-drag-line-backward :END:

org-icalendar-combine-agenda-files (&optional async)

Drag the line at point ARG lines backward.

:PROPERTIES: :CUSTOM_ID: org-icalendar-combine-agenda-files :END:

org-table-iterate (&optional arg)

Combine all agenda files into a single iCalendar file.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

The file is stored under the name chosen in
`org-icalendar-combined-agenda-file'.

:PROPERTIES: :CUSTOM_ID: org-table-iterate :END:

org-shiftcontrolleft

Recalculate the table until it does not change anymore.
The maximum number of iterations is 10, but you can choose a different value
with the prefix ARG.

:PROPERTIES: :CUSTOM_ID: org-shiftcontrolleft :END:

org-revert-all-org-buffers

Switch to previous TODO set.

:PROPERTIES: :CUSTOM_ID: org-revert-all-org-buffers :END:

org-babel-result-hide-all

Revert all Org-mode buffers.
Prompt for confirmation when there are unsaved changes.
Be sure you know what you are doing before letting this function
overwrite your changes.

This function is useful in a setup where one tracks org files
with a version control system, to revert on one machine after pulling
changes from another.  I believe the procedure must be like this:

1. M-x org-save-all-org-buffers
2. Pull changes from the other machine, resolve conflicts
3. M-x org-revert-all-org-buffers

:PROPERTIES: :CUSTOM_ID: org-babel-result-hide-all :END:

org-agenda-drag-line-forward (arg)

Fold all results in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-drag-line-forward :END:

org-export (&optional arg)

Drag an agenda line forward by ARG lines.

:PROPERTIES: :CUSTOM_ID: org-export :END:

org-agenda-bulk-toggle-all

Export dispatcher for Org-mode.
When `org-export-run-in-background' is non-nil, try to run the command
in the background.  This will be done only for commands that write
to a file.  For details see the docstring of `org-export-run-in-background'.

The prefix argument ARG will be passed to the exporter.  However, if
ARG is a double universal prefix C-u C-u, that means to inverse the
value of `org-export-run-in-background'.

If `org-export-initial-scope' is set to 'subtree, try to export
the current subtree, otherwise try to export the whole buffer.
Pressing `1' will switch between these two options.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-toggle-all :END:

org-decrypt-entries

Toggle all marks for bulk action.

:PROPERTIES: :CUSTOM_ID: org-decrypt-entries :END:

org-set-tags-command (&optional arg just-align)

Decrypt all entries in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-set-tags-command :END:

org-clock-sum (&optional tstart tend headline-filter propname)

Call the set-tags command for the current entry.

:PROPERTIES: :CUSTOM_ID: org-clock-sum :END:

org-babel-tangle-jump-to-org

Sum the times for each subtree.
Puts the resulting times in minutes as a text property on each headline.
TSTART and TEND can mark a time range to be considered.
HEADLINE-FILTER is a zero-arg function that, if specified, is called for
each headline in the time range with point at the headline.  Headlines for
which HEADLINE-FILTER returns nil are excluded from the clock summation.
PROPNAME lets you set a custom text property instead of :org-clock-minutes.

:PROPERTIES: :CUSTOM_ID: org-babel-tangle-jump-to-org :END:

org-columns-compute (property)

Jump from a tangled code file to the related Org-mode file.

:PROPERTIES: :CUSTOM_ID: org-columns-compute :END:

org-table-next-row

Sum the values of property PROPERTY hierarchically, for the entire buffer.

:PROPERTIES: :CUSTOM_ID: org-table-next-row :END:

org-export-dispatch (&optional arg)

Go to the next row (same column) in the current table.
Before doing so, re-align the table if necessary.

:PROPERTIES: :CUSTOM_ID: org-export-dispatch :END:

org-sort-list (&optional with-case sorting-type getkey-func compare-func)

Export dispatcher for Org mode.

It provides an access to common export related tasks in a buffer.
Its interface comes in two flavours: standard and expert.

While both share the same set of bindings, only the former
displays the valid keys associations in a dedicated buffer.
Scrolling (resp. line-wise motion) in this buffer is done with
SPC and DEL (resp. C-n and C-p) keys.

Set variable `org-export-dispatch-use-expert-ui' to switch to one
flavour or the other.

When ARG is C-u, repeat the last export action, with the same set
of options used back then, on the current buffer.

When ARG is C-u C-u, display the asynchronous export stack.

:PROPERTIES: :CUSTOM_ID: org-sort-list :END:

org-babel-exp-non-block-elements (start end)

Sort list items.
The cursor may be at any item of the list that should be sorted.
Sublists are not sorted.  Checkboxes, if any, are ignored.

Sorting can be alphabetically, numerically, by date/time as given
by a time stamp, by a property or by priority.

Comparing entries ignores case by default.  However, with an
optional argument WITH-CASE, the sorting considers case as well.

The command prompts for the sorting type unless it has been given
to the function through the SORTING-TYPE argument, which needs to
be a character, (?n ?N ?a ?A ?t ?T ?f ?F ?x ?X).  Here is the
detailed meaning of each character:

n   Numerically, by converting the beginning of the item to a number.
a   Alphabetically.  Only the first line of item is checked.
t   By date/time, either the first active time stamp in the entry, if
    any, or by the first inactive one.  In a timer list, sort the timers.
x   By "checked" status of a check list.

Capital letters will reverse the sort order.

If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies
a function to be called with point at the beginning of the
record.  It must return either a string or a number that should
serve as the sorting key for that record.  It will then use
COMPARE-FUNC to compare entries.

Sorting is done against the visible part of the headlines, it
ignores hidden links.

:PROPERTIES: :CUSTOM_ID: org-babel-exp-non-block-elements :END:

org-align-all-tags

Process inline source and call lines between START and END for export.

:PROPERTIES: :CUSTOM_ID: org-align-all-tags :END:

org-global-cycle (&optional arg)

Align the tags i all headings.

:PROPERTIES: :CUSTOM_ID: org-global-cycle :END:

org-preview-latex-fragment (&optional subtree)

Cycle the global visibility.  For details see `org-cycle'.
With C-u prefix arg, switch to startup visibility.
With a numeric prefix, show all headlines up to that level.

:PROPERTIES: :CUSTOM_ID: org-preview-latex-fragment :END:

org-columns-next-allowed-value (&optional previous nth)

Preview the LaTeX fragment at point, or all locally or globally.
If the cursor is in a LaTeX fragment, create the image and overlay
it over the source code.  If there is no fragment at point, display
all fragments in the current text, from one headline to the next.  With
prefix SUBTREE, display all fragments in the current subtree.  With a
double prefix arg C-u C-u, or when the cursor is before the first headline,
display all fragments in the buffer.
The images can be removed again with C-c C-c.

:PROPERTIES: :CUSTOM_ID: org-columns-next-allowed-value :END:

org-mouse-move-tree-start (event)

Switch to the next allowed value for this column.
When PREVIOUS is set, go to the previous value.  When NTH is
an integer, select that value.

:PROPERTIES: :CUSTOM_ID: org-mouse-move-tree-start :END:

org-babel-sha1-hash (&optional info)

:PROPERTIES: :CUSTOM_ID: org-babel-sha1-hash :END:

org-agenda-archive-to-archive-sibling

Generate an sha1 hash based on the value of info.

:PROPERTIES: :CUSTOM_ID: org-agenda-archive-to-archive-sibling :END:

org-agenda-remove-restriction-lock (&optional noupdate)

Move the entry to the archive sibling.

:PROPERTIES: :CUSTOM_ID: org-agenda-remove-restriction-lock :END:

org-agenda-manipulate-query-subtract

Remove the agenda restriction lock.

:PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-subtract :END:

org-clock-jump-to-current-clock (&optional effective-clock)

Manipulate the query by adding a search term with negative selection.
Negative selection means term must not be matched for selection of an entry.

:PROPERTIES: :CUSTOM_ID: org-clock-jump-to-current-clock :END:

org-previous-item

:PROPERTIES: :CUSTOM_ID: org-previous-item :END:

org-icalendar-export-agenda-files (&optional async)

Move to the beginning of the previous item.
Throw an error when not in a list.  Also throw an error when at
first item, unless `org-list-use-circular-motion' is non-nil.

:PROPERTIES: :CUSTOM_ID: org-icalendar-export-agenda-files :END:

org-columns-new (&optional prop title width op fmt fun &rest rest)

Export all agenda files to iCalendar files.
When optional argument ASYNC is non-nil, export happens in an
external process.

:PROPERTIES: :CUSTOM_ID: org-columns-new :END:

org-odt-export-to-odt (&optional async subtreep visible-only ext-plist)

Insert a new column, to the left of the current column.

:PROPERTIES: :CUSTOM_ID: org-odt-export-to-odt :END:

org-table-export (&optional file format)

Export current buffer to a ODT file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return output file's name.

:PROPERTIES: :CUSTOM_ID: org-table-export :END:

org-edit-src-save

Export table to a file, with configurable format.
Such a file can be imported into usual spreadsheet programs.

FILE can be the output file name.  If not given, it will be taken
from a TABLE_EXPORT_FILE property in the current entry or higher
up in the hierarchy, or the user will be prompted for a file
name.  FORMAT can be an export format, of the same kind as it
used when `orgtbl-mode' sends a table in a different format.

The command suggests a format depending on TABLE_EXPORT_FORMAT,
whether it is set locally or up in the hierarchy, then on the
extension of the given file name, and finally on the variable
`org-table-export-default-format'.

:PROPERTIES: :CUSTOM_ID: org-edit-src-save :END:

org-clock-sum-today (&optional headline-filter)

Save parent buffer with current state source-code buffer.

:PROPERTIES: :CUSTOM_ID: org-clock-sum-today :END:

org-babel-load-in-session (&optional arg info)

Sum the times for each subtree for today.

:PROPERTIES: :CUSTOM_ID: org-babel-load-in-session :END:

org-capture-finalize (&optional stay-with-capture)

Load the body of the current source-code block.
Evaluate the header arguments for the source block before
entering the session.  After loading the body this pops open the
session.

:PROPERTIES: :CUSTOM_ID: org-capture-finalize :END:

orgtbl-send-table (&optional maybe)

Finalize the capture process.
With prefix argument STAY-WITH-CAPTURE, jump to the location of the
captured item after finalizing.

:PROPERTIES: :CUSTOM_ID: orgtbl-send-table :END:

org-table-show-reference (&optional local)

Send a transformed version of this table to the receiver position.
With argument MAYBE, fail quietly if no transformation is defined for
this table.

:PROPERTIES: :CUSTOM_ID: org-table-show-reference :END:

org-indent-region (start end)

Show the location/value of the $ expression at point.

:PROPERTIES: :CUSTOM_ID: org-indent-region :END:

org-insert-export-options-template

Indent region.

:PROPERTIES: :CUSTOM_ID: org-insert-export-options-template :END:

Insert into the buffer a template with information for exporting.

:PROPERTIES: :CUSTOM_ID: org-toggle-link-display :END:

org-agenda-date-earlier (arg &optional what)

Toggle the literal or descriptive display of links.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-earlier :END:

org-convert-to-oddeven-levels

Change the date of this item to ARG day(s) earlier.

:PROPERTIES: :CUSTOM_ID: org-convert-to-oddeven-levels :END:

org-encrypt-entries

Convert an org-mode file with only odd levels to one with odd/even levels.
This promotes level 3 to level 2, level 5 to level 3 etc.  If the
file contains a section with an even level, conversion would
destroy the structure of the file.  An error is signaled in this
case.

:PROPERTIES: :CUSTOM_ID: org-encrypt-entries :END:

org-shiftcontrolup (&optional n)

Encrypt all top-level entries in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-shiftcontrolup :END:

org-agenda-tree-to-indirect-buffer (arg)

Change timestamps synchronously up in CLOCK log lines.
Optional argument N tells to change by that many units.

:PROPERTIES: :CUSTOM_ID: org-agenda-tree-to-indirect-buffer :END:

org-ctags-append-topic (name &optional narrowp)

Show the subtree corresponding to the current entry in an indirect buffer.
This calls the command `org-tree-to-indirect-buffer' from the original buffer.

With a numerical prefix ARG, go up to this level and then take that tree.
With a negative numeric ARG, go up by this number of levels.
With a C-u prefix, make a separate frame for this tree (i.e. don't
use the dedicated frame).

:PROPERTIES: :CUSTOM_ID: org-ctags-append-topic :END:

org-export-as-html-to-buffer (arg)

This function is intended to be used in ORG-OPEN-LINK-FUNCTIONS.
Append a new toplevel heading to the end of the current buffer.  The
heading contains NAME surrounded by <>, thus making
the heading a destination for the tag `NAME'.

:PROPERTIES: :CUSTOM_ID: org-export-as-html-to-buffer :END:

org-agenda-next-date-line (&optional arg)

Call `org-export-as-html` with output to a temporary buffer.
No file is created.  The prefix ARG is passed through to `org-export-as-html'.

:PROPERTIES: :CUSTOM_ID: org-agenda-next-date-line :END:

org-fill-paragraph (&optional justify)

Jump to the next line indicating a date in agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-fill-paragraph :END:

org-agenda-manipulate-query-add

Fill element at point, when applicable.

This function only applies to comment blocks, comments, example
blocks and paragraphs.  Also, as a special case, re-align table
when point is at one.

If JUSTIFY is non-nil (interactively, with prefix argument),
justify as well.  If `sentence-end-double-space' is non-nil, then
period followed by one space does not end a sentence, so don't
break a line there.  The variable `fill-column' controls the
width for filling.

For convenience, when point is at a plain list, an item or
a footnote definition, try to fill the first paragraph within.

:PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-add :END:

org-agenda-previous-date-line (&optional arg)

Manipulate the query by adding a search term with positive selection.
Positive selection means the term must be matched for selection of an entry.

:PROPERTIES: :CUSTOM_ID: org-agenda-previous-date-line :END:

org-columns-edit-allowed

Jump to the previous line indicating a date in agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-columns-edit-allowed :END:

org-export-as-html (arg &optional ext-plist to-buffer body-only pub-dir)

Edit the list of allowed values for the current property.

:PROPERTIES: :CUSTOM_ID: org-export-as-html :END:

Export the outline as a pretty HTML file.
If there is an active region, export only the region.  The prefix
ARG specifies how many levels of the outline should become
headlines.  The default is 3.  Lower levels will become bulleted
lists.  EXT-PLIST is a property list with external parameters overriding
org-mode's default settings, but still inferior to file-local
settings.  When TO-BUFFER is non-nil, create a buffer with that
name and export to that buffer.  If TO-BUFFER is the symbol
`string', don't leave any buffer behind but just return the
resulting HTML as a string.  When BODY-ONLY is set, don't produce
the file header and footer, simply return the content of
..., without even the body tags themselves.  When
PUB-DIR is set, use this as the publishing directory.

:PROPERTIES: :CUSTOM_ID: org-insert-link-global :END:

org-odt-convert (&optional in-file out-fmt prefix-arg)

Insert a link like Org-mode does.
This command can be called in any mode to insert a link in Org-mode syntax.

:PROPERTIES: :CUSTOM_ID: org-odt-convert :END:

org-cycle-list-bullet (&optional which)

Convert IN-FILE to format OUT-FMT using a command line converter.
IN-FILE is the file to be converted.  If unspecified, it defaults
to variable `buffer-file-name'.  OUT-FMT is the desired output
format.  Use `org-odt-convert-process' as the converter.
If PREFIX-ARG is non-nil then the newly converted file is opened
using `org-open-file'.

:PROPERTIES: :CUSTOM_ID: org-cycle-list-bullet :END:

Cycle through the different itemize/enumerate bullets.
This cycle the entire list level through the sequence:

   `-'  ->  `+'  ->  `*'  ->  `1.'  ->  `1)'

If WHICH is a valid string, use that as the new bullet.  If WHICH
is an integer, 0 means `-', 1 means `+' etc.  If WHICH is
`previous', cycle backwards.

:PROPERTIES: :CUSTOM_ID: org-mouse-yank-link :END:

org-agenda-refile (&optional goto rfloc no-update)

:PROPERTIES: :CUSTOM_ID: org-agenda-refile :END:

org-clock-mark-default-task

Refile the item at point.

When GOTO is 0 or '(64), clear the refile cache.
When GOTO is '(16), go to the location of the last refiled item.
RFLOC can be a refile location obtained in a different way.
When NO-UPDATE is non-nil, don't redo the agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-clock-mark-default-task :END:

orgtbl-tab (arg)

Mark current task as default task.

:PROPERTIES: :CUSTOM_ID: orgtbl-tab :END:

Justification and field motion for `orgtbl-mode'.

:PROPERTIES: :CUSTOM_ID: org-open-link-from-string :END:

org-babel-next-src-block (&optional arg)

Open a link in the string S, as if it was in Org-mode.

:PROPERTIES: :CUSTOM_ID: org-babel-next-src-block :END:

org-beamer-select-environment

Jump to the next source block.
With optional prefix argument ARG, jump forward ARG many source blocks.

:PROPERTIES: :CUSTOM_ID: org-beamer-select-environment :END:

org-do-promote

Select the environment to be used by beamer for this entry.
While this uses (for convenience) a tag selection interface, the
result of this command will be that the BEAMER_env *property* of
the entry is set.

In addition to this, the command will also set a tag as a visual
aid, but the tag does not have any semantic meaning.

:PROPERTIES: :CUSTOM_ID: org-do-promote :END:

org-iswitchb (&optional arg)

Promote the current heading higher up the tree.
If the region is active in `transient-mark-mode', promote all headings
in the region.

:PROPERTIES: :CUSTOM_ID: org-iswitchb :END:

org-table-recalculate (&optional all noalign)

Switch between Org buffers.
With one prefix argument, restrict available buffers to files.
With two prefix arguments, restrict available buffers to agenda files.

Defaults to `iswitchb' for buffer name completion.
Set `org-completion-use-ido' to make it use ido instead.

:PROPERTIES: :CUSTOM_ID: org-table-recalculate :END:

org-table-delete-column

Recalculate the current table line by applying all stored formulas.
With prefix arg ALL, do this for all lines in the table.
With the prefix argument ALL is `(16)' (a double M-x universal-prefix M-x universal-prefix prefix), or if
it is the symbol `iterate', recompute the table until it no longer changes.
If NOALIGN is not nil, do not re-align the table after the computations
are done.  This is typically used internally to save time, if it is
known that the table will be realigned a little later anyway.

:PROPERTIES: :CUSTOM_ID: org-table-delete-column :END:

org-habit-toggle-habits

Delete a column from the table.

:PROPERTIES: :CUSTOM_ID: org-habit-toggle-habits :END:

org-dblock-update (&optional arg)

Toggle display of habits in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-dblock-update :END:

org-ctrl-c-ctrl-c (&optional arg)

User command for updating dynamic blocks.
Update the dynamic block at point.  With prefix ARG, update all dynamic
blocks in the buffer.

:PROPERTIES: :CUSTOM_ID: org-ctrl-c-ctrl-c :END:

org-id-copy

Set tags in headline, or update according to changed information at point.

This command does many different things, depending on context:

- If a function in `org-ctrl-c-ctrl-c-hook' recognizes this location,
  this is what we do.

- If the cursor is on a statistics cookie, update it.

- If the cursor is in a headline, prompt for tags and insert them
  into the current line, aligned to `org-tags-column'.  When called
  with prefix arg, realign all tags in the current buffer.

- If the cursor is in one of the special #+KEYWORD lines, this
  triggers scanning the buffer for these lines and updating the
  information.

- If the cursor is inside a table, realign the table.  This command
  works even if the automatic table editor has been turned off.

- If the cursor is on a #+TBLFM line, re-apply the formulas to
  the entire table.

- If the cursor is at a footnote reference or definition, jump to
  the corresponding definition or references, respectively.

- If the cursor is a the beginning of a dynamic block, update it.

- If the current buffer is a capture buffer, close note and file it.

- If the cursor is on a <<>>, update radio targets and
  corresponding links in this buffer.

- If the cursor is on a numbered item in a plain list, renumber the
  ordered list.

- If the cursor is on a checkbox, toggle it.

- If the cursor is on a code block, evaluate it.  The variable
  `org-confirm-babel-evaluate' can be used to control prompting
  before code block evaluation, by default every code block
  evaluation requires confirmation.  Code block evaluation can be
  inhibited by setting `org-babel-no-eval-on-ctrl-c-ctrl-c'.

:PROPERTIES: :CUSTOM_ID: org-id-copy :END:

orgtbl-toggle-comment

Copy the ID of the entry at point to the kill ring.
Create an ID if necessary.

:PROPERTIES: :CUSTOM_ID: orgtbl-toggle-comment :END:

org-export-region-as-html (beg end &optional body-only buffer)

Comment or uncomment the orgtbl at point.

:PROPERTIES: :CUSTOM_ID: org-export-region-as-html :END:

org-agenda-date-later (arg &optional what)

Convert region from BEG to END in org-mode buffer to HTML.
If prefix arg BODY-ONLY is set, omit file header, footer, and table of
contents, and only produce the region of converted text, useful for
cut-and-paste operations.
If BUFFER is a buffer or a string, use/create that buffer as a target
of the converted HTML.  If BUFFER is the symbol `string', return the
produced HTML as a string and leave not buffer behind.  For example,
a Lisp program could call this function in the following way:

  (setq html (org-export-region-as-html beg end t 'string))

When called interactively, the output buffer is selected, and shown
in a window.  A non-interactive call will only return the buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-later :END:

org-ctags-find-tag (name)

Change the date of this item to ARG day(s) later.

:PROPERTIES: :CUSTOM_ID: org-ctags-find-tag :END:

org-footnote-goto-definition (label)

This function is intended to be used in ORG-OPEN-LINK-FUNCTIONS.
Look for a tag called `NAME' in the current TAGS table.  If it is found,
visit the file and location where the tag is found.

:PROPERTIES: :CUSTOM_ID: org-footnote-goto-definition :END:

org-toggle-archive-tag (&optional find-done)

Move point to the definition of the footnote LABEL.
Return a non-nil value when a definition has been found.

:PROPERTIES: :CUSTOM_ID: org-toggle-archive-tag :END:

org-attach-reveal-in-emacs

Toggle the archive tag for the current headline.
With prefix ARG, check all children of current headline and offer tagging
the children that do not contain any open TODO items.

:PROPERTIES: :CUSTOM_ID: org-attach-reveal-in-emacs :END:

org-sort (with-case)

Show the attachment directory of the current task in dired.

:PROPERTIES: :CUSTOM_ID: org-sort :END:

org-archive-set-tag

Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'.
Optional argument WITH-CASE means sort case-sensitively.

:PROPERTIES: :CUSTOM_ID: org-archive-set-tag :END:

org-goto-local-auto-isearch

Set the ARCHIVE tag.

:PROPERTIES: :CUSTOM_ID: org-goto-local-auto-isearch :END:

org-entities-help

Start isearch.

:PROPERTIES: :CUSTOM_ID: org-entities-help :END:

org-agenda-set-effort

Create a Help buffer with all available entities.

:PROPERTIES: :CUSTOM_ID: org-agenda-set-effort :END:

org-goto-calendar (&optional arg)

Set the effort property for the current headline.

:PROPERTIES: :CUSTOM_ID: org-goto-calendar :END:

org-version (&optional here full message)

Go to the Emacs calendar at the current date.
If there is a time stamp in the current line, go to that date.
A prefix ARG can be used to force the current date.

:PROPERTIES: :CUSTOM_ID: org-version :END:

org-transpose-words

Show the org-mode version in the echo area.
With prefix argument HERE, insert it at point.
When FULL is non-nil, use a verbose version string.
When MESSAGE is non-nil, display a message with the version.

:PROPERTIES: :CUSTOM_ID: org-transpose-words :END:

org-toggle-comment

Transpose words for Org.
This uses the `org-mode-transpose-word-syntax-table' syntax
table, which interprets characters in `org-emphasis-alist' as
word constituants.

:PROPERTIES: :CUSTOM_ID: org-toggle-comment :END:

org-agenda-drag-line-backward (arg)

Change the COMMENT state of an entry.

:PROPERTIES: :CUSTOM_ID: org-agenda-drag-line-backward :END:

org-tags-view (&optional todo-only match)

Drag an agenda line backward by ARG lines.

:PROPERTIES: :CUSTOM_ID: org-tags-view :END:

org-attach-attach-lns

Show all headlines for all `org-agenda-files' matching a TAGS criterion.
The prefix arg TODO-ONLY limits the search to TODO entries.

:PROPERTIES: :CUSTOM_ID: org-attach-attach-lns :END:

org-indent-line

Attach a file by creating a symbolic link to it.

Beware that this does not work on systems that do not support symbolic links.
On some systems, this apparently does copy the file instead.

:PROPERTIES: :CUSTOM_ID: org-indent-line :END:

org-metaup (&optional arg)

Indent line depending on context.

:PROPERTIES: :CUSTOM_ID: org-metaup :END:

org-clock-cancel

Move subtree up or move table row up.
Calls `org-move-subtree-up' or `org-table-move-row' or
`org-move-item-up', depending on context.  See the individual commands
for more information.

:PROPERTIES: :CUSTOM_ID: org-clock-cancel :END:

org-agenda-priority-down

Cancel the running clock by removing the start timestamp.

:PROPERTIES: :CUSTOM_ID: org-agenda-priority-down :END:

org-agenda-archive

Decrease the priority of line at point, also in Org-mode file.

:PROPERTIES: :CUSTOM_ID: org-agenda-archive :END:

org-table-current-dline

Archive the entry or subtree belonging to the current agenda entry.

:PROPERTIES: :CUSTOM_ID: org-table-current-dline :END:

org-src-fontify-block

Find out what table data line we are in.
Only data lines count for this.

:PROPERTIES: :CUSTOM_ID: org-src-fontify-block :END:

org-refile-goto-last-stored

Fontify code block at point.

:PROPERTIES: :CUSTOM_ID: org-refile-goto-last-stored :END:

org-babel-load-file (file &optional compile)

Go to the location where the last refile was stored.

:PROPERTIES: :CUSTOM_ID: org-babel-load-file :END:

org-html-export-to-html (&optional async subtreep visible-only body-only ext-plist)

Load Emacs Lisp source code blocks in the Org-mode FILE.
This function exports the source code using `org-babel-tangle'
and then loads the resulting file using `load-file'.  With prefix
arg (noninteractively: 2nd arg) COMPILE the tangled Emacs Lisp
file to byte-code before it is loaded.

:PROPERTIES: :CUSTOM_ID: org-html-export-to-html :END:

org-latex-export-to-latex (&optional async subtreep visible-only body-only ext-plist)

Export current buffer to a HTML file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "" and "" tags.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return output file's name.

:PROPERTIES: :CUSTOM_ID: org-latex-export-to-latex :END:

org-archive-subtree-default

Export current buffer to a LaTeX file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

:PROPERTIES: :CUSTOM_ID: org-archive-subtree-default :END:

org-rss-export-to-rss (&optional async subtreep visible-only)

Archive the current subtree with the default command.
This command is set with the variable `org-archive-default-command'.

:PROPERTIES: :CUSTOM_ID: org-rss-export-to-rss :END:

org-id-update-id-locations (&optional files silent)

Export current buffer to a RSS file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

Return output file's name.

:PROPERTIES: :CUSTOM_ID: org-id-update-id-locations :END:

org-mouse-move-tree (event)

Scan relevant files for IDs.
Store the relation between files and corresponding IDs.
This will scan all agenda files, all associated archives, and all
files currently mentioned in `org-id-locations'.
When FILES is given, scan these files instead.
When CHECK is given, prepare detailed information about duplicate IDs.

:PROPERTIES: :CUSTOM_ID: org-mouse-move-tree :END:

org-cycle-agenda-files

:PROPERTIES: :CUSTOM_ID: org-cycle-agenda-files :END:

org-property-previous-allowed-value (&optional previous)

Cycle through the files in `org-agenda-files'.
If the current buffer visits an agenda file, find the next one in the list.
If the current buffer does not, find the first agenda file.

:PROPERTIES: :CUSTOM_ID: org-property-previous-allowed-value :END:

org-feed-goto-inbox (feed)

Switch to the next allowed value for this property.

:PROPERTIES: :CUSTOM_ID: org-feed-goto-inbox :END:

org-columns-move-left

Go to the inbox that captures the feed named FEED.

:PROPERTIES: :CUSTOM_ID: org-columns-move-left :END:

org-metaleft (&optional arg)

Swap this column with the one to the left.

:PROPERTIES: :CUSTOM_ID: org-metaleft :END:

org-latex-export-as-latex (&optional async subtreep visible-only body-only ext-plist)

Promote heading or move table column to left.
Calls `org-do-promote' or `org-table-move-column', depending on context.
With no specific context, calls the Emacs default `backward-word'.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-latex-export-as-latex :END:

org-goto-left

Export current buffer as a LaTeX buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{document}" and "\end{document}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org LATEX Export*", which
will be displayed when `org-export-show-temporary-export-buffer'
is non-nil.

:PROPERTIES: :CUSTOM_ID: org-goto-left :END:

org-copy-special

Finish `org-goto' by going to the new location.

:PROPERTIES: :CUSTOM_ID: org-copy-special :END:

org-update-dblock

Copy region in table or copy current subtree.
Calls `org-table-copy' or `org-copy-subtree', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-update-dblock :END:

org-list-insert-radio-list

Update the dynamic block at point.
This means to empty the block, parse for parameters and then call
the correct writing function.

:PROPERTIES: :CUSTOM_ID: org-list-insert-radio-list :END:

orgstruct-error

Insert a radio list template appropriate for this major mode.

:PROPERTIES: :CUSTOM_ID: orgstruct-error :END:

org-shiftmetadown (&optional arg)

Error when there is no default binding for a structure key.

:PROPERTIES: :CUSTOM_ID: org-shiftmetadown :END:

org-agenda-list-stuck-projects (&rest ignore)

Move subtree down or insert table row.
Calls `org-move-subtree-down' or `org-table-insert-row' or
`org-move-item-down' or `org-timestamp-up', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-agenda-list-stuck-projects :END:

org-mobile-pull

Create agenda view for projects that are stuck.
Stuck projects are project that have no next actions.  For the definitions
of what a project is and how to check if it stuck, customize the variable
`org-stuck-projects'.

:PROPERTIES: :CUSTOM_ID: org-mobile-pull :END:

org-convert-to-odd-levels

Pull the contents of `org-mobile-capture-file' and integrate them.
Apply all flagged actions, flag entries to be flagged and then call an
agenda view showing the flagged items.

:PROPERTIES: :CUSTOM_ID: org-convert-to-odd-levels :END:

org-agenda-menu (event)

Convert an org-mode file with all levels allowed to one with odd levels.
This will leave level 1 alone, convert level 2 to level 3, level 3 to
level 5 etc.

:PROPERTIES: :CUSTOM_ID: org-agenda-menu :END:

org-mobile-apply (&optional beg end)

Agenda menu

:PROPERTIES: :CUSTOM_ID: org-mobile-apply :END:

org-table-recalculate-buffer-tables

Apply all change requests in the current buffer.
If BEG and END are given, only do this in that region.

:PROPERTIES: :CUSTOM_ID: org-table-recalculate-buffer-tables :END:

org-koma-letter-export-to-latex (&optional async subtreep visible-only body-only ext-plist)

Recalculate all tables in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-koma-letter-export-to-latex :END:

org-timestamp-down (&optional arg)

Export current buffer as a KOMA Scrlttr2 letter (tex).

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{letter}" and "\end{letter}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

When optional argument PUB-DIR is set, use it as the publishing
directory.

Return output file's name.

:PROPERTIES: :CUSTOM_ID: org-timestamp-down :END:

org-agenda-clock-goto

Decrease the date item at the cursor by one.
If the cursor is on the year, change the year.  If it is on the month,
the day or the time, change that.
With prefix ARG, change by that many units.

:PROPERTIES: :CUSTOM_ID: org-agenda-clock-goto :END:

org-shiftup (&optional arg)

Jump to the currently clocked in task within the agenda.
If the currently clocked in task is not listed in the agenda
buffer, display it in another window.

:PROPERTIES: :CUSTOM_ID: org-shiftup :END:

org-table-convert-region (beg0 end0 &optional separator)

Increase item in timestamp or increase priority of current headline.
Calls `org-timestamp-up' or `org-priority-up', or `org-previous-item',
depending on context.  See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-table-convert-region :END:

org-agenda-goto-today

Convert region to a table.
The region goes from BEG0 to END0, but these borders will be moved
slightly, to make sure a beginning of line in the first line is included.

SEPARATOR specifies the field separator in the lines.  It can have the
following values:

'(4)     Use the comma as a field separator
'(16)    Use a TAB as field separator
integer  When a number, use that many spaces as field separator
nil      When nil, the command tries to be smart and figure out the
         separator in the following way:
         - when each line contains a TAB, assume TAB-separated material
         - when each line contains a comma, assume CSV material
         - else, assume one or more SPACE characters as separator.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-today :END:

Go to today.

:PROPERTIES: :CUSTOM_ID: org-columns-open-link :END:

org-ido-switchb (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-ido-switchb :END:

org-hide-block-all

Switch between Org buffers.
With one prefix argument, restrict available buffers to files.
With two prefix arguments, restrict available buffers to agenda files.

Defaults to `iswitchb' for buffer name completion.
Set `org-completion-use-ido' to make it use ido instead.

:PROPERTIES: :CUSTOM_ID: org-hide-block-all :END:

org-table-copy-region (beg end &optional cut)

Fold all blocks in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-table-copy-region :END:

org-ctags-create-tags (&optional directory-name)

Copy rectangular region in table to clipboard.
A special clipboard is used which can only be accessed
with `org-table-paste-rectangle'.

:PROPERTIES: :CUSTOM_ID: org-ctags-create-tags :END:

org-speed-command-help

(Re)create tags file in the directory of the active buffer.
The file will contain tag definitions for all the files in the
directory and its subdirectories which are recognized by ctags.
This will include files ending in `.org' as well as most other
source files (.C, .H, .EL, .LISP, etc).  All the resulting tags
end up in one file, called TAGS, located in the directory.  This
function may take several seconds to finish if the directory or
its subdirectories contain large numbers of taggable files.

:PROPERTIES: :CUSTOM_ID: org-speed-command-help :END:

org-table-move-row-down

Show the available speed commands.

:PROPERTIES: :CUSTOM_ID: org-table-move-row-down :END:

org-agenda-clock-in (&optional arg)

Move table row down.

:PROPERTIES: :CUSTOM_ID: org-agenda-clock-in :END:

org-shiftcontroldown (&optional n)

Start the clock on the currently selected item.

:PROPERTIES: :CUSTOM_ID: org-shiftcontroldown :END:

org-agenda-list (&optional arg start-day span with-hour)

Change timestamps synchronously down in CLOCK log lines.
Optional argument N tells to change by that many units.

:PROPERTIES: :CUSTOM_ID: org-agenda-list :END:

org-agenda-clock-cancel (&optional arg)

Produce a daily/weekly view from all files in variable `org-agenda-files'.
The view will be for the current day or week, but from the overview buffer
you will be able to go to other days/weeks.

With a numeric prefix argument in an interactive call, the agenda will
span ARG days.  Lisp programs should instead specify SPAN to change
the number of days.  SPAN defaults to `org-agenda-span'.

START-DAY defaults to TODAY, or to the most recent match for the weekday
given in `org-agenda-start-on-weekday'.

When WITH-HOUR is non-nil, only include scheduled and deadline
items if they have an hour specification like [h]h:mm.

:PROPERTIES: :CUSTOM_ID: org-agenda-clock-cancel :END:

org-babel-initiate-session (&optional arg info)

Cancel the currently running clock.

:PROPERTIES: :CUSTOM_ID: org-babel-initiate-session :END:

org-table-move-row (&optional up)

Initiate session for current code block.
If called with a prefix argument then resolve any variable
references in the header arguments and assign these variables in
the session.  Copy the body of the code block to the kill ring.

:PROPERTIES: :CUSTOM_ID: org-table-move-row :END:

org-agenda-do-date-earlier (arg)

Move the current table line down.  With arg UP, move it up.

:PROPERTIES: :CUSTOM_ID: org-agenda-do-date-earlier :END:

org-koma-letter-export-as-latex (&optional async subtreep visible-only body-only ext-plist)

:PROPERTIES: :CUSTOM_ID: org-koma-letter-export-as-latex :END:

org-agenda-filter-by-category (strip)

Export current buffer as a KOMA Scrlttr2 letter.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

When optional argument BODY-ONLY is non-nil, only write code
between "\begin{letter}" and "\end{letter}".

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Export is done in a buffer named "*Org KOMA-LETTER Export*".  It
will be displayed if `org-export-show-temporary-export-buffer' is
non-nil.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-category :END:

org-check-deadlines (ndays)

Keep only those lines in the agenda buffer that have a specific category.
The category is that of the current line.

:PROPERTIES: :CUSTOM_ID: org-check-deadlines :END:

org-agenda-dim-blocked-tasks (&optional invisible)

Check if there are any deadlines due or past due.
A deadline is considered due if it happens within `org-deadline-warning-days'
days from today's date.  If the deadline appears in an entry marked DONE,
it is not shown.  The prefix arg NDAYS can be used to test that many
days.  If the prefix is a raw C-u prefix, all deadlines are shown.

:PROPERTIES: :CUSTOM_ID: org-agenda-dim-blocked-tasks :END:

org-agenda-goto-block-beginning

Dim currently blocked TODO's in the agenda display.
When INVISIBLE is non-nil, hide currently blocked TODO instead of
dimming them.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-block-beginning :END:

org-capture-goto-last-stored

Go the agenda block beginning.

:PROPERTIES: :CUSTOM_ID: org-capture-goto-last-stored :END:

org-agenda-next-item (n)

Go to the location where the last capture note was stored.

:PROPERTIES: :CUSTOM_ID: org-agenda-next-item :END:

org-agenda-columns

Move cursor to next agenda item.

:PROPERTIES: :CUSTOM_ID: org-agenda-columns :END:

org-agenda-toggle-deadlines

Turn on or update column view in the agenda.

:PROPERTIES: :CUSTOM_ID: org-agenda-toggle-deadlines :END:

org-footnote-create-definition (label)

Toggle inclusion of entries with a deadline in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-footnote-create-definition :END:

org-decrypt-entry

Start the definition of a footnote with label LABEL.

:PROPERTIES: :CUSTOM_ID: org-decrypt-entry :END:

org-add-planning-info (what &optional time &rest remove)

Decrypt the content of the current headline.

:PROPERTIES: :CUSTOM_ID: org-add-planning-info :END:

org-property-action

Insert new timestamp with keyword in the line directly after the headline.
WHAT indicates what kind of time stamp to add.  TIME indicates the time to use.
If non is given, the user is prompted for a date.
REMOVE indicates what kind of entries to remove.  An old WHAT entry will also
be removed.

:PROPERTIES: :CUSTOM_ID: org-property-action :END:

org-toggle-pretty-entities

Do an action on properties.

:PROPERTIES: :CUSTOM_ID: org-toggle-pretty-entities :END:

org-find-file-at-mouse (ev)

Toggle the composition display of entities as UTF8 characters.

:PROPERTIES: :CUSTOM_ID: org-find-file-at-mouse :END:

org-outdent-item-tree

Open file link or URL at mouse.

:PROPERTIES: :CUSTOM_ID: org-outdent-item-tree :END:

org-columns-redo

Outdent a local list item including its children.
If a region is active, all items inside will be moved.

:PROPERTIES: :CUSTOM_ID: org-columns-redo :END:

org-agenda-show-1 (&optional more)

Construct the column display again.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-1 :END:

org-agenda-filter-by-tag-refine (strip &optional char)

Display the Org-mode file which contains the item at point.
The prefix arg selects the amount of information to display:

0   hide the subtree
1   just show the entry according to defaults.
2   show the children view
3   show the subtree view
4   show the entire subtree and any LOGBOOK drawers
5   show the entire subtree and any drawers
With prefix argument FULL-ENTRY, make the entire entry visible
if it was hidden in the outline.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-tag-refine :END:

org-bibtex-read-buffer (buffer)

Refine the current filter.  See `org-agenda-filter-by-tag'.

:PROPERTIES: :CUSTOM_ID: org-bibtex-read-buffer :END:

org-export-as-html-and-open (arg)

Read all bibtex entries in BUFFER and save to `org-bibtex-entries'.
Return the number of saved entries.

:PROPERTIES: :CUSTOM_ID: org-export-as-html-and-open :END:

org-babel-detangle (&optional source-code-file)

Export the outline as HTML and immediately open it with a browser.
If there is an active region, export only the region.
The prefix ARG specifies how many levels of the outline should become
headlines.  The default is 3.  Lower levels will become bulleted lists.

:PROPERTIES: :CUSTOM_ID: org-babel-detangle :END:

org-toggle-heading (&optional nstars)

Propagate changes in source file back original to Org-mode file.
This requires that code blocks were tangled with link comments
which enable the original code blocks to be found.

:PROPERTIES: :CUSTOM_ID: org-toggle-heading :END:

org-mark-element

Convert headings to normal text, or items or text to headings.
If there is no active region, only convert the current line.

With a C-u prefix, convert the whole list at
point into heading.

In a region:

- If the first non blank line is a headline, remove the stars
  from all headlines in the region.

- If it is a normal line, turn each and every normal line (i.e.,
  not an heading or an item) in the region into headings.  If you
  want to convert only the first line of this region, use one
  universal prefix argument.

- If it is a plain list item, turn all plain list items into headings.

When converting a line into a heading, the number of stars is chosen
such that the lines become children of the current entry.  However,
when a numeric prefix argument is given, its value determines the
number of stars to add.

:PROPERTIES: :CUSTOM_ID: org-mark-element :END:

org-display-inline-images (&optional include-linked refresh beg end)

Put point at beginning of this element, mark at end.

Interactively, if this command is repeated or (in Transient Mark
mode) if the mark is active, it marks the next element after the
ones already marked.

:PROPERTIES: :CUSTOM_ID: org-display-inline-images :END:

org-refile (&optional goto default-buffer rfloc msg)

Display inline images.
Normally only links without a description part are inlined, because this
is how it will work for export.  When INCLUDE-LINKED is set, also links
with a description part will be inlined.  This can be nice for a quick
look at those images, but it does not reflect what exported files will look
like.
When REFRESH is set, refresh existing images between BEG and END.
This will create new image displays only if necessary.
BEG and END default to the buffer boundaries.

:PROPERTIES: :CUSTOM_ID: org-refile :END:

org-agenda-fontify-priorities

Move the entry or entries at point to another heading.
The list of target headings is compiled using the information in
`org-refile-targets', which see.

At the target location, the entry is filed as a subitem of the target
heading.  Depending on `org-reverse-note-order', the new subitem will
either be the first or the last subitem.

If there is an active region, all entries in that region will be moved.
However, the region must fulfill the requirement that the first heading
is the first one sets the top-level of the moved text - at most siblings
below it are allowed.

With prefix arg GOTO, the command will only visit the target location
and not actually move anything.

With a double prefix arg C-u C-u, go to the location where the last refiling operation has put the subtree.

With a numeric prefix argument of `2', refile to the running clock.

With a numeric prefix argument of `3', emulate `org-refile-keep'
being set to `t' and copy to the target location, don't move it.
Beware that keeping refiled entries may result in duplicated ID
properties.

RFLOC can be a refile location obtained in a different way.

MSG is a string to replace "Refile" in the default prompt with
another verb.  E.g. `org-copy' sets this parameter to "Copy".

See also `org-refile-use-outline-path' and `org-completion-use-ido'.

If you are using target caching (see `org-refile-use-cache'),
you have to clear the target cache in order to find new targets.
This can be done with a 0 prefix (`C-0 C-c C-w') or a triple
prefix argument (`C-u C-u C-u C-c C-w').

:PROPERTIES: :CUSTOM_ID: org-agenda-fontify-priorities :END:

org-table-rotate-recalc-marks (&optional newchar)

Make highest priority lines bold, and lowest italic.

:PROPERTIES: :CUSTOM_ID: org-table-rotate-recalc-marks :END:

org-mobile-push

Rotate the recalculation mark in the first column.
If in any row, the first field is not consistent with a mark,
insert a new column for the markers.
When there is an active region, change all the lines in the region,
after prompting for the marking character.
After each change, a message will be displayed indicating the meaning
of the new mark.

:PROPERTIES: :CUSTOM_ID: org-mobile-push :END:

org-force-cycle-archived

Push the current state of Org affairs to the target directory.
This will create the index file, copy all agenda files there, and also
create all custom agenda views, for upload to the mobile phone.

:PROPERTIES: :CUSTOM_ID: org-force-cycle-archived :END:

org-agenda-goto-calendar

Cycle subtree even if it is archived.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-calendar :END:

org-babel-goto-src-block-head

Open the Emacs calendar with the date at the cursor.

:PROPERTIES: :CUSTOM_ID: org-babel-goto-src-block-head :END:

orgstruct++-mode (&optional arg)

Go to the beginning of the current code block.

:PROPERTIES: :CUSTOM_ID: orgstruct++-mode :END:

org-clock-modify-effort-estimate (&optional value)

Toggle `orgstruct-mode', the enhanced version of it.
In addition to setting orgstruct-mode, this also exports all
indentation and autofilling variables from org-mode into the
buffer.  It will also recognize item context in multiline items.

:PROPERTIES: :CUSTOM_ID: org-clock-modify-effort-estimate :END:

org-mark-subtree (&optional up)

Add to or set the effort estimate of the item currently being clocked.
VALUE can be a number of minutes, or a string with format hh:mm or mm.
When the string starts with a + or a - sign, the current value of the effort
property will be changed by that amount.  If the effort value is expressed
as an `org-effort-durations' (e.g. "3h"), the modificied value will be
converted to a hh:mm duration.

This command will update the "Effort" property of the currently
clocked item, and the value displayed in the mode line.

:PROPERTIES: :CUSTOM_ID: org-mark-subtree :END:

org-backward-sentence (&optional arg)

Mark the current subtree.
This puts point at the start of the current subtree, and mark at
the end.  If a numeric prefix UP is given, move up into the
hierarchy of headlines by UP levels before marking the subtree.

:PROPERTIES: :CUSTOM_ID: org-backward-sentence :END:

org-odt-export-as-odf (latex-frag &optional odf-file)

Go to beginning of sentence, or beginning of table field.
This will call `backward-sentence' or `org-table-beginning-of-field',
depending on context.

:PROPERTIES: :CUSTOM_ID: org-odt-export-as-odf :END:

org-datetree-cleanup

Export LATEX-FRAG as OpenDocument formula file ODF-FILE.
Use `org-create-math-formula' to convert LATEX-FRAG first to
MathML.  When invoked as an interactive command, use
`org-latex-regexps' to infer LATEX-FRAG from currently active
region.  If no LaTeX fragments are found, prompt for it.  Push
MathML source to kill ring depending on the value of
`org-export-copy-to-kill-ring'.

:PROPERTIES: :CUSTOM_ID: org-datetree-cleanup :END:

org-show-todo-tree (arg)

Make sure all entries in the current tree are under the correct date.
It may be useful to restrict the buffer to the applicable portion
before running this command, even though the command tries to be smart.

:PROPERTIES: :CUSTOM_ID: org-show-todo-tree :END:

org-plot/gnuplot-to-grid-data (table data-file params)

Make a compact tree which shows all headlines marked with TODO.
The tree will show the lines where the regexp matches, and all higher
headlines above the match.
With a C-u prefix, prompt for a regexp to match.
With a numeric prefix N, construct a sparse tree for the Nth element
of `org-todo-keywords-1'.

:PROPERTIES: :CUSTOM_ID: org-plot/gnuplot-to-grid-data :END:

org-babel-hide-result-toggle (&optional force)

Export the data in TABLE to DATA-FILE for gnuplot.
This means in a format appropriate for grid plotting by gnuplot.
PARAMS specifies which columns of TABLE should be plotted as independent
and dependant variables.

:PROPERTIES: :CUSTOM_ID: org-babel-hide-result-toggle :END:

org-remove-occur-highlights (&optional beg end noremove)

Toggle the visibility of the current result.

:PROPERTIES: :CUSTOM_ID: org-remove-occur-highlights :END:

org-src-fontify-buffer

Remove the occur highlights from the buffer.
BEG and END are ignored.  If NOREMOVE is nil, remove this function
from the `before-change-functions' in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-src-fontify-buffer :END:

org-table-fedit-toggle-ref-type

Fontify all code blocks in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-toggle-ref-type :END:

org-insert-todo-heading (arg &optional force-heading)

Convert all references in the buffer from B3 to @3$2 and back.

:PROPERTIES: :CUSTOM_ID: org-insert-todo-heading :END:

org-drag-element-backward

Insert a new heading with the same level and TODO state as current heading.
If the heading has no TODO state, or if the state is DONE, use the first
state (TODO by default).  Also one prefix arg, force first state.  With two
prefix args, force inserting at the end of the parent subtree.

:PROPERTIES: :CUSTOM_ID: org-drag-element-backward :END:

org-bibtex-check-all (&optional optional)

Move backward element at point.

:PROPERTIES: :CUSTOM_ID: org-bibtex-check-all :END:

org-show-block-all

Check all headlines in the current file.
With prefix argument OPTIONAL also prompt for optional fields.

:PROPERTIES: :CUSTOM_ID: org-show-block-all :END:

org-cdlatex-mode (&optional arg)

Unfold all blocks in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-cdlatex-mode :END:

org-columns (&optional columns-fmt-string)

Toggle the minor `org-cdlatex-mode'.
This mode supports entering LaTeX environment and math in LaTeX fragments
in Org-mode.
key             binding
---             -------

C-c		Prefix Command
'		org-cdlatex-math-modify
^ .. _		org-cdlatex-underscore-caret
`		cdlatex-math-symbol

C-c {		cdlatex-environment


:PROPERTIES: :CUSTOM_ID: org-columns :END:

org-babel-execute-subtree (&optional arg)

Turn on column view on an org-mode file.
When COLUMNS-FMT-STRING is non-nil, use it as the column format.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-subtree :END:

org-set-property (property value)

Execute source code blocks in a subtree.
Call `org-babel-execute-src-block' on every source block in
the current subtree.

:PROPERTIES: :CUSTOM_ID: org-set-property :END:

org-plot/goto-nearest-table

In the current entry, set PROPERTY to VALUE.
When called interactively, this will prompt for a property name, offering
completion on existing and default properties.  And then it will prompt
for a value, offering completion either on allowed values (via an inherited
xxx_ALL property) or on existing values in other instances of this property
in the current file.

:PROPERTIES: :CUSTOM_ID: org-plot/goto-nearest-table :END:

org-babel-describe-bindings

Move the point forward to the beginning of nearest table.
Return value is the point at the beginning of the table.

:PROPERTIES: :CUSTOM_ID: org-babel-describe-bindings :END:

org-down-element

Describe all keybindings behind `org-babel-key-prefix'.

:PROPERTIES: :CUSTOM_ID: org-down-element :END:

org-columns-show-value

Move to inner element.

:PROPERTIES: :CUSTOM_ID: org-columns-show-value :END:

org-table-field-info (arg)

Show the full value of the property.

:PROPERTIES: :CUSTOM_ID: org-table-field-info :END:

org-insert-heading-respect-content (&optional arg invisible-ok)

Show info about the current field, and highlight any reference at point.

:PROPERTIES: :CUSTOM_ID: org-insert-heading-respect-content :END:

org-toggle-checkbox (&optional toggle-presence)

Insert heading with `org-insert-heading-respect-content' set to t.

:PROPERTIES: :CUSTOM_ID: org-toggle-checkbox :END:

org-set-visibility-according-to-property (&optional no-cleanup)

Toggle the checkbox in the current line.
With prefix arg TOGGLE-PRESENCE, add or remove checkboxes.  With
double prefix, set checkbox to [-].

When there is an active region, toggle status or presence of the
first checkbox there, and make every item inside have the same
status or presence, respectively.

If the cursor is in a headline, apply this to all checkbox items
in the text below the heading, taking as reference the first item
in subtree, ignoring drawers.

:PROPERTIES: :CUSTOM_ID: org-set-visibility-according-to-property :END:

org-agenda-phases-of-moon

Switch subtree visibilities according to :VISIBILITY: property.

:PROPERTIES: :CUSTOM_ID: org-agenda-phases-of-moon :END:

orgtbl-mode (&optional arg)

Display the phases of the moon for the 3 months around the cursor date.

:PROPERTIES: :CUSTOM_ID: orgtbl-mode :END:

org-timer-item (&optional arg)

The `org-mode' table editor as a minor mode for use in other modes.

:PROPERTIES: :CUSTOM_ID: org-timer-item :END:

org-agenda-do-date-later (arg)

Insert a description-type item with the current timer value.

:PROPERTIES: :CUSTOM_ID: org-agenda-do-date-later :END:

org-agenda-undo

:PROPERTIES: :CUSTOM_ID: org-agenda-undo :END:

org-agenda-todo-previousset

Undo a remote editing step in the agenda.
This undoes changes both in the agenda buffer and in the remote buffer
that have been changed along.

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-previousset :END:

org-end-of-item-list

Switch TODO entry to previous sequence.

:PROPERTIES: :CUSTOM_ID: org-end-of-item-list :END:

org-footnote-new

Go to the end of the current list or sublist.
Throw an error when not in a list.

:PROPERTIES: :CUSTOM_ID: org-footnote-new :END:

org-feed-update-all

Insert a new footnote.
This command prompts for a label.  If this is a label referencing an
existing label, only insert the label.  If the footnote label is empty
or new, let the user edit the definition of the footnote.

:PROPERTIES: :CUSTOM_ID: org-feed-update-all :END:

org-agenda-month-view (&optional month)

Get inbox items from all feeds in `org-feed-alist'.

:PROPERTIES: :CUSTOM_ID: org-agenda-month-view :END:

org-html-convert-region-to-html

Switch to monthly view for agenda.
With argument MONTH, switch to that month.

:PROPERTIES: :CUSTOM_ID: org-html-convert-region-to-html :END:

org-babel-tangle-clean

Assume the current region has org-mode syntax, and convert it to HTML.
This can be used in any buffer.  For example, you can write an
itemized list in org-mode syntax in an HTML buffer and use this
command to convert it.

:PROPERTIES: :CUSTOM_ID: org-babel-tangle-clean :END:

org-table-fedit-lisp-indent

Remove comments inserted by `org-babel-tangle'.
Call this function inside of a source-code file generated by
`org-babel-tangle' to remove all comments inserted automatically
by `org-babel-tangle'.  Warning, this comment removes any lines
containing constructs which resemble org-mode file links or noweb
references.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-lisp-indent :END:

org-columns-display-here (&optional props dateline)

Pretty-print and re-indent Lisp expressions in the Formula Editor.

:PROPERTIES: :CUSTOM_ID: org-columns-display-here :END:

org-columns-quit

Overlay the current line with column display.

:PROPERTIES: :CUSTOM_ID: org-columns-quit :END:

orgtbl-insert-radio-table

Remove the column overlays and in this way exit column editing.

:PROPERTIES: :CUSTOM_ID: orgtbl-insert-radio-table :END:

org-shiftleft (&optional arg)

Insert a radio table template appropriate for this major mode.

:PROPERTIES: :CUSTOM_ID: org-shiftleft :END:

  • Access: <S-left>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Previous keyword>, <menu-bar> <Org> <Dates and Scheduling> <Change Date> <1 Day Earlier>
  • In file: org.el
  • Find modifications in git logs

org-resolve-clocks (&optional only-dangling-p prompt-fn last-valid)

Cycle the thing at point or in the current line, depending on context.
Depending on context, this does one of the following:

- switch a timestamp at point one day into the past
- on a headline, switch to the previous TODO keyword.
- on an item, switch entire list to the previous bullet type
- on a property line, switch to the previous allowed value
- on a clocktable definition line, move time block into the past

:PROPERTIES: :CUSTOM_ID: org-resolve-clocks :END:

org-agenda-limit-interactively

Resolve all currently open org-mode clocks.
If `only-dangling-p' is non-nil, only ask to resolve dangling
(i.e., not currently open and valid) clocks.

:PROPERTIES: :CUSTOM_ID: org-agenda-limit-interactively :END:

org-open-at-point-global

In agenda, interactively limit entries to various maximums.

:PROPERTIES: :CUSTOM_ID: org-open-at-point-global :END:

org-export-visible (type arg)

Follow a link like Org-mode does.
This command can be called in any mode to follow a link that has
Org-mode syntax.

:PROPERTIES: :CUSTOM_ID: org-export-visible :END:

org-publish (project &optional force async)

Create a copy of the visible part of the current buffer, and export it.
The copy is created in a temporary buffer and removed after use.
TYPE is the final key (as a string) that also selects the export command in
the M-x org-export export dispatcher.
As a special case, if the you type SPC at the prompt, the temporary
org-mode file will not be removed but presented to you so that you can
continue to use it.  The prefix arg ARG is passed through to the exporting
command.

:PROPERTIES: :CUSTOM_ID: org-publish :END:

org-return (&optional indent)

Publish PROJECT.

PROJECT is either a project name, as a string, or a project
alist (see `org-publish-project-alist' variable).

When optional argument FORCE is non-nil, force publishing all
files in PROJECT.  With a non-nil optional argument ASYNC,
publishing will be done asynchronously, in another process.

:PROPERTIES: :CUSTOM_ID: org-return :END:

org-ctags-visit-buffer-or-file (name &optional create)

Goto next table row or insert a newline.
Calls `org-table-next-row' or `newline', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-ctags-visit-buffer-or-file :END:

org-export-stack-view (&optional in-emacs)

This function is intended to be used in ORG-OPEN-LINK-FUNCTIONS.
Visit buffer named `NAME.org'.  If there is no such buffer, visit the file
with the same name if it exists.  If the file does not exist, then behavior
depends on the value of CREATE.

If CREATE is nil (default), then return nil.  Do not create a new file.
If CREATE is t, create the new file and visit it.
If CREATE is the symbol `ask', then ask the user if they wish to create
the new file.

:PROPERTIES: :CUSTOM_ID: org-export-stack-view :END:

org-mode-restart

View export results at point in stack.
With an optional prefix argument IN-EMACS, force viewing files
within Emacs.

:PROPERTIES: :CUSTOM_ID: org-mode-restart :END:

org-table-sum (&optional beg end nlast)

Restart Org-mode, to scan again for special lines.
Also updates the keyword regular expressions.

:PROPERTIES: :CUSTOM_ID: org-table-sum :END:

org-babel-switch-to-session (&optional arg info)

Sum numbers in region of current table column.
The result will be displayed in the echo area, and will be available
as kill to be inserted with .

If there is an active region, it is interpreted as a rectangle and all
numbers in that rectangle will be summed.  If there is no active
region and point is located in a table column, sum all numbers in that
column.

If at least one number looks like a time HH:MM or HH:MM:SS, all other
numbers are assumed to be times as well (in decimal hours) and the
numbers are added as such.

If NLAST is a number, only the NLAST fields will actually be summed.

:PROPERTIES: :CUSTOM_ID: org-babel-switch-to-session :END:

org-bibtex (&optional filename)

Switch to the session of the current code block.
Uses `org-babel-initiate-session' to start the session.  If called
with a prefix argument then this is passed on to
`org-babel-initiate-session'.

:PROPERTIES: :CUSTOM_ID: org-bibtex :END:

org-cycle-level

Export each headline in the current file to a bibtex entry.
Headlines are exported using `org-bibtex-export-headline'.

:PROPERTIES: :CUSTOM_ID: org-cycle-level :END:

org-table-insert-row (&optional arg)

Cycle the level of an empty headline through possible states.
This goes first to child, then to parent, level, then up the hierarchy.
After top level, it switches back to sibling level.

:PROPERTIES: :CUSTOM_ID: org-table-insert-row :END:

org-agenda-date-later-hours (arg)

Insert a new row above the current line into the table.
With prefix ARG, insert below the current line.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-later-hours :END:

org-attach-set-inherit

Change the time of this item, in hour steps.

:PROPERTIES: :CUSTOM_ID: org-attach-set-inherit :END:

org-mobile-create-sumo-agenda

Set the ATTACH_DIR_INHERIT property of the current entry.
The property defines the directory that is used for attachments
of the entry and any children that do not explicitly define (by setting
the ATTACH_DIR property) their own attachment directory.

:PROPERTIES: :CUSTOM_ID: org-mobile-create-sumo-agenda :END:

org-bibtex-create (&optional arg nonew)

Create a file that contains all custom agenda views.

:PROPERTIES: :CUSTOM_ID: org-bibtex-create :END:

org-table-toggle-coordinate-overlays

Create a new entry at the given level.
With a prefix arg, query for optional fields as well.
If nonew is t, add data to the headline of the entry at point.

:PROPERTIES: :CUSTOM_ID: org-table-toggle-coordinate-overlays :END:

Toggle the display of Row/Column numbers in tables.

:PROPERTIES: :CUSTOM_ID: org-next-link :END:

org-remove-inline-images

Move forward to the next link.
If the link is in hidden text, expose it.

:PROPERTIES: :CUSTOM_ID: org-remove-inline-images :END:

org-agenda-switch-to (&optional delete-other-windows)

Remove inline display of images.

:PROPERTIES: :CUSTOM_ID: org-agenda-switch-to :END:

org-table-calc-current-TBLFM (&optional arg)

Go to the Org-mode file which contains the item at point.

:PROPERTIES: :CUSTOM_ID: org-table-calc-current-TBLFM :END:

org-paste-subtree (&optional level tree for-yank)

Apply the #+TBLFM in the line at point to the table.

:PROPERTIES: :CUSTOM_ID: org-paste-subtree :END:

org-agenda-toggle-time-grid

Paste the clipboard as a subtree, with modification of headline level.
The entire subtree is promoted or demoted in order to match a new headline
level.

If the cursor is at the beginning of a headline, the same level as
that headline is used to paste the tree.

If not, the new level is derived from the *visible* headings
before and after the insertion point, and taken to be the inferior headline
level of the two.  So if the previous visible heading is level 3 and the
next is level 4 (or vice versa), level 4 will be used for insertion.
This makes sure that the subtree remains an independent subtree and does
not swallow low level entries.

You can also force a different level, either by using a numeric prefix
argument, or by inserting the heading marker by hand.  For example, if the
cursor is after "*****", then the tree will be shifted to level 5.

If optional TREE is given, use this text instead of the kill ring.

When FOR-YANK is set, this is called by `org-yank'.  In this case, do not
move back over whitespace before inserting, and move point to the end of
the inserted text when done.

:PROPERTIES: :CUSTOM_ID: org-agenda-toggle-time-grid :END:

org-beamer-insert-options-template (&optional kind)

Toggle time grid in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-beamer-insert-options-template :END:

orgtbl-ctrl-c-ctrl-c (arg)

Insert a settings template, to make sure users do this right.

:PROPERTIES: :CUSTOM_ID: orgtbl-ctrl-c-ctrl-c :END:

org-id-get-create (&optional force)

If the cursor is inside a table, realign the table.
If it is a table to be sent away to a receiver, do it.
With prefix arg, also recompute table.

:PROPERTIES: :CUSTOM_ID: org-id-get-create :END:

org-create-math-formula (latex-frag &optional mathml-file)

Create an ID for the current entry and return it.
If the entry already has an ID, just return it.
With optional argument FORCE, force the creation of a new ID.

:PROPERTIES: :CUSTOM_ID: org-create-math-formula :END:

org-agenda-date-earlier-hours (arg)

Convert LATEX-FRAG to MathML and store it in MATHML-FILE.
Use `org-latex-to-mathml-convert-command'.  If the conversion is
sucessful, return the portion between " "
elements otherwise return nil.  When MATHML-FILE is specified,
write the results in to that file.  When invoked as an
interactive command, prompt for LATEX-FRAG, with initial value
set to the current active region and echo the results for user
inspection.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-earlier-hours :END:

org-ctags-find-tag-interactive

Change the time of this item, in hour steps.

:PROPERTIES: :CUSTOM_ID: org-ctags-find-tag-interactive :END:

org-cut-subtree (&optional n)

Prompt for the name of a tag, with autocompletion, then visit the named tag.
Uses `ido-mode' if available.
If the user enters a string that does not match an existing tag, create
a new topic.

:PROPERTIES: :CUSTOM_ID: org-cut-subtree :END:

org-agenda-archives-mode (&optional with-files)

Cut the current subtree into the clipboard.
With prefix arg N, cut this many sequential subtrees.
This is a short-hand for marking the subtree and then cutting it.

:PROPERTIES: :CUSTOM_ID: org-agenda-archives-mode :END:

org-export-blocks-preprocess

Toggle inclusion of items in trees marked with :ARCHIVE:.
When called with a prefix argument, include all archive files as well.

:PROPERTIES: :CUSTOM_ID: org-export-blocks-preprocess :END:

org-calendar-select-mouse (ev)

Export all blocks according to the `org-export-blocks' block export alist.
Does not export block types specified in specified in BLOCKS
which defaults to the value of `org-export-blocks-witheld'.

:PROPERTIES: :CUSTOM_ID: org-calendar-select-mouse :END:

org-agenda-entry-text-mode (&optional arg)

Return to `org-read-date' with the date currently selected.
This is used by `org-read-date' in a temporary keymap for the calendar buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-mode :END:

org-table-create-or-convert-from-region (arg)

Toggle entry text mode in an agenda buffer.

:PROPERTIES: :CUSTOM_ID: org-table-create-or-convert-from-region :END:

org-clock-menu

Convert region to table, or create an empty table.
If there is an active region, convert it to a table, using the function
`org-table-convert-region'.  See the documentation of that function
to learn how the prefix argument is interpreted to determine the field
separator.
If there is no such region, create an empty table with `org-table-create'.

:PROPERTIES: :CUSTOM_ID: org-clock-menu :END:

org-metadown (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-metadown :END:

org-table-eval-formula (&optional arg equation suppress-align suppress-const suppress-store suppress-analysis)

Move subtree down or move table row down.
Calls `org-move-subtree-down' or `org-table-move-row' or
`org-move-item-down', depending on context.  See the individual
commands for more information.

:PROPERTIES: :CUSTOM_ID: org-table-eval-formula :END:

org-open-line (n)

Replace the table field value at the cursor by the result of a calculation.

This function makes use of Dave Gillespie's Calc package, in my view the
most exciting program ever written for GNU Emacs.  So you need to have Calc
installed in order to use this function.

In a table, this command replaces the value in the current field with the
result of a formula.  It also installs the formula as the "current" column
formula, by storing it in a special line below the table.  When called
with a `C-u' prefix, the current field must be a named field, and the
formula is installed as valid in only this specific field.

When called with two `C-u' prefixes, insert the active equation
for the field back into the current field, so that it can be
edited there.  This is useful in order to use M-x org-table-show-reference
to check the referenced fields.

When called, the command first prompts for a formula, which is read in
the minibuffer.  Previously entered formulas are available through the
history list, and the last used formula is offered as a default.
These stored formulas are adapted correctly when moving, inserting, or
deleting columns with the corresponding commands.

The formula can be any algebraic expression understood by the Calc package.
For details, see the Org-mode manual.

This function can also be called from Lisp programs and offers
additional arguments: EQUATION can be the formula to apply.  If this
argument is given, the user will not be prompted.  SUPPRESS-ALIGN is
used to speed-up recursive calls by by-passing unnecessary aligns.
SUPPRESS-CONST suppresses the interpretation of constants in the
formula, assuming that this has been done already outside the function.
SUPPRESS-STORE means the formula should not be stored, either because
it is already stored, or because it is a modified equation that should
not overwrite the stored one.

:PROPERTIES: :CUSTOM_ID: org-open-line :END:

org-columns-todo (&optional arg)

Insert a new row in tables, call `open-line' elsewhere.

:PROPERTIES: :CUSTOM_ID: org-columns-todo :END:

org-clock-out (&optional switch-to-state fail-quietly at-time)

Change the TODO state during column view.

:PROPERTIES: :CUSTOM_ID: org-clock-out :END:

org-babel-pop-to-session (&optional arg info)

Stop the currently running clock.
Throw an error if there is no running clock and FAIL-QUIETLY is nil.
With a universal prefix, prompt for a state to switch the clocked out task
to, overriding the existing value of `org-clock-out-switch-to-state'.

:PROPERTIES: :CUSTOM_ID: org-babel-pop-to-session :END:

org-unindent-buffer

Switch to the session of the current code block.
Uses `org-babel-initiate-session' to start the session.  If called
with a prefix argument then this is passed on to
`org-babel-initiate-session'.

:PROPERTIES: :CUSTOM_ID: org-unindent-buffer :END:

org-table-previous-field

Un-indent the visible part of the buffer.
Relative indentation (between items, inside blocks, etc.) isn't
modified.

:PROPERTIES: :CUSTOM_ID: org-table-previous-field :END:

org-mobile-move-capture

Go to the previous field in the table.
Before doing so, re-align the table if necessary.

:PROPERTIES: :CUSTOM_ID: org-mobile-move-capture :END:

org-agenda-file-to-front (&optional to-end)

Move the contents of the capture file to the inbox file.
Return a marker to the location where the new content has been added.
If nothing new has been added, return nil.

:PROPERTIES: :CUSTOM_ID: org-agenda-file-to-front :END:

org-table-follow-field-mode (&optional arg)

Move/add the current file to the top of the agenda file list.
If the file is not present in the list, it is added to the front.  If it is
present, it is moved there.  With optional argument TO-END, add/move to the
end of the list.

:PROPERTIES: :CUSTOM_ID: org-table-follow-field-mode :END:

org-edit-agenda-file-list

Minor mode to make the table field editor window follow the cursor.
When this mode is active, the field editor window will always show the
current field.  The mode exits automatically when the cursor leaves the
table (but see `org-table-exit-follow-field-mode-when-leaving-table').

:PROPERTIES: :CUSTOM_ID: org-edit-agenda-file-list :END:

org-mouse-remove-match-and-spaces

Edit the list of agenda files.
Depending on setup, this either uses customize to edit the variable
`org-agenda-files', or it visits the file that is holding the list.  In the
latter case, the buffer is set up in a way that saving it automatically kills
the buffer and restores the previous window configuration.

:PROPERTIES: :CUSTOM_ID: org-mouse-remove-match-and-spaces :END:

org-table-insert-column

Remove the match, make just one space around the point.

:PROPERTIES: :CUSTOM_ID: org-table-insert-column :END:

org-clock-update-time-maybe

Insert a new column into the table.

:PROPERTIES: :CUSTOM_ID: org-clock-update-time-maybe :END:

org-ctags-open-file (name &optional title)

If this is a CLOCK line, update it and return t.
Otherwise, return nil.

:PROPERTIES: :CUSTOM_ID: org-ctags-open-file :END:

org-at-date-range-p (&optional inactive-ok)

Visit or create a file called `NAME.org', and insert a new topic.
The new topic will be titled NAME (or TITLE if supplied).

:PROPERTIES: :CUSTOM_ID: org-at-date-range-p :END:

org-agenda-set-tags (&optional tag onoff)

Is the cursor inside a date range?

:PROPERTIES: :CUSTOM_ID: org-agenda-set-tags :END:

org-smart-reschedule (quality)

Set tags for the current headline.

:PROPERTIES: :CUSTOM_ID: org-smart-reschedule :END:

org-latex-convert-region-to-latex

:PROPERTIES: :CUSTOM_ID: org-latex-convert-region-to-latex :END:

org-rss-export-as-rss (&optional async subtreep visible-only)

Assume the current region has org-mode syntax, and convert it to LaTeX.
This can be used in any buffer.  For example, you can write an
itemized list in org-mode syntax in an LaTeX buffer and use this
command to convert it.

:PROPERTIES: :CUSTOM_ID: org-rss-export-as-rss :END:

org-attach-open (&optional in-emacs)

Export current buffer to a RSS buffer.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting buffer should be accessible
through the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

Export is done in a buffer named "*Org RSS Export*", which will
be displayed when `org-export-show-temporary-export-buffer' is
non-nil.

:PROPERTIES: :CUSTOM_ID: org-attach-open :END:

org-agenda-show-and-scroll-up (&optional arg)

Open an attachment of the current task.
If there are more than one attachment, you will be prompted for the file name.
This command will open the file using the settings in `org-file-apps'
and in the system-specific variants of this variable.
If IN-EMACS is non-nil, force opening in Emacs.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-and-scroll-up :END:

org-calendar-goto-agenda

Display the Org-mode file which contains the item at point.
When called repeatedly, scroll the window that is displaying the buffer.
With a C-u prefix, use `org-show-entry' instead of
`show-subtree' to display the item, so that drawers and logbooks stay
folded.

:PROPERTIES: :CUSTOM_ID: org-calendar-goto-agenda :END:

org-update-all-dblocks

Compute the Org-mode agenda for the calendar date displayed at the cursor.
This is a command that has to be installed in `calendar-mode-map'.

:PROPERTIES: :CUSTOM_ID: org-update-all-dblocks :END:

org-capture-kill

Update all dynamic blocks in the buffer.
This function can be used in a hook.

:PROPERTIES: :CUSTOM_ID: org-capture-kill :END:

org-table-move-column-left

Abort the current capture process.

:PROPERTIES: :CUSTOM_ID: org-table-move-column-left :END:

org-agenda-clock-out

Move column to the left.

:PROPERTIES: :CUSTOM_ID: org-agenda-clock-out :END:

org-babel-hash-at-point (&optional point)

Stop the currently running clock.

:PROPERTIES: :CUSTOM_ID: org-babel-hash-at-point :END:

org-goto-ret (&optional arg)

Return the value of the hash at POINT.
The hash is also added as the last element of the kill ring.
This can be called with C-c C-c.

:PROPERTIES: :CUSTOM_ID: org-goto-ret :END:

Finish `org-goto' by going to the new location.

:PROPERTIES: :CUSTOM_ID: org-agenda-open-link :END:

org-match-sparse-tree (&optional todo-only match)

Open the link(s) in the current entry, if any.
This looks for a link in the displayed line in the agenda.
It also looks at the text of the entry itself.

:PROPERTIES: :CUSTOM_ID: org-match-sparse-tree :END:

org-timer-cancel-timer

Create a sparse tree according to tags string MATCH.
MATCH can contain positive and negative selection of tags, like
"+WORK+URGENT-WITHBOSS".
If optional argument TODO-ONLY is non-nil, only select lines that are
also TODO lines.

:PROPERTIES: :CUSTOM_ID: org-timer-cancel-timer :END:

org-delete-char (N)

Cancel the current timer.

:PROPERTIES: :CUSTOM_ID: org-delete-char :END:

org-src-associate-babel-session (info)

Like `delete-char', but insert whitespace at field end in tables.
When deleting characters, in tables this function will insert whitespace in
front of the next "|" separator, to keep the table aligned.  The table will
still be marked for re-alignment if the field did fill the entire column,
because, in this case the deletion might narrow the column.

:PROPERTIES: :CUSTOM_ID: org-src-associate-babel-session :END:

org-agenda-previous-item (n)

Associate edit buffer with comint session.

:PROPERTIES: :CUSTOM_ID: org-agenda-previous-item :END:

org-babel-hide-result-toggle-maybe

Move cursor to next agenda item.

:PROPERTIES: :CUSTOM_ID: org-babel-hide-result-toggle-maybe :END:

org-mouse-show-headlines

Toggle visibility of result at point.

:PROPERTIES: :CUSTOM_ID: org-mouse-show-headlines :END:

org-feed-show-raw-feed (feed)

Change the visibility of the current org buffer to only show headlines.

:PROPERTIES: :CUSTOM_ID: org-feed-show-raw-feed :END:

org-require-autoloaded-modules

Show the raw feed buffer of a feed.

:PROPERTIES: :CUSTOM_ID: org-require-autoloaded-modules :END:

org-move-subtree-down (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-move-subtree-down :END:

org-agenda-show-scroll-down

Move the current subtree down past ARG headlines of the same level.

:PROPERTIES: :CUSTOM_ID: org-agenda-show-scroll-down :END:

org-end-of-item

Scroll down the window showing the agenda.

:PROPERTIES: :CUSTOM_ID: org-end-of-item :END:

Go to the end of the current item.
Throw an error when not in a list.

:PROPERTIES: :CUSTOM_ID: org-previous-link :END:

org-export-htmlize-generate-css

Move backward to the previous link.
If the link is in hidden text, expose it.

:PROPERTIES: :CUSTOM_ID: org-export-htmlize-generate-css :END:

org-speedbar-set-agenda-restriction

Create the CSS for all font definitions in the current Emacs session.
Use this to create face definitions in your CSS style file that can then
be used by code snippets transformed by htmlize.
This command just produces a buffer that contains class definitions for all
faces used in the current Emacs session.  You can copy and paste the ones you
need into your CSS file.

If you then set `org-export-htmlize-output-type' to `css', calls to
the function `org-export-htmlize-region-for-paste' will produce code
that uses these same face definitions.

:PROPERTIES: :CUSTOM_ID: org-speedbar-set-agenda-restriction :END:

org-agenda-todo-yesterday (&optional arg)

Restrict future agenda commands to the location at point in speedbar.
To get rid of the restriction, use C-c C-x >.

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-yesterday :END:

org-agenda-kill

Like `org-agenda-todo' but the time of change will be 23:59 of yesterday.

:PROPERTIES: :CUSTOM_ID: org-agenda-kill :END:

org-babel-exp-process-buffer

Kill the entry or subtree belonging to the current agenda entry.

:PROPERTIES: :CUSTOM_ID: org-babel-exp-process-buffer :END:

org-goto-right

Execute all blocks in visible part of buffer.

:PROPERTIES: :CUSTOM_ID: org-goto-right :END:

org-reload (&optional uncompiled)

Finish `org-goto' by going to the new location.

:PROPERTIES: :CUSTOM_ID: org-reload :END:

org-list-make-subtree

Reload all org lisp files.
With prefix arg UNCOMPILED, load the uncompiled versions.

:PROPERTIES: :CUSTOM_ID: org-list-make-subtree :END:

org-table-fedit-finish (&optional arg)

Convert the plain list at point into a subtree.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-finish :END:

org-mouse-insert-heading

Parse the buffer for formula definitions and install them.
With prefix ARG, apply the new formulas to the table.

:PROPERTIES: :CUSTOM_ID: org-mouse-insert-heading :END:

org-clock-select-task (&optional prompt)

Insert a new heading, as `org-insert-heading'.

If the point is at the :beginning (`org-mouse-line-position') of the line,
insert the new heading before the current line.  Otherwise, insert it
after the current heading.

:PROPERTIES: :CUSTOM_ID: org-clock-select-task :END:

org-reftex-citation

Select a task that was recently associated with clocking.

:PROPERTIES: :CUSTOM_ID: org-reftex-citation :END:

org-agenda-manipulate-query-add-re

Use reftex-citation to insert a citation into the buffer.
This looks for a line like

#+BIBLIOGRAPHY: foo plain option:-d

and derives from it that foo.bib is the bibliography file relevant
for this document.  It then installs the necessary environment for RefTeX
to work in this buffer and calls `reftex-citation'  to insert a citation
into the buffer.

Export of such citations to both LaTeX and HTML is handled by the contributed
package ox-bibtex by Taru Karttunen.

:PROPERTIES: :CUSTOM_ID: org-agenda-manipulate-query-add-re :END:

org-calendar-select

Manipulate the query by adding a search regexp with positive selection.
Positive selection means the regexp must match for selection of an entry.

:PROPERTIES: :CUSTOM_ID: org-calendar-select :END:

org-open-at-mouse (ev)

Return to `org-read-date' with the date currently selected.
This is used by `org-read-date' in a temporary keymap for the calendar buffer.

:PROPERTIES: :CUSTOM_ID: org-open-at-mouse :END:

org-babel-goto-named-src-block (name)

Open file link or URL at mouse.
See the docstring of `org-open-file' for details.

:PROPERTIES: :CUSTOM_ID: org-babel-goto-named-src-block :END:

org-attach-delete-all (&optional force)

Go to a named source-code block.

:PROPERTIES: :CUSTOM_ID: org-attach-delete-all :END:

org-src-tangle (arg)

Delete all attachments from the current task.
This actually deletes the entire attachment directory.
A safer way is to open the directory in dired and delete from there.

:PROPERTIES: :CUSTOM_ID: org-src-tangle :END:

org-shiftright (&optional arg)

Tangle the parent buffer.

:PROPERTIES: :CUSTOM_ID: org-shiftright :END:

  • Access: <S-right>, <menu-bar> <Org> <TODO Lists> <Select keyword> <Next keyword>, <menu-bar> <Org> <Dates and Scheduling> <Change Date> <1 Day Later>
  • In file: org.el
  • Find modifications in git logs

org-table-toggle-formula-debugger

Cycle the thing at point or in the current line, depending on context.
Depending on context, this does one of the following:

- switch a timestamp at point one day into the future
- on a headline, switch to the next TODO keyword.
- on an item, switch entire list to the next bullet type
- on a property line, switch to the next allowed value
- on a clocktable definition line, move time block into the future

:PROPERTIES: :CUSTOM_ID: org-table-toggle-formula-debugger :END:

org-table-edit-formulas

Toggle the formula debugger in tables.

:PROPERTIES: :CUSTOM_ID: org-table-edit-formulas :END:

org-get-tags-at (&optional pos local)

Edit the formulas of the current table in a separate buffer.

:PROPERTIES: :CUSTOM_ID: org-get-tags-at :END:

org-toggle-fixed-width-section (arg)

Get a list of all headline tags applicable at POS.
POS defaults to point.  If tags are inherited, the list contains
the targets in the same sequence as the headlines appear, i.e.
the tags of the current headline come last.
When LOCAL is non-nil, only return tags from the current headline,
ignore inherited ones.

:PROPERTIES: :CUSTOM_ID: org-toggle-fixed-width-section :END:

org-agenda-later (arg)

Toggle the fixed-width export.
If there is no active region, the QUOTE keyword at the current headline is
inserted or removed.  When present, it causes the text between this headline
and the next to be exported as fixed-width text, and unmodified.
If there is an active region, this command adds or removes a colon as the
first character of this line.  If the first character of a line is a colon,
this line is also exported in fixed-width font.

:PROPERTIES: :CUSTOM_ID: org-agenda-later :END:

org-priority (&optional action show)

Go forward in time by the current span.
With prefix ARG, go forward that many times the current span.

:PROPERTIES: :CUSTOM_ID: org-priority :END:

org-timeline (&optional dotodo)

Change the priority of an item.
ACTION can be `set', `up', `down', or a character.

:PROPERTIES: :CUSTOM_ID: org-timeline :END:

org-forward-sentence (&optional arg)

Show a time-sorted view of the entries in the current org file.
Only entries with a time stamp of today or later will be listed.  With
C-u prefix, all unfinished TODO items will also be shown,
under the current date.
If the buffer contains an active region, only check the region for
dates.

:PROPERTIES: :CUSTOM_ID: org-forward-sentence :END:

org-meta-return (&optional arg)

Go to end of sentence, or end of table field.
This will call `forward-sentence' or `org-table-end-of-field',
depending on context.

:PROPERTIES: :CUSTOM_ID: org-meta-return :END:

org-set-property-and-value (use-last)

Insert a new heading or wrap a region in a table.
Calls `org-insert-heading' or `org-table-wrap-region', depending on context.
See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-set-property-and-value :END:

org-indent-drawer

Allow to set [PROPERTY]: [value] direction from prompt.
When use-default, don't even ask, just use the last
"[PROPERTY]: [value]" string from the history.

:PROPERTIES: :CUSTOM_ID: org-indent-drawer :END:

org-unescape-code-in-region (beg end)

Indent the drawer at point.

:PROPERTIES: :CUSTOM_ID: org-unescape-code-in-region :END:

org-find-entry-with-id (ident)

Un-escape lines between BEG and END.
Un-escaping happens by removing the first comma on lines starting
with ",*", ",#+", ",,*" and ",,#+".

:PROPERTIES: :CUSTOM_ID: org-find-entry-with-id :END:

org-table-transpose-table-at-point

Locate the entry that contains the ID property with exact value IDENT.
IDENT can be a string, a symbol or a number, this function will search for
the string representation of it.
Return the position where this entry starts, or nil if there is no such entry.

:PROPERTIES: :CUSTOM_ID: org-table-transpose-table-at-point :END:

org-org-menu (event)

Transpose orgmode table at point and eliminate hlines.
So a table like

| 1 | 2 | 4 | 5 |
|---+---+---+---|
| a | b | c | d |
| e | f | g | h |

will be transposed as

| 1 | a | e |
| 2 | b | f |
| 4 | c | g |
| 5 | d | h |

Note that horizontal lines disappeared.

:PROPERTIES: :CUSTOM_ID: org-org-menu :END:

org-columns-set-tags-or-toggle (&optional arg)

Org menu

:PROPERTIES: :CUSTOM_ID: org-columns-set-tags-or-toggle :END:

org-table-fedit-toggle-coordinates

Toggle checkbox at point, or set tags for current headline.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-toggle-coordinates :END:

org-search-view (&optional todo-only string edit-at)

Toggle the display of coordinates in the referenced table.

:PROPERTIES: :CUSTOM_ID: org-search-view :END:

org-agenda-filter-by-tag (strip &optional char narrow)

Show all entries that contain a phrase or words or regular expressions.

With optional prefix argument TODO-ONLY, only consider entries that are
TODO entries.  The argument STRING can be used to pass a default search
string into this function.  If EDIT-AT is non-nil, it means that the
user should get a chance to edit this string, with cursor at position
EDIT-AT.

The search string can be viewed either as a phrase that should be found as
is, or it can be broken into a number of snippets, each of which must match
in a Boolean way to select an entry.  The default depends on the variable
`org-agenda-search-view-always-boolean'.
Even if this is turned off (the default) you can always switch to
Boolean search dynamically by preceding the first word with  "+" or "-".

The default is a direct search of the whole phrase, where each space in
the search string can expand to an arbitrary amount of whitespace,
including newlines.

If using a Boolean search, the search string is split on whitespace and
each snippet is searched separately, with logical AND to select an entry.
Words prefixed with a minus must *not* occur in the entry.  Words without
a prefix or prefixed with a plus must occur in the entry.  Matching is
case-insensitive.  Words are enclosed by word delimiters (i.e. they must
match whole words, not parts of a word) if
`org-agenda-search-view-force-full-words' is set (default is nil).

Boolean search snippets enclosed by curly braces are interpreted as
regular expressions that must or (when preceded with "-") must not
match in the entry.  Snippets enclosed into double quotes will be taken
as a whole, to include whitespace.

- If the search string starts with an asterisk, search only in headlines.
- If (possibly after the leading star) the search string starts with an
  exclamation mark, this also means to look at TODO entries only, an effect
  that can also be achieved with a prefix argument.
- If (possibly after star and exclamation mark) the search string starts
  with a colon, this will mean that the (non-regexp) snippets of the
  Boolean search must match as full words.

This command searches the agenda files, and in addition the files listed
in `org-agenda-text-search-extra-files'.

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-by-tag :END:

org-table-current-column

Keep only those lines in the agenda buffer that have a specific tag.
The tag is selected with its fast selection letter, as configured.
With prefix argument STRIP, remove all lines that do have the tag.
A lisp caller can specify CHAR.  NARROW means that the new tag should be
used to narrow the search - the interactive user can also press `-' or `+'
to switch to narrowing.

:PROPERTIES: :CUSTOM_ID: org-table-current-column :END:

org-check-dates-range (start-date end-date)

Find out which column we are in.

:PROPERTIES: :CUSTOM_ID: org-check-dates-range :END:

org-agenda-view-mode-dispatch

Check for deadlines/scheduled entries between START-DATE and END-DATE.

:PROPERTIES: :CUSTOM_ID: org-agenda-view-mode-dispatch :END:

org-update-radio-target-regexp

Call one of the view mode commands.

:PROPERTIES: :CUSTOM_ID: org-update-radio-target-regexp :END:

org-ctrl-c-ret

Find all radio targets in this file and update the regular expression.

:PROPERTIES: :CUSTOM_ID: org-ctrl-c-ret :END:

org-beamer-mode (&optional arg)

Call `org-table-hline-and-move' or `org-insert-heading' dep. on context.

:PROPERTIES: :CUSTOM_ID: org-beamer-mode :END:

org-open-at-point (&optional arg reference-buffer)

Support for editing Beamer oriented Org mode files.

:PROPERTIES: :CUSTOM_ID: org-open-at-point :END:

org-table-fedit-scroll (N)

:around advice: `ad-Advice-org-open-at-point'

Open link at or after point.
If there is no link at point, this function will search forward up to
the end of the current line.
Normally, files will be opened by an appropriate application.  If the
optional prefix argument ARG is non-nil, Emacs will visit the file.
With a double prefix argument, try to open outside of Emacs, in the
application the system uses for this file type.

(fn &optional ARG REFERENCE-BUFFER)

:PROPERTIES: :CUSTOM_ID: org-table-fedit-scroll :END:

org-schedule (arg &optional time)

:PROPERTIES: :CUSTOM_ID: org-schedule :END:

org-goto-quit

Insert the SCHEDULED: string with a timestamp to schedule a TODO item.
With one universal prefix argument, remove any scheduling date from the item.
With two universal prefix arguments, prompt for a delay cookie.
With argument TIME, scheduled at the corresponding date.  TIME can
either be an Org date like "2011-07-24" or a delta like "+2d".

:PROPERTIES: :CUSTOM_ID: org-goto-quit :END:

org-agenda-toggle-archive-tag

Finish `org-goto' without cursor motion.

:PROPERTIES: :CUSTOM_ID: org-agenda-toggle-archive-tag :END:

org-babel-previous-src-block (&optional arg)

Toggle the archive tag for the current entry.

:PROPERTIES: :CUSTOM_ID: org-babel-previous-src-block :END:

org-mouse-timestamp-today (&optional shift units)

Jump to the previous source block.
With optional prefix argument ARG, jump backward ARG many source blocks.

:PROPERTIES: :CUSTOM_ID: org-mouse-timestamp-today :END:

org-narrow-to-element

Change the timestamp into SHIFT UNITS in the future.

For the acceptable UNITS, see `org-timestamp-change'.

:PROPERTIES: :CUSTOM_ID: org-narrow-to-element :END:

org-babel-remove-result (&optional info)

Narrow buffer to current element.

:PROPERTIES: :CUSTOM_ID: org-babel-remove-result :END:

org-tags-sparse-tree (&optional todo-only match)

Remove the result of the current source block.

:PROPERTIES: :CUSTOM_ID: org-tags-sparse-tree :END:

org-export-stack-clear

Create a sparse tree according to tags string MATCH.
MATCH can contain positive and negative selection of tags, like
"+WORK+URGENT-WITHBOSS".
If optional argument TODO-ONLY is non-nil, only select lines that are
also TODO lines.

:PROPERTIES: :CUSTOM_ID: org-export-stack-clear :END:

org-move-item-up

Remove all entries from export stack.

:PROPERTIES: :CUSTOM_ID: org-move-item-up :END:

org-agenda-bulk-action (&optional arg)

Move the item at point up, i.e. swap with previous item.
Sub-items (items with larger indentation) are considered part of
the item, so this really moves item trees.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-action :END:

org-table-fedit-line-down

Execute an remote-editing action on all marked entries.
The prefix arg is passed through to the command if possible.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-line-down :END:

org-shiftdown (&optional arg)

Move cursor one line down in the window showing the table.

:PROPERTIES: :CUSTOM_ID: org-shiftdown :END:

  • Access: <S-down>, <menu-bar> <Org> <TODO Lists> <Priority Down>, <menu-bar> <Org> <Dates and Scheduling> <Change Date> <1 ... Earlier>
  • In file: org.el
  • Find modifications in git logs

org-redisplay-inline-images

Decrease item in timestamp or decrease priority of current headline.
Calls `org-timestamp-down' or `org-priority-down', or `org-next-item'
depending on context.  See the individual commands for more information.

:PROPERTIES: :CUSTOM_ID: org-redisplay-inline-images :END:

org-babel-execute-maybe

Refresh the display of inline images.

:PROPERTIES: :CUSTOM_ID: org-babel-execute-maybe :END:

org-columns-content

:PROPERTIES: :CUSTOM_ID: org-columns-content :END:

org-narrow-to-subtree

Switch to contents view while in columns view.

:PROPERTIES: :CUSTOM_ID: org-narrow-to-subtree :END:

org-delete-backward-char (N)

Narrow buffer to the current subtree.

:PROPERTIES: :CUSTOM_ID: org-delete-backward-char :END:

org-mouse-transform-to-outline

Like `delete-backward-char', insert whitespace at field end in tables.
When deleting backwards, in tables this function will insert whitespace in
front of the next "|" separator, to keep the table aligned.  The table will
still be marked for re-alignment if the field did fill the entire column,
because, in this case the deletion might narrow the column.

:PROPERTIES: :CUSTOM_ID: org-mouse-transform-to-outline :END:

org-agenda-add-note (&optional arg)

:PROPERTIES: :CUSTOM_ID: org-agenda-add-note :END:

org-ibuffer

Add a time-stamped note to the entry at point.

:PROPERTIES: :CUSTOM_ID: org-ibuffer :END:

org-columns-narrow (arg)

Open an `ibuffer' window showing only `org-mode' buffers.

:PROPERTIES: :CUSTOM_ID: org-columns-narrow :END:

org-mouse-end-headline

Make the column narrower by ARG characters.

:PROPERTIES: :CUSTOM_ID: org-mouse-end-headline :END:

org-timer-stop

Go to the end of current headline (ignoring tags).

:PROPERTIES: :CUSTOM_ID: org-timer-stop :END:

org-babel-load-in-session-maybe

Stop the relative timer.

:PROPERTIES: :CUSTOM_ID: org-babel-load-in-session-maybe :END:

org-attach-set-directory

Conditionally load a source block in a session.
Detect if this is context for a org-babel src-block and if so
then run `org-babel-load-in-session'.

:PROPERTIES: :CUSTOM_ID: org-attach-set-directory :END:

org-table-blank-field

Set the ATTACH_DIR property of the current entry.
The property defines the directory that is used for attachments
of the entry.

:PROPERTIES: :CUSTOM_ID: org-table-blank-field :END:

org-bibtex-export-to-kill-ring

Blank the current table field or active region.

:PROPERTIES: :CUSTOM_ID: org-bibtex-export-to-kill-ring :END:

org-inc-effort

Export current headline to kill ring as bibtex entry.

:PROPERTIES: :CUSTOM_ID: org-inc-effort :END:

org-mouse-insert-checkbox

Increment the value of the effort property in the current entry.

:PROPERTIES: :CUSTOM_ID: org-mouse-insert-checkbox :END:

:PROPERTIES: :CUSTOM_ID: org-store-link :END:

org-agenda-deadline (arg &optional time)

Store an org-link to the current location.
This link is added to `org-stored-links' and can later be inserted
into an org-buffer with C-c C-l.

For some link types, a prefix arg is interpreted.
For links to Usenet articles, arg negates `org-gnus-prefer-web-links'.
For file links, arg negates `org-context-in-file-links'.

A double prefix arg force skipping storing functions that are not
part of Org's core.

A triple prefix arg force storing a link for each line in the
active region.

:PROPERTIES: :CUSTOM_ID: org-agenda-deadline :END:

org-agenda-bulk-unmark (&optional arg)

Schedule the item at point.
ARG is passed through to `org-deadline'.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-unmark :END:

org-export-as-org (arg &optional ext-plist to-buffer body-only pub-dir)

Unmark the entry at point for future bulk action.

:PROPERTIES: :CUSTOM_ID: org-export-as-org :END:

org-table-iterate-buffer-tables

Make a copy with not-exporting stuff removed.
The purpose of this function is to provide a way to export the source
Org file of a webpage in Org format, but with sensitive and/or irrelevant
stuff removed.  This command will remove the following:

- archived trees (if the variable `org-export-with-archived-trees' is nil)
- comment blocks and trees starting with the COMMENT keyword
- only trees that are consistent with `org-export-select-tags'
  and `org-export-exclude-tags'.

The only arguments that will be used are EXT-PLIST and PUB-DIR,
all the others will be ignored (but are present so that the general
mechanism to call publishing functions will work).

EXT-PLIST is a property list with external parameters overriding
org-mode's default settings, but still inferior to file-local
settings.  When PUB-DIR is set, use this as the publishing
directory.

:PROPERTIES: :CUSTOM_ID: org-table-iterate-buffer-tables :END:

org-table-hline-and-move (&optional same-column)

Iterate all tables in the buffer, to converge inter-table dependencies.

:PROPERTIES: :CUSTOM_ID: org-table-hline-and-move :END:

org-list-repair

Insert a hline and move to the row below that line.

:PROPERTIES: :CUSTOM_ID: org-list-repair :END:

org-evaluate-time-range (&optional to-buffer)

Fix indentation, bullets and checkboxes is the list at point.

:PROPERTIES: :CUSTOM_ID: org-evaluate-time-range :END:

org-copy-subtree (&optional n cut force-store-markers nosubtrees)

Evaluate a time range by computing the difference between start and end.
Normally the result is just printed in the echo area, but with prefix arg
TO-BUFFER, the result is inserted just after the date stamp into the buffer.
If the time range is actually in a table, the result is inserted into the
next column.
For time difference computation, a year is assumed to be exactly 365
days in order to avoid rounding problems.

:PROPERTIES: :CUSTOM_ID: org-copy-subtree :END:

org-check-after-date (date)

Copy the current subtree it in the clipboard.
With prefix arg N, copy this many sequential subtrees.
This is a short-hand for marking the subtree and then copying it.
If CUT is non-nil, actually cut the subtree.
If FORCE-STORE-MARKERS is non-nil, store the relative locations
of some markers in the region, even if CUT is non-nil.  This is
useful if the caller implements cut-and-paste as copy-then-paste-then-cut.

:PROPERTIES: :CUSTOM_ID: org-check-after-date :END:

org-mark-ring-goto (&optional n)

Check if there are deadlines or scheduled entries after DATE.

:PROPERTIES: :CUSTOM_ID: org-mark-ring-goto :END:

org-babel-pop-to-session-maybe

Jump to the previous position in the mark ring.
With prefix arg N, jump back that many stored positions.  When
called several times in succession, walk through the entire ring.
Org-mode commands jumping to a different position in the current file,
or to another Org-mode file, automatically push the old position
onto the ring.

:PROPERTIES: :CUSTOM_ID: org-babel-pop-to-session-maybe :END:

org-agenda-archive-default-with-confirmation

Conditionally pop to a session.
Detect if this is context for a org-babel src-block and if so
then run `org-babel-switch-to-session'.

:PROPERTIES: :CUSTOM_ID: org-agenda-archive-default-with-confirmation :END:

org-babel-lob-ingest (&optional file)

Archive the entry or subtree belonging to the current agenda entry.

:PROPERTIES: :CUSTOM_ID: org-babel-lob-ingest :END:

org-dblock-write:amazon (params)

Add all named source-blocks defined in FILE to
`org-babel-library-of-babel'.

:PROPERTIES: :CUSTOM_ID: org-dblock-write:amazon :END:

org-table-fedit-line-up

Dynamic block for inserting the cover of a book.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-line-up :END:

org-table-kill-row

Move cursor one line up in the window showing the table.

:PROPERTIES: :CUSTOM_ID: org-table-kill-row :END:

org-sort-entries (&optional with-case sorting-type getkey-func compare-func property)

Delete the current row or horizontal line from the table.

:PROPERTIES: :CUSTOM_ID: org-sort-entries :END:

org-switchb (&optional arg)

Sort entries on a certain level of an outline tree.
If there is an active region, the entries in the region are sorted.
Else, if the cursor is before the first entry, sort the top-level items.
Else, the children of the entry at point are sorted.

Sorting can be alphabetically, numerically, by date/time as given by
a time stamp, by a property, by priority order, or by a custom function.

The command prompts for the sorting type unless it has been given to the
function through the SORTING-TYPE argument, which needs to be a character,
(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F).  Here is the
precise meaning of each character:

n   Numerically, by converting the beginning of the entry/item to a number.
a   Alphabetically, ignoring the TODO keyword and the priority, if any.
o   By order of TODO keywords.
t   By date/time, either the first active time stamp in the entry, or, if
    none exist, by the first inactive one.
s   By the scheduled date/time.
d   By deadline date/time.
c   By creation time, which is assumed to be the first inactive time stamp
    at the beginning of a line.
p   By priority according to the cookie.
r   By the value of a property.

Capital letters will reverse the sort order.

If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be
called with point at the beginning of the record.  It must return either
a string or a number that should serve as the sorting key for that record.

Comparing entries ignores case by default.  However, with an optional argument
WITH-CASE, the sorting considers case as well.

Sorting is done against the visible part of the headlines, it ignores hidden
links.

:PROPERTIES: :CUSTOM_ID: org-switchb :END:

org-columns-edit-attributes

Switch between Org buffers.
With one prefix argument, restrict available buffers to files.
With two prefix arguments, restrict available buffers to agenda files.

Defaults to `iswitchb' for buffer name completion.
Set `org-completion-use-ido' to make it use ido instead.

:PROPERTIES: :CUSTOM_ID: org-columns-edit-attributes :END:

org-bibtex-read

Edit the attributes of the current column.

:PROPERTIES: :CUSTOM_ID: org-bibtex-read :END:

org-odt-export-as-odf-and-open

Read a bibtex entry and save to `org-bibtex-entries'.
This uses `bibtex-parse-entry'.

:PROPERTIES: :CUSTOM_ID: org-odt-export-as-odf-and-open :END:

org-plot/gnuplot (&optional params)

Export LaTeX fragment as OpenDocument formula and immediately open it.
Use `org-odt-export-as-odf' to read LaTeX fragment and OpenDocument
formula file.

:PROPERTIES: :CUSTOM_ID: org-plot/gnuplot :END:

org-narrow-to-block

Plot table using gnuplot.  Gnuplot options can be specified with PARAMS.
If not given options will be taken from the +PLOT
line directly before or after the table.

:PROPERTIES: :CUSTOM_ID: org-narrow-to-block :END:

org-publish-all (&optional force async)

Narrow buffer to the current block.

:PROPERTIES: :CUSTOM_ID: org-publish-all :END:

org-timer-change-times-in-region (beg end delta)

Publish all projects.
With prefix argument FORCE, remove all files in the timestamp
directory and force publishing all projects.  With a non-nil
optional argument ASYNC, publishing will be done asynchronously,
in another process.

:PROPERTIES: :CUSTOM_ID: org-timer-change-times-in-region :END:

org-agenda-archive-default

Change all h:mm:ss time in region by a DELTA.

:PROPERTIES: :CUSTOM_ID: org-agenda-archive-default :END:

org-save-all-org-buffers

Archive the entry or subtree belonging to the current agenda entry.

:PROPERTIES: :CUSTOM_ID: org-save-all-org-buffers :END:

org-advertized-archive-subtree (&optional find-done)

Save all Org-mode buffers without user confirmation.

:PROPERTIES: :CUSTOM_ID: org-advertized-archive-subtree :END:

org-agenda-entry-text-show

Move the current subtree to the archive.
The archive can be a certain top-level heading in the current file, or in
a different file.  The tree will be moved to that location, the subtree
heading be marked DONE, and the current time will be added.

When called with prefix argument FIND-DONE, find whole trees without any
open TODO items and archive them (after getting confirmation from the user).
If the cursor is not at a headline when this command is called, try all level
1 trees.  If the cursor is on a headline, only try the direct children of
this heading.

:PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-show :END:

org-hide-block-toggle (&optional force)

Add entry context for all agenda lines.

:PROPERTIES: :CUSTOM_ID: org-hide-block-toggle :END:

org-indent-item-tree

Toggle the visibility of the current block.

:PROPERTIES: :CUSTOM_ID: org-indent-item-tree :END:

org-insert-heading (&optional arg invisible-ok)

Indent a local list item including its children.
If a region is active, all items inside will be moved.

:PROPERTIES: :CUSTOM_ID: org-insert-heading :END:

org-clock-timestamps-down (&optional n)

Insert a new heading or item with same depth at point.
If point is in a plain list and ARG is nil, create a new list item.
With one universal prefix argument, insert a heading even in lists.
With two universal prefix arguments, insert the heading at the end
of the parent subtree.

If point is at the beginning of a headline, insert a sibling before
the current headline.  If point is not at the beginning, split the line
and create a new headline with the text in the current line after point
(see `org-M-RET-may-split-line' on how to modify this behavior).

If point is at the beginning of a normal line, turn this line into
a heading.

When INVISIBLE-OK is set, stop at invisible headlines when going back.
This is important for non-interactive uses of the command.

:PROPERTIES: :CUSTOM_ID: org-clock-timestamps-down :END:

org-inlinetask-promote

Increase CLOCK timestamps at cursor.
Optional argument N tells to change by that many units.

:PROPERTIES: :CUSTOM_ID: org-inlinetask-promote :END:

org-publish-project (project &optional force async)

Promote the inline task at point.
If the task has an end part, promote it.  Also, prevents level from
going below `org-inlinetask-min-level'.

:PROPERTIES: :CUSTOM_ID: org-publish-project :END:

orgtbl-error

Publish PROJECT.

PROJECT is either a project name, as a string, or a project
alist (see `org-publish-project-alist' variable).

When optional argument FORCE is non-nil, force publishing all
files in PROJECT.  With a non-nil optional argument ASYNC,
publishing will be done asynchronously, in another process.

:PROPERTIES: :CUSTOM_ID: orgtbl-error :END:

org-bibtex-check (&optional optional)

Error when there is no default binding for a table key.

:PROPERTIES: :CUSTOM_ID: org-bibtex-check :END:

org-agenda-set-property

Check the current headline for required fields.
With prefix argument OPTIONAL also prompt for optional fields.

:PROPERTIES: :CUSTOM_ID: org-agenda-set-property :END:

org-babel-switch-to-session-with-code (&optional arg info)

Set a property for the current headline.

:PROPERTIES: :CUSTOM_ID: org-babel-switch-to-session-with-code :END:

org-table-sort-lines (with-case &optional sorting-type)

Switch to code buffer and display session.

:PROPERTIES: :CUSTOM_ID: org-table-sort-lines :END:

org-timer (&optional restart no-insert-p)

Sort table lines according to the column at point.

The position of point indicates the column to be used for
sorting, and the range of lines is the range between the nearest
horizontal separator lines, or the entire table of no such lines
exist.  If point is before the first column, you will be prompted
for the sorting column.  If there is an active region, the mark
specifies the first line and the sorting column, while point
should be in the last line to be included into the sorting.

The command then prompts for the sorting type which can be
alphabetically, numerically, or by time (as given in a time stamp
in the field).  Sorting in reverse order is also possible.

With prefix argument WITH-CASE, alphabetic sorting will be case-sensitive.

If SORTING-TYPE is specified when this function is called from a Lisp
program, no prompting will take place.  SORTING-TYPE must be a character,
any of (?a ?A ?n ?N ?t ?T) where the capital letter indicate that sorting
should be done in reverse order.

:PROPERTIES: :CUSTOM_ID: org-timer :END:

org-agenda-date-later-minutes (arg)

Insert a H:MM:SS string from the timer into the buffer.
The first time this command is used, the timer is started.  When used with
a C-u prefix, force restarting the timer.
When used with a double prefix argument C-u, change all the timer string
in the region by a fixed amount.  This can be used to recalibrate a timer
that was not started at the correct moment.

If NO-INSERT-P is non-nil, return the string instead of inserting
it in the buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-date-later-minutes :END:

org-todo-yesterday (&optional arg)

Change the time of this item, in units of `org-time-stamp-rounding-minutes'.

:PROPERTIES: :CUSTOM_ID: org-todo-yesterday :END:

org-columns-previous-allowed-value

Like `org-todo' but the time of change will be 23:59 of yesterday.

:PROPERTIES: :CUSTOM_ID: org-columns-previous-allowed-value :END:

org-next-block (arg &optional backward block-regexp)

Switch to the previous allowed value for this column.

:PROPERTIES: :CUSTOM_ID: org-next-block :END:

org-agenda-day-view (&optional day-of-month)

Jump to the next block.
With a prefix argument ARG, jump forward ARG many source blocks.
When BACKWARD is non-nil, jump to the previous block.
When BLOCK-REGEXP is non-nil, use this regexp to find blocks.

:PROPERTIES: :CUSTOM_ID: org-agenda-day-view :END:

org-clock-display (&optional total-only)

Switch to daily view for agenda.
With argument DAY-OF-MONTH, switch to that day of the month.

:PROPERTIES: :CUSTOM_ID: org-clock-display :END:

org-table-copy-down (n)

Show subtree times in the entire buffer.
If TOTAL-ONLY is non-nil, only show the total time for the entire file
in the echo area.

Use M-x org-clock-remove-overlays to remove the subtree times.

:PROPERTIES: :CUSTOM_ID: org-table-copy-down :END:

org-indent-block

Copy a field down in the current column.
If the field at the cursor is empty, copy into it the content of
the nearest non-empty field above.  With argument N, use the Nth
non-empty field.  If the current field is not empty, it is copied
down to the next row, and the cursor is moved with it.
Therefore, repeating this command causes the column to be filled
row-by-row.
If the variable `org-table-copy-increment' is non-nil and the
field is an integer or a timestamp, it will be incremented while
copying.  In the case of a timestamp, increment by one day.

:PROPERTIES: :CUSTOM_ID: org-indent-block :END:

org-agenda-next-line

Indent the block at point.

:PROPERTIES: :CUSTOM_ID: org-agenda-next-line :END:

org-previous-block (arg &optional block-regexp)

Move cursor to the next line, and show if follow mode is active.

:PROPERTIES: :CUSTOM_ID: org-previous-block :END:

Jump to the previous block.
With a prefix argument ARG, jump backward ARG many source blocks.
When BLOCK-REGEXP is non-nil, use this regexp to find blocks.

:PROPERTIES: :CUSTOM_ID: org-occur-link-in-agenda-files :END:

org-timer-show-remaining-time

Create a link and search for it in the agendas.
The link is not stored in `org-stored-links', it is just created
for the search purpose.

:PROPERTIES: :CUSTOM_ID: org-timer-show-remaining-time :END:

org-agenda-append-agenda

Display the remaining time before the timer ends.

:PROPERTIES: :CUSTOM_ID: org-agenda-append-agenda :END:

org-outdent-item

Append another agenda view to the current one.
This function allows interactive building of block agendas.
Agenda views are separated by `org-agenda-block-separator'.

:PROPERTIES: :CUSTOM_ID: org-outdent-item :END:

org-delete-property (property &optional delete-empty-drawer)

Outdent a local list item, but not its children.
If a region is active, all items inside will be moved.

:PROPERTIES: :CUSTOM_ID: org-delete-property :END:

org-babel-mark-block

In the current entry, delete PROPERTY.
When optional argument DELETE-EMPTY-DRAWER is a string, it defines
an empty drawer to delete.

:PROPERTIES: :CUSTOM_ID: org-babel-mark-block :END:

org-ctags-get-filename-for-tag (tag)

Mark current src block.

:PROPERTIES: :CUSTOM_ID: org-ctags-get-filename-for-tag :END:

org-clock-timestamps-up (&optional n)

TAG is a string.  Search the active TAGS file for a matching tag.
If the tag is found, return a list containing the filename, line number, and
buffer position where the tag is found.

:PROPERTIES: :CUSTOM_ID: org-clock-timestamps-up :END:

org-publish-current-file (&optional force async)

Increase CLOCK timestamps at cursor.
Optional argument N tells to change by that many units.

:PROPERTIES: :CUSTOM_ID: org-publish-current-file :END:

org-plot/collect-options (&optional params)

Publish the current file.
With prefix argument FORCE, force publish the file.  When
optional argument ASYNC is non-nil, publishing will be done
asynchronously, in another process.

:PROPERTIES: :CUSTOM_ID: org-plot/collect-options :END:

org-agenda-earlier (arg)

Collect options from an org-plot '#+Plot:' line.
Accepts an optional property list PARAMS, to which the options
will be added.  Returns the resulting property list.

:PROPERTIES: :CUSTOM_ID: org-agenda-earlier :END:

org-agenda-bulk-toggle

Go backward in time by the current span.
With prefix ARG, go backward that many times the current span.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-toggle :END:

org-org-export-to-org (&optional async subtreep visible-only ext-plist)

Toggle the mark at point for bulk action.

:PROPERTIES: :CUSTOM_ID: org-org-export-to-org :END:

org-table-fedit-ref-right

Export current buffer to an org file.

If narrowing is active in the current buffer, only export its
narrowed part.

If a region is active, export that region.

A non-nil optional argument ASYNC means the process should happen
asynchronously.  The resulting file should be accessible through
the `org-export-stack' interface.

When optional argument SUBTREEP is non-nil, export the sub-tree
at point, extracting information from the headline properties
first.

When optional argument VISIBLE-ONLY is non-nil, don't export
contents of hidden elements.

EXT-PLIST, when provided, is a property list with external
parameters overriding Org default settings, but still inferior to
file-local settings.

Return output file name.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-right :END:

org-do-demote

Shift the reference at point one field to the right.

:PROPERTIES: :CUSTOM_ID: org-do-demote :END:

org-publish-current-project (&optional force async)

Demote the current heading lower down the tree.
If the region is active in `transient-mark-mode', demote all headings
in the region.

:PROPERTIES: :CUSTOM_ID: org-publish-current-project :END:

org-goto (&optional alternative-interface)

Publish the project associated with the current file.
With a prefix argument, force publishing of all files in
the project.

:PROPERTIES: :CUSTOM_ID: org-goto :END:

org-agenda-archive-with (cmd &optional confirm)

Look up a different location in the current file, keeping current visibility.

When you want look-up or go to a different location in a
document, the fastest way is often to fold the entire buffer and
then dive into the tree.  This method has the disadvantage, that
the previous location will be folded, which may not be what you
want.

This command works around this by showing a copy of the current
buffer in an indirect buffer, in overview mode.  You can dive
into the tree in that copy, use org-occur and incremental search
to find a location.  When pressing RET or `Q', the command
returns to the original buffer in which the visibility is still
unchanged.  After RET it will also jump to the location selected
in the indirect buffer and expose the headline hierarchy above.

With a prefix argument, use the alternative interface: e.g. if
`org-goto-interface' is 'outline use 'outline-path-completion.

:PROPERTIES: :CUSTOM_ID: org-agenda-archive-with :END:

org-clock-remove-overlays (&optional beg end noremove)

Move the entry to the archive sibling.

:PROPERTIES: :CUSTOM_ID: org-clock-remove-overlays :END:

org-table-insert-hline (&optional above)

Remove the occur highlights from the buffer.
BEG and END are ignored.  If NOREMOVE is nil, remove this function
from the `before-change-functions' in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-table-insert-hline :END:

org-agenda-clockreport-mode (&optional with-filter)

Insert a horizontal-line below the current line into the table.
With prefix ABOVE, insert above the current line.

:PROPERTIES: :CUSTOM_ID: org-agenda-clockreport-mode :END:

org-babel-insert-header-arg

Toggle clocktable mode in an agenda buffer.
With prefix arg WITH-FILTER, make the clocktable respect the current
agenda filter.

:PROPERTIES: :CUSTOM_ID: org-babel-insert-header-arg :END:

org-agenda-set-restriction-lock (&optional type)

Insert a header argument selecting from lists of common args and values.

:PROPERTIES: :CUSTOM_ID: org-agenda-set-restriction-lock :END:

org-footnote-renumber-fn:N

Set restriction lock for agenda, to current subtree or file.
Restriction will be the file if TYPE is `file', or if type is the
universal prefix '(4), or if the cursor is before the first headline
in the file.  Otherwise, restriction will be to the current subtree.

:PROPERTIES: :CUSTOM_ID: org-footnote-renumber-fn:N :END:

org-mouse-show-context-menu (event prefix)

Renumber the simple footnotes like fn:17 into a sequence in the document.

:PROPERTIES: :CUSTOM_ID: org-mouse-show-context-menu :END:

org-agenda-to-appt (&optional refresh filter &rest args)

Invoke the context menu.

If the value of `org-mouse-context-menu-function' is a function, then
this function is called.  Otherwise, the current major mode menu is used.

:PROPERTIES: :CUSTOM_ID: org-agenda-to-appt :END:

org-inlinetask-insert-task (&optional no-state)

Activate appointments found in `org-agenda-files'.
With a C-u prefix, refresh the list of
appointments.

If FILTER is t, interactively prompt the user for a regular
expression, and filter out entries that don't match it.

If FILTER is a string, use this string as a regular expression
for filtering entries out.

If FILTER is a function, filter out entries against which
calling the function returns nil.  This function takes one
argument: an entry from `org-agenda-get-day-entries'.

FILTER can also be an alist with the car of each cell being
either 'headline or 'category.  For example:

  '((headline "IMPORTANT")
    (category "Work"))

will only add headlines containing IMPORTANT or headlines
belonging to the "Work" category.

ARGS are symbols indicating what kind of entries to consider.
By default `org-agenda-to-appt' will use :deadline*, :scheduled*
(i.e., deadlines and scheduled items with a hh:mm specification)
and :timestamp entries.  See the docstring of `org-diary' for
details and examples.

If an entry has a APPT_WARNTIME property, its value will be used
to override `appt-message-warning-time'.

:PROPERTIES: :CUSTOM_ID: org-inlinetask-insert-task :END:

org-agenda-week-view (&optional iso-week)

Insert an inline task.
If prefix arg NO-STATE is set, ignore `org-inlinetask-default-state'.

:PROPERTIES: :CUSTOM_ID: org-agenda-week-view :END:

org-agenda-redo (&optional all)

Switch to daily view for agenda.
With argument ISO-WEEK, switch to the corresponding ISO week.
If ISO-WEEK has more then 2 digits, only the last two encode the
week.  Any digits before this encode a year.  So 200712 means
week 12 of year 2007.  Years in the range 1938-2037 can also be
written as 2-digit years.

:PROPERTIES: :CUSTOM_ID: org-agenda-redo :END:

org-capture-refile

Rebuild possibly ALL agenda view(s) in the current buffer.

:PROPERTIES: :CUSTOM_ID: org-capture-refile :END:

org-submit-bug-report

Finalize the current capture and then refile the entry.
Refiling is done from the base buffer, because the indirect buffer is then
already gone.  Any prefix argument will be passed to the refile command.

:PROPERTIES: :CUSTOM_ID: org-submit-bug-report :END:

org-escape-code-in-region (beg end)

Submit a bug report on Org-mode via mail.

Don't hesitate to report any problems or inaccurate documentation.

If you don't have setup sending mail from (X)Emacs, please copy the
output buffer into your mail program, as it gives us important
information about your Org-mode version and configuration.

:PROPERTIES: :CUSTOM_ID: org-escape-code-in-region :END:

org-agenda-bulk-mark-all

Escape lines between BEG and END.
Escaping happens when a line starts with "*", "#+", ",*" or
",#+" by appending a comma to it.

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark-all :END:

org-babel-view-src-block-info

Mark all entries for future agenda bulk action.

:PROPERTIES: :CUSTOM_ID: org-babel-view-src-block-info :END:

org-beginning-of-item

Display information on the current source block.
This includes header arguments, language and name, and is largely
a window into the `org-babel-get-src-block-info' function.

:PROPERTIES: :CUSTOM_ID: org-beginning-of-item :END:

org-table-align

Go to the beginning of the current item.
Throw an error when not in a list.

:PROPERTIES: :CUSTOM_ID: org-table-align :END:

org-table-fedit-ref-up

Align the table at point by aligning all vertical bars.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-ref-up :END:

org-babel-tangle-file (file &optional target-file lang)

Shift the reference at point one row/hline up.

:PROPERTIES: :CUSTOM_ID: org-babel-tangle-file :END:

org-toggle-inline-images (&optional include-linked)

Extract the bodies of source code blocks in FILE.
Source code blocks are extracted with `org-babel-tangle'.
Optional argument TARGET-FILE can be used to specify a default
export file for all source blocks.  Optional argument LANG can be
used to limit the exported source code blocks by language.

:PROPERTIES: :CUSTOM_ID: org-toggle-inline-images :END:

org-show-priority

Toggle the display of inline images.
INCLUDE-LINKED is passed to `org-display-inline-images'.

:PROPERTIES: :CUSTOM_ID: org-show-priority :END:

Show the priority of the current item.
This priority is composed of the main priority given with the [#A] cookies,
and by additional input from the age of a schedules or deadline entry.

:PROPERTIES: :CUSTOM_ID: org-insert-all-links :END:

org-demote-subtree

Insert all links in `org-stored-links'.

:PROPERTIES: :CUSTOM_ID: org-demote-subtree :END:

org-table-fedit-abort

Demote the entire subtree.  See `org-demote'.
See also `org-promote'.

:PROPERTIES: :CUSTOM_ID: org-table-fedit-abort :END:

org-agenda-goto-mouse (ev)

Abort editing formulas, without installing the changes.

:PROPERTIES: :CUSTOM_ID: org-agenda-goto-mouse :END:

org-table-beginning-of-field (&optional n)

Go to the Org-mode file which contains the item at the mouse click.

:PROPERTIES: :CUSTOM_ID: org-table-beginning-of-field :END:

org-toggle-ordered-property

Move to the end of the current table field.
If already at or after the end, move to the end of the next table field.
With numeric argument N, move N-1 fields forward first.

:PROPERTIES: :CUSTOM_ID: org-toggle-ordered-property :END:

org-edit-src-abort

Toggle the ORDERED property of the current entry.
For better visibility, you can track the value of this property with a tag.
See variable `org-track-ordered-property-with-tag'.

:PROPERTIES: :CUSTOM_ID: org-edit-src-abort :END:

org-clock-report (&optional arg)

Abort editing of the src code and return to the Org buffer.

:PROPERTIES: :CUSTOM_ID: org-clock-report :END:

org-agenda-recenter (arg)

Create a table containing a report about clocked time.
If the cursor is inside an existing clocktable block, then the table
will be updated.  If not, a new clocktable will be inserted.  The scope
of the new clock will be subtree when called from within a subtree, and
file elsewhere.

When called with a prefix argument, move to the first clock table in the
buffer and update it.

:PROPERTIES: :CUSTOM_ID: org-agenda-recenter :END:

org-columns-display-here-title

Display the Org-mode file which contains the item at point and recenter.

:PROPERTIES: :CUSTOM_ID: org-columns-display-here-title :END:

org-edit-special (&optional arg)

Overlay the newline before the current line with the table title.

:PROPERTIES: :CUSTOM_ID: org-edit-special :END:

org-remove-formatting-on-newlines-in-region (beg end)

Call a special editor for the element at point.
When at a table, call the formula editor with `org-table-edit-formulas'.
When in a source code block, call `org-edit-src-code'.
When in a fixed-width region, call `org-edit-fixed-width-region'.
When at an #+INCLUDE keyword, visit the included file.
On a link, call `ffap' to visit the link at point.
Otherwise, return a user error.

:PROPERTIES: :CUSTOM_ID: org-remove-formatting-on-newlines-in-region :END:

org-agenda-execute (arg)

Remove formatting on newline characters.

:PROPERTIES: :CUSTOM_ID: org-agenda-execute :END:

org-attach-attach-cp

Execute another agenda command, keeping same window.
So this is just a shortcut for `C-c a', available
in the agenda.

:PROPERTIES: :CUSTOM_ID: org-attach-attach-cp :END:

Options

Attach a file by copying it.

:PROPERTIES: :CUSTOM_ID: options :END:

org-html-todo-kwd-class-prefix ""

:PROPERTIES: :CUSTOM_ID: org-html-todo-kwd-class-prefix :END:

Prefix to class names for TODO keywords.
Each TODO keyword gets a class given by the keyword itself, with this prefix.
The default prefix is empty because it is nice to just use the keyword
as a class name.  But if you get into conflicts with other, existing
CSS classes, then this prefix can be very useful.

org-bibtex-key-property "CUSTOM_ID"

:PROPERTIES: :CUSTOM_ID: org-bibtex-key-property :END:

Property that holds the bibtex key.
By default, this is CUSTOM_ID, which enables easy linking to
bibtex headlines from within an org file.  This can be set to ID
to enable global links, but only with great caution, as global
IDs must be unique.

org-entities-user nil

:PROPERTIES: :CUSTOM_ID: org-entities-user :END:

User-defined entities used in Org-mode to produce special characters.
Each entry in this list is a list of strings.  It associates the name
of the entity that can be inserted into an Org file as \name with the
appropriate replacements for the different export backends.  The order
of the fields is the following

name                 As a string, without the leading backslash
LaTeX replacement    In ready LaTeX, no further processing will take place
LaTeX mathp          A Boolean, either t or nil.  t if this entity needs
                     to be in math mode.
HTML replacement     In ready HTML, no further processing will take place.
                     Usually this will be an &...; entity.
ASCII replacement    Plain ASCII, no extensions.  Symbols that cannot be
                     represented will be left as they are, but see the.
                     variable `org-entities-ascii-explanatory'.
Latin1 replacement   Use the special characters available in latin1.
utf-8 replacement    Use the special characters available in utf-8.

If you define new entities here that require specific LaTeX
packages to be loaded, add these packages to `org-latex-packages-alist'.

org-export-html-preamble t

:PROPERTIES: :CUSTOM_ID: org-export-html-preamble :END:

Non-nil means insert a preamble in HTML export.

When `t', insert a string as defined by one of the formatting
strings in `org-export-html-preamble-format'.  When set to a
string, this string overrides `org-export-html-preamble-format'.
When set to a function, apply this function and insert the
returned string.  The function takes no argument, but you can
use `opt-plist' to access the current export options.

Setting :html-preamble in publishing projects will take
precedence over this variable.

org-table-exit-follow-field-mode-when-leaving-table t

:PROPERTIES: :CUSTOM_ID: org-table-exit-follow-field-mode-when-leaving-table :END:

Non-nil means automatically exit the follow mode.
When nil, the follow mode will stay on and be active in any table
the cursor enters.  Since the table follow filed mode messes with the
window configuration, it is not recommended to set this variable to nil,
except maybe locally in a special file that has mostly tables with long
fields.

org-log-done-with-time t

:PROPERTIES: :CUSTOM_ID: org-log-done-with-time :END:

Non-nil means the CLOSED time stamp will contain date and time.
When nil, only the date will be recorded.

org-agenda-restriction-lock-highlight-subtree t

:PROPERTIES: :CUSTOM_ID: org-agenda-restriction-lock-highlight-subtree :END:

Non-nil means highlight the whole subtree when restriction is active.
Otherwise only highlight the headline.  Highlighting the whole subtree is
useful to ensure no edits happen beyond the restricted region.

org-export-babel-evaluate t

:PROPERTIES: :CUSTOM_ID: org-export-babel-evaluate :END:

Switch controlling code evaluation during export.
When set to nil no code will be evaluated as part of the export
process.  When set to 'inline-only, only inline code blocks will
be executed.

org-export-blocks (quote ((export-comment org-ex...

:PROPERTIES: :CUSTOM_ID: org-export-blocks :END:

org-agenda-filter-effort-default-operator "<"

:PROPERTIES: :CUSTOM_ID: org-agenda-filter-effort-default-operator :END:

The default operator for effort estimate filtering.
If you select an effort estimate limit without first pressing an operator,
this one will be used.

org-cycle-skip-children-state-if-no-children t

:PROPERTIES: :CUSTOM_ID: org-cycle-skip-children-state-if-no-children :END:

Non-nil means skip CHILDREN state in entries that don't have any.

org-enforce-todo-checkbox-dependencies nil

:PROPERTIES: :CUSTOM_ID: org-enforce-todo-checkbox-dependencies :END:

Non-nil means unchecked boxes will block switching the parent to DONE.
When this is nil, checkboxes have no influence on switching TODO states.
When non-nil, you first need to check off all check boxes before the TODO
entry can be switched to DONE.
This variable needs to be set before org.el is loaded, and you need to
restart Emacs after a change to make the change effective.  The only way
to change is while Emacs is running is through the customize interface.

org-agenda-menu-show-matcher t

:PROPERTIES: :CUSTOM_ID: org-agenda-menu-show-matcher :END:

Non-nil means show the match string in the agenda dispatcher menu.
When nil, the matcher string is not shown, but is put into the help-echo
property so than moving the mouse over the command shows it.
Setting it to nil is good if matcher strings are very long and/or if
you want to use two-columns display (see `org-agenda-menu-two-columns').

org-inlinetask-default-state nil

:PROPERTIES: :CUSTOM_ID: org-inlinetask-default-state :END:

Non-nil means make inline tasks have a TODO keyword initially.
This should be the state `org-inlinetask-insert-task' should use by
default, or nil of no state should be assigned.

org-latex-create-formula-image-program (quote dvipng)

:PROPERTIES: :CUSTOM_ID: org-latex-create-formula-image-program :END:

Program to convert LaTeX fragments with.

dvipng          Process the LaTeX fragments to dvi file, then convert
                dvi files to png files using dvipng.
                This will also include processing of non-math environments.
imagemagick     Convert the LaTeX fragments to pdf files and use imagemagick
                to convert pdf files to png files

org-agenda-category-icon-alist nil

:PROPERTIES: :CUSTOM_ID: org-agenda-category-icon-alist :END:

Alist of category icon to be displayed in agenda views.

Each entry should have the following format:

  (CATEGORY-REGEXP FILE-OR-DATA TYPE DATA-P PROPS)

Where CATEGORY-REGEXP is a regexp matching the categories where
the icon should be displayed.
FILE-OR-DATA either a file path or a string containing image data.

The other fields can be omitted safely if not needed:
TYPE indicates the image type.
DATA-P is a boolean indicating whether the FILE-OR-DATA string is
image data.
PROPS are additional image attributes to assign to the image,
like, e.g. `:ascent center'.

   ("Org" "/path/to/icon.png" nil nil :ascent center)

If you want to set the display properties yourself, just put a
list as second element:

  (CATEGORY-REGEXP (MY PROPERTY LIST))

For example, to display a 16px horizontal space for Emacs
category, you can use:

  ("Emacs" '(space . (:width (16))))

:PROPERTIES: :CUSTOM_ID: org-confirm-shell-link-not-regexp :END:

A regexp to skip confirmation for shell links.

org-agenda-search-view-always-boolean nil

:PROPERTIES: :CUSTOM_ID: org-agenda-search-view-always-boolean :END:

Non-nil means the search string is interpreted as individual parts.

The search string for search view can either be interpreted as a phrase,
or as a list of snippets that define a boolean search for a number of
strings.

When this is non-nil, the string will be split on whitespace, and each
snippet will be searched individually, and all must match in order to
select an entry.  A snippet is then a single string of non-white
characters, or a string in double quotes, or a regexp in {} braces.
If a snippet is preceded by "-", the snippet must *not* match.
"+" is syntactic sugar for positive selection.  Each snippet may
be found as a full word or a partial word, but see the variable
`org-agenda-search-view-force-full-words'.

When this is nil, search will look for the entire search phrase as one,
with each space character matching any amount of whitespace, including
line breaks.

Even when this is nil, you can still switch to Boolean search dynamically
by preceding the first snippet with "+" or "-".  If the first snippet
is a regexp marked with braces like "{abc}", this will also switch to
boolean search.

org-time-clocksum-use-effort-durations nil

:PROPERTIES: :CUSTOM_ID: org-time-clocksum-use-effort-durations :END:

When non-nil, \[org-clock-display] uses effort durations.
E.g. by default, one day is considered to be a 8 hours effort,
so a task that has been clocked for 16 hours will be displayed
as during 2 days in the clock display or in the clocktable.

See `org-effort-durations' on how to set effort durations
and `org-time-clocksum-format' for more on time clock formats.

org-footnote-section "Footnotes"

:PROPERTIES: :CUSTOM_ID: org-footnote-section :END:

Outline heading containing footnote definitions.

This can be nil, to place footnotes locally at the end of the
current outline node.  If can also be the name of a special
outline heading under which footnotes should be put.

This variable defines the place where Org puts the definition
automatically, i.e. when creating the footnote, and when sorting
the notes.  However, by hand you may place definitions
*anywhere*.

If this is a string, during export, all subtrees starting with
this heading will be ignored.

org-org-htmlized-css-url nil

:PROPERTIES: :CUSTOM_ID: org-org-htmlized-css-url :END:

URL pointing to the CSS defining colors for htmlized Emacs buffers.
Normally when creating an htmlized version of an Org buffer,
htmlize will create the CSS to define the font colors.  However,
this does not work when converting in batch mode, and it also can
look bad if different people with different fontification setup
work on the same website.  When this variable is non-nil,
creating an htmlized version of an Org buffer using
`org-org-export-as-org' will include a link to this URL if the
setting of `org-html-htmlize-output-type' is 'css.

org-agenda-log-mode-items (quote (closed clock))

:PROPERTIES: :CUSTOM_ID: org-agenda-log-mode-items :END:

List of items that should be shown in agenda log mode.
This list may contain the following symbols:

  closed    Show entries that have been closed on that day.
  clock     Show entries that have received clocked time on that day.
  state     Show all logged state changes.
Note that instead of changing this variable, you can also press `C-u l' in
the agenda to display all available LOG items temporarily.

org-faces-easy-properties =(quote ((todo .

:PROPERTIES: :CUSTOM_ID: org-faces-easy-properties :END:

The property changes by easy faces.
This is an alist, the keys show the area of application, the values
can be `:foreground' or `:background'.  A color string for special
keywords will then be interpreted as either foreground or background
color.

org-latex-format-headline-function (quote org-latex-format-headli...

:PROPERTIES: :CUSTOM_ID: org-latex-format-headline-function :END:

Function for formatting the headline's text.

This function will be called with 5 arguments:
TODO      the todo keyword (string or nil).
TODO-TYPE the type of todo (symbol: `todo', `done', nil)
PRIORITY  the priority of the headline (integer or nil)
TEXT      the main headline text (string).
TAGS      the tags as a list of strings (list of strings or nil).

The function result will be used in the section format string.

Use `org-latex-format-headline-default-function' by default,
which format headlines like for Org version prior to 8.0.

:PROPERTIES: :CUSTOM_ID: org-export-html-link-org-files-as-html :END:

Non-nil means make file links to `file.org' point to `file.html'.
When org-mode is exporting an org-mode file to HTML, links to
non-html files are directly put into a href tag in HTML.
However, links to other Org-mode files (recognized by the
extension `.org.) should become links to the corresponding html
file, assuming that the linked org-mode file will also be
converted to HTML.
When nil, the links still point to the plain `.org' file.

org-todo-state-tags-triggers nil

:PROPERTIES: :CUSTOM_ID: org-todo-state-tags-triggers :END:

Tag changes that should be triggered by TODO state changes.
This is a list.  Each entry is

  (state-change (tag . flag) .......)

State-change can be a string with a state, and empty string to indicate the
state that has no TODO keyword, or it can be one of the symbols `todo'
or `done', meaning any not-done or done state, respectively.

org-edit-fixed-width-region-mode (quote artist-mode)

:PROPERTIES: :CUSTOM_ID: org-edit-fixed-width-region-mode :END:

The mode that should be used to edit fixed-width regions.
These are the regions where each line starts with a colon.

org-mobile-force-id-on-agenda-items t

:PROPERTIES: :CUSTOM_ID: org-mobile-force-id-on-agenda-items :END:

Non-nil means make all agenda items carry an ID.

:PROPERTIES: :CUSTOM_ID: org-link-translation-function :END:

Function to translate links with different syntax to Org syntax.
This can be used to translate links created for example by the Planner
or emacs-wiki packages to Org syntax.
The function must accept two parameters, a TYPE containing the link
protocol name like "rmail" or "gnus" as a string, and the linked path,
which is everything after the link protocol.  It should return a cons
with possibly modified values of type and path.
Org contains a function for this, so if you set this variable to
`org-translate-link-from-planner', you should be able follow many
links created by planner.

org-yank-folded-subtrees t

:PROPERTIES: :CUSTOM_ID: org-yank-folded-subtrees :END:

Non-nil means when yanking subtrees, fold them.
If the kill is a single subtree, or a sequence of subtrees, i.e. if
it starts with a heading and all other headings in it are either children
or siblings, then fold all the subtrees.  However, do this only if no
text after the yank would be swallowed into a folded tree by this action.

org-latex-default-class "article"

:PROPERTIES: :CUSTOM_ID: org-latex-default-class :END:

The default LaTeX class.

org-pretty-entities nil

:PROPERTIES: :CUSTOM_ID: org-pretty-entities :END:

Non-nil means show entities as UTF8 characters.
When nil, the \name form remains in the buffer.

:PROPERTIES: :CUSTOM_ID: org-agenda-mouse-1-follows-link :END:

Non-nil means mouse-1 on a link will follow the link in the agenda.
A longer mouse click will still set point.  Does not work on XEmacs.
Needs to be set before org.el is loaded.

org-rss-categories (quote from-tags)

:PROPERTIES: :CUSTOM_ID: org-rss-categories :END:

Where to extract items category information from.
The default is to extract categories from the tags of the
headlines.  When set to another value, extract the category
from the :CATEGORY: property of the entry.

org-latex-packages-alist nil

:PROPERTIES: :CUSTOM_ID: org-latex-packages-alist :END:

Alist of packages to be inserted in every LaTeX header.

These will be inserted after `org-latex-default-packages-alist'.
Each cell is of the format:

    ("options" "package" snippet-flag)

SNIPPET-FLAG, when t, indicates that this package is also needed
when turning LaTeX snippets into images for inclusion into
non-LaTeX output.

Make sure that you only list packages here which:

  - you want in every file
  - do not conflict with the setup in `org-format-latex-header'.
  - do not conflict with the default packages in
    `org-latex-default-packages-alist'.

org-src-fontify-natively nil

:PROPERTIES: :CUSTOM_ID: org-src-fontify-natively :END:

When non-nil, fontify code in code blocks.

org-columns-skip-archived-trees t

:PROPERTIES: :CUSTOM_ID: org-columns-skip-archived-trees :END:

Non-nil means ignore archived trees when creating column view.

org-html-format-inlinetask-function nil

:PROPERTIES: :CUSTOM_ID: org-html-format-inlinetask-function :END:

Function called to format an inlinetask in HTML code.

The function must accept six parameters:
  TODO      the todo keyword, as a string
  TODO-TYPE the todo type, a symbol among `todo', `done' and nil.
  PRIORITY  the inlinetask priority, as a string
  NAME      the inlinetask name, as a string.
  TAGS      the inlinetask tags, as a list of strings.
  CONTENTS  the contents of the inlinetask, as a string.

The function should return the string to be exported.

org-plantuml-jar-path nil

:PROPERTIES: :CUSTOM_ID: org-plantuml-jar-path :END:

Path to the plantuml.jar file.

org-list-demote-modify-bullet nil

:PROPERTIES: :CUSTOM_ID: org-list-demote-modify-bullet :END:

Default bullet type installed when demoting an item.
This is an association list, for each bullet type, this alist will point
to the bullet that should be used when this item is demoted.
For example,

 (setq org-list-demote-modify-bullet
       '(("+" . "-") ("-" . "+") ("*" . "+")))

will make

  + Movies
    + Silence of the Lambs
    + My Cousin Vinny
  + Books
    + The Hunt for Red October
    + The Road to Omaha

into

  + Movies
    - Silence of the Lambs
    - My Cousin Vinny
  + Books
    - The Hunt for Red October
    - The Road to Omaha

org-agenda-todo-ignore-scheduled nil

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-ignore-scheduled :END:

Non-nil means, ignore some scheduled TODO items when making TODO list.
This applies when creating the global todo list.
Valid values are:

past     Don't show entries scheduled today or in the past.

future   Don't show entries scheduled in the future.
         The idea behind this is that by scheduling it, you don't want to
         think about it until the scheduled date.

all      Don't show any scheduled entries in the global todo list.
         The idea behind this is that by scheduling it, you have already
         "taken care" of this item.

t        Same as `all', for backward compatibility.

This variable can also have an integer as a value.  See
`org-agenda-todo-ignore-timestamp' for more details.

See also `org-agenda-todo-ignore-with-date'.
See also the variable `org-agenda-tags-todo-honor-ignore-options' if you want
to make his option also apply to the tags-todo list.

org-html-preamble t

:PROPERTIES: :CUSTOM_ID: org-html-preamble :END:

Non-nil means insert a preamble in HTML export.

When t, insert a string as defined by the formatting string in
`org-html-preamble-format'.  When set to a string, use this
formatting string instead (see `org-html-postamble-format' for an
example of such a formatting string).

When set to a function, apply this function and insert the
returned string.  The function takes the property list of export
options as its only argument.

Setting :html-preamble in publishing projects will take
precedence over this variable.

org-export-table-row-tags (quote ("<tr>" . "</tr>"))

:PROPERTIES: :CUSTOM_ID: org-export-table-row-tags :END:

The opening tag for table data fields.
This is customizable so that alignment options can be specified.
Instead of strings, these can be Lisp forms that will be evaluated
for each row in order to construct the table row tags.  During evaluation,
the variable `head' will be true when this is a header line, nil when this
is a body line.  And the variable `nline' will contain the line number,
starting from 1 in the first header line.  For example

  (setq org-export-table-row-tags
        (cons '(if head
                   ""
                 (if (= (mod nline 2) 1)
                     ""
                   ""))
              ""))

will give even lines the class "tr-even" and odd lines the class "tr-odd".

org-get-priority-function nil

:PROPERTIES: :CUSTOM_ID: org-get-priority-function :END:

Function to extract the priority from a string.
The string is normally the headline.  If this is nil Org computes the
priority from the priority cookie like [#A] in the headline.  It returns
an integer, increasing by 1000 for each priority level.
The user can set a different function here, which should take a string
as an argument and return the numeric priority.

org-stuck-projects (quote ("+LEVEL=2/-DONE" ("TOD...

:PROPERTIES: :CUSTOM_ID: org-stuck-projects :END:

How to identify stuck projects.
This is a list of four items:
1. A tags/todo/property matcher string that is used to identify a project.
   See the manual for a description of tag and property searches.
   The entire tree below a headline matched by this is considered one project.
2. A list of TODO keywords identifying non-stuck projects.
   If the project subtree contains any headline with one of these todo
   keywords, the project is considered to be not stuck.  If you specify
   "*" as a keyword, any TODO keyword will mark the project unstuck.
3. A list of tags identifying non-stuck projects.
   If the project subtree contains any headline with one of these tags,
   the project is considered to be not stuck.  If you specify "*" as
   a tag, any tag will mark the project unstuck.  Note that this is about
   the explicit presence of a tag somewhere in the subtree, inherited
   tags do not count here.  If inherited tags make a project not stuck,
   use "-TAG" in the tags part of the matcher under (1.) above.
4. An arbitrary regular expression matching non-stuck projects.

If the project turns out to be not stuck, search continues also in the
subtree to see if any of the subtasks have project status.

See also the variable `org-tags-match-list-sublevels' which applies
to projects matched by this search as well.

After defining this variable, you may use \[org-agenda-list-stuck-projects]
or `C-c a #' to produce the list.

org-export-with-special-strings t

:PROPERTIES: :CUSTOM_ID: org-export-with-special-strings :END:

Non-nil means interpret "-", "--" and "---" for export.
When this option is turned on, these strings will be exported as:

  Org   HTML       LaTeX
 -----+----------+--------
  \-    ­      \-
  --    –    --
  ---   —    ---
  ...   …   ldots

This option can also be set with the +OPTIONS line, e.g. "-:nil".

org-export-table-remove-special-lines t

:PROPERTIES: :CUSTOM_ID: org-export-table-remove-special-lines :END:

Remove special lines and marking characters in calculating tables.
This removes the special marking character column from tables that are set
up for spreadsheet calculations.  It also removes the entire lines
marked with `!', `_', or `^'.  The lines with `$' are kept, because
the values of constants may be useful to have.

org-read-date-popup-calendar t

:PROPERTIES: :CUSTOM_ID: org-read-date-popup-calendar :END:

Non-nil means pop up a calendar when prompting for a date.
In the calendar, the date can be selected with mouse-1.  However, the
minibuffer will also be active, and you can simply enter the date as well.
When nil, only the minibuffer will be available.

org-refile-use-cache nil

:PROPERTIES: :CUSTOM_ID: org-refile-use-cache :END:

Non-nil means cache refile targets to speed up the process.
The cache for a particular file will be updated automatically when
the buffer has been killed, or when any of the marker used for flagging
refile targets no longer points at a live buffer.
If you have added new entries to a buffer that might themselves be targets,
you need to clear the cache manually by pressing `C-0 C-c C-w' or, if you
find that easier, `C-u C-u C-u C-c C-w'.

org-export-preserve-breaks nil

:PROPERTIES: :CUSTOM_ID: org-export-preserve-breaks :END:

Non-nil means preserve all line breaks when exporting.
Normally, in HTML output paragraphs will be reformatted.  In ASCII
export, line breaks will always be preserved, regardless of this variable.

This option can also be set with the +OPTIONS line, e.g. "\n:t".

org-icalendar-store-UID nil

:PROPERTIES: :CUSTOM_ID: org-icalendar-store-UID :END:

Non-nil means store any created UIDs in properties.

The iCalendar standard requires that all entries have a unique identifier.
Org will create these identifiers as needed.  When this variable is non-nil,
the created UIDs will be stored in the ID property of the entry.  Then the
next time this entry is exported, it will be exported with the same UID,
superseding the previous form of it.  This is essential for
synchronization services.

This variable is not turned on by default because we want to avoid creating
a property drawer in every entry if people are only playing with this feature,
or if they are only using it locally.

org-ascii-underline (quote ((ascii 61 126 45) (lat...

:PROPERTIES: :CUSTOM_ID: org-ascii-underline :END:

Characters for underlining headings in ASCII export.

Alist whose key is a symbol among `ascii', `latin1' and `utf-8'
and whose value is a list of characters.

For each supported charset, this variable associates a sequence
of underline characters.  In a sequence, the characters will be
used in order for headlines level 1, 2, ...  If no character is
available for a given level, the headline won't be underlined.

org-ascii-table-widen-columns t

:PROPERTIES: :CUSTOM_ID: org-ascii-table-widen-columns :END:

Non-nil means widen narrowed columns for export.
When nil, narrowed columns will look in ASCII export just like in
Org mode, i.e. with "=>" as ellipsis.

org-deadline-string "DEADLINE:"

:PROPERTIES: :CUSTOM_ID: org-deadline-string :END:

String to mark deadline entries.
A deadline is this string, followed by a time stamp.  Should be a word,
terminated by a colon.  You can insert a schedule keyword and
a timestamp with \[org-deadline].
Changes become only effective after restarting Emacs.

org-export-blocks-witheld (quote (hidden))

:PROPERTIES: :CUSTOM_ID: org-export-blocks-witheld :END:

List of block types (see `org-export-blocks') which should not be exported.

org-export-table-data-tags (quote ("<td%s>" . "</td>"))

:PROPERTIES: :CUSTOM_ID: org-export-table-data-tags :END:

The opening tag for table data fields.
This is customizable so that alignment options can be specified.
The first %s will be filled with the scope of the field, either row or col.
The second %s will be replaced by a style entry to align the field.
See also the variable `org-export-html-table-align-individual-fields'.

org-latex-footnote-separator "\\textsuperscript{,}\\,"

:PROPERTIES: :CUSTOM_ID: org-latex-footnote-separator :END:

Text used to separate footnotes.

org-html-table-align-individual-fields t

:PROPERTIES: :CUSTOM_ID: org-html-table-align-individual-fields :END:

Non-nil means attach style attributes for alignment to each table field.
When nil, alignment will only be specified in the column tags, but this
is ignored by some browsers (like Firefox, Safari).  Opera does it right
though.

org-clock-in-resume nil

:PROPERTIES: :CUSTOM_ID: org-clock-in-resume :END:

If non-nil, resume clock when clocking into task with open clock.
When clocking into a task with a clock entry which has not been closed,
the clock can be resumed from that point.

:PROPERTIES: :CUSTOM_ID: org-make-link-description-function :END:

Function to use for generating link descriptions from links.
When nil, the link location will be used.  This function must take
two parameters: the first one is the link, the second one is the
description generated by `org-insert-link'.  The function should
return the description to use.

org-export-with-creator (quote comment)

:PROPERTIES: :CUSTOM_ID: org-export-with-creator :END:

Non-nil means the postamble should contain a creator sentence.

The sentence can be set in `org-export-creator-string' and
defaults to "Generated by Org mode XX in Emacs XXX.".

If the value is `comment' insert it as a comment.

org-odt-inline-image-rules (quote (("file" . "\\.\\(jpeg\...

:PROPERTIES: :CUSTOM_ID: org-odt-inline-image-rules :END:

Rules characterizing image files that can be inlined into ODT.

A rule consists in an association whose key is the type of link
to consider, and value is a regexp that will be matched against
link's path.

org-startup-with-beamer-mode nil

:PROPERTIES: :CUSTOM_ID: org-startup-with-beamer-mode :END:

Non-nil means turn on `org-beamer-mode' on startup.
This can also be configured on a per-file basis by adding one of
the following lines anywhere in the buffer:

   #+STARTUP: beamer

org-agenda-bulk-mark-char ">"

:PROPERTIES: :CUSTOM_ID: org-agenda-bulk-mark-char :END:

A single-character string to be used as the bulk mark.

org-cycle-open-archived-trees nil

:PROPERTIES: :CUSTOM_ID: org-cycle-open-archived-trees :END:

Non-nil means `org-cycle' will open archived trees.
An archived tree is a tree marked with the tag ARCHIVE.
When nil, archived trees will stay folded.  You can still open them with
normal outline commands like `show-all', but not with the cycling commands.

org-clock-out-when-done t

:PROPERTIES: :CUSTOM_ID: org-clock-out-when-done :END:

When non-nil, clock will be stopped when the clocked entry is marked DONE.
DONE here means any DONE-like state.
A nil value means clock will keep running until stopped explicitly with
`C-c C-x C-o', or until the clock is started in a different item.
Instead of t, this can also be a list of TODO states that should trigger
clocking out.

org-export-with-LaTeX-fragments t

:PROPERTIES: :CUSTOM_ID: org-export-with-LaTeX-fragments :END:

Non-nil means process LaTeX math fragments for HTML display.
When set, the exporter will find and process LaTeX environments if the
\begin line is the first non-white thing on a line.  It will also find
and process the math delimiters like $a=b$ and \( a=b \) for inline math,
$$a=b$$ and \=\[ a=b \] for display math.

This option can also be set with the +OPTIONS line, e.g. "LaTeX:mathjax".

Allowed values are:

nil             Don't do anything.
verbatim        Keep everything in verbatim
dvipng          Process the LaTeX fragments to images.
                This will also include processing of non-math environments.
imagemagick     Convert the LaTeX fragments to pdf files and use imagemagick
                to convert pdf files to png files.
t               Do MathJax preprocessing if there is at least on math snippet,
                and arrange for MathJax.js to be loaded.

The default is nil, because this option needs the `dvipng' program which
is not available on all systems.

org-tags-sort-function nil

:PROPERTIES: :CUSTOM_ID: org-tags-sort-function :END:

When set, tags are sorted using this function as a comparator.

org-log-states-order-reversed t

:PROPERTIES: :CUSTOM_ID: org-log-states-order-reversed :END:

Non-nil means the latest state note will be directly after heading.
When nil, the state change notes will be ordered according to time.

This option can also be set with on a per-file-basis with

   #+STARTUP: logstatesreversed
   #+STARTUP: nologstatesreversed

org-agenda-max-effort nil

:PROPERTIES: :CUSTOM_ID: org-agenda-max-effort :END:

Maximum cumulated effort duration for the agenda.
This can be nil (no limit) or a number of minutes (as an integer)
or an alist of agenda types with an associated number of minutes
to limit entries to in this type.

org-export-allow-BIND (quote confirm)

:PROPERTIES: :CUSTOM_ID: org-export-allow-BIND :END:

Non-nil means allow #+BIND to define local variable values for export.
This is a potential security risk, which is why the user must confirm the
use of these lines.

org-export-taskjuggler-project-tag "taskjuggler_project"

:PROPERTIES: :CUSTOM_ID: org-export-taskjuggler-project-tag :END:

Tag, property or todo used to find the tree containing all
the tasks for the project.

org-closed-keep-when-no-todo nil

:PROPERTIES: :CUSTOM_ID: org-closed-keep-when-no-todo :END:

Remove CLOSED: time-stamp when switching back to a non-todo state?

:PROPERTIES: :CUSTOM_ID: org-tab-follows-link :END:

Non-nil means on links TAB will follow the link.
Needs to be set before org.el is loaded.
This really should not be used, it does not make sense, and the
implementation is bad.

org-odt-preferred-output-format nil

:PROPERTIES: :CUSTOM_ID: org-odt-preferred-output-format :END:

Automatically post-process to this format after exporting to "odt".
Command `org-odt-export-to-odt' exports first to "odt" format
and then uses `org-odt-convert-process' to convert the
resulting document to this format.  During customization of this
variable, the list of valid values are populated based on
`org-odt-convert-capabilities'.

You can set this option on per-file basis using file local
values.  See Info node `(emacs) File Variables'.

org-agenda-sticky nil

:PROPERTIES: :CUSTOM_ID: org-agenda-sticky :END:

Non-nil means agenda q key will bury agenda buffers.
Agenda commands will then show existing buffer instead of generating new ones.
When nil, `q' will kill the single agenda buffer.

org-closed-string "CLOSED:"

:PROPERTIES: :CUSTOM_ID: org-closed-string :END:

String used as the prefix for timestamps logging closing a TODO entry.

org-agenda-show-current-time-in-grid t

:PROPERTIES: :CUSTOM_ID: org-agenda-show-current-time-in-grid :END:

Non-nil means show the current time in the time grid.

org-protocol-project-alist nil

:PROPERTIES: :CUSTOM_ID: org-protocol-project-alist :END:

Map URLs to local filenames for `org-protocol-open-source' (open-source).

Each element of this list must be of the form:

  (module-name :property value property: value ...)

where module-name is an arbitrary name.  All the values are strings.

Possible properties are:

  :online-suffix     - the suffix to strip from the published URLs
  :working-suffix    - the replacement for online-suffix
  :base-url          - the base URL, e.g. http://www.example.com/project/
                       Last slash required.
  :working-directory - the local working directory.  This is, what base-url will
                       be replaced with.
  :redirects         - A list of cons cells, each of which maps a regular
                       expression to match to a path relative to :working-directory.

Example:

   (setq org-protocol-project-alist
       '(("http://orgmode.org/worg/"
          :online-suffix ".php"
          :working-suffix ".org"
          :base-url "http://orgmode.org/worg/"
          :working-directory "/home/user/org/Worg/")
         ("http://localhost/org-notes/"
          :online-suffix ".html"
          :working-suffix ".org"
          :base-url "http://localhost/org/"
          :working-directory "/home/user/org/"
          :rewrites (("org/?$" . "index.php")))))

   The last line tells `org-protocol-open-source' to open
   /home/user/org/index.php, if the URL cannot be mapped to an existing
   file, and ends with either "org" or "org/".

Consider using the interactive functions `org-protocol-create' and
`org-protocol-create-for-org' to help you filling this variable with valid contents.

org-export-kill-product-buffer-when-displayed nil

:PROPERTIES: :CUSTOM_ID: org-export-kill-product-buffer-when-displayed :END:

Non-nil means kill the product buffer if it is displayed immediately.
This applied to the commands `org-export-as-html-and-open' and
`org-export-as-pdf-and-open'.

org-goto-interface (quote outline)

:PROPERTIES: :CUSTOM_ID: org-goto-interface :END:

The default interface to be used for `org-goto'.
Allowed values are:
outline                  The interface shows an outline of the relevant file
                         and the correct heading is found by moving through
                         the outline or by searching with incremental search.
outline-path-completion  Headlines in the current buffer are offered via
                         completion.  This is the interface also used by
                         the refile command.

org-reverse-note-order nil

:PROPERTIES: :CUSTOM_ID: org-reverse-note-order :END:

Non-nil means store new notes at the beginning of a file or entry.
When nil, new notes will be filed to the end of a file or entry.
This can also be a list with cons cells of regular expressions that
are matched against file names, and values.

org-list-empty-line-terminates-plain-lists nil

:PROPERTIES: :CUSTOM_ID: org-list-empty-line-terminates-plain-lists :END:

Non-nil means an empty line ends all plain list levels.
Otherwise, two of them will be necessary.

org-footnote-fill-after-inline-note-extraction nil

:PROPERTIES: :CUSTOM_ID: org-footnote-fill-after-inline-note-extraction :END:

Non-nil means fill paragraphs after extracting footnotes.
When extracting inline footnotes, the lengths of lines can change a lot.
When this option is set, paragraphs from which an inline footnote has been
extracted will be filled again.

org-agenda-skip-scheduled-if-done nil

:PROPERTIES: :CUSTOM_ID: org-agenda-skip-scheduled-if-done :END:

Non-nil means don't show scheduled items in agenda when they are done.
This is relevant for the daily/weekly agenda, not for the TODO list.  And
it applies only to the actual date of the scheduling.  Warnings about
an item with a past scheduling dates are always turned off when the item
is DONE.

org-export-with-drawers nil

:PROPERTIES: :CUSTOM_ID: org-export-with-drawers :END:

Non-nil means export with drawers like the property drawer.
When t, all drawers are exported.  This may also be a list of
drawer names to export.

org-agenda-todo-keyword-format "%-1s"

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-keyword-format :END:

Format for the TODO keyword in agenda lines.
Set this to something like "%-12s" if you want all TODO keywords
to occupy a fixed space in the agenda display.

:PROPERTIES: :CUSTOM_ID: org-mouse-features :END:

The features of org-mouse that should be activated.
Changing this variable requires a restart of Emacs to get activated.

org-latex-remove-logfiles t

:PROPERTIES: :CUSTOM_ID: org-latex-remove-logfiles :END:

Non-nil means remove the logfiles produced by PDF production.
By default, logfiles are files with these extensions: .aux, .idx,
.log, .out, .toc, .nav, .snm and .vrb.  To define the set of
logfiles to remove, set `org-latex-logfiles-extensions'.

org-quote-string "QUOTE"

:PROPERTIES: :CUSTOM_ID: org-quote-string :END:

Entries starting with this keyword will be exported in fixed-width font.
Quoting applies only to the text in the entry following the headline, and does
not extend beyond the next headline, even if that is lower level.
An entry can be toggled between QUOTE and normal with
\[org-toggle-fixed-width-section].

org-calendar-follow-timestamp-change t

:PROPERTIES: :CUSTOM_ID: org-calendar-follow-timestamp-change :END:

Non-nil means make the calendar window follow timestamp changes.
When a timestamp is modified and the calendar window is visible, it will be
moved to the new date.

org-odd-levels-only nil

:PROPERTIES: :CUSTOM_ID: org-odd-levels-only :END:

Non-nil means skip even levels and only use odd levels for the outline.
This has the effect that two stars are being added/taken away in
promotion/demotion commands.  It also influences how levels are
handled by the exporters.
Changing it requires restart of `font-lock-mode' to become effective
for fontification also in regions already fontified.
You may also set this on a per-file basis by adding one of the following
lines to the buffer:

   #+STARTUP: odd
   #+STARTUP: oddeven

org-export-copy-to-kill-ring t

:PROPERTIES: :CUSTOM_ID: org-export-copy-to-kill-ring :END:

Non-nil means exported stuff will also be pushed onto the kill ring.

org-export-html-style ""

:PROPERTIES: :CUSTOM_ID: org-export-html-style :END:

Org-wide style definitions for exported HTML files.

This variable needs to contain the full HTML structure to provide a style,
including the surrounding HTML tags.  If you set the value of this variable,
you should consider to include definitions for the following classes:
 title, todo, done, timestamp, timestamp-kwd, tag, target.

For example, a valid value would be:

   

If you'd like to refer to an external style file, use something like

   

As the value of this option simply gets inserted into the HTML  header,
you can "misuse" it to add arbitrary text to the header.
See also the variable `org-export-html-style-extra'.

org-koma-letter-closing "See you soon,"

:PROPERTIES: :CUSTOM_ID: org-koma-letter-closing :END:

Koma-Letter's closing, as a string.

org-coderef-label-format "(ref:%s)"

:PROPERTIES: :CUSTOM_ID: org-coderef-label-format :END:

The default coderef format.
This format string will be used to search for coderef labels in literal
examples (EXAMPLE and SRC blocks).  The format can be overwritten in
an individual literal example with the -l option, like

#+BEGIN_SRC pascal +n -r -l "((%s))"
...
#+END_SRC

If you want to use this for HTML export, make sure that the format does
not introduce special font-locking, and avoid the HTML special
characters `<', `>', and `&'.  The reason for this restriction is that
the labels are searched for only after htmlize has done its job.

org-edit-timestamp-down-means-later nil

:PROPERTIES: :CUSTOM_ID: org-edit-timestamp-down-means-later :END:

Non-nil means S-down will increase the time in a time stamp.
When nil, S-up will increase.

org-protocol-reverse-list-of-files t

:PROPERTIES: :CUSTOM_ID: org-protocol-reverse-list-of-files :END:

Non-nil means re-reverse the list of filenames passed on the command line.
The filenames passed on the command line are passed to the emacs-server in
reverse order.  Set to t (default) to re-reverse the list, i.e. use the
sequence on the command line.  If nil, the sequence of the filenames is
unchanged.

org-capture-templates-contexts nil

:PROPERTIES: :CUSTOM_ID: org-capture-templates-contexts :END:

Alist of capture templates and valid contexts.

For example, if you have a capture template "c" and you want
this template to be accessible only from `message-mode' buffers,
use this:

   '(("c" ((in-mode . "message-mode"))))

Here are the available contexts definitions:

      in-file: command displayed only in matching files
      in-mode: command displayed only in matching modes
  not-in-file: command not displayed in matching files
  not-in-mode: command not displayed in matching modes
    in-buffer: command displayed only in matching buffers
not-in-buffer: command not displayed in matching buffers
   [function]: a custom function taking no argument

If you define several checks, the agenda command will be
accessible if there is at least one valid check.

You can also bind a key to another agenda custom command
depending on contextual rules.

    '(("c" "d" ((in-mode . "message-mode"))))

Here it means: in `message-mode buffers', use "c" as the
key for the capture template otherwise associated with "d".
(The template originally associated with "d" is not displayed
to avoid duplicates.)

org-bbdb-extract-date-fun (quote org-bbdb-anniv-extract-...

:PROPERTIES: :CUSTOM_ID: org-bbdb-extract-date-fun :END:

How to retrieve `month date year' from the anniversary field.

Customize if you have already filled your BBDB with dates
different from YYYY-MM-DD.  The function must return a list (month
date year).

org-ellipsis nil

:PROPERTIES: :CUSTOM_ID: org-ellipsis :END:

The ellipsis to use in the Org-mode outline.
When nil, just use the standard three dots.  When a string, use that instead,
When a face, use the standard 3 dots, but with the specified face.
The change affects only Org-mode (which will then use its own display table).
Changing this requires executing `M-x org-mode' in a buffer to become
effective.

org-clock-resolve-expert nil

:PROPERTIES: :CUSTOM_ID: org-clock-resolve-expert :END:

Non-nil means do not show the splash buffer with the clock resolver.

org-clock-persist nil

:PROPERTIES: :CUSTOM_ID: org-clock-persist :END:

When non-nil, save the running clock when Emacs is closed.
The clock is resumed when Emacs restarts.
When this is t, both the running clock, and the entire clock
history are saved.  When this is the symbol `clock', only the
running clock is saved.  When this is the symbol `history', only
the clock history is saved.

When Emacs restarts with saved clock information, the file containing
the running clock as well as all files mentioned in the clock history
will be visited.

All this depends on running `org-clock-persistence-insinuate' in your
Emacs initialization file.

org-use-effective-time nil

:PROPERTIES: :CUSTOM_ID: org-use-effective-time :END:

If non-nil, consider `org-extend-today-until' when creating timestamps.
For example, if `org-extend-today-until' is 8, and it's 4am, then the
"effective time" of any timestamps between midnight and 8am will be
23:59 of the previous day.

org-export-remove-timestamps-from-toc t

:PROPERTIES: :CUSTOM_ID: org-export-remove-timestamps-from-toc :END:

If t, remove timestamps from the table of contents entries.

org-html-table-data-tags (quote ("<td%s>" . "</td>"))

:PROPERTIES: :CUSTOM_ID: org-html-table-data-tags :END:

The opening tag for table data fields.
This is customizable so that alignment options can be specified.
The first %s will be filled with the scope of the field, either row or col.
The second %s will be replaced by a style entry to align the field.
See also the variable `org-html-table-align-individual-fields'.

org-archive-location "%s_archive::"

:PROPERTIES: :CUSTOM_ID: org-archive-location :END:

The location where subtrees should be archived.

The value of this variable is a string, consisting of two parts,
separated by a double-colon.  The first part is a filename and
the second part is a headline.

When the filename is omitted, archiving happens in the same file.
%s in the filename will be replaced by the current file
name (without the directory part).  Archiving to a different file
is useful to keep archived entries from contributing to the
Org-mode Agenda.

The archived entries will be filed as subtrees of the specified
headline.  When the headline is omitted, the subtrees are simply
filed away at the end of the file, as top-level entries.  Also in
the heading you can use %s to represent the file name, this can be
useful when using the same archive for a number of different files.

Here are a few examples:
"%s_archive::"
	If the current file is Projects.org, archive in file
	Projects.org_archive, as top-level trees.  This is the default.

"::* Archived Tasks"
	Archive in the current file, under the top-level headline
	"* Archived Tasks".

"~/org/archive.org::"
	Archive in file ~/org/archive.org (absolute path), as top-level trees.

"~/org/archive.org::* From %s"
	Archive in file ~/org/archive.org (absolute path), under headlines
        "From FILENAME" where file name is the current file name.

"~/org/datetree.org::datetree/* Finished Tasks"
        The "datetree/" string is special, signifying to archive
        items to the datetree.  Items are placed in either the CLOSED
        date of the item, or the current date if there is no CLOSED date.
        The heading will be a subentry to the current date.  There doesn't
        need to be a heading, but there always needs to be a slash after
        datetree.  For example, to store archived items directly in the
        datetree, use "~/org/datetree.org::datetree/".

"basement::** Finished Tasks"
	Archive in file ./basement (relative path), as level 3 trees
	below the level 2 heading "** Finished Tasks".

You may set this option on a per-file basis by adding to the buffer a
line like

#+ARCHIVE: basement::** Finished Tasks

You may also define it locally for a subtree by setting an ARCHIVE property
in the entry.  If such a property is found in an entry, or anywhere up
the hierarchy, it will be used.

org-goto-auto-isearch t

:PROPERTIES: :CUSTOM_ID: org-goto-auto-isearch :END:

Non-nil means typing characters in `org-goto' starts incremental search.
When nil, you can use these keybindings to navigate the buffer:

  q    Quit the org-goto interface
  n    Go to the next visible heading
  p    Go to the previous visible heading
  f    Go one heading forward on same level
  b    Go one heading backward on same level
  u    Go one heading up

org-export-date-timestamp-format "%Y-%m-%d"

:PROPERTIES: :CUSTOM_ID: org-export-date-timestamp-format :END:

Time string format for Org timestamps in the #+DATE option.

org-agenda-inactive-leader "["

:PROPERTIES: :CUSTOM_ID: org-agenda-inactive-leader :END:

Text preceding item pulled into the agenda by inactive time stamps.
These entries are added to the agenda when pressing "[".

org-agenda-window-setup (quote reorganize-frame)

:PROPERTIES: :CUSTOM_ID: org-agenda-window-setup :END:

How the agenda buffer should be displayed.
Possible values for this option are:

current-window    Show agenda in the current window, keeping all other windows.
other-window      Use `switch-to-buffer-other-window' to display agenda.
reorganize-frame  Show only two windows on the current frame, the current
                  window and the agenda.
other-frame       Use `switch-to-buffer-other-frame' to display agenda.
                  Also, when exiting the agenda, kill that frame.
See also the variable `org-agenda-restore-windows-after-quit'.

org-tags-match-list-sublevels t

:PROPERTIES: :CUSTOM_ID: org-tags-match-list-sublevels :END:

Non-nil means list also sublevels of headlines matching a search.
This variable applies to tags/property searches, and also to stuck
projects because this search is based on a tags match as well.

When set to the symbol `indented', sublevels are indented with
leading dots.

Because of tag inheritance (see variable `org-use-tag-inheritance'),
the sublevels of a headline matching a tag search often also match
the same search.  Listing all of them can create very long lists.
Setting this variable to nil causes subtrees of a match to be skipped.

This variable is semi-obsolete and probably should always be true.  It
is better to limit inheritance to certain tags using the variables
`org-use-tag-inheritance' and `org-tags-exclude-from-inheritance'.

org-habit-show-done-always-green nil

:PROPERTIES: :CUSTOM_ID: org-habit-show-done-always-green :END:

Non-nil means DONE days will always be green in the consistency graph.
It will be green even if it was done after the deadline.

org-custom-properties nil

:PROPERTIES: :CUSTOM_ID: org-custom-properties :END:

List of properties (as strings) with a special meaning.
The default use of these custom properties is to let the user
hide them with `org-toggle-custom-properties-visibility'.

org-html-footnote-separator "<sup>, </sup>"

:PROPERTIES: :CUSTOM_ID: org-html-footnote-separator :END:

Text used to separate footnotes.

org-adapt-indentation t

:PROPERTIES: :CUSTOM_ID: org-adapt-indentation :END:

Non-nil means adapt indentation to outline node level.

When this variable is set, Org assumes that you write outlines by
indenting text in each node to align with the headline (after the stars).
The following issues are influenced by this variable:

- When this is set and the *entire* text in an entry is indented, the
  indentation is increased by one space in a demotion command, and
  decreased by one in a promotion command.  If any line in the entry
  body starts with text at column 0, indentation is not changed at all.

- Property drawers and planning information is inserted indented when
  this variable s set.  When nil, they will not be indented.

- TAB indents a line relative to context.  The lines below a headline
  will be indented when this variable is set.

Note that this is all about true indentation, by adding and removing
space characters.  See also `org-indent.el' which does level-dependent
indentation in a virtual way, i.e. at display time in Emacs.

org-export-select-tags (quote ("export"))

:PROPERTIES: :CUSTOM_ID: org-export-select-tags :END:

Tags that select a tree for export.
If any such tag is found in a buffer, all trees that do not carry one
of these tags will be deleted before export.
Inside trees that are selected like this, you can still deselect a
subtree by tagging it with one of the `org-export-exclude-tags'.

org-agenda-entry-text-leaders " > "

:PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-leaders :END:

Text prepended to the entry text in agenda buffers.

org-odt-convert-capabilities (quote (("Text" ("odt" "ott" "...

:PROPERTIES: :CUSTOM_ID: org-odt-convert-capabilities :END:

Specify input and output formats of `org-odt-convert-process'.
More correctly, specify the set of input and output formats that
the user is actually interested in.

This variable is an alist where each element is of the
form (DOCUMENT-CLASS INPUT-FMT-LIST OUTPUT-FMT-ALIST).
INPUT-FMT-LIST is a list of INPUT-FMTs.  OUTPUT-FMT-ALIST is an
alist where each element is of the form (OUTPUT-FMT
OUTPUT-FILE-EXTENSION EXTRA-OPTIONS).

The variable is interpreted as follows:
`org-odt-convert-process' can take any document that is in
INPUT-FMT-LIST and produce any document that is in the
OUTPUT-FMT-LIST.  A document converted to OUTPUT-FMT will have
OUTPUT-FILE-EXTENSION as the file name extension.  OUTPUT-FMT
serves dual purposes:
- It is used for populating completion candidates during
  `org-odt-convert' commands.
- It is used as the value of "%f" specifier in
  `org-odt-convert-process'.

EXTRA-OPTIONS is used as the value of "%x" specifier in
`org-odt-convert-process'.

DOCUMENT-CLASS is used to group a set of file formats in
INPUT-FMT-LIST in to a single class.

Note that this variable inherently captures how LibreOffice based
converters work.  LibreOffice maps documents of various formats
to classes like Text, Web, Spreadsheet, Presentation etc and
allow document of a given class (irrespective of it's source
format) to be converted to any of the export formats associated
with that class.

See default setting of this variable for an typical
configuration.

org-export-run-in-background nil

:PROPERTIES: :CUSTOM_ID: org-export-run-in-background :END:

Non-nil means export and publishing commands will run in background.
This works by starting up a separate Emacs process visiting the same file
and doing the export from there.
Not all export commands are affected by this - only the ones which
actually write to a file, and that do not depend on the buffer state.
\
If this option is nil, you can still get background export by calling
`org-export' with a double prefix arg: \[universal-argument] \[universal-argument] \[org-export].

If this option is t, the double prefix can be used to exceptionally
force an export command into the current process.

org-clock-frame-title-format (quote (t org-mode-line-string...

:PROPERTIES: :CUSTOM_ID: org-clock-frame-title-format :END:

The value for `frame-title-format' when clocking in.

When `org-clock-clocked-in-display' is set to 'frame-title
or 'both, clocking in will replace `frame-title-format' with
this value.  Clocking out will restore `frame-title-format'.

`org-frame-title-string' is a format string using the same
specifications than `frame-title-format', which see.

org-agenda-export-html-style nil

:PROPERTIES: :CUSTOM_ID: org-agenda-export-html-style :END:

The style specification for exported HTML Agenda files.
If this variable contains a string, it will replace the default 

or, if you want to keep the style in a file,

   

As the value of this option simply gets inserted into the HTML  header,
you can "misuse" it to also add other text to the header.

:PROPERTIES: :CUSTOM_ID: org-context-in-file-links :END:

Non-nil means file links from `org-store-link' contain context.
A search string will be added to the file name with :: as separator and
used to find the context when the link is activated by the command
`org-open-at-point'.  When this option is t, the entire active region
will be placed in the search string of the file link.  If set to a
positive integer, only the first n lines of context will be stored.

Using a prefix arg to the command \[org-store-link] (`org-store-link')
negates this setting for the duration of the command.

org-id-search-archives t

:PROPERTIES: :CUSTOM_ID: org-id-search-archives :END:

Non-nil means search also the archive files of agenda files for entries.
This is a possibility to reduce overhead, but it means that entries moved
to the archives can no longer be found by ID.
This variable is only relevant when `org-id-track-globally' is set.

org-babel-noweb-wrap-end ">>"

:PROPERTIES: :CUSTOM_ID: org-babel-noweb-wrap-end :END:

String used to end a noweb reference in a code block.
See also `org-babel-noweb-wrap-start'.

org-beamer-column-view-format "%45ITEM %10BEAMER_env(Env) %1...

:PROPERTIES: :CUSTOM_ID: org-beamer-column-view-format :END:

Column view format that should be used to fill the template.

org-ascii-verbatim-format "`%s'"

:PROPERTIES: :CUSTOM_ID: org-ascii-verbatim-format :END:

Format string used for verbatim text and inline code.

org-icalendar-include-todo nil

:PROPERTIES: :CUSTOM_ID: org-icalendar-include-todo :END:

Non-nil means create VTODO components from TODO items.

Valid values are:
nil                  don't include any task.
t                    include tasks that are not in DONE state.
`unblocked'          include all TODO items that are not blocked.
`all'                include both done and not done items.

org-agenda-scheduled-leaders (quote ("Scheduled: " "Sched.%...

:PROPERTIES: :CUSTOM_ID: org-agenda-scheduled-leaders :END:

Text preceding scheduled items in the agenda view.
This is a list with two strings.  The first applies when the item is
scheduled on the current day.  The second applies when it has been scheduled
previously, it may contain a %d indicating that this is the nth time that
this item is scheduled, due to automatic rescheduling of unfinished items
for the following day.  So this number is one larger than the number of days
that passed since this item was scheduled first.

org-startup-truncated t

:PROPERTIES: :CUSTOM_ID: org-startup-truncated :END:

Non-nil means entering Org-mode will set `truncate-lines'.
This is useful since some lines containing links can be very long and
uninteresting.  Also tables look terrible when wrapped.

org-export-with-tags (quote not-in-toc)

:PROPERTIES: :CUSTOM_ID: org-export-with-tags :END:

If nil, do not export tags, just remove them from headlines.
If this is the symbol `not-in-toc', tags will be removed from table of
contents entries, but still be shown in the headlines of the document.

This option can also be set with the +OPTIONS line, e.g. "tags:nil".

org-cycle-level-after-item/entry-creation t

:PROPERTIES: :CUSTOM_ID: org-cycle-level-after-item/entry-creation :END:

Non-nil means cycle entry level or item indentation in new empty entries.

When the cursor is at the end of an empty headline, i.e., with only stars
and maybe a TODO keyword, TAB will then switch the entry to become a child,
and then all possible ancestor states, before returning to the original state.
This makes data entry extremely fast:  M-RET to create a new headline,
on TAB to make it a child, two or more tabs to make it a (grand-)uncle.

When the cursor is at the end of an empty plain list item, one TAB will
make it a subitem, two or more tabs will back up to make this an item
higher up in the item hierarchy.

org-clock-mode-line-total (quote auto)

:PROPERTIES: :CUSTOM_ID: org-clock-mode-line-total :END:

Default setting for the time included for the mode line clock.
This can be overruled locally using the CLOCK_MODELINE_TOTAL property.
Allowed values are:

current  Only the time in the current instance of the clock
today    All time clocked into this task today
repeat   All time clocked into this task since last repeat
all      All time ever recorded for this task
auto     Automatically, either `all', or `repeat' for repeating tasks

org-export-html-toplevel-hlevel 2

:PROPERTIES: :CUSTOM_ID: org-export-html-toplevel-hlevel :END:

The  level for level 1 headings in HTML export.
This is also important for the classes that will be wrapped around headlines
and outline structure.  If this variable is 1, the top-level headlines will
be 

, and the corresponding classes will be outline-1, section-number-1, and outline-text-1. If this is 2, all of these will get a 2 instead. The default for this variable is 2, because we use

for formatting the document title.

org-html-toplevel-hlevel 2

:PROPERTIES: :CUSTOM_ID: org-html-toplevel-hlevel :END:

The  level for level 1 headings in HTML export.
This is also important for the classes that will be wrapped around headlines
and outline structure.  If this variable is 1, the top-level headlines will
be 

, and the corresponding classes will be outline-1, section-number-1, and outline-text-1. If this is 2, all of these will get a 2 instead. The default for this variable is 2, because we use

for formatting the document title.

org-complete-tags-always-offer-all-agenda-tags nil

:PROPERTIES: :CUSTOM_ID: org-complete-tags-always-offer-all-agenda-tags :END:

If non-nil, always offer completion for all tags of all agenda files.
Instead of customizing this variable directly, you might want to
set it locally for capture buffers, because there no list of
tags in that file can be created dynamically (there are none).

  (add-hook 'org-capture-mode-hook
            (lambda ()
              (set (make-local-variable
                    'org-complete-tags-always-offer-all-agenda-tags)
                   t)))

org-ditaa-jar-path (expand-file-name "ditaa.jar" ...

:PROPERTIES: :CUSTOM_ID: org-ditaa-jar-path :END:

org-goto-max-level 5

:PROPERTIES: :CUSTOM_ID: org-goto-max-level :END:

Maximum target level when running `org-goto' with refile interface.

org-completion-use-iswitchb nil

:PROPERTIES: :CUSTOM_ID: org-completion-use-iswitchb :END:

Non-nil means use iswitchb completion wherever possible.
Note that `iswitchb-mode' must be active for this variable to be relevant.
If you decide to turn this variable on, you might well want to turn off
`org-outline-path-complete-in-steps'.
Note that this variable has only an effect if `org-completion-use-ido' is nil.

org-agenda-menu-two-columns nil

:PROPERTIES: :CUSTOM_ID: org-agenda-menu-two-columns :END:

Non-nil means, use two columns to show custom commands in the dispatcher.
If you use this, you probably want to set `org-agenda-menu-show-matcher'
to nil.

org-export-html-preamble-format (quote (("en" "")))

:PROPERTIES: :CUSTOM_ID: org-export-html-preamble-format :END:

Alist of languages and format strings for the HTML preamble.

To enable the HTML exporter to use these formats, you need to set
`org-export-html-preamble' to `t'.

The first element of each list is the language code, as used for
the #+LANGUAGE keyword.

The second element of each list is a format string to format the
preamble itself.  This format string can contain these elements:

%t stands for the title.
%a stands for the author's name.
%e stands for the author's email.
%d stands for the date.

If you need to use a "%" character, you need to escape it
like that: "%%".

org-feed-drawer "FEEDSTATUS"

:PROPERTIES: :CUSTOM_ID: org-feed-drawer :END:

The name of the drawer for feed status information.
Each feed may also specify its own drawer name using the `:drawer'
parameter in `org-feed-alist'.
Note that in order to make these drawers behave like drawers, they must
be added to the variable `org-drawers' or configured with a #+DRAWERS
line.

org-html-creator-string (format "<a href=\"http://www....

:PROPERTIES: :CUSTOM_ID: org-html-creator-string :END:

Information about the creator of the HTML document.
This option can also be set on with the CREATOR keyword.

org-src-ask-before-returning-to-edit-buffer t

:PROPERTIES: :CUSTOM_ID: org-src-ask-before-returning-to-edit-buffer :END:

If nil, when org-edit-src code is used on a block that already
has an active edit buffer, it will switch to that edit buffer
immediately; otherwise it will ask whether you want to return to
the existing edit buffer.

org-clock-heading-function nil

:PROPERTIES: :CUSTOM_ID: org-clock-heading-function :END:

When non-nil, should be a function to create `org-clock-heading'.
This is the string shown in the mode line when a clock is running.
The function is called with point at the beginning of the headline.

org-id-track-globally t

:PROPERTIES: :CUSTOM_ID: org-id-track-globally :END:

Non-nil means track IDs through files, so that links work globally.
This work by maintaining a hash table for IDs and writing this table
to disk when exiting Emacs.  Because of this, it works best if you use
a single Emacs process, not many.

When nil, IDs are not tracked.  Links to IDs will still work within
a buffer, but not if the entry is located in another file.
IDs can still be used if the entry with the id is in the same file as
the link.

org-icalendar-combined-agenda-file "~/org.ics"

:PROPERTIES: :CUSTOM_ID: org-icalendar-combined-agenda-file :END:

The file name for the iCalendar file covering all agenda files.
This file is created with the command \[org-icalendar-combine-agenda-files].
The file name should be absolute.  It will be overwritten without warning.

org-table-formula-field-format "%s"

:PROPERTIES: :CUSTOM_ID: org-table-formula-field-format :END:

Format for fields which contain the result of a formula.
For example, using "~%s~" will display the result within tilde
characters.  Beware that modifying the display can prevent the
field from being used in another formula.

org-list-radio-list-templates (quote ((latex-mode "% BEGIN R...

:PROPERTIES: :CUSTOM_ID: org-list-radio-list-templates :END:

Templates for radio lists in different major modes.
All occurrences of %n in a template will be replaced with the name of the
list, obtained by prompting the user.

org-agenda-exporter-settings nil

:PROPERTIES: :CUSTOM_ID: org-agenda-exporter-settings :END:

Alist of variable/value pairs that should be active during agenda export.
This is a good place to set options for ps-print and for htmlize.
Note that the way this is implemented, the values will be evaluated
before assigned to the variables.  So make sure to quote values you do
*not* want evaluated, for example

   (setq org-agenda-exporter-settings
         '((ps-print-color-p 'black-white)))

org-time-clocksum-fractional-format "%.2f"

:PROPERTIES: :CUSTOM_ID: org-time-clocksum-fractional-format :END:

The format string used when creating CLOCKSUM lines,
or when Org mode generates a time duration, if
`org-time-clocksum-use-fractional' is enabled.

The value can be a single format string containing one
%-sequence, which will be filled with the number of hours as
a float.

Alternatively, the value can be a plist associating any of the
keys :years, :months, :weeks, :days, :hours or :minutes with
a format string.  The time duration is formatted using the
largest time unit which gives a non-zero integer part.  If all
specified formats have zero integer part, the smallest time unit
is used.

org-html-html5-fancy nil

:PROPERTIES: :CUSTOM_ID: org-html-html5-fancy :END:

Non-nil means using new HTML5 elements.
This variable is ignored for anything other than HTML5 export.

For compatibility with Internet Explorer, it's probably a good
idea to download some form of the html5shiv (for instance
https://code.google.com/p/html5shiv/) and add it to your
HTML_HEAD_EXTRA, so that your pages don't break for users of IE
versions 8 and below.

org-agenda-skip-archived-trees t

:PROPERTIES: :CUSTOM_ID: org-agenda-skip-archived-trees :END:

Non-nil means the agenda will skip any items located in archived trees.
An archived tree is a tree marked with the tag ARCHIVE.  The use of this
variable is no longer recommended, you should leave it at the value t.
Instead, use the key `v' to cycle the archives-mode in the agenda.

org-mobile-use-encryption nil

:PROPERTIES: :CUSTOM_ID: org-mobile-use-encryption :END:

Non-nil means keep only encrypted files on the WebDAV server.
Encryption uses AES-256, with a password given in
`org-mobile-encryption-password'.
When nil, plain files are kept on the server.
Turning on encryption requires to set the same password in the MobileOrg
application.  Before turning this on, check of MobileOrg does already
support it - at the time of this writing it did not yet.

org-properties-postprocess-alist nil

:PROPERTIES: :CUSTOM_ID: org-properties-postprocess-alist :END:

Alist of properties and functions to adjust inserted values.
Elements of this alist must be of the form

  ([string] [function])

where [string] must be a property name and [function] must be a
lambda expression: this lambda expression must take one argument,
the value to adjust, and return the new value as a string.

For example, this element will allow the property "Remaining"
to be updated wrt the relation between the "Effort" property
and the clock summary:

 (("Remaining" (lambda(value)
                   (let ((clocksum (org-clock-sum-current-item))
                         (effort (org-duration-string-to-minutes
                                   (org-entry-get (point) "Effort"))))
                     (org-minutes-to-clocksum-string (- effort clocksum))))))

org-agenda-entry-text-maxlines 5

:PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-maxlines :END:

Number of text lines to be added when `E' is pressed in the agenda.

Note that this variable only used during agenda display.  Add add entry text
when exporting the agenda, configure the variable
`org-agenda-add-entry-ext-maxlines'.

org-infojs-options (mapcar (lambda (x) (cons (car...

:PROPERTIES: :CUSTOM_ID: org-infojs-options :END:

Options settings for the INFOJS JavaScript.
Each of the options must have an entry in `org-export-html/infojs-opts-table'.
The value can either be a string that will be passed to the script, or
a property.  This property is then assumed to be a property that is defined
by the Export/Publishing setup of Org.
The `sdepth' and `tdepth' parameters can also be set to "max", which
means to use the maximum value consistent with other options.

org-id-method (quote uuid)

:PROPERTIES: :CUSTOM_ID: org-id-method :END:

The method that should be used to create new IDs.

An ID will consist of the optional prefix specified in `org-id-prefix',
and a unique part created by the method this variable specifies.

Allowed values are:

org        Org's own internal method, using an encoding of the current time to
           microsecond accuracy, and optionally the current domain of the
           computer.  See the variable `org-id-include-domain'.

uuid       Create random (version 4) UUIDs.  If the program defined in
           `org-id-uuid-program' is available it is used to create the ID.
           Otherwise an internal functions is used.

org-enable-fixed-width-editor t

:PROPERTIES: :CUSTOM_ID: org-enable-fixed-width-editor :END:

Non-nil means lines starting with ":" are treated as fixed-width.
This currently only means they are never auto-wrapped.
When nil, such lines will be treated like ordinary lines.
See also the QUOTE keyword.

org-refile-targets nil

:PROPERTIES: :CUSTOM_ID: org-refile-targets :END:

Targets for refiling entries with \[org-refile].
This is a list of cons cells.  Each cell contains:
- a specification of the files to be considered, either a list of files,
  or a symbol whose function or variable value will be used to retrieve
  a file name or a list of file names.  If you use `org-agenda-files' for
  that, all agenda files will be scanned for targets.  Nil means consider
  headings in the current buffer.
- A specification of how to find candidate refile targets.  This may be
  any of:
  - a cons cell (:tag . "TAG") to identify refile targets by a tag.
    This tag has to be present in all target headlines, inheritance will
    not be considered.
  - a cons cell (:todo . "KEYWORD") to identify refile targets by
    todo keyword.
  - a cons cell (:regexp . "REGEXP") with a regular expression matching
    headlines that are refiling targets.
  - a cons cell (:level . N).  Any headline of level N is considered a target.
    Note that, when `org-odd-levels-only' is set, level corresponds to
    order in hierarchy, not to the number of stars.
  - a cons cell (:maxlevel . N).  Any headline with level <= N is a target.
    Note that, when `org-odd-levels-only' is set, level corresponds to
    order in hierarchy, not to the number of stars.

Each element of this list generates a set of possible targets.
The union of these sets is presented (with completion) to
the user by `org-refile'.

You can set the variable `org-refile-target-verify-function' to a function
to verify each headline found by the simple criteria above.

When this variable is nil, all top-level headlines in the current buffer
are used, equivalent to the value `((nil . (:level . 1))'.

org-latex-toc-command "\\tableofcontents\n\n"

:PROPERTIES: :CUSTOM_ID: org-latex-toc-command :END:

LaTeX command to set the table of contents, list of figures, etc.
This command only applies to the table of contents generated with
the toc:nil option, not to those generated with #+TOC keyword.

org-html-footnote-format "<sup>%s</sup>"

:PROPERTIES: :CUSTOM_ID: org-html-footnote-format :END:

The format for the footnote reference.
%s will be replaced by the footnote reference itself.

org-ascii-table-use-ascii-art nil

:PROPERTIES: :CUSTOM_ID: org-ascii-table-use-ascii-art :END:

Non-nil means table.el tables are turned into ascii-art.

It only makes sense when export charset is `utf-8'.  It is nil by
default since it requires ascii-art-to-unicode.el package.  You
can download it here:

  http://gnuvola.org/software/j/aa2u/ascii-art-to-unicode.el.

org-html-htmlize-output-type (quote inline-css)

:PROPERTIES: :CUSTOM_ID: org-html-htmlize-output-type :END:

Output type to be used by htmlize when formatting code snippets.
Choices are `css', to export the CSS selectors only, or `inline-css', to
export the CSS attribute values inline in the HTML.  We use as default
`inline-css', in order to make the resulting HTML self-containing.

However, this will fail when using Emacs in batch mode for export, because
then no rich font definitions are in place.  It will also not be good if
people with different Emacs setup contribute HTML files to a website,
because the fonts will represent the individual setups.  In these cases,
it is much better to let Org/Htmlize assign classes only, and to use
a style file to define the look of these classes.
To get a start for your css file, start Emacs session and make sure that
all the faces you are interested in are defined, for example by loading files
in all modes you want.  Then, use the command
\[org-html-htmlize-generate-css] to extract class definitions.

org-id-include-domain nil

:PROPERTIES: :CUSTOM_ID: org-id-include-domain :END:

Non-nil means add the domain name to new IDs.
This ensures global uniqueness of IDs, and is also suggested by
RFC 2445 in combination with RFC 822.  This is only relevant if
`org-id-method' is `org'.  When uuidgen is used, the domain will never
be added.
The default is to not use this because we have no really good way to get
the true domain, and Org entries will normally not be shared with enough
people to make this necessary.

org-imenu-depth 2

:PROPERTIES: :CUSTOM_ID: org-imenu-depth :END:

The maximum level for Imenu access to Org-mode headlines.
This also applied for speedbar access.

org-mark-ring-length 4

:PROPERTIES: :CUSTOM_ID: org-mark-ring-length :END:

Number of different positions to be recorded in the ring.
Changing this requires a restart of Emacs to work correctly.

org-html-metadata-timestamp-format "%Y-%m-%d %a %H:%M"

:PROPERTIES: :CUSTOM_ID: org-html-metadata-timestamp-format :END:

Format used for timestamps in preamble, postamble and metadata.
See `format-time-string' for more information on its components.

org-agenda-ignore-drawer-properties nil

:PROPERTIES: :CUSTOM_ID: org-agenda-ignore-drawer-properties :END:

Avoid updating text properties when building the agenda.
Properties are used to prepare buffers for effort estimates, appointments,
and subtree-local categories.
If you don't use these in the agenda, you can add them to this list and
agenda building will be a bit faster.
The value is a list, with zero or more of the symbols `effort', `appt',
or `category'.

org-modules (quote (org-w3m org-bbdb org-b...

:PROPERTIES: :CUSTOM_ID: org-modules :END:

Modules that should always be loaded together with org.el.

If a description starts with , the file is not part of Emacs
and loading it will require that you have downloaded and properly
installed the Org mode distribution.

You can also use this system to load external packages (i.e. neither Org
core modules, nor modules from the CONTRIB directory).  Just add symbols
to the end of the list.  If the package is called org-xyz.el, then you need
to add the symbol `xyz', and the package must have a call to:

   (provide 'org-xyz)

For export specific modules, see also `org-export-backends'.

:PROPERTIES: :CUSTOM_ID: org-html-link-home :END:

Where should the "HOME" link of exported HTML pages lead?

org-bibtex-no-export-tags nil

:PROPERTIES: :CUSTOM_ID: org-bibtex-no-export-tags :END:

List of tag(s) that should not be converted to keywords.
This variable is relevant only if `org-bibtex-export-tags-as-keywords' is t.

org-use-extra-keys nil

:PROPERTIES: :CUSTOM_ID: org-use-extra-keys :END:

Non-nil means use extra key sequence definitions for certain commands.
This happens automatically if you run XEmacs or if `window-system'
is nil.  This variable lets you do the same manually.  You must
set it before loading org.

Example: on Carbon Emacs 22 running graphically, with an external
keyboard on a Powerbook, the default way of setting M-left might
not work for either Alt or ESC.  Setting this variable will make
it work for ESC.

org-export-html-protect-char-alist (quote (("&" . "&amp;") ("<" ....

:PROPERTIES: :CUSTOM_ID: org-export-html-protect-char-alist :END:

Alist of characters to be converted by `org-html-protect'.

org-babel-noweb-wrap-start "<<"

:PROPERTIES: :CUSTOM_ID: org-babel-noweb-wrap-start :END:

String used to begin a noweb reference in a code block.
See also `org-babel-noweb-wrap-end'.

org-agenda-use-time-grid t

:PROPERTIES: :CUSTOM_ID: org-agenda-use-time-grid :END:

Non-nil means show a time grid in the agenda schedule.
A time grid is a set of lines for specific times (like every two hours between
8:00 and 20:00).  The items scheduled for a day at specific times are
sorted in between these lines.
For details about when the grid will be shown, and what it will look like, see
the variable `org-agenda-time-grid'.

org-icalendar-include-bbdb-anniversaries nil

:PROPERTIES: :CUSTOM_ID: org-icalendar-include-bbdb-anniversaries :END:

Non-nil means a combined iCalendar file should include anniversaries.
The anniversaries are defined in the BBDB database.

org-export-prefer-native-exporter-for-tables nil

:PROPERTIES: :CUSTOM_ID: org-export-prefer-native-exporter-for-tables :END:

Non-nil means always export tables created with table.el natively.
Natively means use the HTML code generator in table.el.
When nil, Org-mode's own HTML generator is used when possible (i.e. if
the table does not use row- or column-spanning).  This has the
advantage, that the automatic HTML conversions for math symbols and
sub/superscripts can be applied.  Org-mode's HTML generator is also
much faster.  The LaTeX exporter always use the native exporter for
table.el tables.

org-highest-priority 65

:PROPERTIES: :CUSTOM_ID: org-highest-priority :END:

The highest priority of TODO items.  A character like ?A, ?B etc.
Must have a smaller ASCII number than `org-lowest-priority'.

org-table-copy-increment t

:PROPERTIES: :CUSTOM_ID: org-table-copy-increment :END:

Non-nil means increment when copying current field with \[org-table-copy-down].

org-agenda-custom-commands (quote (("n" "Agenda and all T...

:PROPERTIES: :CUSTOM_ID: org-agenda-custom-commands :END:

Custom commands for the agenda.
These commands will be offered on the splash screen displayed by the
agenda dispatcher \[org-agenda].  Each entry is a list like this:

   (key desc type match settings files)

key      The key (one or more characters as a string) to be associated
         with the command.
desc     A description of the command, when omitted or nil, a default
         description is built using MATCH.
type     The command type, any of the following symbols:
          agenda      The daily/weekly agenda.
          todo        Entries with a specific TODO keyword, in all agenda files.
          search      Entries containing search words entry or headline.
          tags        Tags/Property/TODO match in all agenda files.
          tags-todo   Tags/P/T match in all agenda files, TODO entries only.
          todo-tree   Sparse tree of specific TODO keyword in *current* file.
          tags-tree   Sparse tree with all tags matches in *current* file.
          occur-tree  Occur sparse tree for *current* file.
          ...         A user-defined function.
match    What to search for:
          - a single keyword for TODO keyword searches
          - a tags match expression for tags searches
          - a word search expression for text searches.
          - a regular expression for occur searches
          For all other commands, this should be the empty string.
settings  A list of option settings, similar to that in a let form, so like
          this: ((opt1 val1) (opt2 val2) ...).   The values will be
          evaluated at the moment of execution, so quote them when needed.
files     A list of files file to write the produced agenda buffer to
          with the command `org-store-agenda-views'.
          If a file name ends in ".html", an HTML version of the buffer
          is written out.  If it ends in ".ps", a postscript version is
          produced.  Otherwise, only the plain text is written to the file.

You can also define a set of commands, to create a composite agenda buffer.
In this case, an entry looks like this:

  (key desc (cmd1 cmd2 ...) general-settings-for-whole-set files)

where

desc   A description string to be displayed in the dispatcher menu.
cmd    An agenda command, similar to the above.  However, tree commands
       are not allowed, but instead you can get agenda and global todo list.
       So valid commands for a set are:
       (agenda "" settings)
       (alltodo "" settings)
       (stuck "" settings)
       (todo "match" settings files)
       (search "match" settings files)
       (tags "match" settings files)
       (tags-todo "match" settings files)

Each command can carry a list of options, and another set of options can be
given for the whole set of commands.  Individual command options take
precedence over the general options.

When using several characters as key to a command, the first characters
are prefix commands.  For the dispatcher to display useful information, you
should provide a description for the prefix, like

 (setq org-agenda-custom-commands
   '(("h" . "HOME + Name tag searches") ; describe prefix "h"
     ("hl" tags "+HOME+Lisa")
     ("hp" tags "+HOME+Peter")
     ("hk" tags "+HOME+Kim")))

org-latex-table-caption-above t

:PROPERTIES: :CUSTOM_ID: org-latex-table-caption-above :END:

When non-nil, place caption string at the beginning of the table.
Otherwise, place it near the end.

org-clocktable-defaults =(list maxlevel 2

:PROPERTIES: :CUSTOM_ID: org-clocktable-defaults :END:

Default properties for clock tables.

org-babel-process-comment-text (function org-babel-trim)

:PROPERTIES: :CUSTOM_ID: org-babel-process-comment-text :END:

Function called to process raw Org-mode text collected to be
inserted as comments in tangled source-code files.  The function
should take a single string argument and return a string
result.  The default value is `org-babel-trim'.

org-crypt-tag-matcher "crypt"

:PROPERTIES: :CUSTOM_ID: org-crypt-tag-matcher :END:

The tag matcher used to find headings whose contents should be encrypted.

See the "Match syntax" section of the org manual for more details.

org-clock-continuously nil

:PROPERTIES: :CUSTOM_ID: org-clock-continuously :END:

Non-nil means to start clocking from the last clock-out time, if any.

org-html-infojs-template "<script type=\"text/javascrip...

:PROPERTIES: :CUSTOM_ID: org-html-infojs-template :END:

The template for the export style additions when org-info.js is used.
Option settings will replace the %MANAGER-OPTIONS cookie.

org-agenda-start-with-log-mode nil

:PROPERTIES: :CUSTOM_ID: org-agenda-start-with-log-mode :END:

The initial value of log-mode in a newly created agenda window.
See `org-agenda-log-mode' and `org-agenda-log-mode-items' for further
explanations on the possible values.

org-html-use-infojs (quote when-configured)

:PROPERTIES: :CUSTOM_ID: org-html-use-infojs :END:

Non-nil when Sebastian Rose's Java Script org-info.js should be active.
This option can be nil or t to never or always use the script.
It can also be the symbol `when-configured', meaning that the
script will be linked into the export file if and only if there
is a "#+INFOJS_OPT:" line in the buffer.  See also the variable
`org-html-infojs-options'.

org-confirm-babel-evaluate t

:PROPERTIES: :CUSTOM_ID: org-confirm-babel-evaluate :END:

Confirm before evaluation.
Require confirmation before interactively evaluating code
blocks in Org-mode buffers.  The default value of this variable
is t, meaning confirmation is required for any code block
evaluation.  This variable can be set to nil to inhibit any
future confirmation requests.  This variable can also be set to a
function which takes two arguments the language of the code block
and the body of the code block.  Such a function should then
return a non-nil value if the user should be prompted for
execution or nil if no prompt is required.

Warning: Disabling confirmation may result in accidental
evaluation of potentially harmful code.  It may be advisable
remove code block execution from C-c C-c as further protection
against accidental code block evaluation.  The
`org-babel-no-eval-on-ctrl-c-ctrl-c' variable can be used to
remove code block execution from the C-c C-c keybinding.

org-timer-default-timer 0

:PROPERTIES: :CUSTOM_ID: org-timer-default-timer :END:

The default timer when a timer is set.
When 0, the user is prompted for a value.

org-ascii-headline-spacing (quote (1 . 2))

:PROPERTIES: :CUSTOM_ID: org-ascii-headline-spacing :END:

Number of blank lines inserted around headlines.

This variable can be set to a cons cell.  In that case, its car
represents the number of blank lines present before headline
contents whereas its cdr reflects the number of blank lines after
contents.

A nil value replicates the number of blank lines found in the
original Org buffer at the same place.

org-export-taskjuggler-default-project-version "1.0"

:PROPERTIES: :CUSTOM_ID: org-export-taskjuggler-default-project-version :END:

Default version string for the project.

org-read-date-force-compatible-dates t

:PROPERTIES: :CUSTOM_ID: org-read-date-force-compatible-dates :END:

Should date/time prompt force dates that are guaranteed to work in Emacs?

Depending on the system Emacs is running on, certain dates cannot
be represented with the type used internally to represent time.
Dates between 1970-1-1 and 2038-1-1 can always be represented
correctly.  Some systems allow for earlier dates, some for later,
some for both.  One way to find out it to insert any date into an
Org buffer, putting the cursor on the year and hitting S-up and
S-down to test the range.

When this variable is set to t, the date/time prompt will not let
you specify dates outside the 1970-2037 range, so it is certain that
these dates will work in whatever version of Emacs you are
running, and also that you can move a file from one Emacs implementation
to another.  WHenever Org is forcing the year for you, it will display
a message and beep.

When this variable is nil, Org will check if the date is
representable in the specific Emacs implementation you are using.
If not, it will force a year, usually the current year, and beep
to remind you.  Currently this setting is not recommended because
the likelihood that you will open your Org files in an Emacs that
has limited date range is not negligible.

A workaround for this problem is to use diary sexp dates for time
stamps outside of this range.

org-export-with-toc t

:PROPERTIES: :CUSTOM_ID: org-export-with-toc :END:

Non-nil means create a table of contents in exported files.
The TOC contains headlines with levels up to`org-export-headline-levels'.
When an integer, include levels up to N in the toc, this may then be
different from `org-export-headline-levels', but it will not be allowed
to be larger than the number of headline levels.
When nil, no table of contents is made.

Headlines which contain any TODO items will be marked with "(*)" in
ASCII export, and with red color in HTML output, if the option
`org-export-mark-todo-in-toc' is set.

In HTML output, the TOC will be clickable.

This option can also be set with the +OPTIONS line, e.g. "toc:nil"
or "toc:3".

org-export-html-inline-images (quote maybe)

:PROPERTIES: :CUSTOM_ID: org-export-html-inline-images :END:

Non-nil means inline images into exported HTML pages.
This is done using an  tag.  When nil, an anchor with href is used to
link to the image.  If this option is `maybe', then images in links with
an empty description will be inlined, while images with a description will
be linked only.

org-src-window-setup (quote reorganize-frame)

:PROPERTIES: :CUSTOM_ID: org-src-window-setup :END:

How the source code edit buffer should be displayed.
Possible values for this option are:

current-window    Show edit buffer in the current window, keeping all other
                  windows.
other-window      Use `switch-to-buffer-other-window' to display edit buffer.
reorganize-frame  Show only two windows on the current frame, the current
                  window and the edit buffer.  When exiting the edit buffer,
                  return to one window.
other-frame       Use `switch-to-buffer-other-frame' to display edit buffer.
                  Also, when exiting the edit buffer, kill that frame.

org-enable-priority-commands t

:PROPERTIES: :CUSTOM_ID: org-enable-priority-commands :END:

Non-nil means priority commands are active.
When nil, these commands will be disabled, so that you never accidentally
set a priority.

org-export-exclude-tags (quote ("noexport"))

:PROPERTIES: :CUSTOM_ID: org-export-exclude-tags :END:

Tags that exclude a tree from export.
All trees carrying any of these tags will be excluded from export.
This is without condition, so even subtrees inside that carry one of the
`org-export-select-tags' will be removed.

org-ascii-format-inlinetask-function nil

:PROPERTIES: :CUSTOM_ID: org-ascii-format-inlinetask-function :END:

Function called to format an inlinetask in ASCII.

The function must accept six parameters:
  TODO      the todo keyword, as a string
  TODO-TYPE the todo type, a symbol among `todo', `done' and nil.
  PRIORITY  the inlinetask priority, as a string
  NAME      the inlinetask name, as a string.
  TAGS      the inlinetask tags, as a list of strings.
  CONTENTS  the contents of the inlinetask, as a string.

The function should return either the string to be exported or
nil to ignore the inline task.

For example, the variable could be set to the following function
in order to mimic default behaviour:

(defun org-ascii-format-inlinetask-default
  (todo type priority name tags contents)
  "Format an inline task element for ASCII export."
  (let* ((utf8p (eq (plist-get info :ascii-charset) 'utf-8))
           (width org-ascii-inlinetask-width)
    (org-ascii--indent-string
     (concat
      ;; Top line, with an additional blank line if not in UTF-8.
      (make-string width (if utf8p ?━ ?_))  "\n"
      (unless utf8p (concat (make-string width ? ) "\n"))
      ;; Add title.  Fill it if wider than inlinetask.
      (let ((title (org-ascii--build-title inlinetask info width)))
	(if (<= (length title) width) title
	  (org-ascii--fill-string title width info)))
      "\n"
      ;; If CONTENTS is not empty, insert it along with
      ;; a separator.
      (when (org-string-nw-p contents)
        (concat (make-string width (if utf8p ?─ ?-)) "\n" contents))
      ;; Bottom line.
      (make-string width (if utf8p ?━ ?_)))
     ;; Flush the inlinetask to the right.
     (- (plist-get info :ascii-width)
        (plist-get info :ascii-margin)
        (plist-get info :ascii-inner-margin)
        (org-ascii--current-text-width inlinetask info))

org-latex-active-timestamp-format "\\textit{%s}"

:PROPERTIES: :CUSTOM_ID: org-latex-active-timestamp-format :END:

A printf format string to be applied to active timestamps.

:PROPERTIES: :CUSTOM_ID: org-export-html-link-home :END:

Where should the "HOME" link of exported HTML pages lead?

org-columns-modify-value-for-display-function nil

:PROPERTIES: :CUSTOM_ID: org-columns-modify-value-for-display-function :END:

Function that modifies values for display in column view.
For example, it can be used to cut out a certain part from a time stamp.
The function must take 2 arguments:

column-title    The title of the column (*not* the property name)
value           The value that should be modified.

The function should return the value that should be displayed,
or nil if the normal value should be used.

org-koma-letter-phone-number "00-00-00-00"

:PROPERTIES: :CUSTOM_ID: org-koma-letter-phone-number :END:

Sender's phone number, as a string.

org-odt-prettify-xml nil

:PROPERTIES: :CUSTOM_ID: org-odt-prettify-xml :END:

Specify whether or not the xml output should be prettified.
When this option is turned on, `indent-region' is run on all
component xml buffers before they are saved.  Turn this off for
regular use.  Turn this on if you need to examine the xml
visually.

org-clock-total-time-cell-format "*%s*"

:PROPERTIES: :CUSTOM_ID: org-clock-total-time-cell-format :END:

Format string for the total time cells.

org-export-taskjuggler-extension ".tjp"

:PROPERTIES: :CUSTOM_ID: org-export-taskjuggler-extension :END:

Extension of TaskJuggler files.

org-agenda-entry-text-exclude-regexps nil

:PROPERTIES: :CUSTOM_ID: org-agenda-entry-text-exclude-regexps :END:

List of regular expressions to clean up entry text.
The complete matches of all regular expressions in this list will be
removed from entry text before it is shown in the agenda.

:PROPERTIES: :CUSTOM_ID: org-email-link-description-format :END:

Format of the description part of a link to an email or usenet message.
The following %-escapes will be replaced by corresponding information:

%F   full "From" field
%f   name, taken from "From" field, address if no name
%T   full "To" field
%t   first name in "To" field, address if no name
%c   correspondent.  Usually "from NAME", but if you sent it yourself, it
     will be "to NAME".  See also the variable `org-from-is-user-regexp'.
%s   subject
%d   date
%m   message-id.

You may use normal field width specification between the % and the letter.
This is for example useful to limit the length of the subject.

Examples: "%f on: %.30s", "Email from %f", "Email %c"

org-ascii-paragraph-spacing (quote auto)

:PROPERTIES: :CUSTOM_ID: org-ascii-paragraph-spacing :END:

Number of white lines between paragraphs.
If the value is an integer, add this number of blank lines
between contiguous paragraphs.  If is it the symbol `auto', keep
the same number of blank lines as in the original document.

org-table-allow-automatic-line-recalculation t

:PROPERTIES: :CUSTOM_ID: org-table-allow-automatic-line-recalculation :END:

Non-nil means lines marked with |#| or |*| will be recomputed automatically.
Automatically means when TAB or RET or C-c C-c are pressed in the line.

org-startup-with-latex-preview nil

:PROPERTIES: :CUSTOM_ID: org-startup-with-latex-preview :END:

Non-nil means preview LaTeX fragments when loading a new Org file.

This can also be configured on a per-file basis by adding one of
the followinglines anywhere in the buffer:
   #+STARTUP: latexpreview
   #+STARTUP: nolatexpreview

org-sparse-tree-open-archived-trees nil

:PROPERTIES: :CUSTOM_ID: org-sparse-tree-open-archived-trees :END:

Non-nil means sparse tree construction shows matches in archived trees.
When nil, matches in these trees are highlighted, but the trees are kept in
collapsed state.

org-agenda-time-leading-zero nil

:PROPERTIES: :CUSTOM_ID: org-agenda-time-leading-zero :END:

Non-nil means use leading zero for military times in agenda.
For example, 9:30am would become 09:30 rather than  9:30.

org-export-snippet-translation-alist nil

:PROPERTIES: :CUSTOM_ID: org-export-snippet-translation-alist :END:

Alist between export snippets back-ends and exporter back-ends.

This variable allows to provide shortcuts for export snippets.

For example, with a value of '(("h" . "html")), the
HTML back-end will recognize the contents of "@@h:@@" as
HTML code while every other back-end will ignore it.

org-lowest-priority 67

:PROPERTIES: :CUSTOM_ID: org-lowest-priority :END:

The lowest priority of TODO items.  A character like ?A, ?B etc.
Must have a larger ASCII number than `org-highest-priority'.

org-odt-convert-processes (quote (("LibreOffice" "soffic...

:PROPERTIES: :CUSTOM_ID: org-odt-convert-processes :END:

Specify a list of document converters and their usage.
The converters in this list are offered as choices while
customizing `org-odt-convert-process'.

This variable is a list where each element is of the
form (CONVERTER-NAME CONVERTER-CMD).  CONVERTER-NAME is the name
of the converter.  CONVERTER-CMD is the shell command for the
converter and can contain format specifiers.  These format
specifiers are interpreted as below:

%i input file name in full
%I input file name as a URL
%f format of the output file
%o output file name in full
%O output file name as a URL
%d output dir in full
%D output dir as a URL.
%x extra options as set in `org-odt-convert-capabilities'.

:PROPERTIES: :CUSTOM_ID: org-link-mailto-program :END:

Function and arguments to call for following mailto links.
This is a list with the first element being a Lisp function, and the
remaining elements being arguments to the function.  In string arguments,
%a will be replaced by the address, and %s will be replaced by the subject
if one was given like in .

org-clone-delete-id nil

:PROPERTIES: :CUSTOM_ID: org-clone-delete-id :END:

Remove ID property of clones of a subtree.
When non-nil, clones of a subtree don't inherit the ID property.
Otherwise they inherit the ID property with a new unique
identifier.

org-show-following-heading (quote ((default)))

:PROPERTIES: :CUSTOM_ID: org-show-following-heading :END:

Non-nil means show following heading when revealing a location.
Org-mode often shows locations in an org-mode file which might have
been invisible before.  When this is set, the heading following the
match is shown.
Turning this off for example for sparse trees makes them very compact,
but makes it harder to edit the location of the match.  In such a case,
use the command \[org-reveal] to show more context.
Instead of t, this can also be an alist specifying this option for different
contexts.  See `org-show-hierarchy-above' for valid contexts.

org-html-head-extra ""

:PROPERTIES: :CUSTOM_ID: org-html-head-extra :END:

More head information to add in the HTML output.

You can set this on a per-file basis using #+HTML_HEAD_EXTRA:,
or for publication projects using the :html-head-extra property.

org-open-directory-means-index-dot-org nil

:PROPERTIES: :CUSTOM_ID: org-open-directory-means-index-dot-org :END:

Non-nil means a link to a directory really means to index.org.
When nil, following a directory link will run dired or open a finder/explorer
window on that directory.

org-agenda-current-time-string "now - - - - - - - - - - - - -...

:PROPERTIES: :CUSTOM_ID: org-agenda-current-time-string :END:

The string for the current time marker in the agenda.

org-mobile-encryption-password ""

:PROPERTIES: :CUSTOM_ID: org-mobile-encryption-password :END:

Password for encrypting files uploaded to the server.
This is a single password which is used for AES-256 encryption.  The same
password must also be set in the MobileOrg application.  All Org files,
including mobileorg.org will be encrypted using this password.

SECURITY CONSIDERATIONS:

Note that, when Org runs the encryption commands, the password could
be visible briefly on your system with the `ps' command.  So this method is
only intended to keep the files secure on the server, not on your own machine.

Also, if you set this variable in an init file (.emacs or .emacs.d/init.el
or custom.el...) and if that file is stored in a way so that other can read
it, this also limits the security of this approach.  You can also leave
this variable empty - Org will then ask for the password once per Emacs
session.

org-odt-create-custom-styles-for-srcblocks t

:PROPERTIES: :CUSTOM_ID: org-odt-create-custom-styles-for-srcblocks :END:

Whether custom styles for colorized source blocks be automatically created.
When this option is turned on, the exporter creates custom styles
for source blocks based on the advice of `htmlfontify'.  Creation
of custom styles happen as part of `org-odt-hfy-face-to-css'.

When this option is turned off exporter does not create such
styles.

Use the latter option if you do not want the custom styles to be
based on your current display settings.  It is necessary that the
styles.xml already contains needed styles for colorizing to work.

This variable is effective only if
`org-odt-fontify-srcblocks' is turned on.

org-fontify-done-headline nil

:PROPERTIES: :CUSTOM_ID: org-fontify-done-headline :END:

Non-nil means change the face of a headline if it is marked DONE.
Normally, only the TODO/DONE keyword indicates the state of a headline.
When this is non-nil, the headline after the keyword is set to the
`org-headline-done' as an additional indication.

org-agenda-skip-deadline-prewarning-if-scheduled nil

:PROPERTIES: :CUSTOM_ID: org-agenda-skip-deadline-prewarning-if-scheduled :END:

Non-nil means skip deadline prewarning when entry is also scheduled.
This will apply on all days where a prewarning for the deadline would
be shown, but not at the day when the entry is actually due.  On that day,
the deadline will be shown anyway.
This variable may be set to nil, t, the symbol `pre-scheduled',
or a number which will then give the number of days before the actual
deadline when the prewarnings should resume.  The symbol `pre-scheduled'
eliminates the deadline prewarning only prior to the scheduled date.
This can be used in a workflow where the first showing of the deadline will
trigger you to schedule it, and then you don't want to be reminded of it
because you will take care of it on the day when scheduled.

org-agenda-restore-windows-after-quit nil

:PROPERTIES: :CUSTOM_ID: org-agenda-restore-windows-after-quit :END:

Non-nil means restore window configuration upon exiting agenda.
Before the window configuration is changed for displaying the agenda,
the current status is recorded.  When the agenda is exited with
`q' or `x' and this option is set, the old state is restored.  If
`org-agenda-window-setup' is `other-frame', the value of this
option will be ignored.

:PROPERTIES: :CUSTOM_ID: org-keep-stored-link-after-insertion :END:

Non-nil means keep link in list for entire session.

The command `org-store-link' adds a link pointing to the current
location to an internal list.  These links accumulate during a session.
The command `org-insert-link' can be used to insert links into any
Org-mode file (offering completion for all stored links).  When this
option is nil, every link which has been inserted once using \[org-insert-link]
will be removed from the list, to make completing the unused links
more efficient.

org-beamer-outline-frame-title "Outline"

:PROPERTIES: :CUSTOM_ID: org-beamer-outline-frame-title :END:

Default title of a frame containing an outline.

:PROPERTIES: :CUSTOM_ID: org-return-follows-link :END:

Non-nil means on links RET will follow the link.
In tables, the special behavior of RET has precedence.

org-koma-letter-class-option-file "NF"

:PROPERTIES: :CUSTOM_ID: org-koma-letter-class-option-file :END:

Letter Class Option File.

org-babel-inline-result-wrap "=%s="

:PROPERTIES: :CUSTOM_ID: org-babel-inline-result-wrap :END:

Format string used to wrap inline results.
This string must include a "%s" which will be replaced by the results.

org-agenda-diary-file (quote diary-file)

:PROPERTIES: :CUSTOM_ID: org-agenda-diary-file :END:

File to which to add new entries with the `i' key in agenda and calendar.
When this is the symbol `diary-file', the functionality in the Emacs
calendar will be used to add entries to the `diary-file'.  But when this
points to a file, `org-agenda-diary-entry' will be used instead.

org-export-coding-system nil

:PROPERTIES: :CUSTOM_ID: org-export-coding-system :END:

Coding system for the exported file.

org-calc-default-modes (quote (calc-internal-prec 12 ...

:PROPERTIES: :CUSTOM_ID: org-calc-default-modes :END:

List with Calc mode settings for use in `calc-eval' for table formulas.
The list must contain alternating symbols (Calc modes variables and values).
Don't remove any of the default settings, just change the values.  Org-mode
relies on the variables to be present in the list.

org-export-time-stamp-file t

:PROPERTIES: :CUSTOM_ID: org-export-time-stamp-file :END:

Non-nil means insert a time stamp into the exported file.
The time stamp shows when the file was created.

This option can also be set with the +OPTIONS line,
e.g. "timestamp:nil".

org-agenda-hide-tags-regexp nil

:PROPERTIES: :CUSTOM_ID: org-agenda-hide-tags-regexp :END:

Regular expression used to filter away specific tags in agenda views.
This means that these tags will be present, but not be shown in the agenda
line.  Secondary filtering will still work on the hidden tags.
Nil means don't hide any tags.

org-export-html-xml-declaration (quote (("html" . "<?xml versi...

:PROPERTIES: :CUSTOM_ID: org-export-html-xml-declaration :END:

The extension for exported HTML files.
%s will be replaced with the charset of the exported file.
This may be a string, or an alist with export extensions
and corresponding declarations.

org-emphasis-alist (\` (("*" bold) ("/" italic) (...

:PROPERTIES: :CUSTOM_ID: org-emphasis-alist :END:

Alist of characters and faces to emphasize text.
Text starting and ending with a special character will be emphasized,
for example *bold*, _underlined_ and /italic/.  This variable sets the
marker characters and the face to be used by font-lock for highlighting
in Org-mode Emacs buffers.

You need to reload Org or to restart Emacs after customizing this.

org-html-xml-declaration (quote (("html" . "<?xml versi...

:PROPERTIES: :CUSTOM_ID: org-html-xml-declaration :END:

The extension for exported HTML files.
%s will be replaced with the charset of the exported file.
This may be a string, or an alist with export extensions
and corresponding declarations.

This declaration only applies when exporting to XHTML.

org-export-with-TeX-macros t

:PROPERTIES: :CUSTOM_ID: org-export-with-TeX-macros :END:

Non-nil means interpret simple TeX-like macros when exporting.
For example, HTML export converts \alpha to α and \AA to Å.
Not only real TeX macros will work here, but the standard HTML entities
for math can be used as macro names as well.  For a list of supported
names in HTML export, see the constant `org-entities' and the user option
`org-entities-user'.
Not all export backends support this.

This option can also be set with the +OPTIONS line, e.g. "TeX:nil".

org-html-doctype "xhtml-strict"

:PROPERTIES: :CUSTOM_ID: org-html-doctype :END:

Document type definition to use for exported HTML files.
Can be set with the in-buffer HTML_DOCTYPE property or for
publishing, with :html-doctype.

org-beamer-theme "default"

:PROPERTIES: :CUSTOM_ID: org-beamer-theme :END:

Default theme used in Beamer presentations.

org-use-property-inheritance nil

:PROPERTIES: :CUSTOM_ID: org-use-property-inheritance :END:

Non-nil means properties apply also for sublevels.

This setting is chiefly used during property searches.  Turning it on can
cause significant overhead when doing a search, which is why it is not
on by default.

When nil, only the properties directly given in the current entry count.
When t, every property is inherited.  The value may also be a list of
properties that should have inheritance, or a regular expression matching
properties that should be inherited.

However, note that some special properties use inheritance under special
circumstances (not in searches).  Examples are CATEGORY, ARCHIVE, COLUMNS,
and the properties ending in "_ALL" when they are used as descriptor
for valid values of a property.

Note for programmers:
When querying an entry with `org-entry-get',  you can control if inheritance
should be used.  By default, `org-entry-get' looks only at the local
properties.  You can request inheritance by setting the inherit argument
to t (to force inheritance) or to `selective' (to respect the setting
in this variable).

org-show-notification-handler nil

:PROPERTIES: :CUSTOM_ID: org-show-notification-handler :END:

Function or program to send notification with.
The function or program will be called with the notification
string as argument.

org-bibtex-tags-are-keywords nil

:PROPERTIES: :CUSTOM_ID: org-bibtex-tags-are-keywords :END:

Convert the value of the keywords field to tags and vice versa.
If set to t, comma-separated entries in a bibtex entry's keywords
field will be converted to org tags.  Note: spaces will be escaped
with underscores, and characters that are not permitted in org
tags will be removed.

If t, local tags in an org entry will be exported as a
comma-separated string of keywords when exported to bibtex.  Tags
defined in `org-bibtex-tags' or `org-bibtex-no-export-tags' will
not be exported.

org-export-interblocks (quote nil)

:PROPERTIES: :CUSTOM_ID: org-export-interblocks :END:

Use this a-list to associate block types with block exporting functions.
The type of a block is determined by the text immediately
following the '#+BEGIN_' portion of the block header.  Each block
export function should accept three arguments.

org-agenda-auto-exclude-function nil

:PROPERTIES: :CUSTOM_ID: org-agenda-auto-exclude-function :END:

A function called with a tag to decide if it is filtered on '/ RET'.
The sole argument to the function, which is called once for each
possible tag, is a string giving the name of the tag.  The
function should return either nil if the tag should be included
as normal, or "-" to exclude the tag.
Note that for the purpose of tag filtering, only the lower-case version of
all tags will be considered, so that this function will only ever see
the lower-case version of all tags.

org-agenda-insert-diary-extract-time nil

:PROPERTIES: :CUSTOM_ID: org-agenda-insert-diary-extract-time :END:

Non-nil means extract any time specification from the diary entry.

org-allow-promoting-top-level-subtree nil

:PROPERTIES: :CUSTOM_ID: org-allow-promoting-top-level-subtree :END:

When non-nil, allow promoting a top level subtree.
The leading star of the top level headline will be replaced
by a #.

org-cycle-max-level nil

:PROPERTIES: :CUSTOM_ID: org-cycle-max-level :END:

Maximum level which should still be subject to visibility cycling.
Levels higher than this will, for cycling, be treated as text, not a headline.
When `org-odd-levels-only' is set, a value of N in this variable actually
means 2N-1 stars as the limiting headline.
When nil, cycle all levels.
Note that the limiting level of cycling is also influenced by
`org-inlinetask-min-level'.  When `org-cycle-max-level' is not set but
`org-inlinetask-min-level' is, cycling will be limited to levels one less
than its value.

:PROPERTIES: :CUSTOM_ID: org-link-file-path-type :END:

How the path name in file links should be stored.
Valid values are:

relative  Relative to the current directory, i.e. the directory of the file
          into which the link is being inserted.
absolute  Absolute path, if possible with ~ for home directory.
noabbrev  Absolute path, no abbreviation of home directory.
adaptive  Use relative path for files in the current directory and sub-
          directories of it.  For other files, use an absolute path.

org-refile-target-verify-function nil

:PROPERTIES: :CUSTOM_ID: org-refile-target-verify-function :END:

Function to verify if the headline at point should be a refile target.
The function will be called without arguments, with point at the
beginning of the headline.  It should return t and leave point
where it is if the headline is a valid target for refiling.

If the target should not be selected, the function must return nil.
In addition to this, it may move point to a place from where the search
should be continued.  For example, the function may decide that the entire
subtree of the current entry should be excluded and move point to the end
of the subtree.

org-export-with-todo-keywords t

:PROPERTIES: :CUSTOM_ID: org-export-with-todo-keywords :END:

Non-nil means include TODO keywords in export.
When nil, remove all these keywords from the export.

org-latex-inline-image-rules (quote (("file" . "\\.\\(pdf\\...

:PROPERTIES: :CUSTOM_ID: org-latex-inline-image-rules :END:

Rules characterizing image files that can be inlined into LaTeX.

A rule consists in an association whose key is the type of link
to consider, and value is a regexp that will be matched against
link's path.

Note that, by default, the image extension *actually* allowed
depend on the way the LaTeX file is processed.  When used with
pdflatex, pdf, jpg and png images are OK.  When processing
through dvi to Postscript, only ps and eps are allowed.  The
default we use here encompasses both.

org-latex-to-mathml-jar-file nil

:PROPERTIES: :CUSTOM_ID: org-latex-to-mathml-jar-file :END:

Value of"%j" in `org-latex-to-mathml-convert-command'.
Use this to specify additional executable file say a jar file.

When using MathToWeb as the converter, specify the full-path to
your mathtoweb.jar file.

org-html-home/up-format "<div id=\"org-div-home-and-up...

:PROPERTIES: :CUSTOM_ID: org-html-home/up-format :END:

Snippet used to insert the HOME and UP links.
This is a format string, the first %s will receive the UP link,
the second the HOME link.  If both `org-html-link-up' and
`org-html-link-home' are empty, the entire snippet will be
ignored.

org-export-section-number-format (quote ((("1" ".")) . ""))

:PROPERTIES: :CUSTOM_ID: org-export-section-number-format :END:

Format of section numbers for export.
The variable has two components.
1. A list of lists, each indicating a counter type and a separator.
   The counter type can be any of "1", "A", "a", "I", or "i".
   It causes causes numeric, alphabetic, or roman counters, respectively.
   The separator is only used if another counter for a subsection is being
   added.
   If there are more numbered section levels than entries in this lists,
   then the last entry will be reused.
2. A terminator string that will be added after the entire
   section number.

org-export-table-header-tags (quote ("<th scope=\"%s\"%s>" ...

:PROPERTIES: :CUSTOM_ID: org-export-table-header-tags :END:

The opening tag for table header fields.
This is customizable so that alignment options can be specified.
The first %s will be filled with the scope of the field, either row or col.
The second %s will be replaced by a style entry to align the field.
See also the variable `org-export-html-table-use-header-tags-for-first-column'.
See also the variable `org-export-html-table-align-individual-fields'.

:PROPERTIES: :CUSTOM_ID: org-ascii-links-to-notes :END:

Non-nil means convert links to notes before the next headline.
When nil, the link will be exported in place.  If the line
becomes long in this way, it will be wrapped.

org-bibtex-treat-headline-as-title t

:PROPERTIES: :CUSTOM_ID: org-bibtex-treat-headline-as-title :END:

Treat headline text as title if title property is absent.
If an entry is missing a title property, use the headline text as
the property.  If this value is t, `org-bibtex-check' will ignore
a missing title field.

org-html-coding-system (quote utf-8)

:PROPERTIES: :CUSTOM_ID: org-html-coding-system :END:

Coding system for HTML export.
Use utf-8 as the default value.

org-checkbox-hierarchical-statistics t

:PROPERTIES: :CUSTOM_ID: org-checkbox-hierarchical-statistics :END:

Non-nil means checkbox statistics counts only the state of direct children.
When nil, all boxes below the cookie are counted.
This can be set to nil on a per-node basis using a COOKIE_DATA property
with the word "recursive" in the value.

org-agenda-show-inherited-tags t

:PROPERTIES: :CUSTOM_ID: org-agenda-show-inherited-tags :END:

Non-nil means show inherited tags in each agenda line.

When this option is set to 'always, it take precedences over
`org-agenda-use-tag-inheritance' and inherited tags are shown
in every agenda.

When this option is set to t (the default), inherited tags are
shown when they are available, i.e. when the value of
`org-agenda-use-tag-inheritance' has been taken into account.

This can be set to a list of agenda types in which the agenda
must display the inherited tags.  Available types are 'todo,
'agenda, 'search and 'timeline.

When set to nil, never show inherited tags in agenda lines.

org-agenda-todo-ignore-timestamp nil

:PROPERTIES: :CUSTOM_ID: org-agenda-todo-ignore-timestamp :END:

Non-nil means don't show entries with a timestamp.
This applies when creating the global todo list.
Valid values are:

past     Don't show entries for today or in the past.

future   Don't show entries with a timestamp in the future.
         The idea behind this is that if it has a future
         timestamp, you don't want to think about it until the
         date.

all      Don't show any entries with a timestamp in the global todo list.
         The idea behind this is that by setting a timestamp, you
         have already "taken care" of this item.

This variable can also have an integer as a value.  If positive (N),
todos with a timestamp N or more days in the future will be ignored.  If
negative (-N), todos with a timestamp N or more days in the past will be
ignored.  If 0, todos with a timestamp either today or in the future will
be ignored.  For example, a value of -1 will exclude todos with a
timestamp in the past (yesterday or earlier), while a value of 7 will
exclude todos with a timestamp a week or more in the future.

See also `org-agenda-todo-ignore-with-date'.
See also the variable `org-agenda-tags-todo-honor-ignore-options' if you want
to make his option also apply to the tags-todo list.

org-cycle-separator-lines 2

:PROPERTIES: :CUSTOM_ID: org-cycle-separator-lines :END:

Number of empty lines needed to keep an empty line between collapsed trees.
If you leave an empty line between the end of a subtree and the following
headline, this empty line is hidden when the subtree is folded.
Org-mode will leave (exactly) one empty line visible if the number of
empty lines is equal or larger to the number given in this variable.
So the default 2 means at least 2 empty lines after the end of a subtree
are needed to produce free space between a collapsed subtree and the
following headline.

If the number is negative, and the number of empty lines is at least -N,
all empty lines are shown.

Special case: when 0, never leave empty lines in collapsed view.

org-html-table-use-header-tags-for-first-column nil

:PROPERTIES: :CUSTOM_ID: org-html-table-use-header-tags-for-first-column :END:

Non-nil means format column one in tables with header tags.
When nil, also column one will use data tags.

org-speed-commands-user nil

:PROPERTIES: :CUSTOM_ID: org-speed-commands-user :END:

Alist of additional speed commands.
This list will be checked before `org-speed-commands-default'
when the variable `org-use-speed-commands' is non-nil
and when the cursor is at the beginning of a headline.
The car if each entry is a string with a single letter, which must
be assigned to `self-insert-command' in the global map.
The cdr is either a command to be called interactively, a function
to be called, or a form to be evaluated.
An entry that is just a list with a single string will be interpreted
as a descriptive headline that will be added when listing the speed
commands in the Help buffer using the `?' speed command.

org-export-with-archived-trees (quote headline)

:PROPERTIES: :CUSTOM_ID: org-export-with-archived-trees :END:

Whether subtrees with the ARCHIVE tag should be exported.
This can have three different values
nil       Do not export, pretend this tree is not present
t         Do export the entire tree
headline  Only export the headline, but skip the tree below it.

org-mhe-search-all-folders nil

:PROPERTIES: :CUSTOM_ID: org-mhe-search-all-folders :END:

Non-nil means the search for the mh-message may extend to all folders.
When non-nil, the search for a message will extend to all other
folders if it cannot be found in the folder given in the link.
Searching all folders may be slow with the default pick based
search but is very efficient with one of the other search engines
supported by MH-E.

org-export-html-headline-anchor-format "<a name=\"%s\" id=\"%s\"></a>...

:PROPERTIES: :CUSTOM_ID: org-export-html-headline-anchor-format :END: